Crashes when audio interface is plugged in

I am using a mac book pro 13" intel 2.5ghz dual core with 4g ram and nvidia 9400m graphics card every time i plug my tascam us-122mkII audio interface into my usb port and attempt to start FMLE it crashes giving me error audio device something or another dont remember exactly what it says, I have all the prober drivers installed for my interface and have it selected in my system preferrences as the main input device. Anybody know why it would do this?
i am using this set up to stream live church services and need the interface so i can pull live feed from the soundboard

Hey jcsinchak,
Thanks for the question. I understand you are experiencing issues with iTunes unexpectedly freezing/quitting. The following articles may help to resolve your issue, based on your operating system:
iTunes for Windows XP: Troubleshooting unexpected quits, freezes, or launch issues
http://support.apple.com/kb/TS1421
iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
http://support.apple.com/kb/TS1717
iTunes: May become unresponsive when connecting iPhone, iPad, or iPod touch
http://support.apple.com/kb/TS3219
Thanks,
Matt M.

Similar Messages

Recommended audio interface to plug guitar into Garageband.

I have a 2013 Macbook Pro Retina with latest Yosemite update. I'm trying to learn how to use Garageband. If I use a USB guitar lead I get a terrible howling beeping noise when "monitor" or recording. It is a new good quality USB Guitar lead. I don't think it is faulty. Is there anything I can do to quiet down the cacaphony?Internet research says I need an audio interface, either USB or Firewire. The USB is obvious but I don't quite know what to use the Thunderbolt ports for (I've never used them whatsoever).
If any Garageband guitarists guru can point me in the right direction on what to do here I'd be grateful.

Thank you isteveus for your reply.
I can confirm that I am using the "USB PnP sound device" input as the recording device, as I go into the Garageband preferences I select that and the output as either "system settings " or "built-in output".
The noise is there with headphones or without and with the lead plugged into the guitar or not. I can remove the noise by playing with various volume controls on the amp models but then I can't hear anything. I've also tried running the guitar through a small mixing desk and then using the usb lead from the mixer into the computer but to no effect, howling beeping feedback is still there.
Thank you for your help

Skype crashing when audio starts

I am attempting running Skype on Windows 7 64 bit (Deskside PC)
Whenever I attempt to use sound - either answering a call / making a test call / setting up audio - Skype crashes - so I simply cannot use Skype .
I have Realtek High Definition Audio installed (card plugged into motherboard) and selected as the system creating sound through my speakers (works fine on other sound-generating software)
Also have ASUS Xonar DG Audio installed (came with motherboard - not used as I have the Realtek audio board installed)
Anyone any suggestions on how to get Skype working on my PC!?!?!?!

You may want to try disabling one of your audio devices. So if it's onboard, try going as far as disabling it in the BIOS. You could also try upgrading to the latest Realtek drivers, to see if that changes anything.
If the problem persists you may want to try an older version of Skype to see if it crashes.
Skype 6.1
http://download.skype.com/msi/SkypeSetup_6.1.0.129.msi

XCode 3.1 Crashes when iPod touch is plugged

Hello
I had an old iPhone SDK, where there is no iPhoneOS and iPhoneOS Simulator yet ,
instead of them, it contains Aspen and Aspen Simulator.
When my iPod is connecting and xcode tries to upload app I get the
error. (i had not signed it from apple yet, it's in progress now, so i
get error during upload)
Some days ago, I download latest iPhone SDK, and after installing it,
i have a problem - when iPod Touch is plugged, xcode crashes, because it can't
get a _AMDevice...USBID symbol. at
system/library/privateframeworks/mobiledevice.framework/versions/a/mobiledevice
I tried to replace this framework, from older sdk, but the problem
does not disappear. then I replaced
developer/platforms/iPhoneOS.platform/developer/library/xcode/plug-ins/iPhoneRem oteDevice.xcodeplugin
by file from oldest sdk, from aspen platform,
developer/platforms/aspen.platform/developer/library/xcode/plug-ins/aspensupport .xcodeplugin
after doing that, xcode does not crash anymore, but when i try to
upload my app to iPod i get an error that "not provisioned iPhone OS
device is connected", and iPod does not react to this, and I noticed
that the time between clicking build'n'go and the appearing of this
error is too short, imho. i think there is no attemt to connect to the
device, but in the organizer iPod is present.
SDK was installed after updating to iTunes 7.7, BTW, iTunes also crashes during upload apps.
I can't understand how i can fix this.
So is it correct to replace new xcodeplugin, by oldest xplugin from other sdk ?
Please advise.

which build of SDK need to use ?
can someone give iPhoneRemoteDevice.xcodeplugin from developer/platforms/iPhoneOS.platform/Developer/Library/XCode/Plug-ins
and MobileDevice from /System/Library/PrivateFrameworks/MobileDevice.framework/Versions/A
I already try some builds, but only one work with iPod, but there is no iPhoneOS platform, only Aspen
BTW, what difference beatween Aspen and iPhoneOS ?

Macbook Pro crashes when External HD is plugged in

Hi,
Was wondering if anyone else had experienced their Mac crashing when attaching an external HD or had any suggestions on how to recover the data?
When I attach the drive, the screen freezes for a second and reboots the whole machine. I then get the grey screen which says "Your computer has been restarted because of a problem. Press a key or wait a few seconds before starting up"
Have tried to attach the hard drive to a different Mac Book but had the same issue. Until this happened I had no other issues with the drive, it had been working perfectly.
Any advice would be very much appreciated!

Step one would be to try another cable or connection type, but since you've provided no info on the HD or enclosure, there's no way to provide a viable answer.
iMac refurb (27-inch Mid 2011), OS X Mavericks (10.9.4), SL & ML, G4 450 MP w/Leopard, 9.2.2

P55CD-53 Freezes/crash when a device is plugged at back panel(usb,audio ports)

Hello, I'm a new P55CD-53 user and I have a problem with my board's back-panel ports(usb, audio).
Whenever I plug a device at the back panel, my computer freezes or restarts. :(

@claykin
Its only an old AVR(from my old p4 computer,previous than the previous one). My UPS's battery that I used with my previous computer(after P4) died, it can not hold any charge now.
@Wonkanoby
Quote from: Wonkanoby on 08-April-10, 02:13:16
YOU HAVE GOT THE STAND OFFS RIGHT ONLY UNDER THE SCREW HOLES?
Can you please rephrase this or explain further about the stand off and screw hole part. Sorry I'm not a native english user and my english sux.

Macbook won't start up while firewire audio interface is plugged up

I have a m-audio firewire solo and a presonus firebox, both firewire interfaces. My macbook won't start up when either is plugged up. If I restart with it plugged up I just get a grey screen. When I disconnect it I boot up fine. Is this normal or is something wrong here?

Wire Bus:
Maximum Speed: Up to 400 Mb/sec
FW Solo:
Manufacturer: M-Audio
Model: 0x10062
GUID: 0xD6C0B007E03B7
Maximum Speed: Up to 400 Mb/sec
Connection Speed: Up to 400 Mb/sec
Sub-units:
FW Solo Unit:
Unit Software Version: 0x10001
Unit Spec ID: 0xA02D

Satellite X200 SLI crashes when HDMI cable is plugged

Hi everybody,
I have X200-21K and since the very beginning the HDMI port doesn't work well - every time the HDMI cable is plugged in the blue screen appears and computer crashes. It behaves same in both SLI and non-SLI modes. The same result is even if I try to boot up with the cable already plugged in - in this case the DOS mode shows up ok on my TV but when Vista tries to load up it crashes again.
I really like the notebook but this starts to annoy me as I can't use the product the way I expected. In the previous thread somebody said it's going to be solved by drivers but there's no updated drivers available.
Does anybody have still the same problem or has somebody been able to solve this? Or do I have to place a warranty claim (I'd really like to avoid this)?
Thanks for help.

Hello
I recommend you to use different HDMI standards (HDMI 1.0, 1.1, 1.2, 1.2a, 1.3). As far as I know there are different HDMI versions. Please talk with your local dealer and test it with some high quality cable.

Crash when using Dimensions version plug-in - key Failed to {0} file {1}

Oracle JDeveloper 11.1.1.3.0 (JDEVADF_11.1.1.3.PS2_GENERIC_100408.2356.5660)
Versioning Support (for Dimensions) 11.1.1.3.37.56.60
I've used "Versioning | Configure" to disable SVN support so that Dimensions is my only enabled extension. No matter what I have selected in the Application Navigator, I cannot get anything enabled on the 'Versioning' menu other than Download and Configure. If I download, I'm prompted to login (testing the connection works fine), and then the "Log Out" menu option is enabled, but no others.
I've got an application with one project that I've created and added to Dimensions via the Dimensions client. Attempting to download this project into JDeveloper using either the "Download" option from the versioning menu, or the right-click | download from the "Versioning Navigator" fails. If I do it from the Versioning menu, I get the 'Download' dialog and the OK button is enabled, but after entering a destination and clicking OK nothing happens (no error, dialog remains).
If I use the Versioning Navigator and right-click, I can select my Dimensions project, enter a destination, and click ok and a crash occurs. Details of the error are below:
Performing action Download...[ from oracle.jdevimpl.vcs.nav.VersioningNavigatorManager$2 ]
Invoking command: [ from oracle.jdevimpl.vcs.nav.VersioningNavigatorManager$2 ]
java.util.MissingResourceException: Can't find resource for bundle oracle.jdevimpl.vcs.dimensions.res.Resource, key Failed to {0} file {1}
j.util.ResourceBundle.getObject(ResourceBundle.java:384)
j.util.ResourceBundle.getObject(ResourceBundle.java:381)
j.util.ResourceBundle.getString(ResourceBundle.java:344)
o.ji.vcs.dimensions.res.Resource.get(Resource.java:23)
o.ji.vcs.dimensions.res.Resource.format(Resource.java:31)
o.ji.vcs.dimensions.session.DMVersionOperation.convertToDMException(DMVersionOperation.java:98)
o.ji.vcs.dimensions.session.DMDownload.downloadFolder(DMDownload.java:84)
o.ji.vcs.dimensions.nav.cmd.DMDownloadCommand$1.doInvocation(DMDownloadCommand.java:308)
o.j.vcs.spi.VCSDirectoryInvokable.runInvokableImpl(VCSDirectoryInvokable.java:199)
o.j.vcs.spi.VCSDirectoryInvokable.runInvokable(VCSDirectoryInvokable.java:117)
o.ji.vcs.dimensions.nav.cmd.DMDownloadCommand.invokeCommandImpl(DMDownloadCommand.java:258)
o.ji.vcs.dimensions.op.DMAbstractOperation$1.doCommitOperation(DMAbstractOperation.java:102)
o.j.vcs.spi.VCSDialogCommitter$1.run(VCSDialogCommitter.java:82)
Any thoughts?

I get that error too, only when checking in a new item.
Got it in Dimensions 2009R02 and 2009R03
/Kim

After Effects Crash when audio file is dragged to layers panel, but not when dragged to comp window

Ok, so this is an odd one, and as it has a work around its not a huge issue, but it would be good to get to the bottom of it.
If I load an audio file of any type (wav, aiff, mp3 etc) into the project window everything is fine, however if I drag it down to the composition layers panel I get a crash.
However, if I drag the file to the composition widow (to the right) this does not cause a crash, and now that this has loaded the audio file in question I can drag it freely wherever I like without a crash. However if I import a different audio file and drag it downward to the composition layers panel it crashes again.
I am running cs5.5 upodated to the latest 10.5.1.2 and running Mountain Lion.
Crash report

Ok, so I figured out what is causing the crash... why I do not know.
I had a background texture that was very large (5184x3456) that was hidden. If this layer was unhidden then it did not cause the crash, no other hidden layers caused the crash.
I re-sized the layer in photoshop to comp size, then re-inserted this image. It now works without a problem.
So I have solved my own problem here, would still like to know why it happened if anyone can shed some light on this?

Router Crashing when ATM Interface under Heavier Load

Hi all,
Looking for a little guidance before I engage TAC (AKA, waiting for maintenance contract purchase approval). I have a 3945 router running IOS 15.1.2T5 with an ATM interface card and adapter. It is currently configured with a 30Mbps PVC. As it reaches about 20 to 21Mbps and 14000 packets per second, I start to see output drops on the interface, which I had previously attributed to a combination of ATM overhead + volume of traffic being pushed through it. About half of the traffic that passes through is VoIP, so it is a lot of smaller packets, which hurts on ATM overhead, if I recall correctly. Starting yesterday, though, the circuit peaked at 23Mbps and 17000 packets per second. About 5 minutes, later, the router crashed and rebooted itself. Crash info reports the following:
PCIe Interrupt - Root Complex 0
Last PCIe Read CFG Data = 0x81000030
Last PCIe Write CFG Data = 0x81000034
Last PCIe CFG Op: Write
PCIe Interrupt: Error Detect Reg = 0x80100000
PCIe Err Enable = 0xBC8000 PCIe Err Cap Status = 0x5
PCIe Err Cap R0 = 0xC000040 PCIe Err Cap R1 = 0xFF000004
PCIe Err Cap R2 = 0x20000000 PCIe Err Cap R3 = 0xAAAA0300
Fatal PCIe error - Multiple Errors Detected
Fatal PCIe error - Inbound transaction was not mapped to any inbound window
%Software-forced reload
12:24:26 CST Mon Dec 29 2014: Unexpected exception to CPU: vector 1500, PC = 0x4A3A114 , LR = 0x4A3A0AC
-Traceback= 0x4A3A114z 0x4A3A0ACz 0x4A3DF54z 0x4124D00z 0x4124D00z 0x4A3E010z 0x6644898z 0x664480Cz 0x6644B04z 0x6621B94z 0x8F86324z 0x8DBCF4Cz 0x8DD0420z 0x8DD0A60z 0x8DAE54Cz 0x8DAEE84z
Plus the various memory dumps.
This has happened 3 times now and in all cases, traffic levels have been the same just before the crash.
Any help in understanding why this is happening would be appreciated and thanks in advance.
-Gary

Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
Unless you really need your particular IOS version, like Leo, I too would recommend moving to a mainline recommended release that suites your needs.
PS:
It's likely you're correct that you're seeing drops before you hit your ATM "bandwidth" cap. The ATM cell "tax" is a 5 byte header in each 53 byte cell and, if doing IP, there's cell padding (packets will sized up to the next multiple of 48).
For example, a 97 byte payload would consume 159 bytes (about 39% overhead).

Soundtrack Pro crashes when I open Waves Plug-ins

I'm using Soundtrack Pro 3 to master audio i've created in Logic Studio. Waves plug-ins (principally, the Q-series eg plug-ins) cause Soundtrack Pro to freeze.
I've re-installed all plug-ins, but no joy. Should I re-install Soundtrack Pro? Does this mean wiping and re-installing the entire Logic Studio?

The workaround I used was to just export the whole thing without saving, and then reimport it into FCP. It works for this project, but it doesn't really seem like the RIGHT way that this whole operation should work!

USB audio Interface distortion/static when sound is played.

My USB audio interface started sending out static/distortion to my speakers one day. It's more apparent when volume is very very low. To troubleshoot I switched to the other USB port and it worked fine for a month or so. Now the second USB port is creating static. I have reason to believe it's the computer not my interface as there was static on one usb port and none on the other. Now both ports create static. Is there something in my computer I can try reseting or should I look into getting a new interface?
Thank you in advance for any guidance with this.
Andy
13" MacBook (Late 2008) 2.4Ghz w/ OS X 10.6.6

No noise problems when the interface is plugged into other systems.. Only on the G5...
And I tried plugging it into all the different USB ports on the G5, the one in front and the two in the back... All with the same result.
Thank you for your reply.

Why is my 15" rMPB crashing when using 2 Thunderbolt Displays?

Over the last few days my 2012 15" rMBP has been crashing periodically.
Today it continued to crash every few minutes, I tried resetting PRAM and SMC - didn't seem to help. After reading somewhere (not here) people having issues with Multiple external Displays, I onlly plugged in one of my 2 Thunderbolt Displays and it seems to be stable.
In my normal set up I use 2 - 27" TBD's and a 55" Sanyo TV via HDMI - it has worked great for over a year but now I am experiencing continued crashing when I have everything plugged in.
Is this a known issue?
I think this may be an issue with the last update - which was installed on my rMBP on the 9th or Jan (only 9 days ago)... that is about when I first started noticing an issue.
Is there anything I can do?

Welcome to Apple Support Communities
Note that your MacBook Pro is using the dedicated GPU and you have got two GPUs. The dedicated GPU generates more heat, and even more if you are using the GPU to display image in three displays (including your built-in display). I would not be worried if fans are working correctly

Help! my ipod is making itunes crash as soon as i plug it in

i'm running osx 10.5 and itunes 9.0.2, my ipod is a 4th gen nano. everything has been working fine until yesterday when i was importing some music and itunes just crashed out of the blue. i had my ipod plugged in at the time but every time i tried to reopen itunes it gives me the spinning beachball of death and crashes, then i get that "application has unexpectedly quit" message. so i unplugged my ipod and restarted my g4. now itunes will open and work fine but as soon as i plug in my ipod the beachball pops up and itunes crashes. the ipod is however showing up on the desktop. so far i have uninstalled completely and reinstalled itunes, and repaired my permissions with both DU and drive genius, but itunes still crashes when my ipod is plugged in. please if anyone has suggestions i would really appreciate some help, this is very confusing. thanks.

Delete all the plist files and also try removing and reinstalling itunes.... if that doesn't work, call 1800MYAPPLE for free support.

Crashes when audio interface is plugged in

Similar Messages

Maybe you are looking for