Crashing after logic board has been replaced

I recently had to get my logic board replaced and now my computer crashes often. I've done a diagnostic on the hard drive using SMART Utility and it says that the hard drive passes the evaluation. I've repaired permissions, reset the PRAM and the SMU. What is causing this problem and how do I resolve it? Do I need to take it into the Apple Store again?

beatlelili wrote:
Do I need to take it into the Apple Store again?
I most definitely would.

Similar Messages

Grey restart and program crashes after logic board replacement?

Apologies for if a thread already exists for this, I had a look around and nothing seems to quite fit the problems I'm experiencing-
I recently got the logic board replaced on a 13-inch macbook pro, osx lion, 10.7.5. I got this done because of the failure of one of the usb ports and the centre row of typing keys.
however (although the keys and usb now work), after the replacement, I have started to experience problems that weren't present before. These include:
programs spontaneously crashing, examples being safari, itunes, and photoshop
the computer spontaneously going into the grey textured screen and restarting all programs, but seemingly not initiating a full shut-down and restart
itunes has deauthorised me and claims that there are already 5 computers authorised to the account. No new computers have been authorised during the repair time and attempts to deauthorise and reauthorise fail, this was not present before the repairs.
video playback on youtube and similar sites can sporadically cut out completely, either freezing or causing the entire video 'screen' to white out or vanish
playback of other moving graphics such as gifs often is jerky or replaced with transparent or white frames
I've updated all my software to the latest versions just in case it was simply that I wasn't up to date with something, but to no avail. Is this a common error with a solution, or am I going to have to get the logic board replaced again? I'm still within my three-year warranty, but I don't appreciate the concept that I brought in my machine to be fixed, and it came back even more broken.
(safari crashed during writing this, here is the crash report in case that helps)

There's a 90-day warranty on the repair.

Replace Empty Ink Cartridge message flashes after the cartridge has been replaced

Printer is C61P50 All in One.
Has been printing black only, but this morning it said it could not continue unless the empty Magenta cartridge was replaced. I bought a new one, installed it, and still get the same message.
Occasionally I get another about the light blue cartridge ink being expired. That I can clear by hitting OK, but then I am back to being hung up on the supposedly empty magenta which I have already replaced with a brand new one.

Hello palang,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I am sorry to hear about the ink cartridge issue you are having with the Magenta. I have looked into this for you and suggest completing all of the steps in the troubleshooting guide below. I hope this helps resolve this for you!
'Ink Cartridge is Missing, Incorrectly Installed, or Not Intended for Your Device' Error Message is ...
Regards,
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Computer shuts down and starts up by itself. I have 27" mid-2011 model. Has been like this for 2 years now. The hard drive and the mother board has been replaced already. No help, the problem still returns.

This morning it started again.
When I write the word "shut" to console it says:
kernel[0] Previous shutdown cause: 0
locationd[55] locationd was started after an unclean shutdown
kernel[0] Previous shutdown cause: -128
locationd[55] locationd was started after an unclean shutdown
locationd[54] locationd was started after an unclean shutdown
kernel[0] Previous shutdown cause: 3
Yosemite is installed. But the problem has happened with every operating systems.
Disk utility can't find any problems.
No usb or other devices are connected.
I deleted the file: com.apple.PowerManagement.plist (someone suggested that it may help)
I think it's not the matter of heat, because the problem occurs right away when starting my comp.
With a safe mode it sometimes stays up for hours. So could it be a problem with applications, rather than hardware?
Help is highly appreciated!
Thank you!

Thank you, I did ran etrecheck.
Here's the result.
Now my computer did shuts down even in safe mode, sometimes in seconds.
So I have to keep this short.
Hardware Information: ℹ️
    iMac (27-inch, Mid 2011)
    iMac - model: iMac12,2
    1 2.7 GHz Intel Core i5 CPU: 4-core
    4 GB RAM Upgradeable
        BANK 0/DIMM0
            2 GB DDR3 1333 MHz ok
        BANK 1/DIMM0
            2 GB DDR3 1333 MHz ok
        BANK 0/DIMM1
            Empty
        BANK 1/DIMM1
            Empty
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
    AMD Radeon HD 6770M - VRAM: 512 MB
        iMac 2560 x 1440
System Software: ℹ️
    OS X 10.10.1 (14B25) - Time since boot: 0:2:47
Disk Information: ℹ️
    ST2000DM001-1CH164 disk0 : (2 TB)
        EFI (disk0s1) <not mounted> : 210 MB
        Macintosh HD (disk0s2) / : 2.00 TB (1.68 TB free)
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
    OPTIARC DVD RW AD-5680H
USB Information: ℹ️
    Apple Inc. FaceTime HD Camera (Built-in)
    Apple Inc. BRCM2046 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Computer, Inc. IR Receiver
    Apple Internal Memory Card Reader
Thunderbolt Information: ℹ️
    Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
    Mac App Store and identified developers
Kernel Extensions: ℹ️
        /Library/Extensions
    [not loaded]    com.wacom.kext.ftdi (1 - SDK 10.9)
        /System/Library/Extensions
    [not loaded]    com.wacom.kext.wacomtablet (6.3.10 - SDK 10.9)
Problem System Launch Daemons: ℹ️
    [failed]    com.apple.systemstatsd.plist
    [failed]    com.apple.ucupdate.plist
    [failed]    com.apple.watchdogd.plist
Launch Agents: ℹ️
    [not loaded]    com.adobe.AAM.Updater-1.0.plist
    [not loaded]    com.adobe.AdobeCreativeCloud.plist
    [not loaded]    com.wacom.wacomtablet.plist
Launch Daemons: ℹ️
    [not loaded]    com.adobe.adobeupdatedaemon.plist
    [not loaded]    com.adobe.fpsaud.plist
    [not loaded]    com.microsoft.office.licensing.helper.plist
User Launch Agents: ℹ️
    [not loaded]    com.adobe.AAM.Updater-1.0.plist
    [not loaded]    com.adobe.ARM.[...].plist
    [not loaded]    com.spotify.webhelper.plist
User Login Items: ℹ️
    iTunesHelper    Ohjelma (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
    Spotify    Ohjelma (/Applications/Spotify.app)
    SpyderUtility    Ohjelma (/Applications/Datacolor/Spyder4Pro/Support/SpyderUtility.app)
Internet Plug-ins: ℹ️
    AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7
    FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6
    QuickTime Plugin: Version: 7.7.3
    AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6
    AdobePDFViewer: Version: 11.0.10 - SDK 10.6
    Flash Player: Version: 16.0.0.305 - SDK 10.6
    Default Browser: Version: 600 - SDK 10.10
    SharePointBrowserPlugin: Version: 14.1.0
    Silverlight: Version: 5.1.30514.0 - SDK 10.6
    WacomTabletPlugin: Version: WacomTabletPlugin 2.1.0.6 - SDK 10.9
3rd Party Preference Panes: ℹ️
    Flash Player [Click for support]
    WacomTablet [Click for support]
Time Machine: ℹ️
    Mobile backups: OFF
    Auto backup: NO - Auto backup turned off
    Volumes being backed up:
        Macintosh HD: Disk size: 2.00 TB Disk used: 316.51 GB
    Destinations:
        My Book [Local]
        Total size: 2.00 TB
        Total number of backups: 8
        Oldest backup: 2013-11-03 12:06:31 +0000
        Last backup: 2015-02-17 10:06:36 +0000
        Size of backup disk: Adequate
            Backup size 2.00 TB > (Disk used 316.51 GB X 3)
Top Processes by CPU: ℹ️
         2%    WindowServer
         0%    AppleSpell
         0%    ps
         0%    fontd
         0%    launchd
Top Processes by Memory: ℹ️
    94 MB    Finder
    86 MB    WindowServer
    73 MB    Spotlight
    69 MB    com.apple.internetaccounts
    64 MB    NotificationCenter
Virtual Memory Information: ℹ️
    589 MB    Free RAM
    1.91 GB    Active RAM
    1.34 GB    Inactive RAM
    451 MB    Wired RAM
    1.04 GB    Page-ins
    193 KB    Page-outs
Diagnostics Information: ℹ️
    Feb 27, 2015, 12:16:17 PM    /Library/Logs/DiagnosticReports/WacomTabletDriver_2015-02-27-121617_[redacted]. crash
    Feb 27, 2015, 12:08:32 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/fontd_2015-02-27-120832_[redac ted].crash
    Feb 26, 2015, 08:19:12 AM    /Library/Logs/DiagnosticReports/WacomTabletDriver_2015-02-26-081912_[redacted]. crash
    Feb 27, 2015, 12:46:20 PM    Self test - passed

I have an ipad wi-fi cellular 32gb. Died in march after 3 month has been replaced now the replacement has died, holding home key and button on top doesnt work at all, not even if left over night and the next day and night, still nothing.

I was given a ipad after xmas 2012. Within a month it was freezing up and returned to apple to replace. It was sent straight back to me saying it was fine. The day I got it back it was faulty again only this time it was worse, it was switching itself off and turning itself back on when it liked. A back up and restore was completed AGAIN. 3 weeks later it was sent straight back to apple to be replaced, this time a higher authority from apple in brisbane said it was to be replaced immediately. Which it was. Then within 6 weeks this ipad the replacemetn ipad has started having issues by turing itself off. Now it has completely shut itself down and off. Charge was at 81%. I put it on charge as maybe the %% was wrong. A few hours later, tried turning it on by holding top button, nothing happened I have also held down top button and home key for 10 sec, nothing so I tried longer nothing happened. Rang apple support and they have suggested holding top button down for 10 sec then add home key for 10 sec both top button and home for 10 sec then they top button off followed by leaving home key for 10 sec by itself. This did not work. I have tried this again this morning and again at lunch at work and again now tonight. Still nothing at all. Even plugging it into the computer doesn't do anything at all. Has anyone else come across this at all with two ipads doing exactly the same thing. My power points are fine, I've had an electrician check them and my computer is fine aswell. I stumped as to what can be going wrong. Thanks

Is your battery dead or alive?
If the battery is dead, we must find out if it is:
1. Charger problem
2. Cable problem
3. Docking port problem
4. Wall socket problem

How do I re-install Acrobat after hard drive has been replaced?

I purchased and installed Acrobat XI in June. Shortly after this the hard drive on my laptop needed to be replaced and I now need to reinstall. Can I do this using the original code, as if installing a new product, or do I need to do something different? Please advise

Yes, simply use the original installer and serial.
Mylenium

My ipod on my iphone has been replaced by "music" but now it will not play- it started and then crashed after a few seconds- now my music is blank

Please help, I have installed Icloud on my iphone 4 and now I cannot play any music, my ipod has been replaced by a music file and it jammed after a few seconds of play- after downloading back from icloud. The music is there somewhere becuase it streams in my car but on the phone the screen is blacnk and I have no controls.
Thanks for any help
Jacqueline

Delete the music in your iTunes library, then go to iTunes store, Quick Link, 'Purchased' to redownload again.

My MacBook Pro hard drive crashed a little while ago and has been replaced. Is it possible to take tunes from iPod Classic and transfer all of them back to iTunes on computer?

My MacBook Pro hard drive crashed a little while ago and has been replaced. Is it possible to take tunes from iPod Classic and transfer all of them back to iTunes on computer? Is this just for purchased tunes or can I do it for ones that have been burned from CD's as well? Thanks for any help!

[Zevoneer's detailed instructions on getting music off an iPod|http://discussions.apple.com/message.jspa?messageID=9053179]
[Wired's How To: Get Your Music Off of Your iPod|http://howto.wired.com/wiki/Get_Your_Music_Off_of_Your_iPod]
[http://www.metaphoriclabs.com/articles/5-ways-to-copy-music-off-your-ipod-window s-mac-os-x/]
[Topic: Get music off iPhone|http://discussions.apple.com/message.jspa?messageID=11512841]
[Copying iTunes Store purchases from your iPod or iPhone to a computer|http://docs.info.apple.com/article.html?artnum=305465]

I am running safari 7.0.6 with IOS 10.9.4. after the mac has been asleep and I log on I cannot open safari as it appears to have crashed. the workaround to this is to reboot the IOS and log back in after which safari will open.

I am running safari 7.0.6 with IOS 10.9.4. after the mac has been asleep and I log on I cannot open safari as it appears to have crashed. the workaround to this is to reboot the IOS and log back in after which safari will open. Any ideas on how to resolve this?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if iTunes crashed, you would enter "iTunes" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
          DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

After logic board replacement and software update, MacBook Pro is spontaneously shutting down and preventing restart. Inconsistent ability to restart after multiple tries. What is going on?

After logic board replacement and software update, MacBook Pro is spontaneously shutting down and preventing restart. Inconsistent ability to restart after multiple tries. What is going on?

Hard drive sensor or logic board failure.
Try a SMC Reset, only thing I can help.
http://support.apple.com/kb/ht3964
Check your tones with this sounds like it's not recognizing the RAM, perhaps it's not seated well or making a bad connection or it's defective.
http://support.apple.com/kb/ht1547
Take it back. three times a charm

Some Blank Icon's on server after logic board replaced.

I have two identical mirror Drive G4s running 9.2.2 . They access files on a Windows 2003 server. In each folder is a PhotoShop Tiff file, a Quark File and an Illustrator ESP file.
The G4's don't have Illustrator or Quark on them locally. When the folder is opened on the server the file Icons showed up correctly. The main G4 had a bad Logic board that was replaced, ever since that the PhotoShop files on the server appear as type of or kind "document" and have BLANK ICONs. The files appear normally on the backup machine. I did the desktop re-build and that didn't make any diff. Trashed the system and finder prefs.
This all worked before I replaced the logic board. Any Ideas or suggestions on how to fix this. Thanks in advance.
Rick

Hi, Rick -
Try copying the files to the hard drive on the machine not displaying the correct icons. Then restart it. If that brings the icons back, you should then be able to throw the copied files away if you don't want to retain them there.

Logic Board has failed 3 times...2011 MB Pro 15 Inch

So I have recently had a ton of issues with my MacBook and it is really starting to get annoying. I had my logic board replaced in March of this year. The repair cost me around $350 as the warranty was up. The logic board failed again at the end of August. I brought it back in to the apple store and they replaced the logic board again, but for free this time. I was extremely impressed with their customer service, they even replaced my display which had a small crack. Everything worked good as new until last night. Once again the same issues as before, so obviously they logic board has failed for a third time, which is a little ridiculous in my opinion. I will be taking it in to the apple store after work today to see what's going on.
Three logic boards in the span of half a year can't be normal...Is this a sign of some other issue? Is it time to ditch this POS and get a PC? Could it be something I'm doing on my end? I rely heavily on my laptop for work and need something that consistently works. Apple's customer service has been top notch through all of this, however the actual product has not been. I would love to hear other's opinions/experiences with similar issues.
Thanks!

Perhaps - and I mean PERHAPS - you'll be offered a replacement unit this time around: it all depends on how the manager is feeling that day. A number of 2011 models have had three logic board replacements and USUALLY the fourth time around, folks are offered a new replacement unit.
Don't count on it but if it comes down to pleading with a manager, DO IT!
Good luck,
Clinton
MacBook Pro (15-inch Late 2011), OS X 10.??, 16GB Crucial RAM, Crucial M500 960GB SSD, 27” Apple Thunderbolt Display

My library of 800 songs has been replaced by 48 older items which I believe are off an older device (old nano belonging to another family member). How do I get my songs back?

My library of 800 songs has been replaced by 48 older items which I believe are off an older device (old nano belonging to another family member). How do I get my songs back?

See Empty/corrupt iTunes library after upgrade/crash.
tt2

I have a Mac G4 double mirrored model and everytime I shut it off it will not go on when I hit the power off button. However, if I unplug and plug in the power cord it boots fine and everything is OK. The PMU and logic board have been reset. Any ideas?

I have a Power Mac G4 double mirrored model and everytime I shut it off it will not go on when I hit the power on/off button again. However, if I unplug and plug in the power cord it boots fine and everything is OK. The PMU and logic board have been reset. Sometimes my Mac goes on just by pressing the power on button but most times I have to pull the power cord and put it back in. Any ideas or help out there for this? Could it be a failing power supply? Apple Care says that this model is obsolete so there is no help from there. John
<E-mail Edited by Host>

Hi John,
That's often a sign of a bsad Capacitor in the Power Supply, but...
Might be time to replace the PRAM Battery, 4 years is close to their lifespan, far less if ever without AC power, & can cause strange startup problems...
http://eshop.macsales.com/item/Newer%20Technology/BAA36VPRAM/

How to re-trigger BA00 after sales order has been rescheduled

Dear Gurus,
Could you please kindly advise how I could re-trigger BA00 after sales order has been rescheduled?
The scenario is following:
When the sales order was completed, the order confirmation output has been sent to the customer. But later, when the ATP confirmed quantity was changed or order was rescheduled, the committed delivery date has been changed. It caused confusion, because in the order confirmation letter we sent to customer, there is a different date.
I'd like to also trigger BA00 to resend the order confirmation, but I checked the output routine, it only checks if the order is completed or not. Shall I　ask ABAPer to add additional logic in the routine or there is other easier way to re-trigger BA00?
Many thanks in advance!

Have you allowed multiple issue for BA00 output type? In that case, you can manually trigger it from VA02. If you are trying to have it sent automatically, then add the logic into the routine.

Crashing after logic board has been replaced

Similar Messages

Maybe you are looking for