Crashes during the save process

Okay, so now that we’ve determined that I DO have the PrE 8.0.1 update/patch… I need to figure out why I am unable to save the video I’ve spent days working on.
As I stated in the last discussion concerning the update, I am in possession of a fairly high-speed computer that should be able to handle this kind of work.
I believe I’ve seen some other folks having problems because of the type of video they are using or importing… What kind of video should I convert to if PrE 8.0.1 doesn’t like what I am using? Oh and I have gotten the message to “Save often because you are running low on system memory” WHICH IS UNBELIEVABLE!!!
So here we go. The video that I am trying to save is approx. 10 minutes in length and is made up of still .jpg photos and videos taken from a Canon SX210 IS. I sure hope that is helpful. I looked at the file types and they are .mov files.
One other thing that may be helpful in identifying the problem… and is quite interesting… after the program crashes during the saving process, I can always go to the save location and find the entire PLAYABLE video saved in the format that I wanted (which was MP4). The only thing is that there are three separate files. 1) Complete clear audio 2) Complete clear video and 3) A third unknown file type that I can’t open. Quite strange. Oh and if you’re wondering if I tried to add open those two (Audio and Video) files in PrE and save them together yes, I did… And it crashed again.
Bob

Bob,
Here is SOMETHING to think about, regarding the Memory/Resources error messages.
This ARTICLE might be helpful at finding clues as to what could be causing the problem.
The links in this ARTICLE will help provide you with some very useful tools for checking programs and Processes, like Process Explorer.
As for the inability to Save, I would try a Save_As, and see if that helps, and does the trick. If not, try Save_As_a_Copy.
When you do Save, do you get any error messages, or does the program just not Save the Project file (.PREL)?
In case it's a system issue, can you tell us about your system in detail? Aspects like the I/O sub-system, i.e. the HDD's, their size, speed, free space, controller type(s) and how they are allocated, will be very useful.
If you are working with SD material, converting to DV-AVI Type II w/ 48KHz 16-bit PCM/WAV Audio, will be as good as it gets.
Good luck,
Hunt

Similar Messages

  • There was an error during the save process

    Hi All,
    When I try to save the data in a form, I got the following error but data was saved. Remaing forms are saving the data without any error.
    There was an error during the save process
    I found the log
    [Jul 4, 2009 4:24:17 PM]: Thread TP-Processor8 acquired connection com.hyperion.planning.olap.HspEssConnection@11d2066
    [Jul 4, 2009 4:24:17 PM]: Thread TP-Processor8 releasing connection com.hyperion.planning.olap.HspEssConnection@11d2066
    [Jul 4, 2009 4:24:17 PM]: Thread TP-Processor8 released connection com.hyperion.planning.olap.HspEssConnection@11d2066
    [Jul 4, 2009 4:24:17 PM]: Thread TP-Processor8 acquired connection com.hyperion.planning.olap.HspEssConnection@11d2066
    [Jul 4, 2009 4:24:17 PM]: Thread TP-Processor8 releasing connection com.hyperion.planning.olap.HspEssConnection@11d2066
    [Jul 4, 2009 4:24:17 PM]: Thread TP-Processor8 released connection com.hyperion.planning.olap.HspEssConnection@11d2066
    [Jul 4, 2009 4:24:17 PM]: Thread TP-Processor8 acquired connection com.hyperion.planning.olap.HspEssConnection@11d2066
    [Jul 4, 2009 4:24:17 PM]: Thread TP-Processor8 releasing connection com.hyperion.planning.olap.HspEssConnection@11d2066
    [Jul 4, 2009 4:24:17 PM]: Thread TP-Processor8 released connection com.hyperion.planning.olap.HspEssConnection@11d2066
    [Jul 4, 2009 4:24:17 PM]: Thread TP-Processor8 acquired connection com.hyperion.planning.olap.HspEssConnection@11d2066
    [Jul 4, 2009 4:24:17 PM]: Thread TP-Processor8 releasing connection com.hyperion.planning.olap.HspEssConnection@11d2066
    [Jul 4, 2009 4:24:17 PM]: Thread TP-Processor8 released connection com.hyperion.planning.olap.HspEssConnection@11d2066
    [Jul 4, 2009 4:24:30 PM]: Rebind at: Sat Jul 04 16:24:30 GMT+03:00 2009
    [Jul 4, 2009 4:25:30 PM]: Rebind at: Sat Jul 04 16:25:30 GMT+03:00 2009
    [Jul 4, 2009 4:26:30 PM]: Rebind at: Sat Jul 04 16:26:30 GMT+03:00 2009
    [Jul 4, 2009 4:27:30 PM]: Rebind at: Sat Jul 04 16:27:30 GMT+03:00 2009
    Thanks & regards,
    Sravan Kumar.

    Hi John,
    I customized the standerd Transfer BR according to my requirement. And I am using the customized form.
    I tried to change the Action in (Action is smart list) in the form, it is getting saved but with the error There was an error during the save process.
    My requirement is Action updated through BR only. But it is not updating. Previously the same BR worked fine.
    Is there any relationship between the error and the Action was not updating?
    Thanks & Regards,
    Sravan Kumar.
    Edited by: Kumar1899 on Jul 6, 2009 6:29 AM

  • Error during the save process with Planning data form

    Hi,
    When in Planning web-client, I am trying to make changes to data on a data form. The cells are level-0 members (Yellow and writeable in a bottom-up Working version). When I save, it takes a while to process the request, then gives me the following error message: "There was an error during the save process."
    The data form is fairly large, could this be causing the problem? I am a able to save data on other forms that correspond to the exact same set of members and dimensions with no problem. What are possible causes of this error? I have tried stopping and starting planning and the entire EPM system. Thank you.

    Hi,
    I believe you are using V11, I would stop planning, clear out log \Hyperion\logs\services\HyS9Planning-sysout.log, start planning, replicate the error and then going in look if the log has any more detailed information.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Urgent!! - Adobe CC crashes during the "extracting " process for Photoshop, need to install the full version of , without passing trough CC

    I need urgent support because Adobe CC crashes after the "extracting " process of an app. So if i choose to download an application ( Muse, Photoshop etc ) it downloads, and after that it crashes, is there any support available ?
    Thanks,

    Problem solved, it is the firewall who blocked the installation, everything works fine now!

  • How do I keep Adobe Premiere Elements 11 from crashing during the rendering process?

    I have already published a video, but I had to go in and make some images and texts clearer. I didn't add anything, I just changed them. Now the program will only render to 84% and them an error message pops up and asks me if I want to send a report or not. No matter what I choose, it still shuts the whole program down. I will try to re-open the program with the same file and it will just shut off. I have to restart my computer just to get back in the program. Why is it doing this and is there anything I do to fix it, in light of re-making my video?

    Try doing a Save As and renamed your video. Then render your output. This will keep your new render files from "bumping into" your old render files.
    If that doesn't work, please provide more information about your system.
    What operating system are you using? How fast is processor and how much RAM do you have? How much free, clean, defragmented space is on your hard drive?
    What model of camcorder is your video coming from and what format and resolution is it? Did you use Premiere Elements to get the video from your camcorder to your computer?
    What Publish & Share option are you using to output your video?

  • Aperture crashed during the starting process

    Hi Community,
    I´m unable to make it work my Aperture installation.
    Basically are this my configuration:
    MacBook Pro mid 2009
    OS X 10.9.1
    Aperture 3.5.1
    Final Cut Express 4.0
    I just loaded Aperture from the App Store and run the installer. But everytime when Aperture are starting up, it runs into the following error:
    Dyld Error Message:
      Library not loaded: /Library/Frameworks/PluginManager.framework/Versions/B/PluginManager
      Referenced from: /Applications/Aperture.app/Contents/MacOS/Aperture
      Reason: no suitable image found.  Did find:
              /Library/Frameworks/PluginManager.framework/Versions/B/PluginManager: no matching architecture in universal wrapper
    Anybody can help me please?
    Daniel

    Daniel,
    you need to reinstall Mavericks.  See this support article:
    Aperture 3.x: Aperture unexpectedly quits if Final Cut Express 4 is installed
    When you installed Final Cut Express, the PluginManager framework has been replaced by an incompatible version, and the safest way to restore the correct framework to your system library is to reinstall MacOS X.
    This can be done by booting into the recovery partition and then to reinstall on top of your current system,  see this link: OS X: About OS X Recovery
    Regards
    Léonie
    P.S: Don't reinstall Final Cut after reinstalling the system - if you just install the system on top of your current configuration, Final Cut should continue to work.

  • After upgrading to 27, firefox will not start. Saw an error message during the upgrade process.

    After upgrading to 27, firefox will not start. Saw an error message during the upgrade process but cannot remember.
    Tried to run firefox.exe -P but receive error message:
    XML Parsing error: undefined entity
    Location: chrome://mozapps/content/profile/profileSelection.xul
    Line number 18, Column 1:
    <dialog
    ^
    Running on Windows XP SP3. No problem whatsoever before upgrading to 27. Sending this from Chrome as I cannot open Firefox at all.

    Thanks jschaer2000: after starting it once in safe mode, I closed Mozilla and tried several restarts in normal mode. So far, all worked:-)
    Thank you very much again.
    Still the automatic update process bothers me: it took me several days to discover the reason to the malfunction, since when I removed the problematic version from Add and Remove Programs, I didn't pay attention at first that it was another version, not v26 which I installed from my folder.
    In addition, I like to save the installation files before I run new programs and if I didn't have v26 exe file, I couldn't have operated Mozilla at all. Not that it was fun to remove and install again each time v27 didn't react, but it was better than nothing, I still prefer Mozilla over its competition.

  • I have continuously over the last 6 months struggled with syncing my iphone and ipod with itunes  The app continually crashes during the picture import.  AND by the way it takes 10-15 minutes before it even attempts to import photos.  The screen says impo

    I have continuously over the last 6 months struggled with syncing my iphone and ipod with itunes  The app continually crashes during the picture import.  AND by the way it takes 10-15 minutes before it even attempts to import photos.  The screen says importing photoes but doesnt try to optimize or anything for 10 minutes.  I have a 3gs with 16Gb so its not a cheap phone.  I have 10Gb free.  I have 6600 photoes.  This is very frustrating and undermines my confidence in your products.  My ipod is an ipod 4 with 16Gb also.  It does the exact same thing to it.  The last time, I had to import photoes a few at the time and with it taking 10-15 minutes each time for 6600 photos it is a long frustrating process.  But it will import every photo a few at a time.  The error message is just that itunes has stopped working.  no hint as to why. AND of course, my phone is out of use for the entire time.  You guys must not want to believe ur phones are a necessary tool...or maybe you dont want the consumer to believe it is.  I have tried to find solutions on your website as well as through other 3rd party communities.  Ultimately they were of no use.  I stumbled onto my solution by accident since Im a bit of a computer geek...a semi-geek.

    I have this issue too, I went into my Windows event viewer. (should have looked at this a year ago when this started)
    it said this
    Faulting application name: iTunes.exe, version: 11.0.2.26, time stamp: 0x51253247
    Faulting module name: ntdll.dll, version: 6.1.7601.17725, time stamp: 0x4ec49b8f
    Exception code: 0xc0000374
    Fault offset: 0x000ce6c3
    Faulting process id: 0x14d4
    Faulting application start time: 0x01ce194399f166ba
    Faulting application path: C:\Program Files (x86)\iTunes\iTunes.exe
    Faulting module path: C:\Windows\SysWOW64\ntdll.dll
    Report Id: 0eb3c37f-8537-11e2-9351-50465d6737de
    basically whenever I try to sync my ipod touch 4G 64GB it crashes iTunes when it begins the pictures. if im lucky ill get 4-5 on there before it stops responding. its not my system or anything im running win7x64 8GB DDR3 ram (Corsair XMS3) AMD FX Eight core processor.
    It is silly that iTunes cannot add pictures to apple devices. it shatters whatever incline I may have to buy apple products. knda like the Airport Extreem router my dad bought the new firmware, caused my router to not function... why release firmware that breaks a product. -_- <-- off topic but still

  • Incopy crashed during editors save in Word on PC

    I am the reporter here, let me know if I have left out any pertinent details...The editor has input all of the corrections into the Incopy file [created from Indesign 5.5 (v7.5.1)] on her PC in Word. During the save the file crashed. When she reopened it the corrections were still visible however, she got the message, "do you want to save back to an earlier version and lose your changes." No matter if we chose, yes, no or cancel, it would not get out of the loop. After many tries she was able to get passed that, and could see that her changes were still there. She packaged the file to send back to the remote designer. The remote designer now cannot see that any changes were made. We've had this problem in the past, where the editors file crashes during save and the changes are lost. The designer has ended up having to input the corrections into the indesign file:( Any help would be greatly appreciated.

    You said:
    The editor has input all of the corrections into the Incopy file on her PC in Word.
    What exactly does that mean?
    And all ID and IC users should be patched to 7.5.2.
    Bob

  • "Errors found during the burning process"

    Hello,
    I created an iDVD project that includes:
    1. 108-minute movie
    2. 6-minute movie
    3. 3-minute movie
    4. 12-minute slide show (3 four-minute slide shows)
    The project worked fine in the iDVD Preview. I then attempted to burn the DVD right from iDVD, and after 8 hours of encoding, I got the "Errors found during the burning process" message.
    I've read so many posts here with a hundred different possible solutions, but what is the best place to start to try to determine what the errors are and how to fix them?
    Following one suggestion, I am now creating a Disk Image first, but if errors still exist with a Disk Image, what do I do then?
    I'm working on a Powerbook G4 with the iLife upgrade. Thanks for any advice.
    Larry

    Larry,
    Here's my philosophy on iDVD troubleshooting, largley based upon my experience here at this forum, with heavy doeses of input from Ken Tidwell, Len Goff, Old Toad, F Shippey, with more recent input from SDIllini, Hui Cheng, and Beverly M.......
    #0 - always use "Save as Disk Image" instead of burning when troubleshooting iDVD
    #1 Try the easy usual suspect fixes first! After all if these don't work you can always try the hard fixes!
    Check the list on this download:
    http://dvd.kentidwell.com/iDVDUOFAQ2005.pdf
    But here are easy solutions IMHO:
    Get free space on the startup drive -20GB recommended
    Delete the iDVD plist file com.apple.iDVD.plist
    Repair Disk Permissions
    Clear Cache Files (CacheOutX, TigerCacheCleaner, Onyx)
    Do you have 12 bit audio - check your camcorder.......if not 16 bit you will have problems
    Fix Chapter Markers-don't put one at the beginning in iMovie (iDVD will do it for you)
    Chapter Markers - don't put one at the end.
    Chapter Markers - don't put one within 2 secs of a transition
    Delete other corrupt preference files (try using Preferential Treatment)
    #2 When the easy fixes don't work, you need to divide and conquer. The suspects are your a) your project media, b)your hardware, c)your system/user preferences, d)iDVD.
    A good test for a&d is to build a simple test project with other photos/movies/themes/audio and see if you can "save as disk image" the test project. The iDVD4 tutorial project is great if you've ever had iDVD4 installed on your machine. If this works it suggests that iDVD is working OK, and that something in your project is causing the hiccup.
    The most common problems in projects are CMs, audio and transitions. One way that sometimes clears them up is to export to full quality DV (or to tape!) and re-import into iDVD. In slideshows, funny JPEGs can bring iDVD down. The only method here is to try different groups to find the bad actor.
    OK let's assume that you can't burn (I mean "Save as Disk Image") the test project or the tutorial. This suggest that your hardware/system/iDVD is having problems and your project is probably fine. Then what?
    c) Hardware: if you can make a disk image but can't burn it, or it plays badly, then try creating a data DVD - if you can't do that I'd suspect your DVD drive. Try different brands of DVD-R (and I'd stick to -R, not +R nor +RW), I like Verbatim. Next on the suspect list is RAM. iDVD is the best test for RAM known to mackind. Try pulling non-Apple supplied modules and try again.
    OK, let's assume you can make data DVDs, but you can't make a good disk image, and you've tried pulling all non-Apple RAM. What next?
    Try creating a new user. New users have more limited sets of fonts and all new preference files and caches, not only for iDVD but for everything, and few (if any) third party plug-ins installed.
    Finally try reinstalling iDVD.......
    If you've done all this, a new system install might be in order, but come here first for advice from others before going that far!
    john b

  • Idvd5.01 Errors were found during the burning process (Burned Finished)

    I've never had this problem before, but i'm trying to burn a dvd after all the media and dvd are ready for burning and when I click on the burn icon the following message pops up: Errors were found during the burning process. I've check to make sure nothing is hanging outside the title safe area. Any suggestion to why I'm getting this error.

    Hello, Oscar,
    This message can mean several things.
    First, are you burning an iMovie or a slideshow or both?
    Do you have chapter markers in your movie? Are they on or withing 2 seconds of any transition or at the beginning of your movie?
    Does everything encode properly?
    Are you able to 'save as disk image'?
    Post back with some more details about your project.

  • Errors were found during the burning process!?!?

    I finished importing a movie off of my DV Camera and clicked "share" in the iDVD '06 menu. I selected iDVD and my movie was sent into iDVD 6. After customizing a menu, and inserting a blank disc, the burning process was started. After iDVD6 has finished "processing" and "rendering" the menus and the movie, the progress bar for the action "burning your DVD" pops up. About a quarter of the way through I get a window which says the following:
    Burning Finished
    Errors were found during the burning process.
    After clicking "Details" it says:
    The recording device reported the media error: Write error. (0x0C, 0x00.)
    I have tried burning a movie on all DVD types available.(DVD-R DVD+R DVD RW) Why does this problem keep occurring? Is there a problem with my superdrive?

    Hello Ilzmaster,
    the cause could be your burner, but it's much more likely that high burn speed is the culprit - and you can't control that in iDVD.
    Try creating a disk image (File > Save as Disk image). This creates an .img file on your HDD, that can be stored for future use and gives you the option to preview your DVD on your Mac before burning to disc.
    Next use Disc Utility or Toast to burn your DVD at slow speed. 4x is acceptable, 2x (... or even 1x) is better.
    Use only high quality DVD-R (not DVD+R) media (e.g. Verbatim) to minimize burn errors and compatibility issues. Make sure the DVD is compatible with slow burn speed (e.g. 1x-4x)
    Also: iDVD likes to have the project(s) on your startup disc with 15 - 20 GB of available disc space
    hope this helps
    mish

  • Properties Files during the build process.

    Hi everyone, I have a question about files inside the src directory and how they relate to files in the /WEB-INF/classess directory.
    From what I've read, eclipse copies the files inside "src" into "WEB-INF/classes" when building a project.
    Inside my "src" folder I have a few properties files for my application, let's call them qe.properties, production.properties and final.properties
    When I build my app (using Ant) I currently copy qe.properties into final.properties when building my application in QE. And production.properties into final.properties when building my application for production.
    Here is the command:
    <copy file = "src/qe.properties" tofile="src/final.properties" overwrite="true" />
    Every once in a while a production build will have a qe properties file and vice versa (a qe build will have a production properties files).
    I tried changing this using a symbolic link but I ran into the same issue, and worst yet, the file that get's copied inot "WEB-INF/classess" is not a symbolic link it simply contains the contents of the symbolic link.
    How can I get around this issue?

    I replaced the files with new files they are in the same location but they have different names.  It still does not work.
    It's very frusterating.
    Everytime I make ANY changes to my original files I need to rebuild in encore.  For example, I have a dynamic link and I adjust a transition and then resave.  I have to build in encore from scratch (it will not build).
    When encore works if I just save my encore file, close and then reopen it does not work anymore.
    If I render the files and change anything in encore it does not work.
    BTW the preview works perfectly.  It just freezes during the Build Process.
    I also tried to build an image and this did not work (it froze too).
    I'm assuming CS5 works with intel i7 and windows 7 and 8GB of Ram per the Adobe requirements.
    Any other ideas (other than leave every instance of Encore up and never close the program down)?
    Jonathan

  • My computer freezes up when trying to upload photo book from iPhoto '11. This happens during the upload process.

    My computer freezes up when trying to upload photo book from iPhoto '11. This happens during the upload process.
    When this happens I need to close down the computer and restart.
    Any ideas ?
    I've got Mountain Lion running.
    I'm on a 13" white MacBook with 8GB RAM installed.
    I recently had a 1 TB hard disc installed at the Apple store.

    can you preview it? -
    Before ordering your book preview it using this method - http://support.apple.com/kb/HT1040 - and save the resulting PDF for reference - the delivered book will match it.
    If that works fine and you still have problems boot into safe mode and try again
    LN

  • Problem: An error occured during the uploading process.

    Hello!  I've searched around but I am having difficulty finding a solution to this problem.
    I am trying to upload videos through Adobe Premiere Elements 9 to YouTube, using the preset options in the share tab.  This worked previously without issue, but then one day I continually ran into an error stating "Sorry, an error occured during the uploading process.  Please try again later."  However, it eventually started working.  It is now a few weeks later, and I am having the very same issue.  I am unable to upload to YouTube or any other service through the Share tab.  Even loading the software itself, the opening splash screen is unable to grab my Adobe ID.  It never stops "Gathering User Info..."
    Steps I have tried:
    Going to Edit -> Preferences -> Web Sharing and hitting the refresh button to update settings.
    Checked router settings.
    Enabled DMZ on router and linked it to this specific computer.
    Rebooted PC and router, and tried updating the Web Sharing settings multiple times.
    I honestly do not believe it to be a router issue, especially since it is currently in DMZ mode and I have had absolutely no trouble with any other software.  This has continued to baffle me though, and finding help is difficult.  Searches keep giving me encoding settings for YouTube videos, and few results pertain to this particular issue.
    I am aware I could export the video normally and upload through YouTube that way, but on DSL, my upload speed is pretty terrible for a high quality video.  The YouTube HD setting has been great for me in the past, as files are small but still look great online.  I would really like to get it working again, both for ease and convenience for simple projects.
    If anyone has any ideas as to what could be causing a problem, I would be greatly appreciative of any advice.  In regards to the project itself, there is no real editing being done at this point, as I am trying to eliminate any possibility of error elsewhere. I opened a new project, added a video clip and went directly to upload it, resulting in the error above.
    I don't believe it matters in this situation, but just in case:
    Windows 7
    AMD Phenom II X4 820 - 2.80 GHz
    6 GB RAM
    Radeon HD 5880 1GB
    Connecting through a Netgear WNDR3400 router, standard DSL connection.

    Sorry, not seeing where to edit my original post.
    Just wanted to add, that I am able to visit both the Photoshop.com website, as well as YouTube through my browser.  So I am not being blocked somehow to those particular sites.  It only seems to be through the software that I cannot connect to any of the online services to upload videos to.
    Additionally, the only virus software running is Microsoft Security Essentials.  It has never raised a flag before with this software or caused interference in the past.  I do not use Norton or any other service which are known to interfere with programs often.
    Just a quick example as well, pinging Photoshop.com through the command prompt shows I am getting through just fine.  As you can see in this image though, it cannot seem to ever connect and grab my user information.
    http://i.imgur.com/S53xN.png

Maybe you are looking for