Crashing during Export - I tried to export my sequence both in Premier and AME and it keeps crashing - Help Pls.

Crashing during Exporting - I tried to export my sequence containing several clips both in Premier and AME and it keeps crashing - Help Pls.

Thanks for your reply John.
My Premiere Pro is CS5.5 on Windows OS with all the recent updates installed.
My source footage is H.264 in a .mov/QuickTime format.
There were no error message(s) before the crashing. The computer just crashes after a few minutes of exporting. My output codec is also H.264 in a QuickTime movie format.
No other software is running at the time. Also, no third party codecs have been installed.
I'm not sure what type of engine I use. Kindly direct me to where I can find this information.
The problem has only happened with my final output.
Thanks Again.
Gloria

Similar Messages

I am trying to add a footer and Adobe Pro XI keeps crashing

I am trying to add a footer to my document and Adobe Pro XI keeps crashing. Any ideas?

What is your Acrobat XI version? If less than 11.0.09 I suggest you update to that latest version.
Note that you posted in the forum for Acrobat.com online services; you may get better help if you ask in the Acrobat forum. You should also state your operating system.

I updated to the iSO6 and my phone now keeps crashing while saying, "Invalid SIM." What do I do?

I updated to the iSO6 and my phone now keeps crashing while saying, "Invalid SIM." What do I do?

Thank you very much! I actually tried doing that with a paper clip but was not successsful. I feel I tried plugging in the clip in in every possible way and it still did not work. Is there is a special trick to the way this needs to be done? I felt like if I kep pushing, I was going to damage the device.

My 1st generation i-pad has been acting up lately. Can't open, safari, email, facebook and other apps, it keeps crashing. Is there a solution outside of replacing it.

My 1st generation i-pad has been acting up lately. Can't open: safari, email, facebook, i-book and other apps, it keeps crashing. Is there a solution outside of replacing it.

Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
If that didn't help either, try restoring your iPad > iTunes: Restoring iOS software

When i go to install creavtive cloud it says check the connection, try again but however my connection is fine and i've tried my friends connection and the same thing keeps happening HELP!!!

when i go to install creavtive cloud it says check the connection, try again but however my connection is fine and i've tried my friends connection and the same thing keeps happening HELP!!!

Sign in, activation, or connection errors | CS5.5 and later
Mylenium

Media Encoder CC2014.2 crash on windows when trying to export when quicktime is installed

Hi,
I'm trying to export .mov files (created on random Mac computers in very hi-res) to reduce file size, and have the same output format. (possibly 1080p H.264-> .mp4)
I installed Media Encoder cc2014.2 on my pc (win7, 64bits, french).
When I first tested, Only the audio was being exported. But I soon realized I didn't had the proper codec installed on my PC.
(I wasn't able to play the original video file, only the audio was playing).
So, like a good boy I installed Apple Quicktime (7.76.80.95)
With quicktime on my PC I was able to play the original video file. (with quicktime player)
So I opened Media Encoder again, and on the preview this time I can see the video with the sound. But as soon as I start the coding (the little green arrow) Adobe Media Encoder crash.
I have tried multiple output format, it always crash right when I start exporting the file.
I uninstalled Quicktime, and media encoder is working again ... but my original files (.mov) can't be exported with video, only the sound.
I have tried a third party codec (K-Lite), I can see the video+sound on my pc, but Media Encoder is still blind, no video, only the sound.
Is there a way to add codec to Media encoder without having to install Quicktime?
Or a way to make Media Encoder work on my PC when Quicktime is installed?
btw I'm sorry if my text is a bit confusing, I'm french speaking
Thank's in advance!

The Error is back!!!
Yesterday it worked today it crashes when I export from premiere via media encoder. I tried it with all the things you told me:
1. Bars+Tone => export => crash
2. Video Project with 2 short h264-files => export => crash
3. Software only renderer => crash
These are the two logs that I found:
Ereignis-ID 1000
Die Leistungsindikatoren für den Dienst WmiApRpl (WmiApRpl) wurden erfolgreich geladen. Die Eintragsdaten im Datenbereich enthalten die neuen Indexwerte, die diesem Dienst zugeordnet sind.
System
Provider
[ Name]
Microsoft-Windows-LoadPerf
[ Guid]
{122EE297-BB47-41AE-B265-1CA8D1886D40}
EventID
1000
Version
0
Level
4
Task
0
Opcode
0
Keywords
0x8000000000000000
TimeCreated
[ SystemTime]
2014-04-16T08:25:51.922502600Z
EventRecordID
3402
Correlation
Execution
[ ProcessID]
19984
[ ThreadID]
24964
Channel
Application
Computer
Schnittplatz
Security
[ UserID]
S-1-5-18
UserData
EventXML
param1
WmiApRpl
param2
WmiApRpl
binaryDataSize
16
binaryData
38270000DE27000039270000DF270000
So it would be great if you have any idea what to do...

IPhone is stuck on iOS4 and won't update, keeps crashing

Help!?! My dads iPhone4 is stuck on iOS4, everytime I try to update the software iTunes crashes. I've tried everything, disabling the firewalls, stopping the back up... I also cannot connect to the iTunes Store. Any suggestions?

Read https://discussions.apple.com/thread/3896498?tstart=0

In iPhoto I get "unable to render file for export" when trying to export a file to an SD card?

I have been trying to save jpg files to an SD card. When I export from iPhoto is says "unable to render file for export". It will let me export to the desktop. Then when I try to copy or move to the SD card, it says the SD card does not have enought free space. It's a 1 gig card and the files are under 100k. I have tried different SD cards, formating the cards with the camera. The card has 200 filles (57mb) when I started and wanted to add more. I have ereased the card trying to see if that would help. No go! Any ideas?

What is the filesystem on that card?
i assume, you made sure that the little white lock mechanism at the side of the card is unlocked?
Try, if you can set the "Ignore ownership on this volume" flag for the card in the "Get Info" panel for the card.

GTX570 crashes during games/3D - tried everything

Hi,
I got a fresh computer :
Cooler Master CM690II Advanced
MSI P67A-C45
Core I5 2500K
Noctua NH-U12P
2x2 PC1600 GSKILL
MSI GTX570 1go
ANTEC HCG-620W
Win7 64bits
And since 1 week it worked perfectly. But today, it has suddenly got an error while playing SC2 and I could not launch and play a game or an application which involves 3D...
I can run the bench of Afterburner for hours and can't run SC2 or League Of Legends without any freeze (the game still continues as I can hear the sound).
I put Afterburner CC on 732 / Shader Clock 1464 / Memory Clock 1900.
When I attempted the windows bench, it freezes and the screen became black. When I put the speed fan% at 85, the windows bench worked perfectly. I tried on SC2/LOL but even with a speed fan% set at 85, it freezes before the black screen.
So, I have read to update the drivers, to rollback to another version, to try directX11/directX10 etc. It does not work !
Do you have any solution please ? Is it an hardware problem which requires to get the card back to the seller ?
Thanks in advance for your help.
Best Regards,
Ace

Hi Svet,
Thanks for your quick answer. I did :
Drivers removal with Driver Sweeper in Win7 Safe Mode;
Install lastest driver 275.50 (beta) from Nvidia;
Re-install DirectX11;
===> The windows bench was passed perfectly 7.5 (7.5/7.9/7.9/7.6 SSD FTW) ! There is a hope, I am going to try LOL (when the queue will be passed -1hour? :D) and SC2. Gonna give a feedback asap.
Thanks,
Ace

Can't install new itunes and mobile device support keeps crashing

a while ago, i tried getting new quicktime, but my computer crashed in the middle of the updating (also a problem- anyone know why it keeps lagging, freezing, and crashing on me?). i ignored it, and plugged in my ipod a few days later. itunes wouldn't pop up, and when i clicked the icon, i got a popup saying "itunes not found, please reinstall" or something along those lines.
i tried reinstalling it, but it gets stuck at "copying new files". i also tried getting the new quicktime, but it get stuck about 2/3s through it. also, after leaving my computer on for a night to see if it would install, i started getting a popup from microsoft windows saying that "MobileDeviceService has stopped working". if i try to check online for a solution, the popup dissapears after a while, but pops up again in a few seconds. same with if i just close the popup. this popup has also started to appear the second i log on to my computer.
i also tried uninstalling mobile device support (using this), but when it's preparing for installation, my computer freezes and stops working.
tldr: updated to quicktime, but crashed in the middle. now i can't get new itunes or quicktime, and i get popups about apple mobile device support that won't go away. any suggestions?
and my computer started to lag and freeze a lot about a month ago.. i'm not sure why. but it's been very annoying since i have to keep hitting the power button cause the freezing doesn't allow me to do anything. i ran 3 virus scans, and only 1 managed to finish without crashing, and it's telling me that nothing's wrong. i've also uninstalled and deleted a lot of things, but that hasn't helped either.
i have vista, and would really appreciate some help.

anyone?
*i've managed to download quicktime, but am still unable to download itunes. after reaching a certain point in downloading itunes, (about 1/3 of the way?) it stops at "copying files", and my computer freezes and i have to hold the power button in order to shut it off and do anything, or i get a popup asking me if i want to change something so itunes can finish downloading. i click "yes", but then the download stops completely and i get a message saying "itunes has finished downloading, but with errors" and it tells me to download it again.
a popup from MobileServiceDevice keeps appearing as well, but it won't go away. the details are:
Problem Event Name:    APPCRASH
Application Name:    AppleMobileDeviceService.exe
Application Version:    17.88.0.7
Application Timestamp:    4e66ceff
Fault Module Name:    kernel32.dll
Fault Module Version:    6.0.6002.18005
Fault Module Timestamp:    49e038c0
Exception Code:    c06d007f
Exception Offset:    0001e124
OS Version:    6.0.6002.2.2.0.768.3
Locale ID:    1033
Additional Information 1:    fd00
Additional Information 2:    ea6f5fe8924aaa756324d57f87834160
Additional Information 3:    fd00
Additional Information 4:    ea6f5fe8924aaa756324d57f87834160
but the fault module name changes on me. sometimes it's kernel32.dll, and sometimes it's something else, and i've already tried using task manager /find str but it doesn't help.

Photoshop CS6 (and other Adobe applications) keep crashing

The crashing started with the Retina update for Photoshop and Illustrator. At first the occasional crash happend, but now it's doing it litreally every 2 minutes! I don't think its a problem with my system since the issue started as soon as I got the Retina update and I've had no issues prior. If it helps I have the 2.3GHz Intel Core i7, 8GB 1600MHz RAM, Retina Macbook Pro with OS X version 10.8.2. I'm not sure if all of the Adobe applications are affected, but I know Photoshop, Illustrator and InDesign are.
This is part of the "Problem Details" window that popped up after crashing:
Process:         Adobe InDesign CS6 [5559]
Path:            /Applications/Adobe/*/Adobe InDesign CS6.app/Contents/MacOS/Adobe InDesign CS6
Identifier:      com.adobe.InDesign
Version:         8.0.1.406 (8010)
Code Type:       X86 (Native)
Parent Process: launchd [142]
User ID:         501
Date/Time:       2012-12-26 13:45:03.257 +0000
OS Version:      Mac OS X 10.8.2 (12C3012)
Report Version: 10
Sleep/Wake UUID: 4857A87C-2FDB-41B8-A339-ADEF1D1113E7
Interval Since Last Report:          24089 sec
Crashes Since Last Report:           3
Per-App Interval Since Last Report: 1440 sec
Per-App Crashes Since Last Report:   3
Anonymous UUID:                      51687551-0733-F076-F725-67BCD812A3AC
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_BAD_ACCESS (SIGBUS)
Exception Codes: KERN_PROTECTION_FAILURE at 0x0000000000000000
VM Regions Near 0:
--> __PAGEZERO             0000000000000000-0000000000001000 [    4K] ---/--- SM=NUL /Applications/Adobe/*/Adobe InDesign CS6.app/Contents/MacOS/Adobe InDesign CS6
    __TEXT                 0000000000001000-0000000000005000 [   16K] r-x/rwx SM=COW /Applications/Adobe/*/Adobe InDesign CS6.app/Contents/MacOS/Adobe InDesign CS6
This really needs to be fixed, if anyone has a solution please let me know, it's making my A-levels impossible to do!
Thanks
EDIT: I've noticed that when I press the T key in InDesign to bring up the type tool, the application crashes. Trying this in Photoshop it doesn't! Very strange.

We can't help you with InDesign crashes in this forum.
And to figure out the cause of a crash, we'd need to see the entire crash report, not just the first few lines.
But you should make sure that all the applicaitons are up to date.

I upgraded my ipad mini and now itunes u keeps crashing

Everytime i open itunes u it opens one particular course, when i click library it crashes. This is only since upgrading to IOS7. If i uninstall and reinstall will i lose all my courses?

Resetting your settings
You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple.
Here is a link to their contacts with most of the information below.
http://www.apple.com/contact/

How do i uninstall and reinstall software that keeps crashing upon opening?

big problems with NEAT software. no answer at company. aint no apple.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
Still in the Console window, look under User Diagnostic Reports for crash reports related to the process. The report name starts with the name of the crashed process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

Since I've upgraded my Foxfire and Adobe Flash it keeps crashing when I try playing Treasure Island in Facebook. Should I uninstall both and start again?

Ive upgraded Foxfire and Adobe Flash and since upgraded all it's been doing is crashing. I send a crash report and try again with the same result. This has been going on for many days...help

I found the solution here, it's really works!
I'm glad I found this site.
http://ituneserrorfix.blogspot.com/2013/11/how-to-fix-error-4013.html

Updated to ios7.0.4 phone crashed and now not recognized by itunes help pls

someone pls help me i just dont know what to do?

Everything will be erased, unless you copied yoru itunes media library to your new computer.
Sorry No, downgrading isn't supported by Apple.

Crashing during Export - I tried to export my sequence both in Premier and AME and it keeps crashing - Help Pls.

Similar Messages

Maybe you are looking for