Crashing when exporting Raw to Jpeg Windows

when converting from raw to jpegs sometimes my computer crashes completely, a complete stop!!!!
other times it comes up with problem and needs to shut down listing
AppName: lightroom.exe     AppVer: 3.6.0.10   ModName: msvcr100.dll
ModVer: 10.0.30319.415      Offset: 00010b90
AppName: lightroom.exe     AppVer: 3.6.0.10   ModName: cameraraw.dll
ModVer: 3.6.0.10   Offset: 001fc314
no phone was connected to my pc,  the problem is when i run up lightroom, sometimes i can use it then it may suddenly crash the computer switching off completley, other times it says lightroom has a problem and needs too shut down the bout info is what is shown as the problem. hope this helps.

I know this is an old thread, but I have the same problem and am hoping perhaps to get some new feedback.  I also have used all the same settings,
the best quality settings that I can do on export, but the quality I get when I convert to JPG is very poor. I do save at 100% because I want to send some of my images to stock agencies that want JPGs but at the very best possible quality.  I have experimented in changing the resolution to 300, resizing to 18MP (which is the native size from my camera (Canon 7D), leaving the resizing box unchecked, and tried all all levels and types of sharpening, and none of these settings makes any improvement.  I honestly do not think this is an issue of color calibration.  The images that I get when I convert from RAW to JPG are are very poor quality, but not so much noise as they appear pixelated.  I am going to try to attach a screen capture of a RAW image and a JPG that has been converted.  Realize there is a bit of loss of quality in both of these images as they were done by the print screen function, then saved as BMP and then JPG..But doing it this way actually produced a much better quality image than exporting the RAW file to JPG in LR3. Both of these images were saved at 100%
The image at the top is a small segment of the RAW capture at 100% and the bottom one is a segment of the same area of the exported JPG at 100% Note the writing and how it is very pixelated. I think you would agree that it is quite a deterioration in quality.  Any suggestions you have would be greatly appreciated.
Thank you.
Message was edited by: wyeaton
I'm sorry that the images do not appear to be showing up on the thread.  They do show up when I uploaded them and when I edit them, but I don't see them once I do the update.  Any suggestions there would be appreciated as well.
Thanks.

Similar Messages

  • My new iMac with FCPX crashes when rendering complex templates and crashes when exporting with Motion 5

    My new iMac with FCPX crashes when rendering complex templates and crashes when exporting with Motion 5
    Using Motion 5.0.6 and Final Cut Pro X 10.0.7 on New iMac (December 2012)  Mountain Lion,
    Intel Core i7 quad-core a 3,4GHz, Turbo Boost fino a 3,9GHz
    32GB di SDRAM DDR3 a 1600MHz - 4 x 8GB
    Fusion Drive da 3TB
    NVIDIA GeForce GTX 680MX 2GB GDDR5
    During the rendering of complex FCPX mac crashes and I have to force a restart.
    I also happens when I try to export movies with Motion 5.
    Does anyone have the same problem with my new iMac?

    Problems such as yours are sometimes caused by files that should belong to you but are locked or have wrong permissions. This procedure will check for such files. It makes no changes and therefore will not, in itself, solve your problem.
    First, empty the Trash.
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Triple-click anywhere in the line below to select it, then drag or copy it — do not type — into the Terminal window:
    find . $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 -o -acl \) 2> /dev/null | wc -l
    Press return. The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
    The output of this command, on a line directly below what you entered, will be a number such as "35." Please post it in a reply.

  • Exporting RAW to JPEG and TIFF

    Evaluating LE to hopefully improve some workflow. I noticed however, that when export to a JPEG or TIFF format the file size seems much smaller that I'm accustomed. A D100 9.5MB RAW file converts to appx 2.7Mb JPEG at 100% and appx 7MB in TIFF. Currently when I convert I get a 17-20MB JPEG. I'm I missing something in the setup or is this the larger file size LE produces.
    Murray Edwards

    Excuse me Lightroom. I currently use Portfolio 8 to review and tagged a large number of images for production. They have a conversion process that allows you to convert a NEF file to JPEG or TIFF. When converting to from a NEF file that is appx 9.5MB in size to a JPEG at 100% @300DPI which is what my clients require, it produces a a JPEG file that ranges from 17-23MB depending the amount of information. But I still have to pull that image into editing SW to do some cleanup or slight exposure adjustments. It was my hopes that by using Lightroom, I could slimline a couple of these processes. But if LR only provides a exported JPEG file size of what I've seen thus far, then I would unable to accomplish this.
    Is this better clarification of my question?

  • CS2 InDesign crash when exporting

    Hi,
    I've got a copy of CS2 InDesign at work that crashes when exporting a certain file to PDF.
    The files have limited information on each page except for placed PDF & JPG images. The images themselves seldom get above 300kb each, but there are lots - some times 5 per page in an 80 page document. It's a document to be printed so the images are as small as they can be.
    When exporting the document, ID crashes without warning - it just vanishes, no dialog box saying 'This application unexpectedly quit' or anything.
    Is this common? I have plenty of memory on the Mac, and no other applications or windows are open at the same time.
    Any suggestions as to why this happens?
    All text in the PDF images are outlined in Illustrator so presumably it's not a type recognition issue.
    Any suggestions welcome.
    cheers
    G

    Hi Bob,
    System spec is PowerPC G5, version 10.4.11. I'll have to ask our Mac expert
    if CS2 is fully patched.
    Cheers for your response.
    G

  • Crystal Crashes when exporting to PDF

    Hi Experts,
       Crystal reports crashes when exporting a report to PDF. I am using Crystal Reports for SAP Business One, what could be causing this..is it a patch level problem ?

    Hi,
    Please check this thread http://scn.sap.com/thread/3303863.
    What is your B1 version and PL?
    Thanks & Regards,
    Nagarajan

  • Media Encoder crashes when exporting from Premiere Pro

    Media Encoder crashes when exporting from Premiere Pro. I am queueing multiple files for export and Media Encoder will crash. The computer system has 32GB of RAM and the videos export fine in Premiere, but that requires exporting each one individually. Each video file is being down converted and some can be quite long (upwards of 3-5 hours). Nothing else is running on the computer that would take up memory.
    Any idea why Media Encoder will crash?

    Try turning off GPU acceleration.

  • Photoshop crashes when rearranging layers in layer window.

    Photoshop crashes when rearranging layers in layer window.  I'm using Photoshop CS4 Extended on a MacBook Pro purchased 5 months ago. I have tried restarting the computer.  I am able to rearrange layers with the hot keys.

    Boilerplate-text:
    Are Photoshop and OS fully updated?
    As with all unexplainable Photoshop-problems you might try trashing the prefs (after making sure all customized presets like Actions, Patterns, Brushes etc. have been saved and making a note of the Preferences you’ve changed) by keeping command-alt-shift pressed on starting the program or starting from a new user-account.
    System Maintenance (repairing permissions, purging PRAM, running cron-scripts, cleaning caches, etc.) might also be beneficial, Onyx has been recommended for such tasks.
    http://www.apple.com/downloads/macosx/system_disk_utilities/onyx.html
    Weeding out bad fonts never seems to be a bad idea, either. (Validate your fonts in Font Book and remove the bad ones.)
    If 3rd party plug-ins are installed try disabling them to verify if one of those may be responsible for the problem.
    Does turning off OpenGL in the Performance Preferences and restarting Photoshop have any bearing on the issue?

  • Incopy CS6 crashes when exporting to pdf

    Incopy 6 crashes when exporting to pdf. Message – unknown error

    Hi Sushmar
    My editor edits with Incopy 6, everything goes well until she wants to export a pdf, Incopy 6 then crashes. Incopy 5.5 does not have this problem. Please point me in the right direction, as we have extremely tight deadlines and no other way of working.
    Tx
    LVG

  • Is ILife 11 the current version today? Will its purchase upgrade my Iphoto 8.2.1 to Iphoto 11? I have a Macbook, Maverick and Iphoto is crashing when exporting photos.  I understand ILife is the way to fix it.

    Is ILife 11 the current version today? (May  2014).  ILife 11 on Amazon appears to be 3+ yrs old?
    When searching for ILife 11 on the Apple Store, I am directed to a separate purchase of Iphoto version 9.
    Somewhat confusing, Apple is always so clear with these things. 
    The goal is to upgrade my Iphoto 8.2.1 to Iphoto 11.
    I have a Macbook Pro, Maverick 10.9.2 and Iphoto is crashing when exporting photos. 
    I understand ILife is the way to fix it.
    Thanks!

    The current version of iPhoto is iPhoto 9.5.1., and it is the latest version of iPhoto '11.
    If you are running Mavericks 10.9.2, you can buy iPhoto 9.5.1 from the AppStore - it is the currently sold version.
    The iLife bundle is called iLife '11, and the iPhot version in iLife '11 is iPhoto 9.x.x. - that is confusing allright
    I have a Macbook Pro, Maverick 10.9.2 and Iphoto is crashing when exporting photos.
    While it is certainly useful to upgrade to the current iPhoto version to be fully compatible with MacOs X 10.9.2, there may be a differnet reason for the crashes. Is there an error message with the crashes? When did these start? Did you import new photos or videos? Install other software?

  • Flash CS5.5 crashes when exporting movieclip for Actionscript

    Hello,
    My Flash CS5.5 crashes when exporting movieclip for Actionscript (select movieclips -> modify -> convert to symbol -> check export for actionscript). I think this only happens when Photoshop CS5 is open.
    Does anyone know how to fix this? I'm using Win7 64-bit. The only open programs are Flash, Photoshop, and Firefox.

    Oddly enough, I opened up Flash again, today, just to see if it was still the same, and it had worked. Everything seemed normal, I opened a new document and started working. Then, out of nowhere it stopped responding again. So I waited for it to respond, it didn't. I closed it from the task manager, and now it's back to the original problem of crashing when I try to create a new document or open an old ontrie
    Update: I tried the cleaner, as you'd suggested. Followed all the steps, but to no avail. Think it may have something to do with my machine, and less with the software?

  • InDesign Crashes when exporting to InCopy

    I support several hundred InDesign/ InCopy users. We have been using this workflow for several years.
    Approximately a month ago, we migrated to CS5 (7.0.3). I began to immediately get support calls that InDesign and InCopy were crashing. A few of the calls were that InCopy was crashing when pasting text from MS Office, but he overwhelming majority of the calls are for InDesign crashing when exporting stories to InCopy. If exported one at a time, the stories export fine. When exporting all stories or an entire text layer of stories, it will crash nearly without fail.
    Our environment consists of Mac Pro 2x2.66Ghz and 2.8Ghz Intel Core Duo 2 iMacs running 10.5.8. with CS5 7.0.3. This is happening on multiple machines. A few of them have been gone over to verify base OS integrity, permissions repaired, DiskWarrior run etc… to make sure we did not have individual machine issues.
    I need resolution for both issues, but the crashing while exporting is so prevalent that my graphic designers are starting to really get aggravated.
    I searched the forum for "InCopy", for "export" and for "crash." None of those terms returned a single hit. I can't imagine those terms are not in this forum, so I am working on the assumption that searching must be broken at the moment.
    Thanks in advance for any guidance,
    Kevin

    Try posting on the InCopy forum. There was another similar report there...
    Did you fill out a bug report?
    Harbs

  • IMovie 11 crashes when exporting to Quicktime

    iMovie 11 crashes when exporting to Quicktime.  Some people have posted that this problem disappeared when they upgraded from Lion to Mountain Lion.  However, I am running Mt.Lion and it still happens.  If there is no fix for this bug, does anyone know a workaround that will produce the same ultimate result..namely, a Quicktime movie that is not too large to attach to emails.  Apple, please fix this.  Thank you.

    Update after two Apple iApps specialists spent 1.5 hours on the phone with me:  There are 3 "poison pills" (that we know of) that will cause the crash if any of the three is part of the movie:  Picture-in-picture, side-by-side, or a circle open/close transition. Otherwise, no crash.  The specialist made a movie on his own computer, containing the poison pills, but he exported to Quicktime without a crash.  There is at least one report in the threads of a problem like mine.  Thus, some Gremlin is causing this, in some computers.  The iApps specialist was curioius to know whether a lot of people have this problem, or only a few.  (If a lot, then it is worth submitting to the engineers to fix.)  He said if you have this problem, call Apple.  I asked if such people should post a "Me too!" on this thread.  He said no, better to call Apple and report it.  So that's the story.  I can live without those poison pills in my export-to-quicktime movies. I am just a consumer, not a pro, and I can live with it.  But it would be nice if Apple could fix this.

  • When converting RAW to Jpegs in Batch converstion, I'm getting 2 copies of everyone.  Why??

    When converting RAW to Jpegs in Batch converstion, I'm getting 2 copies of everything.  Why??

    Oops, so you did. I must have been on auto-pilot
    I don't have any of those tracks in my library so I can't tell you that any of them work for me. If Genius works overall then it's probably a matter of sampling a critical mass of playlists that already contain those songs, for it then to be able to suggest suitable "mixes". I've not tried to get to grips with the mechanism behind Genius but I'd guess it works something along these lines. Your library gets inspected and some kind of summary gets uploaded to a server which integrates data from lots of users, and then gives you some back. Perhaps the process just does take time.
    tt2

  • Final Cut Express FCE Crashes when exporting to Quicktime or Quicktime conv

    Final Cut Express FCE Crashes when exporting to Quicktime or Quicktime conversion!
    This started completely out of the blue last night. The export gets about 30-50% done and FCE disappears from the screen and the "FCE quit unexpectedly" message pops up. This has never happened before and I was doing exports of this very project all week. All other projects won't expect, the current project won't export when brought into a new file, I tried reinstalling FCE, and I deleted the pref files spoken about in the forum.
    Any Ideas!!!????

    Try repairing permissions and re-boot.
    Al

  • Workarounds for project crashing when exporting?

    I have developed a project in captivate 6 which is now crashing captivate when I export it.   I can preview it in 'Web Browser' and 'HTML 5 output'.  But when I export it as a SCORM package it crashes.  I was able to do that yesterday but today it's crashing.
    Any suggestions?  Any one?
    Slides contain nothing fancy except just mp3s, text and graphics.
    Specs
    Captivate 6 project
    Tested on both Mac and PC
    From,
    Luke L

    Hi Luke,
    In Project Preferences, Start / End there is an option preload startscreen.
    Best regards.
    Philippe
    Le 15 oct. 2012 à 21:48, Luke L PSA <[email protected]> a écrit :
    Re: workarounds for project crashing when exporting?
    created by Luke L PSA in Import/Export - View the full discussion
    thank you tchiboo.
    Which start screen is this?   Thanks for the help desperate to know.
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4775908#4775908
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4775908#4775908
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4775908#4775908. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Import/Export by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Maybe you are looking for