Crashing on New Sequence

I installed the free trial and every time I try to create a new sequence the program crashes - help? I have an INTEL PC with plenty of storage - brand new.

You should be able to get the above from your system information on a PC, I've listed mine below ... but that list is, without acronyms:
OS ... operating system, as in Win 7 Ultimate or whatever;
CPU ... what main "chip" is your computer built around? I've got an Intel i7-4770 and on as seen below;
RAM ... how much memory does your machine have, typically like 8Gb, 16Gb, or so;
GPU ... your video card ... mine's the GTX770 from below;
vRAM ... how much video memory is on the video card ...
Driver version ... what does your system say is the driver in use for that video card?
The build number of PrPro I told you how to find within PrPro. You'll have to tell us what your media is from, whether it's say an mov file or mp4 or AVCHD ... whatever. Is it from a camera? If so, which?
There's an info palette in PrPro, click on any asset in the Project panel, choose the info palette, and it will tell you what type of codec, frame rate (23.976? 20.97? 60?) & frame size (1280x720, or 1920x1080 or whatever). Either that or in the Explorer right-click on a file and it should give you an option for details on that file.
Now ... you imported, then from the Project panel, got PrPro to make a new sequence, and when you try & do something with that sequence, then it crashes? A screen grab of your sequence settings would be awfully nice ... Windows has the "Snipping Tool" buried in the programs/Accesories folder off the start menu. Send that to your desktop as a shortcut, drag it down onto your task bar, then go into PrPro and select a panel ... click on the snipping tool on your task bar, then use the cursor to select the "box" of the screen (drag it diagonally to select an area) you want to get a picture of, save it to your desktop with a name ... then paste that into your message.
Neil
Microsoft Windows 7 Professional 6.1.7601 Service Pack 1 Build 7601
Intel(R) Core(TM) i7-4770K CPU @ 3.50GHz, 3501 Mhz, 4 Core(s), 8 Logical Processor(s)
Installed Physical Memory (RAM) 16.0 GB
EVGA NVIDIA GeForce GTX 770
4Gb vRAM
Driver Version 347.52
w/ monitors on HDMI & DVI outs
System: 2-disc SSD RAID
Cache Files: SSD
Media Files: 2TB Internal HD
Project Files: 2TB Internal HD
Export Files: 2TB Internal HD

Similar Messages

Why does Adobe Premiere CC crash whenever I put a new sequence in?

Just tonight, while editing for my short video with my new capture card, an interesting problem occurred. Whenever I paste a clip of any kind, no matter the format or the quality, I put it into a new sequence and it takes just 3 seconds to crash adobe immediately. I've tried with other files and even on previous projects, they'll do the same thing. How did this happen and really, how can I fix it?

I just got this computer in December. I have been using CS5 with no problems at all. Yesterday, I tried to save a very simple file to the desktop and illustrator crashed. It is happening any time I try to save the file to anyplace other than the one file that comes up when I use the "save as" or "save" command. Its happening no matter how small the file is.
I have already removed almost everything from my desktop as one person suggested. I have uninstalled illustrator, run the cleaner program, restarted and re installed illustrator. I have updated illustrator to the current version.
I am using osx yosemite 10.10.2
I have 16 g of memory.
I have 258G free out of 500G total of storage.
I am at a loss.
Do you know why it would be crashing?
Please help.
Thank you.

Premiere Pro crashes after making a new sequence from media file

Every time I upload a video file and make it into a new sequence, a message pops up saying, "A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available." I've already re-installed the program, and checked to see if I had SP1 which I do. The crash report says:
Faulting application name: Adobe Premiere Pro.exe, version: 8.2.0.65, time stamp: 0x5486db4a
Faulting module name: OpenCL.dll_unloaded, version: 0.0.0.0, time stamp: 0x50eb1a5b
Exception code: 0xc0000005
Fault offset: 0x000007fee3d916a0
Faulting process id: 0x18b4
Faulting application start time: 0x01d01f2d436f22a0
Faulting application path: C:\Program Files\Adobe\Adobe Premiere Pro CC 2014\Adobe Premiere Pro.exe
Faulting module path: OpenCL.dll
Report Id: d2fb308f-8b20-11e4-80e1-d897ba034251
Any ideas on what I can do to get it to work again??

In light of the faulting module (OpenCL.dll) and the exception code (0XC000005), I'd start by updating the graphics driver--manually through the card manufacturers site--or, if it's a laptop, from the computer manufacturer's site. Don't rely on Windows to get you the latest. If that doesn't work, try switching the Renderer to Software Only [File>Project Settings>General].
If those measures don't work, then check the suggestions in this article: Computer tricks and tips: How to Fix 0xC0000005 Error

Premiere CC crashing when dragging sequences to Media Encoder CC

I've always been able to do this in the past, but suddenly when I drag a sequence or multiple sequences to Media Encoder from Premiere, Premiere crashes and gives me the following:
Premiere Pro has encountered an error.
[/sirreact64/releases/2013.03/shared/adobe/dvamediatypes/project/mac/../../src/TickTime.cp p-219]
and then a box pops up in Media encoder that says
Dynamic Link Error
Source is empty.
Anyone help?
17" Macbook Pro with 10.7.5
Premiere CC
Media Encoder CC

I am using the most updated version of PPro CC with OS 10.8.5. It seems to have issues with certain sequences and not others. It also may be the files themselves. They play fine in the program viewer and I have sent them to Media Encoder before, but if I create a new sequence with the same settings and copy the files into it, the same thing happens. I have a lot of 29.97 720x480 (1.21 pixels) and 1440x1080 (PAR 1.333) footage to edit together and create dvds out of (not my idea - it's a job) and I am in the middle of trying various ways of encoding to make it as clear as possible.
Currently I am using 1440x1080i HD anamorphic sequence settings encoding into 1440x1080 p HD anamorphic with frame blending, maximum render quality, Target bit rate of 30 VBR 2 pass. Then combining those files with other sequences into a longer 1440x1080 p HD anamorphic sequence and encoding MPEG 2-DVD NTSC widescreen progressive 100% quality, VBR 2 pass and the output is much better. This has been working, and today suddenly it stopped and started crashing. Any ideas?

Can't Create New Sequence

FCS2 Upgraded and updated yesterday.
For some reason starting today I can't create new sequences. New Sequence doesn't make a new sequence in any of the bins (but doesn't crash - just nothing happens), whether from the File menu or right-clicking in a bin.
Importing XML (from Color or even via Color > Send to FCP) doesn't create a sequence either.
Creating a new project gives me an empty project, with no sequences in it either.
Anyone?

And, as always, FCP Rescue can make backing up or trashing your preferences nice and easy.
http://fcprescue.andersholck.com/
Once you've got a functioning preference set, you can back it up to restore later in case this happens again.
--Tex

Can anyone point me in the right direction for the link to download Acrobat 9 Standard? I found the link to download 9 Pro but not standard. Old computer crashed and new computer does not have a CDR/DVD rom drive.

Can anyone point me in the right direction for the link to download Acrobat 9 Standard. I found the link to download 9 Pro but not standard. Old computer crashed and new computer does not have a CDR/DVD rom drive.

Hi,
Standard or Pro would be licensed through your serial number, the download link and downloaded file would be the same for both of them.
Pro or Standard would be determined after you put in your serial number.
Download Acrobat products | 9, 8
Thank You
Arjun

How to use new sequence when one is reached its maxvalue in PL SQL code

Hi,
Currently, I am populating a unique product serial number in a table column using a sequence call to generate new number. For different products, I have different sequences and in my PL SQL code usiing IF..Else block I populate serial number for different products. For one most selling product sequence, we are reaching a Max value in production in a month and to make sure that application will continue to work fine for various end users without getting any error on their screens, I want my code to switch to new sequence automatically. I just need to add another if condition but my problem is how to find accurately when max value is reached for old sequence.
As call to old sequence can happen in different sessions there could be inconsistency and can end up at error. My new sequence value has to start with AV1000. Please suggest.
My old sequence look like this :
SEQUENCE Prd
INCREMENT BY 1
START WITH AS1000
MAXVALUE AS9999
MINVALUE AS1000
CYCLE NOCYCLE
CACHE 2
Order Yes;
Edited by: user11695088 on Jul 15, 2009 12:14 AM

Catch the exception and use your new sequence. But somehow, I'm not liking your alternative approach.
SQL> set line 300
SQL> set pages 50000
SQL> set serveroutput on
SQL> create sequence testing_seq increment by 1 start with 1 maxvalue 3
2 /
Sequence created.
SQL>
SQL> create or replace procedure test_seq_proc(p_seq out number)
2 is
3 begin
4     select testing_seq.nextval
5     into p_seq
6     from dual;
7 --
8     dbms_output.put_line(p_seq);
9 --
10 end;
11 /
Procedure created.
SQL> declare v_out number;
2 begin
3     test_seq_proc(v_out);
4 end;
5 /
1
PL/SQL procedure successfully completed.
SQL> /
2
PL/SQL procedure successfully completed.
SQL> /
3
PL/SQL procedure successfully completed.
SQL> /
declare v_out number;
ERROR at line 1:
ORA-08004: sequence TESTING_SEQ.NEXTVAL exceeds MAXVALUE and cannot be instantiated
ORA-06512: at "ETL_ADMIN.TEST_SEQ_PROC", line 4
ORA-06512: at line 3
SQL>Cheers
Sarma.

Changes to master nested sequence not updating in new sequence

Good morning - I have spent the past half hour or so searching the forum for this topic but have not found the answer. If the answer exists elsewhere, please point me in that direction; otherwise, here goes:
I created a nested sequence by simply dragging one sequence (A) from the browser into a new sequence (B) in the timeline. Later, I went back to Seq A and replaced all of the audio (which was in-camera audio) with clean audio from a Tascam field recorder. So far so good. However, Seq B still plays the original camera audio and is not reflecting any of the changes I made to Seq A.
I tried deleting audio render files, quitting and restarting FCP, etc., all to no avail. I have the latest versions of the OS and FCP. Any suggestions would be much appreciated.

As you've probably found there are several ways to create/edit nests into sequences. The manual points out an advantage of using nested sequences is you can make a change and that change will be reflected in all the subsequent nests. As you've also found out, this isn't exactly true.
The only way I've found to have communications carry forward to nests from the original sequence is if I edit the sequence into another sequence via the Canvas overlay/edit keyboard shortcuts from the Viewer. I've found dragging and dropping to do as you've found.

New sequence not conforming to clip settings

I'm using FCP 6.0.6. I've got some iPhone 3GS video clips (shot with the Super 8 app). When I create a new sequence, and then drag one of the iPhone clips to the sequence, the sequence does not conform to the low res iPhone settings. I've tried setting my FCP prefs to "always" and "ask" for auto conform. Neither is working--when set to ask, it doesn't ask, and when set to always, the sequence doesn't conform.
Any thoughts? Thanks.

It would make no sense to enlarge your clips to 1280x720.
The problem is your original material is not in a standard video size.
You might try converting it to ProRes422 while leaving the material in the 480x320 size. Make sure you convert the audio to 48khz as well.
Once converted, create a new sequence and drop one of the newly converted files into it. The timeline sequence should be adjusted to allow for realtime playback.
Good luck.
x

Working in FCP6, open a project, sequence not showing ANY fonts from motion master templates. Start new sequence and they appear fine. Whats up with it?

So here's what I've got: one of the first gen Intel Macbooks with 2gb RAM, running a fresh install of FCS2, fully updated. I pulled out my external with my project on it (saved in the same version), that I keep my demo reel updated on. I've always used the motion text master template files to label each clip and for some reason, this round the text isn't appearing. Let me be clear just how weird this is: the template file will show up in the viewer, but any file set in this sequence will be blank. If there is any graphics to the file, IT shows up, but not the text. I opened up a new sequence and and first added a new master file to it, and it showed up on that sequence. I then went to the old sequence and copy/pasted the clips in it to the new sequence and the text shows up as well. What is up with the original sequence that is causing this issue??? Any thoughts? (unfortunately, my copy of Final Cut is a "Not for Resale" (NFR) so I can't call in for support.
Thanks in advance!!!

Hi Miro,
I was just experiencing a similar problem today. In my situation I was getting the diagonal lines and the new project wasn't actually being trimmed, it was the same size as the original with all of the media from the original project .
It turns out that even though I was selecting 3 specific sequences out of 20 the Project Manager was ignoring that selection, it brought over those 3 sequences but all of the media from the other sequences. I think this is what was creating the problem.
The trim unused media box (or whatever the check box says) was greyed out.
My solution was to create a new clean project and import the 3 sequences I wanted to create a new trimmed project from.
Then using the Project Manager everything worked as expected, the project was trimmed down and there were no diagonal lines. I unchecked the "rename media" option, not sure if that was necessary part of the solution.
This seems like a bug to me, we shouldn't have to create a new project, it's an extra unwanted step and clutter on our systems.
Hope that helps!
I'm on Mac 10.8.5 and Premiere 7.0.1, eagerly awaiting to update once the bug fixes to the bug fixes are fixed.
Gerry

No sound in new sequence

To fix a video resolution problem, I copied all my clips and audio from one sequence into a new sequence. The old sequence plays back perfectly, with the new sequence has no sound. What have I done wrong?
Any help appreciated.

Thanks Jim. Appreciate the post. A little background. When I started this project I could not get any sound out of Premiere at all. Talked to support for a long time and finally updated the audio drivers and this seemed to work. But not completely. The ONE project that I got working had sound, but not if I created a new project. So what I did is save as the working project into different folders then change the name and the clips. This worked, until now.
Back to Premiere support to see what I can do I think.

Insert new sequence (project) into an existing project?

For a slide show mixing stills and video over songs:
Project was "finished," with images arranged and sequeing as I wanted, and matched to three songs. Including credits, all nicely wrapped up.
I now have to add more images and 1 new song. *This new sequence+song needs to insert between the current songs 2 and 3, maintaining all existing footage and audio as is.* (In other words, song/sequence 3 will still be the final sequence.)
What is the best way to go about this?
1) Create a separate Project B, and then insert that as a whole video+audio sequence into current Project A? Is that even possible?
2) Insert the new audio track where it will live and begin assembling images against it?
3) Insert and assemble the new images and then add the audio?
4) Some other way?
A related query: when adding new audio, it goes in as one large green b.g to the images. On my current project, each audio track is a simple line underneath the images. This latter way is much easier to deal with. How can I make that happen?
Thanks much.
Jonathan

Add your new images first. Then drag the new audio track and drop it on the first of the new images.

Insert menu item blank in sequence editor for new sequence

In TestStand 2.0.1, when I create a new sequence file using the sequence editor and right-click to insert a step, the Insert menu is greyed out.
If I open an existing sequence file, copy a step from it, and paste it into the empty sequence, then whatever that step was (let's say Action) becomes available on the Insert menu.
Is there any way to fix this other than re-installing TestStand? Any idea why this is happening?
Thanks,
Gizmogal

Hi,
This sounds like you have a problem with your type Palette files in sowe way.
Check out if you can read the ini files found in teststand\cfg\TypePalettes.
Regards
Ray Farmer
Regards
Ray Farmer

Linking Effects from Old Sequence to Newer Sequence?

Hey guys!
Sort of complicated question that I'm hoping has a simple solution.
I have a two hour sequence that has been edited in Premiere CS6. While I was finalizing the edit, I had someone doing color work on the piece in Magic Bullet in Premiere CC. Now that the edit is finalized, there's a difference of ~25 minutes between one sequence and the other, related to minor edits, medium edits, and entire scenes being removed. Both sequences reference the same media.
Is it possible to quickly apply the color work from his sequence (applied as effects to each clip) to the newer sequence with the edits that we want?
Thanks so much for any help you can provide!

Hi ctbckdrptrn,
Please check the b tutorial given below which shows how to copy and paste the attributes from one clip to the other in Premiere Pro CC. Hope it helps.
http://tv.adobe.com/watch/learn-premiere-pro-cc/paste-attributes-to-multiple-clips/
Regards,
Vinay

Copy setting to new sequence

I'm working on an HD project and when I copy the sequence and paste it in a new sequence where do make it the same settings? I went to settings and it looks like they are the same.

1) It's only been a few hours. Calm yourself.
2) You hardly gave any information to work off of. "HD sequence"? What kind of HD? What do you mean "copy the sequence and paste it in a new sequence"? Are you taking about nesting, or just duplicating clips? "I went to settings" is not quite a sentence.

Crashing on New Sequence

Similar Messages

Maybe you are looking for