Crashing in edit mode

just loaded vista x64, loaded fix, transfered activation ....runs fine...but....i load a multitrack session (done on xp x64) comes up fine, everyhting works, then i select a track, right click, edit source file, edit window opens, i hit play and bam. adobe audition has stopped working... any clues? oh... if this issue has been posted please send me to the right place and thank you. p.s. i also have 1.5 loaded and no problems there.

Hi Don,
My first suggestion would be to click Edit > Audio Hardware Preferences and ensure the same audio driver is selected for EDIT VIEW and MULTITRACK VIEW. Since MT view works, my first guess is that Edit View is configured for a different driver.
If it is set to Audition 3.0 Windows Sound, I would take Floyd's advice and investigate whether your sound card manufacturer has a Vista-compatible ASIO driver available.
Audition 1.5 supported DirectSound/WDM drivers, which are slower and prone to the temperments of the operating system. Audition 2.0 and up support ASIO drivers natively, which allow for faster, more direct access to the hardware, but with trade-offs that include not sharing nicely with multiple applications.
Let us know how it goes!
Durin

Similar Messages

IPhoto crashing in Edit mode

Every time I open a photo in Edit mode and then try to move to another photo, either by clicking the "next" arrow or by clicking on another photo in the bar at the top of the screen, iPhoto simply crashes.
Any ideas why?
I only have 256mb of memory, but I cannot believe that can be the problem...can it?!
I have about 1100 photos in iPhoto, all quite high large (but no RAW files), but it does it even when I'm Editing a folder with five photos in it...

Hi Alastair. Don't be embarrassed. There's always something new to learn and thankfully usually someone out there who's come across your problem before. Can't help you with your original problem, but I can say iPhoto 5 does seem more inclined to quit expectedly, more than version 4. I've taken to quitting manually at key points if working on a big job. (A bit like saving regularly on a pc.) When you get the option to file a report, I tend to send one off as the more they get, the more likely they are to take note and fix it.
As for your hard disk question: click the apple (top left), click "about this mac", click more info, click ATA, That will open a list. One of the 2 options will show your HD capacity and available space.
Good luck.

Lk 6.2 Crashes when you "Save All" in edit mode

From Lk 6.2 bugs post. Thought this needs it's own thread.
I've had lots of crashes after "Save All" menu command while in edit mode. Recently, the crashes were all after draging display objects to panels and/or copying objects between panels. It is very repeatable. Exiting edit mode prior to saves prevents crashes.
Ryan, can you confirm this and put on your fix list?
Ed
Message Edited by erblock on 04-29-2009 10:53 PM

Ed,
I tried to drag some displays and save all, but could not reproduce the crash.
Have you tried to create a new process or load different process to repeat the crash? Maybe the crash is related to certain kind of process, or related to a certain object?
If possible, could you upload your process to ftp://ftp.ni.com/incoming? The crash is more critical which should not happen in any situation.
Ryan Shi
National Instruments

CS3 mediacore issue. (Editing modes/plugins)

Hi, I've been having an unresolved issue the past couple days. I can't seem to figure out what's wrong. I looked up my problem on different boards but I haven't found one similar to mine.
So I own a macbook pro, running on a Mac OS X version 10.6.3, and I have Adobe After Effects CS3. So far, my main issue is with the "mediacore" plugins at the start-up. Sometimes it crashes and sometimes it says "failed to initialize mediacore." I tried checking this problem out by looking inside what's in the Mediacore folder. So I viewed my plug-ins folder and then went inside the Mediacore. In the folder, I found a subfolder called "Editing Modes" and it contains an "Adobe Editing Modes.xml" and under the subfolder, is a list of the next following:
- CompilerQuickTime.bundle
- ImporterAiff.bundle
- ImporterFastMPEG.bundle
- ImporterFlash.bundle
- ImporterMP3.bundle
- ImporterMPEG.bundle
- ImporterQT.bundle
- ImporterWave.bundle
- PlayerMac.bundle
I tried to delete only "Editing Modes" folder and leave the bundle files in place. Afterward, After FX started up properly without crashing. It just gave me an error saying "failed to initialize mediacore" and then the program worked. The only problem with this is, I wasn't able to import any movies or mp3's. They're all grayed out. I wasn't able to drag and drop videos or sounds either. They just didn't work.
So, I undeleted "Editing Modes" and I deleted the bundles. The same thing happened. THE ONLY difference is, when I leave Editing Modes and the bundle files in the folder together, the whole program crashes at start up. So the program works only with one or the other deleted.
Ugh, I don't know what the problem is exactly! I also have QuickTime Pro 7 installed and I have QuickTime X.
Does anyone have a solution??
Also I'm able to export PNG's (seems to be the only workable files) out as quicktime movies, but I can't import. Importing is my only problem.

Something is severely busted. I'm afraid you will have to reinstall the app and also have to reinstall Quicktime. Also of course do the usual and run a Repair permissions to fix any potential file access issues, trash the AE prefs and clean out the media cache manually. Location of folders here.
Mylenium

Adobe Pro X crashes while editing the forms

Hi, I've been using Acrobat X Pro to edit forms for weeks now with no problems.
Yesterday it has started crashing as soon as I entering Form Edit mode. I reinstalled it and it did not help.
I am running it on Windows 7 home edition (64 bit).
Please help.

Still having the problem.
I open any PDF in Adobe X, and go to Form -> Edit. It sais that Document cannot be edited and suggests to Save a Copy.
Ok, I save a copy.
Now, I open up a COPY that I have just saved and go to Forms-> Edit.
Fields are being highlighted, but when I click on any field Adobe just crashes.
Also I have another problem - some of the fields on the document become uneditable. I do not understand why I was able to change them before and cannot change them now. This is very frustrated.
I am on Win 7, 64 bit. I have Adobe X and Reader X installed on this PC.
Please Help.

Lookout 6.1 Edit Mode Bug

I don't remember seeing this in older versions of Lookout, but in 6.1:
Edit mode allows you to open a second session of object editing. It used to be you had to close an open object edit (connections, data member configuration, etc) before opening another.
Well in 6.1, it will let you open a second one....and Lookout will always crash after you close them and save the process (sometimes it will crash before you try to save).
Ed

Ryan,
Windows XP SP2 32-bit, fully updated. Dell Precision 690 with single Xenon 5160 dual core @ 3.0GHz
I sent you an email with more details....
I have not restored to original release 6.1 only. I will progress the entire upgrade path scenario when I have time to reload the machine in question and I'll test each phase.
Ed
Message Edited by erblock on 03-31-2008 01:38 AM

Can't open photos in edit mode

I can;t open photos in edit mode in iPhoto '08. When I double click on a photo the main window remains blank (no "!" no"?"). This problem occurs with every photo in the library. My permissions are OK. I've also tried setting the preferences to edit in Photoshop but double clicking on the photos then still accomplishes nothing.

Steve:
Do you get a blank white window in the edit mode? If so that may mean you do not have access to the files. Try the following:download and run BatChmod on the iPhoto Library folder with the settings shown here, putting your administrator login name, long or short, in the owner and group sections. You can either type in the path to the folder or just drag the folder into that field.
FYI:
Using Photoshop (or Photoshop Elements) as Your Editor of Choice in iPhoto.
1 - select Photoshop as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
If you want to use both iPhoto's editing mode and PS without having to go back and forth to the Preference pane, once you've selected PS as your editor of choice, reset the Preferences back to "Open in main window". That will let you either edit in iPhoto (double click on the thumbnail) or in PS (Control-click on the thumbnail and seledt "Edit in external editor" in the Contextual menu). This way you get the best of both worlds
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Can't view photos in edit mode

Hello,
I just upgraded to iPhoto '08, and while I can view all my thumbnails ok, the photos themselves won't load at all in edit mode.
I was using iPhoto to try to"jumpstart" my iWeb (per my other help request in another topic) when I noticed this.
I have Leopard 10.5.2, iPhoto 7.1.2 and a 1.8 GHz processor and 512 MB RAM in my upgraded G4 tower. I tried deleting the preferences file, rebuilding the library file, opening in another account, etc, with no luck. I had even just erased my hard drive and cleanly re-installed Leopard, etc. with still the same problems in both apps. Do I just need to add more memory perhaps? I can't think of anything else...?Does Leopard require much more memory than Panther (which I had before) to run properly?
Thanks,
Paul

I've had the what sounds like the exact same problem with iPhoto '08. I, too, have an upgraded 1.8 GHz G4 (AGP Graphics) running OS 10.5.3 (although the original installation was 10.5.1 and the same problem occurred before the software updates). When I try to edit a photo, the edit window opens but no picture appears. Clicking on the various editing tools and manipulating them (blindly, on a blank screen) shows that editing is actually taking place, and that changes can be saved.
An earlier post of mine concerned the first problem I noticed since my OS and processor updates; namely, that the DVD player app won't work, but instead returns an error message saying that a valid device could not be found for playback. Several responses to that post seemed to suggest that the ATI Rage 128 video card might be the culprit and that it would need to be replaced. In the past week I've been on the phone or in email contact with tech support people at ATI, Sonnet, Other World Computing, and Apple, the last being the least knowledgeable of all of them, I'm sorry to say.
The Sonnet guy personally runs a computer just like mine, but with the ATI Radeon 9800 Pro Mac video card. That item costs $209 at OWC. But ATI says it won't work because of the G4's 200 power supply.
These folks think that the iPhoto problem would be solved by the new video card -- but I'm not yet convinced I want to spend that kind of money to find out. Most also say that the DVD Player issue would be fixed, although the OWC guy says it has nothing to do with it.
So we're going blind here, with much conflicting expert opinion. I'll keep watching for further discussion.
cc

Unable to open a view in edit mode

Hi All,
I have a Notes assignment block in the Account Overview page. It contains a text area and an EDIT button to modify the notes. Corresponding view and context node for this block are BP_DATA/NOTES and NOTES respectively. Notes context node is bound to Text context node of the component controller.
The issue is, when agent confirms an account, goes to Overview page and clicks on EDIT button of the Notes block, then, if the block already has some text, then it turns in to EDIT mode. But if Notes section is empty initially, then, on click of EDIT button will not make the view editable.
During debugging, I can see that if notes section is already filled with some text, then there is an entity in the collection wrapper of the NOTES context node(also in the component controller collection wrapper). But if notes section is initially empty, then collection wrapper is empty(both view and component controller context nodes).
My requirement is to make the notes section editable even if there is no text present in it initially. It will be very helpful if someone could give me suggestions on this issue.
Thanks and Regards,
Naren

Hi Nitish,
Thanks for your reply. Infact I only coded the event handler. In the first line, I am reading the entity from the collection wrapper of the context node. If it is bound, only then I can set it in EDIT mode.
ob_entity ?= me->typed_context->notes->collection_wrapper->get_current( ).
IF ob_entity IS BOUND.
Sets the view in EDIT mode
Now, ob_entity is null if there is initially no data in the notes section of the confirmed account. However, if notes is not empty, then, ob_entity is bound and I can set the view to edit mode. This is the issue.
Regards,
Naren

How can I open an email file in edition mode?

Hi!
I use a system here in my company that generates an automatic email and prepare it to be sent.
We were using MS Outlook and we have migrated to thunderbird for lots of reasons.
But since it has migrated, the system cannot generate this email in the composition screen.
It generates in the inbox.
Is there anything I can do to change this?
I have made a few tests and I realize that the same thing happens if I save an email file in my computer and
try to open if with the thunderbird. It's supposed to open in edition mode, so the user can send it out, with just one click.
Thank you!

https://support.mozilla.org/en-US/questions/1004680

Text Caption appears in Edit Mode but not in Preview Project or Web Browser

I'm using Cp4 and have downloaded Adobe Flash 10 Active X, it's ver 10.1.82.76. I've added a simple text caption with these options:
Timing Display: Rest of slide
Appear after: 2.0 seconds
Transition effect: Fade in only
In: .5 seconds
And Visible is checked
I also have a simple line that I drew with the draw line tool and included an arrow on the end of it.
Everything on the screen works including the click box, the animated text and the failure caption. For some reason the text caption and the arrow are not appearing except in Edit Mode. In Preview Project, they disapper but the click box, failure caption and animated text work fine.
I've rebooted, copied this screen into a new instance of Cp4, re-created these objects on a freshly recorded screen, chosen Order: Bring to Front, created a brand new screen completely from scratch and downloaded the Flash 10 Active X version mentioned above.
They funny thing is, is that the text caption and arrow works fine on other screens in the project. I have 76 screens total.
I'm running Windows XP.
Any suggestions?

Hi there
Can you post a screen capture of what your Timeline looks like?
Odds are your Click Box is pausing in a weird place.
Cheers... Rick
Helpful and Handy Links
Begin learning Captivate 5 moments from now! $29.95
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcererStone Blog
Captivate eBooks

Ctrl+tab is not working in editing mode

I have JcheckBox and JTable in my JPanel. When user clicks or presses F2 to edit any cell value of the JTable a comboBox will appear with possible values. (This comboBox is coming from table CellEditor). When user presses ctrl+tab from the table focus should transfer to JComboBox all time. It is working only when the user presses ctrl+tab from the table cell which is not in editing mode. If the user presses ctrl+tab from the table cell which is in editing mode (i.e. focus is on the ComboBox of the cellEditor) it does not work. Please help me to find the solution.
I give a sample code here for your reference.
public class Frame1 extends JFrame {
public Frame1()
super();
this.setLayout( null );
this.setSize( new Dimension(400, 300) );
JTextField ch = new JTextField();
ch.setVisible(true);
ch.setBounds(10, 10, 10, 10);
this.add(ch, null);
DefaultTableModel tmodel = new DefaultTableModel(3, 1);
tmodel.setValueAt("0 0 1",0,0);
tmodel.setValueAt("1 0 1",1,0);
tmodel.setValueAt("2 0 1",2,0);
JTable custLayersTable = new JTable(tmodel);
custLayersTable.getColumnModel().getColumn(0).
setCellEditor(new ComboEditor());
custLayersTable.setBounds(new Rectangle(40, 40, 280, 145));
custLayersTable.setSurrendersFocusOnKeystroke(true);
this.add(custLayersTable, null);
public static void main(String[] args)
Frame1 a = new Frame1();
a.setVisible(true);
final class ComboEditor extends AbstractCellEditor
implements TableCellEditor
public Component getTableCellEditorComponent(JTable table,
Object value,
boolean isSelected,
int row,
int column)
Vector<String> layerValSet = new Vector<String>();
for(int i=0; i<3; i++)
layerValSet.add(row+" "+column+" "+i);
mComboModel = new DefaultComboBoxModel(layerValSet);
mComboModel.setSelectedItem(value);
mEditorComp = new JComboBox(mComboModel);
return mEditorComp;
public Object getCellEditorValue()
return mEditorComp.getSelectedItem();
private DefaultComboBoxModel mComboModel;
private JComboBox mEditorComp;
}

Thanks a lot for your reply.
Since the textField is in a different class i could not use the transferFocus API directly. I tried the following code in the keyreleased event of Combo Box but it was not working.
KeyboardFocusManager.getCurrentKeyboardFocusManager().focusNextComponent(
e.getComponent().getParent());
I also tried the following code in stopCellEditing and is not working.
KeyboardFocusManager.getCurrentKeyboardFocusManager().focusNextComponent();
Is there any other way to achieve this?

Deleted Items Stay in Edit mode?

When Adding Items to a portal, for instance an Image... and then I want to delete that image... I can delete it so the image no longer shows on the finished page, but the Item still shows in the Edit mode. How do I delete the Item so it no longer shows in Item mode

Assuming that you are using 10g: 
Yes, you can disable this feature. Click on Properties of the Page Group that you want to disable this feature. Go to the third tab Items. 
On this tab you will see 2 options : 
Retain Deleted Items 
Display Unpublished, Expired, and Deleted Items In Edit Mode 
Either enable or disable based on your preferences.

FBL5N - Feild selection non editable mode

Hi All,
When i execute FBL5N transaction,i am not able to select the feilds as per my desire bcoz the feild display ICON is in non editable mode.
The only option i have is layout selection and not the feilds selection.
Can you let me know how to change it to editable mode.
regards

Hello,
You don't have authorization for maintain ALV layouts. Please contact to your Basis department for authorization.
ALV layout authorization object is S_ALV_LAYO. Please tell your Basis departman to give this object value for '23'.
Regards,
Burak

How to open an order form of a particular order in edit mode

hi
i need to open a order's order form in edit mode so that it can be approved or any other operations done on that.
there is an similar post but the soln s nt available fr the abve mentioned prob
" i dont knw what are the exact parameters that should be assigned in ordfind so that it will lead to the ordhead"
thank u in advance for any guidance that cud be provided.

I m using oracle appln server 10g forms. I m trying to open tat form using a url.. generally i m accessing via a java program where i m giving tis url.

Crashing in edit mode

Similar Messages

Maybe you are looking for