Crashing - Logic Audio? M-Audio FastTrack Pro?

I just upgraded to Leopard. Using Logic Audio \ M-Audio Fastrack Pro. Just installed an eSATA PCI controller card for external drives.
No trouble with Logic 8 \ Tiger \ M-Audio Fastrack Pro.
Going to look for new drivers for Fastrack Pro.
Mmm. Any ideas come to mind out there?
All ears,
Ben

I think it was my M-Audio Fast Track Pro driver. Installed the latest one. Haven't had a crash in twenty minutes. That might have been the issue...

Similar Messages

Problems with M-Audio Fasttrack Pro and Garageband after 10.5.2

Hi all,
I use GarageBand daily with my M-Audio FastTrack Pro and have had absolutely no problems until I installed the 10.5.2 update.
Suddenly the Audio randomly cuts out when I'm recording, monitoring or playing back - also my recordings appear to skip and jump too. Usually I can rectify it by power cycling the Fasttrack but the problem re-occurs after about 30 seconds of recording.
I have double checked the I am using M-Audio's latest drivers and have repaired permissions and the disk. I was wondering if anyone else had had any problems with this?
All help would be appreciated, looks like I'm going back to 10.5.1 though.

Hi !
Still no answer from M-Audio but it seems that they are not in cause.
I read on several topics of Apple's Forums some similar problems with other audio devices and also with some USBhubs.
I ran some little tests and for my case, using the other USB port of the MacBook seems to resolve the problem (but that's not a permanent solution for my point of view).
Using a selft-powered USBhub works also, even on the port that makes it crash without hub.
As I studied a little bit of electronics, it looks really like a problem of power supply through USB to me. It could be some kind of micro-cuts (or micro-undervoltage) that are sufficient to cut the audio stream and freeze a bit the system but not enough for MacOSX to switch significantly to the internal audio.
But two questions still remain :
Why one USB port of the MacBook and not the other one ?
Why since 10.5.2 ?
Steve, if you hear me ;o)
'Hope they will react quickly !

I need HELP connecting a M-Audio FastTrack Pro USB with a Behringer 1202!!!

i need some assistance wireing up my personal studio. Im running on a Mac Pro Tower Logic 8. I have a M-Audio FastTrack Pro USB interface and want to hook up a Behringer 1202fx mixer. How exactly do i do the wiring for this???what settings do i need to change in system preferences or in Logic.????? PLEASE HELP ME!!!!!

It depends what you want to do, and what gear you are hooking up and what you want to do with it.
How you hook it up really depends on your needs, which you don't specify.

M-Audio FastTrack Pro output works, input fails.

Greeting, Archers
I'm trying to get microphone input for the M-Audio FastTrack Pro working.
So far, I have output working.. but with input.. no dice.
I would rather not have to install windows or Ubuntu Studio.. but that is my last resort :S
KTHXBYE
Last edited by StrongDrink (2011-09-10 23:36:17)

Yes, I beleive I am. I'm using Gnome-Shell at the moment, and I think it comes with pulseaudio by default.

Using MIDI cable with M-Audio FastTrack Pro

I have 2 keyboards. One has USB MIDI, so I just plug it directly in to my computer and Logic sees it. I also have a nicer keyboard (weighted keys), but this one doesn't have a USB out. It has a 1/4" jack and a 5 pin MIDI jack. I've tried plugging it into my FastTrack Pro using a MIDI cable, but it doesn't seem to work. What am I missing?
Thanks

Hi !
Still no answer from M-Audio but it seems that they are not in cause.
I read on several topics of Apple's Forums some similar problems with other audio devices and also with some USBhubs.
I ran some little tests and for my case, using the other USB port of the MacBook seems to resolve the problem (but that's not a permanent solution for my point of view).
Using a selft-powered USBhub works also, even on the port that makes it crash without hub.
As I studied a little bit of electronics, it looks really like a problem of power supply through USB to me. It could be some kind of micro-cuts (or micro-undervoltage) that are sufficient to cut the audio stream and freeze a bit the system but not enough for MacOSX to switch significantly to the internal audio.
But two questions still remain :
Why one USB port of the MacBook and not the other one ?
Why since 10.5.2 ?
Steve, if you hear me ;o)
'Hope they will react quickly !

Playing keyboard hard crashes logic / audio recording delay

Hi all,
Would appreciate some help with some very odd behaviour.
I have a Yamaha S90ES hooked up which works fine via midi EXCEPT when I hit the keys really hard, no sound comes out at all. The transport display doesn't show a midi note, just 1 0 or something (aftertouch values? maybe, not sure). Then after you bash away for a bit Logic crashes (report includes EXCBADACCESS and KERN_INVALID-ADDRESS).
Even weirder, when I bash F#2-C3 really hard no note is heard but the screen set changes, F#2 being screen set 1, G2 being 2 etc. Any ideas?
Also - this is probably a separate problem, but is driving me equally crazy. When I record audio (e.g midi tracks from the S90ES) they end up about 4000 counts (looking in sample editor) behind the beat. No clue why.
I have a dual G5, 1Gb of ram, Logic 7 and a Presonus Firebox.
Would really appreciate any help with these problems, they're doing my nut in!
Jamie

Hi all,
Would appreciate some help with some very odd behaviour.
I have a Yamaha S90ES hooked up which works fine via midi EXCEPT when I hit the keys really hard, no sound comes out at all. The transport display doesn't show a midi note, just 1 0 or something (aftertouch values? maybe, not sure). Then after you bash away for a bit Logic crashes (report includes EXCBADACCESS and KERN_INVALID-ADDRESS).
Even weirder, when I bash F#2-C3 really hard no note is heard but the screen set changes, F#2 being screen set 1, G2 being 2 etc. Any ideas?
Also - this is probably a separate problem, but is driving me equally crazy. When I record audio (e.g midi tracks from the S90ES) they end up about 4000 counts (looking in sample editor) behind the beat. No clue why.
I have a dual G5, 1Gb of ram, Logic 7 and a Presonus Firebox.
Would really appreciate any help with these problems, they're doing my nut in!
Jamie

I'm using Logic 9 with a Macbook Pro. On one project I'm getting a message ' not enough processor power.' I've tried freezing all tracks but this seems to have no effect. I've also bounced all soft synths to audio.

I'm using Logic 9 with a Macbook Pro. On one project I'm getting a message 'not enough processor power' and the computer stops playing
I've tried freezing all tracks but this has no effect. I've also bounced all soft synth tracks to audio, but to no avail. The computer stops playing
even at the start of the track where there is nothing but a kick drum happening.......

Thank you for the suggestions.
I had previously tried all of the above but the airport/wireless thought. Unfortuneately, none of these things made a difference, including the wireless suggestion.
Currently, I am using my Mac's "cheapo" internal audio hardware (haha). I have a one year old 27-inch iMac, a good pair of bose speakers, and a polk sub. I don't believe it is an issue with my setup, considering I completely disconnected and unplugged it.
I did, however, do a little info hunting on the internal audio situation, since I was curious what is actually included, and I stumbled upon this interesting little tidbit about my model of iMac:
https://discussions.apple.com/thread/2718054?start=0&tstart=0
I had previously wondered if I was hearing my mouse in my speakers as well (not just in logic). It appears that this model of iMac may have some grounding issues, as someone later in the thread suggested purchasing and using a ground loop isolator, which seemed to fix any extra interference for them.
Ironically though, I have since opened logic, and do not seem to be encountering my previous static issue(yet).
Fingers crossed, hoping that I will not be experiencing it again. Going to purchase a ground loop isolator, and continue to mess around with logic, just to make sure it was not just an internal audio issue with my iMac.

I have several Files created in Logic Audio for windows bfreo v 5 wich can't open in Logic Pro X. Any ideas for a solution to his problem,

I have several Files created in Logic Audio for windows before v5.5.1 which can't open in Logic Pro X. Any ideas for a solution to this problem, The Windows files that were created in v5.5.1 open OK. I lost my XS key during a recent house move so can't update to windows files before trying to open in Logic Pro X
Swingtones

If you can open the windows files in windows you can bounce the tracks out as audio. Then load them in X

Logic audio engine crashes while streaming video and recording 4 channels simultaneous audio

logic audio engine crashes while streaming video and recording 4 channels simultaneous audio

Hi there,
I also wanted to thank you for your response and let you know that I have tried all those trouble shooting things you suggest to no avail.
it seems to me that the first explanations are most likely to be the case.
namely that the program can multithread while the plugs only use one processor (particularly EXS24) which is bloody useless.
also increasing the buffer to 1024 is not an option cause you gotta bloody lay tracks, which means you gotta hear the BG tracks and play yours on top in time otherwise, you record your new tracks and they are so out of time that it sounds like a little kid wanking on a guitar or whatever...
and of course for composition with midi intruments it doesn't work at all cause your latency becomes so huge that you would need a miracle to quantize your off time notes back to normal so that you can arrange, print score, etc.
either way, I hope that my tone is not disrespectful, it is aimed at apple in frustration, I'm grateful for your help.
thank you
David

Marquee selecting audio region then hitting DELETE crashing Logic

When I marquee select and audio region and hit delete it crashes Logic everytime. Is it a setting I have maybe unknowingly checked off that restricts the use of marquee? It happens when I marquee just audio AND audio+blank space. How am I supposed to trim as I go along?
OK, now it's working, but I'm not going back to the original place where it was happening. Is it possible that one little piece of audio gets corrupted?
This has happened a couple times just like this...I'm halfway through posting a message on this topic and it self-corrects, but then when it happens again I'm kind of scratching my head again.

stooby3535 wrote:
After further troubleshooting I've realized that the suspicious audio file that prevents the project file from opening is actually not corrupted itself. I can still play the audio file in other media software like Quicktime, etc. with no problem.
This leads me to believe the problem opening the project file lies solely with the corrupted 'documentData' file.
Does anyone have any ideas about how I could somehow open this project file and delete the reference of the troublesome audio file from the project's audio bin?
Well... it really sounds like the project itself is corrupted, that's one of the reasons all project files won't load from a certain point on.
Try this.
Reboot the Mac.
Open the Applications folder and boot Logic from it's icon.
As soon as the Logic Logo/graphic window appears on the screen hold down the control key. You will see a message pop up that says something like "Launch the Core Audio Driver" there will be yes/no choice available... select NO.
Go to the File menu and selct "open" go find your project file and see if it will open. If it does.. delete the audio file in question... however.. I would also look at any plugins you recently installed and are possibly using in this project...this sounds more like a plugin problem rather than an audio file problem, but that's just a gut feeling.
Anyway, if it opens delete whatever you suspect and save under a different name.
Reboot Logic and see if it can load the project.
pancenter-

Is there anyone use M Audio Axiom Pro 61 with Logic Pro 9?

Does Axiom Pro's Hyper-Control work fine with Logic Pro's Plug-in and Instrument?
Please Share your Opinion

{quote:title=majo> Can Axion Pro Control Soft Instrument such as Sculpture as well as Plug-in?
Yes.
Is there any Logic Plug-in that Axiom Pro can't Control?
No.

HT200169 Having a problem with Logic 9 on a Mac Pro.Working on a lenghty song and apparently session got corrupted.Doesnt let me export tracks,program crashes.Already tried start brand new session with the tracks imported into it but still wont export.Sug

Hello,having a problem with Logic 9 on a Mac Pro.Working on a lenghty song and apparently session got corrupted.Doesnt let me export tracks,program crashes.Already tried start brand new session with the tracks imported into it but still wont export.Suggestions?

Thanks, Ian. Yeah, that's how I do it now...or with the controls in the left side pane. Still, I would have liked that quick on-the-spot edit capability...especially while sketching.
Ian Turner wrote:
Sorry Mark, you are out of luck as it does not do that - it works the same as L8. The way I would achieve that with more accuracy and control would be to route all the tracks you want to fade to a Bus then use volume automation on the bus. To do this you will need to add a standard audio track, then re-assign it using (Control Click on the track header) to the Bus track. You can then automate volume/plugins etc on the Bus track.
Ian

M-audio fasttrack

I can't get my fasttrack to play into logic. I have verified with maudio that its working and class compliant. How do I get logic to recognize it, so I can record? Help!

I have a FastTrack Pro, but I can't get Logic Pro 7.2's master output to route to Fast Track Pro's audio outputs 3/4.
Anyone know how or why I can't?
Avi
iMac Core Duo 2.0 Mac OS X (10.4.5) Western Digital 250 GB, 1.5 G Ram, 20 inch screen

Looking for logic audio platinum version 6

I have looked high,and low,i cant find it on ebay,craigslist,anywhere.Does anyone know where i could find Logic audio platinum,version 6,for os 9?Every site that had it expired,or doesnt have it any more.Any ideas would be wonderful,thanks

Iguanawood wrote:
a new Intel G5?
First of all, a G5 computer uses a Motorola processor, not an Intel.
There's no such thing as an Intel G5.
I found this:
http://cgi.ebay.com/Final-Cut-Studio-2-HD-Full-Retail-Edition-Pro-FCP-6W0QQitemZ310211295520QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item483a08b920#h t_920wt1076

Logic audio 6

I just purchased logic audio pro 6,im not sure if it is the 6.4.3 version,but if it is logic 6,is the upgrade to 6.4.3 free?

Hi, d -
This page may help -
http://download.info.apple.com/AppleSupport_Area/emagic/LegacySW/OS9%20SW/

Crashing - Logic Audio? M-Audio FastTrack Pro?

Similar Messages

Maybe you are looking for