Crashing at installation point

I just purchased Adobe Elements 12 and I am have trouble installing the program onto my Mac.
I can get as far as the 'install' button and Adobe Application Manager says 'sign in required' I click 'continue' and it has been frozen at this point all day.
Is there an alternative way to install Photoshop or does anyone know a solution?

It is most definitely a problem with purchasing the Evo Lancer. I had purchased this car, upgraded its performance, but the game crashed when I attempt to purchase vinyls for it. The current fix for it is to delete NFS program and reinstall it. Don't repurchase this car again in the game, until the game developer updates this issue in his/her future upgrades.
If my response helps you correct any issue that you're having, award me a KUDO by pressing the Star below. Then press Accept As Solution.

Similar Messages

AIR application crashes at certain point in windows vista

Hi Dudes,
I am facing a problem in Window vista. It always crash when we open the window component using Adobe AIR. I am creating the Dynamic window and adding the child component as window.rawChildren.addChild(object) like this.. we made the setup , it is running perfect in all OS except Windows vista 32/64 bit.
When we work with our AIR application in conjunction with our own h/w product(Tablet Driver).[without connection of Tablet slate with PC it works fine but with it not].
S/w Details:- AIR Installer above 2 and SDK above 2.
OS- Win-Vista 32/64 bit.
AIR application crashes at certain point and shows the error like:-
Problem signature:
Problem Event Name:                        APPCRASH
Application Name:                             GTMP.exe
Application Version:                           0.0.0.0
Application Timestamp:                     4bde2f02
Fault Module Name:                          Adobe AIR.dll
Fault Module Version:                        3.1.0.4880
Fault Module Timestamp:                  4eb760e8
Exception Code:                                  c0000005
Exception Offset:                                003ca9be
OS Version:                                          6.1.7601.2.1.0.768.3
Locale ID:                                             2057
Additional Information 1:                  0a9e
Additional Information 2:                  0a9e372d3b4ad19135b953a78882e789
Additional Information 3:                  0a9e
Additional Information 4:                  0a9e372d3b4ad19135b953a78882e789
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt
I found one more error in debugging mode..the Alert message is
Microsoft Visual C++ Runtime Library
R6025 -
pure virtual function Call.
As per my view it is about some .dll and .CPL file makes some issues with AIR Frameworks is it? !!!!..
Please give some ideas to resolve it.
by
Beerahamedkhan

Could you try this against the released 3.2 version of AIR and our 3.3 beta to see if it still occurs? If so, please open a new bug report on this over at bugbase.adobe.com? Include any sample code or application to help us easily reproduce the problem. If you'd like to keep your code private, please feel free to send it to me directly at [email protected] In addition, if you can give us a .dmp of this crash it could be very helpful.
Please post back with the URL so that others affected can add their comments and votes.

Windows 10 update crashes mid installation

The installation crashes at certain point, every single time and i want the newest update because it fixes a huge bug for me so can anyone help me? i really need this update, BTW I downloaded the iso file not through the auto update system.

Make sure you have installed all Windows Updates.
Jerry

Best Practice for Updating Administrative Installation Point for Reader 9.4.1 Security Update?

I deployed adobe reader 9.4 using an administrative installation point with group policy when it was released. This deployment included a transform file. It's now time to update reader with the 9.4.1 security msp.
My question is, can I simply patch the existing AIP in place with the 9.4.1 security update and redeploy it, or do I need to create a brand new AIP and GPO?
Any help in answering this would be appreciated.
Thanks in advance.

I wouldn't update your AIP in place. I end up keeping multiple AIPs on hand. Each time a security update comes out I make a copy and apply the updates to that. One reason is this: when creating the AIPs, you need to apply the MSPs in the correct order; you cannot simply apply a new MSP to the previous AIP.
Adobe's support patch order is documented here: http://kb2.adobe.com/cps/498/cpsid_49880.html.
That link covers Adode Acrobat and Reader, versions 7.x through 9.x. A quarterly update MSP can only be applied to the previous quarterly. Should Adobe Reader 9.4.2 come out tomorrow as a quarterly update, you will not be able to apply it to the 9.4.1 AIP; you must apply it to the previous quarterly AIP - 9.4.0. At a minimum I keep the previous 2 or 3 quarterly AIPs around, as well as the MSPs to update them. The only time I delete my old AIPs is when I am 1000% certain they are not longer needed.
Also, when Adobe's developers author the MSPs they don't include the correct metadata entries for in place upgrades of AIPs - any AIP based on the original 9.4.0 MSI will not in-place upgrade any installtion that is based on the 9.4.0 MSI and AIP - you must uninstall Adobe Reader, then re-install. This deficiency affects all versions of Adobe Reader 7.x through 9.x. Oddly, Adobe Acrobat AIPs will correctly in-place upgrade.
Ultimately, the in-place upgrade issue and the patch order requirements are why I say to make a copy, then update and deploy the copy.
As for creating the AIPs:
This is what my directory structure looks like for my Reader AIPs:
F:\Applications\Adobe\Reader\9.3.0
F:\Applications\Adobe\Reader\9.3.1
F:\Applications\Adobe\Reader\9.3.2
F:\Applications\Adobe\Reader\9.3.3
F:\Applications\Adobe\Reader\9.3.4
F:\Applications\Adobe\Reader\9.4.0
F:\Applications\Adobe\Reader\9.4.1
The 9.4.0 -> 9.4.1 MSP is F:\Applications\Adobe\Reader\AdbeRdrUpd941_all_incr.msp
When I created my 9.4.1 AIP, I entered these at a cmd.exe prompt - if you don't have robocopy on your machine you can get it from the Server 2003 Resouce Kit:
F:
cd \Applications\Adobe\Reader\
robocopy /s /e 9.4.0 9.4.1
cd 9.4.1
rename AdbeRdr940_en_US.msi AdbeRdr941_en_US.msi
msiexec /a AdbeRdr941_en_US.msi /update F:\Applications\Adobe\Reader\AdbeRdrUpd941_all_incr.msp /qb

Acrobat x pro crash after installation and running it, exit code 16,

Acrobat x pro crash after installation exit code 16
I installed Adobe acrobat X pro 10.0 trial and every time after installation and running the software it give me the following error message
Please uninstall and re install the product, if the problem still occurs contact Adobe etc….
Error code shutdown 16
I’m using window 7 ultimate 32-bit service Pack 1.
I uninstalled also the adobe reader but with no hope,
If anyone can support me with this issue I will be grateful.

Please check the solution provided under the below articles and check if that helps. Few users have resolved their issues by following it.
http://forums.adobe.com/message/4648705
Also, try running the below Microsoft fixit and check if that works.
http://go.microsoft.com/?linkid=9708107
If still same issue, follow "http://helpx.adobe.com/creative-suite/kb/error-1603-install-cs5-products.html"
[Moved the discussion to Acrobat Installation & Update Issues Forum]

Installation Point in BOM

Hi,
We have REM scenario for TV industry & BOM changes according to the ECR by CS02.Now we have Multilevel BOM of 800 components with sort string wise. ECR has been created by CC31 & after approval of it , BOMs have been changed.
But we have to change the BOM by identifying each assy code & changed it by CS02. So for 800 TV models we have to change each BOM (almost 2000 BOMs include Sales & production BOM) which is quite tedoius job.
Since we have assy PCB for TV.This assy PCB have components with installation point ref. to PCB location.If i have to change the BOM as per ECO ,I have search for each location & change the item with qty wise which is also tedious job considering 2000 BOMs.
I have already use CS20 for mass change but couldn't find installation point field.
Now how to mapp this situation?Is there any user exit?suggest the any solution for the same.The solution will be appreciated.
rg
Tushar

PP Gurus,
Pl.reply
rg
Tushar

Insert installation points (subitems) in existing bom

Hi,
I am trying to insert installation points in an existing bom. Searching the forum i learned that this should be possible with function CSAP_MAT_BOM_MAINTAIN using table t_stpu. I did this and get an sy-subrc = 0 but when i take a look at the bom i see that no installation points are inserted.
this is a peace of the codecode :
loop at itab.
move wa_stpo-item_node to i_stpu_upd-pointer.
i_stpu_upd-MANDT = sy-mandt.
i_stpu_upd-STLTY = 'M'.
i_stpu_upd-stlnr = wa_stpo-bom_no.
i_stpu_upd-STLKN = wa_stpo-item_node.
i_stpu_upd-STPOZ = wa_stpo-item_count.
i_stpu_upd-UPMNG = '1'.
i_stpu_upd-EBORT = itab.
i_stpu_upd-SELKZ = 'X'.
move sy-tabix to v_uposz.
    CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
        EXPORTING
          input = v_uposz
        IMPORTING
          output = v_uposz.
i_stpu_upd-UPOSZ = v_uposz.
append i_stpu_upd.
endloop.
endif.
endif.
clear i_stpo_upd.
move-corresponding wa_stpo to i_stpo_upd.
append i_stpo_upd.
clear ch_stko.
PERFORM begin_of_api USING 'CSAP_MAT_BOM_MAINTAIN'.
CALL FUNCTION 'CSAP_MAT_BOM_MAINTAIN'
            EXPORTING
              material           = '21822'
              plant              = ''
              bom_usage          = '1'
              "VALID_FROM         = v_date
              i_stko             = ch_stko
              CHANGE_NO          = wa_stpo-CHANGE_NO
              fl_bom_create = ' '
             fl_new_item = ' '
IMPORTING
   fl_warning = flg_warning
             o_stko     = tstk2
            TABLES
              T_STPO             = i_stpo_upd
              t_stpu             = i_stpu_upd
            EXCEPTIONS
              error              = 1
              OTHERS             = 2.
      if flg_warning = 'X'.
            PERFORM api_log_to_return USING ermsg_update.
            if not ermsg_update is initial.
              move ermsg_update to errorlog.
              append errorlog.
            endif.
          else.
            move 'Update successful' to errorlog.
            append errorlog.
            CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
WAIT = 'X'
IMPORTING
RETURN = C_RETURN .
          endif.
Can't find my fault, hope you guys can.
with regards
Erik

Hi Kumar,
Thanks for the quick response. The item I am talking about is a simple cable which is used in meters(only one unit). But for variable size item, we need more than 1 dimension right? The scenario is like this,
Material : Cable12345
Application:
Used in a single elctrical panel for different application as follows
a) for coolant motor
b) for servo motor
Here they are identifying these two applications with different tagging like CB6 & CB17
In the BOM they are giving Cable12345 as an item for the electrical panel and they are adding the length of cable required for both the application (4M + 6M) and giving as 10 M against the code. I want to split the same thing using installation point as follows
Header
Electrical panel
Item
Cable12345           10M(Total of SI's)
Sub-item details
Installation points   SI-QTY      SI-Text
Coolant motor         4M            CB6(tagging reference)
Servo motor           6M            CB17(tagging reference)
If I define the BOM like this structure, I assume the consumption will be for 10M (item qty) and we can print the SI content in the production order.
Kindly confirm.
Sridharan M

BOM comparison based on Installation point of Subitems

Hi All,
Can I do a BOM comparison based on the installation position of the sub items?
There is an option to select the installation point in "sort by install point" in the "further selection" screen. But it is not getting populated in when I execute CS14. Please advice. Thanks.

Hi Mr.Pradeep Rao,
Could you please give me your mail id.
I will send you the screen shots, to compare the BOM's based on the sort by installation point.
The system is not showing directly in CS14.
Procedure: is once after doing the necessary settings under Further settings page,give the BOM details and VALID from date & click on Diff.Comparison.
In the next page,I hope you must be knowing the BOM item for which sub item exists. and the item quantity must be same in both the BOM's.
You will be able to see the symbol for that BOM item showing Similar component (Red Color Button).
Just Double click on that symbol(Comparison result symbol) and the system pops upa new screen,there you brach out the node -Sub Items-Comparison By installation Point.Now you can see the items based on installation point.
I hope in this way you will be able to see the items compared on installation point.
If this solves your problem ,Please reward maximum points and Close the thread as answered.
Thanks & Regards
Mangal

Not a valid Network Installation Point

Post Author: BGardner
CA Forum: General
This one is obscure but I hope that someone will recognize it. It doesn't appear on any searches.
Crystal 8.5 was installed onto a client's server (used for custom reports in an accounting application). I was able to successfully run a Workstation installation to 2 or 3 PC's using P:\ as the Network Installation Point.
But now the Workstation install fails and returns the message "The directory P:\ is not a valid Network Installation Point - it does not contain the Crystal Reports network files."
Notes:
The cause of the problem is that the server was replaced by a newer one
The new server has the same name and sharenames & drive mappings are identical
All files were copied from the old server to the new one
Everything else runs correctly, including CR on workstations previously installed
I reinstalled CR but with the same results
Server O/S is Windows 2003 on both servers.
Clearly there is something missing (or something that shouldn't be there!). Or could it somehow be a rights issue?
I'm stymied so all suggestions are welcome! Thank you.

You don't specify the version number of 2.6. Is that Solaris 2.6 HW 5/98? Any earlier version of Solaris 2.6 will most likely not work.

What did I do wrong? I used to have iTunes installed on this computer and lost it when it crashed. No I can't get past a certain point in the installation point. I keep getting an error message stating that I need to verify that I have access to this file

Help!! What's going wrong here. I used to have iTunes installed on this computer but lost it when it crashed. I've tried re-installing it numerous times but I keep getting the same error message. "Error writing to file: C:\ProgramFiles\iTunes.Resources\es.lproj\iPadLicense.rtf. Verify that you have access to that directory." I know I have access to that directory because on a different computer I can sync my iPad and iPhone. What am I doing wrong? What do I need to go in and authorize or turn on? Any help greatly appreciated. Thank you.

That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

Crashing - New Installation InDesign CS 6 fully patched

I've just installed Adobe CS 6 Web and Design Premium on a Macbook Pro running Mac OS X 10.7.5.
This computer uses Extensis Universal Type Server client 3.3.0.
Immediately following the installation and patching, InDesign crashes following launch when any tool is choosen.
It's consistent and reproducible.
I've removed InDesign preferences, ensured that there are no problems with the Mac (Disk Repair, Disk Permissions, etc.),
applied the icon issue patch.
At this point I'm thinking about uninstalling altogether and reinstalling the CS6 suite.
Any help would be appreciated. This is one install out of about 20 with similar configurations.
There rest of the installations went smoothly.
Side note - Adobe , please don't tell me hold time will be 5-8 minutes when it's over 30.

To isolate if this is Universal type Server issue, you'd have to drag the autoactivation plugin out of the Plug-ins folder. On mac this would be on the following location: /Applications/Adobe InDesign CS6/Plug-ins/Text/. Quit InDesign. Navigate to the location mentioned earlier and drag the auto activation plug-in from there to desktop. Re-launch InDesign and test for crash. You can also use the Extensions Manager to Find the auto activation plugin by choosing InDesign from the left panel of Extensions Manager and then look for the autoactivation plugin on the right panel. Upon finding the autoactivation plugin select it and click Remove.

Ilife 08 crashes during installation

during installation, when the installer gets to iphoto '8 segment it just crashes. other softwares got updated (idvd and imovie '08). anyone with similar experience/solutions?

isn:
Welcome to the Apple Discussions. It could be a damage installer disk. You can try the following:
1 - boot into Safe Mode and try installing there. If there is anything installed in your account that was the culprit it is not loaded in Safe Mode and the install should work. If the install fails at that point again I'd suspect the disk.
2 - a second confirmation of a bad disk would be to use Pacifist to locate, extract and install just iPhoto from the iLife disk. If it can't extract iPhoto then I'd bet it's the disk.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Crash during installations

Hi,
I am having a problem when installing some software. First time I had this problem was with the creative suite 6 by Adobe, Photoshop in particular. What happens is this: I try to install the whole bundle, at some point out of nowhere the whole system stops responding. I waited a couple of minutes in case it just froze or something, then i restart. When I tried again and again and always the same story, I noticed it always froze at the same point. In the end I installed the whole bundle exept Photoshop. That worked out fine, then I copied the files for Photoshop manually and somehow it works.
The same thing happend when I installed Mathematica 9, always at the same stage of the installation, no matter how often I try. This time copying didn't work. Neither Wolfram nor Adobe have anything in their support forum, so I guess it doesn't really have anything to do with the software itself.
I looked for similar questions in this forum, but I couldn't find anything helpful. Please help if you know how to solve this.
Manuel

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time after you had the problem. Select the messages logged before the boot, while the system was unresponsive or was failing to shut down. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). Please include the BOOT_TIME message at the end of the log extract.
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

CC Desktop app crashes mid-installation

Hey,
I work in a post-production facility, and every time we need to install an update for CC, at least half of our machines experience problems with the CC Desktop App - most of the issues have to do with softwares not showing up as installed (even though they are), and hitting "install" again on those machines, removes user preferences. The bigger issue is when the Desktop App wont launch at all, or it launches but then crashes after a few seconds, with restart being the only way to bring it back.
Needless to say these issues are problematic, but since the internet is flooded with complains I assume you're already aware of them.
The bigger problem is this time around, one of the machines that had the Desktop App crash, didn't launch the app back after restart.
I tried following the recommended instructions, removed the app with the CC Cleaner tool, changed the OOBE folder name to OOBE.old, restarted the machine again and downloaded the newest version of CC installer from the Adobe website.
When trying to reinstall, the installer reaches the "Installing" phase and crashes (more like "disappears"), without giving any form of error massage.
I should note that the machine is a mac pro (running OS X 10.9), and that before running the reinstall I checked that no processes related to adobe were running and manually made sure the CC desktop app was completely removed. I also tried installing from different users but am getting the same results.
Have you seen this issue before? Is there something else I didn't try?
Or alternatively, can I somehow download offline installers for the latest update? Having access to offline installers would make our update process way easier, both on us and on our bandwidth (having to log in to different machines and download the same updates over and over again isn't the greatest way, especially while the desktop app is so unpredictable and still has major issues).
Thanks!
Michael

For people who might be having the same issue - I ended up half-solving this by copying over and replacing the entire CC Desktop App folder (under Applications > Utilities) from another machine that was working fine.
Now the Desktop Application is actually able to launch, but for some reason After Effects is stuck at 76% updating, giving an error message that AE needs to be closed before continuing. Thing is that AE is definitely not running - I made sure of that using both activity monitor and via the command line, and also tried restarting the machine, but am still getting the same error.
I than tried quitting the CC Desktop app and launching AE (which was obviously not updated), than chose "updates" from inside AE. It launched the old adobe application manager (the machine also has CS5 installed), and installed the updates from there, where everything seem to install fine with no problems.

My New Retina MacBook Pro crashes during installation and cannot turn back on?

My New Retina Display MacBook Pro suddenly just crash all of a sudden during installation, it happened when in a white background ther is a Lion image at the center and a progress bar at the bottom. The MacBook cannot be turned back on after this crash!!!! Does anyone has the same problem?
P.S. I had connected to a power cable during installation and didn't touch it at all during installation.

Similar problem here. Using the new Macbook Pro with Retina Display, happily for a week. Tonight it suddenly died, turned itself off, that is. I couldn't turn it back on now.... Very frustrating. Any solution except for bringing it back to the Apple store?

Crashing at installation point

Similar Messages

Maybe you are looking for