Crashing document Flash 8 Mac OS10.5.6

I've been working on an animation for a few weeks. I've
amended it today, part way through it crashed. Thewn every time I
open it now it crashes within a few seconds. I've tried saving as a
new document, copying all frames into a new document, re-starting
the machine and running utility disk and still crashes. Other Flash
document work fine.
Any suggestions please?
Thanks
Chris

Wasn't sure since this isn't the Reader forum.
No. Can't do that then.

Similar Messages

Using MAC OS10, After running fine, CS3 now crashes on startup

Using MAC OS10, After running fine, CS3 now crashes on startup

Which specific OS version?
And what does the crash report say?

Mac Os 10.6.8 Crash and video freeze, Mac Pro

Hi,
I just installed Mac OS 10.6 on my old Mac Pro, early 2009 (8 gib of Ram installed). I still have my old Mac OS10.5.8 on another internal boothable disk.
It went well the first day or so but now I'm experiencing some major video problems: picture of the desktop keeps freezing, videos are crashing in Firefox 30 with Flash 14 plugin, etc. I have 2 internal identical video cards and 2 separate monitors (NVIDIA-GT120). Here is a picture of what's happening:
I have installed upgrade for FireFox and Flash Player plugin 14.
I've tried to deactivate Flash option for "Accelerated": nothing is changing, the problem is still there.
Everytime a have a window that I move from one monitor to another smear and freeze all over on both monitors.
I have QuickTime 7 and QuickTime for mac OS 10.6. I want to keep my older version because I have Quicktime Pro.
Where should I start, I'm no expert, thank you in advance to explain it to me in a simple manner if you answer to that post.
Please help,
Thank's!

Thank you for answering so promptly,
I already made a backup with TimeMachine of my new and original files of Mac OS 10.6 system.
May I point out that I've just installed Mac Os 10.6 as an upgrade of Mac OS, from 10.5. I have now Mac OS 10.5 on one boothing disk and Mac Os 10.6 on another boothing disk. I can wether rebooth on one or the other. I upgraded to my new Os from a clone copy of 10.5 to 10.6 on a different disk: I'm aware that my new Mac OS may be not be as clean as it should be.
I also did all the operations you where mentionning such as disconnecting all non essential peripherals (even my main monitor) then power it up again. I also reboothed in "Safe Mode" and started again in normal mode afterwards. I've even zapped the "P RAM". I even did a "Repair Permissions with "Dislk Utilities". Nothing of that nature have resolved the various issues that I metionned in my previous Post.
"Isolating an issue by using another user account"
Thank you for the link, I shall read it carefully and thoroughly. Yes, I have tried to logged-in as a new user before your Post. I think this solution helped afterwards.
I don't use these options often, I'm the only user and I'm not that familiar with all these options. I've tried to share some folders or files and also tried to setup an automatic password but I was not that very succesfull. As this article is mentionning: the main idea is to "check if the Mac OS is behaving as expected" in a new user account.
The answer to that is a positive "yes" and I did regain a better control of my Mac OS new system afterwards.
I did not understand at first your expression "If Back-to-My Mac is selected in System Preferences, the Guest account will not work". Reading a little about it, I think it has to do with an "iCloud feature to set up a network of Mac computers that you cant then access remotely". I don't have an iCloud connection/account installed/set-up. I only expremimented with that option once or twice many years ago with my iPod so, I,m not familiar with that option.
"Deleting/disabling the third party applications after a restart by using the application un-installer"
Since I'm not a newbie on the Mac, I know how "Third Party's Applications/utilities" may really mess up an OS and make it behave in unusual ways sometime... I did find some of them installed in the menu that where messing up my new Mac OS. I deleted/deactivated them completly and reinstalled them one by one, carefully reboothing my Mac between each new installation. Some upgrades where installed for some.
Question about User Account vs. System's Files
Can I delete certain presets and/or preference files only stored in my "User Account" but should I never do this with files stored in the "System Folder" or the "Main Library"? Sorry, I'm an "Older Guy" and I'm used to older versions of Macs... Thank you for suggesting any good updated documentation on that matter.
Which Quicktime to use with mac OS 10.6: 7.6.6 or 7.7?
This is not clear at all on Apple's Web Site. I've downloaded and installed both. Maybe this is my problem. I wish Apple would more clear about it for those like me who want to use Quicktime Pro: 7.6.6 for Mac Os 10.6 and 7.7 for Mac Os 10.5???
As for now...
My system is behaving better and it' also much more stable now, thank you! All the suggested steps have been made to to resolve certain issues.
But not all...
I've still have the problem with QuickTime 7 and Flash 14 plugin when I browse and watch certain videos on the Web after a certain time. It's still very annoying when it's starts: I get an all smeared up display of my desktop afterwards (as shown in the above example in my first post). Restarting my Mac resolve's it for a a while only... It seem's that there's a problem with the Video Ram stored when Quicktime/Flash 14 are used? They freeze the System's process who is trying to erase the old data and prevent's it to replace/refresh it with new data on screen...
Thank you for your time and looking forward to read you,
Robert Marchand

How to report a crash with Flash Player

In this thread, I'll be describing the different processes for reporting crashes in Flash Player. We're committed to finding and fixing these bugs and we appreciate any help you can give us!
In general, when reporting a crash, please create a new bug over at bugbase.adobe.com and a new thread so that your issues won't be lost in threads that can sometimes span many pages. When creating the bug, please include the following information:
1. A brief explanation of what you were doing when the crash occurred. Screenshots and or video of the steps required are always welcome! Cell phone captures work great. Many times we can pick up on small subtleties with a simple picture.
2. An exact URL where the crash occurred. Even though a crash might appear to happen in many places (like all videos on youtube for example), it still helps us to have an exact URL so that there are no ambiguities in our testing.
3. A crash log! See the posts below for details on creating crash logs for your particular browser.
4. Your current version of Flash Player
5. In some cases, computer hardware and drivers can contribute to a crash. Getting your system details is always helpful. Here are some simple steps to gather system details for Windows, Mac, and Linux.
Thanks!
Chris

Internet Explorer for Vista and Windows 7
1. Download the files "Enable Crash Logging.reg" and "Disable Crash Logging.reg" attached to the bottom of this post.
2. Double click the "Enable Crash Logging.reg" file. Click Yes to the Registry Editor dialog.
3. Restart your system
4. Open Internet Explorer and try to navigate to a page with working Flash content (for example, go to our About Flash page)
5. Reproduce the crash
6. Once Internet Explorer has crashed, open an Explorer window and type the following into the navigation bar: %localappdata%
7. Navigate into the CrashDump folder
8. Select a recent iexplorer.exe.<somenumber>.dmp file and copy it to your desktop
9. Now that we have a crash log, we'll disable crash logging by double clicking the "Disable Crash Logging.reg" file downloaded in step 1 and selecting OK. Note this step is optional. You are free to leave crash logging enabled. With it enabled, Windows will save your last 10 crashes for future reference.
10. Restart your system
11. Include the crash log you saved to your desktop in your bug report
Internet Explorer for Windows XP
1. Display hidden files and folders in Explorer using this Microsoft document
2. Open Internet Explorer and try to navigate to a page with working Flash content (for example, go to our About Flash page)
3. Reproduce the crash
4. Once Internet Explorer has crashed, open an Explorer window and navigate to the following folder:
C:\Documents and Settings\All Users\Application Data\Microsoft\Dr Watson
5. Locate the file named "user.dmp" and copy it to your desktop.
6. Include the crash log you saved to your desktop in your bug report

Flash cs4 mac - Error opening URL '/:Users:someting.swf' - Not a "loading external content" problem

Hello.
I am having a weird problem when trying to test a movie or publish preview -> flash on mac with Leopard os.
The result is a blank movie with the usuall "movie not loaded" if u right click on it and the output returns the "Error opening URL 'the path of the swf here'.
This has nothing to do with loading external files or something like that. It happens even in blank movies and it gives the same error if I try to open a swf from flash ide.
I can publish the project or export the movie with no problem at all.
I can preview the movie in html. I can run all the swf files in my hard disk, network, usb stick, dvd etc., but when I try to open any of these files from flash ide I got that stupid error.
Its not something that stops me from working in flash ide but its slow to export movie any time I want to test it.
Things that I've tried so far but nothing worked:
Update the flash cs4 to the latest version
Update the flash players
Restored the release flash player as default player (I am using as default the debug player)
Cleared the preferences
Move the flash cs4 folder to another location in hd
Saved the fla document first before testing the movie (in different places with or without spaces in document name or folder)
Give read & write permissions for everyone for flash.app, players and for fla files when saved first before test movie
Unistall and install the application 3-4 times.
Test every as version just in case.
Also I've checked the folders when testing movie and I can see that it creates an swf file, which I can run it outside flash ide (the one that the flash ide player cannot load) with no problem.
The mac os has the default set up as it came. Nothing chnaged in permissions or security settings.
Thanx in advance.

In this particular example I am using this code to start the
xml file load:
// now load the XML file that contains the content strings
var sXMLFile:String = "xml/home.xml";
var xmlContent:XML = new XML();
xmlContent.ignoreWhite = true;
xmlContent.onLoad = onXMLLoadComplete;
xmlContent.load( sXMLFile );
But I don’t think the code is the problem here . This
happens on every file I load when I am using a relative path to the
content, regardless of how I load the content (XML object,
loadMovie, MovieClipLoader, etc…) and the same code executes
perfectly on every other machine in the office(Mac and PC).
I’m more concerned with the semi-colons and .swf filename
that Flash is putting into my relative path on the error message.
Is that normal?

How to update adobe flash player with os10.6.8

how to update adobe flash player with os10.6.8

You can check here what version of Flash player you actually have installed: http://kb2.adobe.com/cps/155/tn_15507.html
You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS. You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
http://kb2.adobe.com/cps/909/cpsid_90906.html
and also that you follow the instructions closely, such as closing ALL applications (including Safari) first before installing. You must also carry out a permission repair after installing anything from Adobe.
After installing, reboot your Mac and relaunch Safari, then in Safari Preferences/Security enable ‘Allow Plugins’. If you are running 10.6.8 or later:
When you have installed the latest version of Flash, relaunch Safari and test.
If you're getting a "blocked plug-in" error, then in System Preferences… ▹ Flash Player ▹ Advanced
click Check Now. Quit and relaunch your browser, but check this also:
http://support.apple.com/kb/HT5655?viewlocale=en_US&locale=en_US which also covers ‘blocked plug-in’.

Mac OS10.9 Quark 9.5.4 - font leading issues

Mac OS10.9 Quark 9.5.4
Recently upgraded OS and Quark and my documents that use the font Avenir are not displaying correctly. Fonts leading has expanded so anywhere Avenir is used, the leading changes the layout and most text boxes are overset.
- leading is set to Auto
- do not use a font manager, I use FontBook- checked usage and font is not missing
- deleted Avenir, emptied font cache, restarted and issue still exists- made a new user, packaged a file, opened in new user and issue still exists
- not just one file, issue exists in every file I made that uses Avenir in my archive- had my colleague open the same archived files on their computers and files were correct
- had colleague send me Avenir font, deleted out of my library, reloaded font and issue still exists
- deleted font out of my library and just used Avenir system font, issue still exists- deleted Quark and re-uploaded, issue still exists
- re-uploaded OS, issue still exists- did a thumbnail transfer of items from old doc to a new doc, issue still exists
- have spent over 6 hours on the phone with Quark support and have numerous messages back and forth in a job ticket, no resolution
I would not normally use Quark, but a client reuqests it. I suspect I might have a corrupted system font but I am unsure. 3 weeks behind schedule on my project and am desperate for help. Any ideas?

I just found out my E3000 was no longer compatible with making a Guest Access password. Spent a ton of time online chatting with a Linksys/Cisco rep who told me it was not longer compatible with the newer operating systems...BUT THIS IS A LIE! My E3000 works great with Yosemite. A couple of things you need to know. 1. You can no longer use the Cisco Connect CD to set up a Guest PW. It has been replaced by a handy App, that you can download from the App store: http://www.linksys.com/us/support-article?articleNum=156285 2. You can change the settings on your Wifi router directly from this app. No need to go into the 192.168.1.1 site and configure it but if you want to, you still can do this. On the website, there is no way to configure the GUEST settings unfortunately.... 3. You can configure a Guess Access code and set the number of computers allowed to use it at one time on the App. After you set the code, it will bring you off line then online again. Make sure you log in to your WIFI network under both Guest and your WIFI network to see if works. For some reason, it took some time for my iPhone to bring me to the Guest sign-in page, but I eventually switched the ON/Off button on the Guest Password setup and it worked. All guests should be redirected to a CISCO SIGN-IN page where they can log in with the guest Password. 4. I can't believe the customer reps didn't tell me immediately about this app! I gave it 1 star as it wasn't working very well until I reset everything and started over. Maybe that was just my incompetence.... Good luck! My 5 yr old dual band router is still working very well! No need to get a new one to be compatible with Yosemite!

Flash CS4 (Mac) quits when closing file

Not sure if this is a bug or an oversight or a "feature", but
no apple application quits when you close a document.
On Macs, when a document in a Flash CS3 (or any other mac
app) is being worked on and then closed, the application stays
active (open) in the dock so you can quickly open any other
document. But Flash CS4 (trial) quits when I close my document.
Whats up with that? This is more of a PC functionality that I
really don't like.
Thx
Fish

Hi Fish,
I also had this problem but soon realized that files now open
in tabs. To close a file without quitting Flash, close the tab --
not the window.
Hope this helps,
Sean

Mx710 will not open the scanner window Mac OS10.8.5

I have tried restarting both machines, I am able to print but when I go to scan a document I get a blank scanner window .
See attached screen shot below. It worked a week ago.....
Mac OS10.8.5 not using wifi using USB.
Any ideas??
Thank you!
Solved!
Go to Solution.

Hello rx7race.
To scan with the unit, please use our MP Navigator program.
First, we recommend that you install the latest drivers and MP Navigator from our website. Please visit the following link:
http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mx_series/pixma_mx712#Dr...
Once there, choose 'OSX v10.8' in the operating system menu. Then download the MX710 Series Mini Master Setup and MP Navigator EX items from the listing.
If additional assistance is needed, feel free to call us at 1-800-OKCANON.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

HT1349 i need to put the documents from the mac onto the mac book air

i need to put the documents from the mac onto the mac book air. How to I transfer my mac documents and music information to my macBook air?

You have many options.
Network the two Macs
Use a Thunderbolt or FireWire cable and use FireWire Target Disk Mode
Use Setup Assistant when you first set up a new Mac, or Migration Assistant at any time thereafter
Use an inexpensive USB flash drive
Email documents and files to yourself
Use Dropbox or similar service
Those are just a few. If you explain further or reply with the model of your "older" Mac and which OS version it is using, more specific information can be provided.
You may find Apple Support Communities contributor Pondini's OS X tip useful: Setting-up a new Mac from an old one, its Backups, or a PC

Flash and Mac Power PCs..

Hi Everyone,
I am having a problem with my dual GHz G5 power PC mac and Flash. Recently, all of a sudden sites that use flash have been causing both firefox (3.6.21) and safari to crash so I decided to uninstall flash and download the most up to date version (I have up until recently been offline for a while). Obviously then I discovered that flash for power PCs is not made any more so I had to download the most recent PPC version (10.1 I believe). However, now that I have installed this, the same problem keeps happening.
Does this mean that I am unable to get the right version of flash and that my G5, which is only 6 years old, will now be largely unable to properly browse the net? I know that Macs now use intel processors but surely I have some option?!
Thanks in advance guys

Hi,
Thanks for the advice, but I have already done this but it doesn't seem to be working properly. When I click on the flash install icon a box appears with the adobe logo and two smaller boxes inside that are clickable, but that have no writing on them. There is also a smaller box to the left of the larger one that I an click on and make a tick appear, which then allows me to click on the right hand box. I am then asked to type in my password and then it takes me to a progress bar but still absolutely no text..
I have no idea whats going wrong! Any other ideas?!
Thanks in advance
Date: Fri, 2 Sep 2011 12:45:33 -0600
From: [email protected]
To: [email protected]
Subject: Flash and Mac Power PCs..
Hello,
You are correct that the latest version of Flash Player no longer supports PPCs. However, you can grab the last release of Flash Player to support PPC here:
http://forums.adobe.com/thread/895134?tstart=0
Thanks,
Chris
>

How do I open a wps document on my Mac??

How do I open a wps document on my Mac?? I have word.....

when you're on word - click on file - open - on the section that says enable - you can choose the following: see image. try either all readable documents or all files.

I am being asked to upgrade to iCloud Drive but indications are that I will not be able to access up to date details on any of my documents on my Mac without going into iCloud first. Have I got this interpretation right or can I save changes to acce

I am being asked to upgrade to iCloud Drive but indications are that I will not be able to access up to date details on any of my documents on my Mac without going into iCloud first. Have I got this interpretation right or can I save changes to access the new versions on my iMac?

That is Apple's statement:
Using iWork with iCloud Drive - Apple Support
Options for iWork customers
You can upgrade to iCloud Drive today if you want to keep your documents up to date in iOS 8 and OS X Yosemite, and you want to use the iWork web apps on iCloud.com and the Share via iCloud feature.
You can upgrade to iCloud Drive later if you want to keep your documents up to date with your apps on iOS 7 or earlier and OS X Mavericks or earlier.
Upgrade to iCloud Drive today
To access the most recent versions of your documents from a Mac with OS X Mavericks or earlier, you’ll need to go to iCloud.com and access Pages, Numbers, and Keynote from there. On a PC, you can install iCloud for Windows and set up iCloud Drive.
If you upgrade to iCloud Drive now:
Your documents will keep up to date across devices with iOS 8, Macs with OS X Yosemite, PCs with iCloud for Windows, and iCloud.com.
Your documents will no longer keep up to date on devices with iOS 7 and Macs with OS X Mavericks or earlier.
You’ll be able to use the iWork web apps on iCloud.com.
You’ll be able to use the Share via iCloud feature with iOS 8, OS X Yosemite, and iCloud.com.
Documents you previously shared via iCloud will be accessible to collaborators.
Upgrade to iCloud Drive later
Note that until you upgrade your iCloud account to iCloud Drive, you won’t be able to use the iWork web apps on iCloud.com or the Share via iCloud feature. If you don’t upgrade to iCloud Drive at this time:
Your documents will keep up to date across devices with iOS 8 and across devices with iOS 7 and Macs with OS X Mavericks or earlier.
You won’t be able to use the iWork web apps on iCloud.com.
You won’t be able to use the Share via iCloud feature.
Documents you previously shared via iCloud won’t be accessible to collaborators until you upgrade to iCloud Drive.

Problems with Mail after upgrading to MAC OS10 version 10.6.8

I upgraded to MAC OS10 version 10.6.8 about ten days ago, and have since had lots of problems with mail. Since I upgraded, I have downloaded several software updates, including one for improving the general softeware system of Leopard. Since this morning, I no longer have the Mail icon in the dock and when I try to open it in Applications a window comes up saying:
'You can't use this version of Mail with this version of Mac OS X. You have Mail version 4.5 (1084/1085). It can't be used on Mac OS X Version 10.6.8 (Build 10K549)
Can I download a version that I can use with this Mac, and can anybody give me the site where I can find this. I have tried without success

You should consider downloading the 10.6.8 combo updater and applying it again.
http://support.apple.com/kb/DL1399
Pondini has a great page about upgrading.
http://pondini.org/OSX/Combo.html

How do I link to a document in the cloud using Pages. It seems to only give me a choice of linking to a document on my Mac

It seems to only give me a choice of linking to a document on my Mac.

You can't hyperlink to icloud. This is what the Pages User Guide says:
Using Hyperlinks and Bookmarks
Hyperlinks and bookmarks are used in documents that will be viewed onscreen, either as HTML files or as Pages documents. You can add hyperlinks to jump to another page or to open an email message or a webpage on the Internet. Use bookmarks to mark passages in the document that you want to refer to as you work.
You can download the Pages User Guide from your Pages Help menu.

Crashing document Flash 8 Mac OS10.5.6

Similar Messages

Maybe you are looking for