Crashing when re connecting to Broadband

I diconnect from broadband each night
Each morning when I attempt a reconnection I usually find the computer crashes
This does not happen every time but almost
I have bluetooth kboard and mouse
Any ideas?
Charlie
i mac g5 Mac OS X (10.4.5) thomson speed touch 330 modem

Hi, charles.
In addition to Matthew's comments, it would also help if you would precisely define what you mean when you wrote:"...the computer crashes"For example, if you are seeing this message, that indicates a kernel panic.
If so, see my "Resolving Kernel Panics" FAQ. This FAQ includes step-by-step instructions for identifying and resolving some of the most common causes of kernel panics. The FAQ is a roadmap: start at the beginning and work systematically through the end, i.e. the "If all else fails..." section.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X
Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
I may receive some form of compensation, financial or otherwise, from my recommendation or link.

Similar Messages

ITunes crashes when I connect my iPod to the PC when iTunes is running....

I have written about this problem before, but there have not been any successful solutions as of this date. I will explain my situation a little further and maybe someone can help.
Most of the time, when I connect my iPod to my pc while iTunes is running, the instance the iPod shows up on the library site, and whenever I move the cursor, iTunes crashes, so I have to close iTunes right away and try to disconnect my iPod. Most of the time, a message comes up that says info is being transferred to the ipod and that I shouldn't disconnet it at that time, but I usually go ahead because I know it isn't transferring at that time, since itunes has crashed.
Sometimes, after I have clicked on the first message to go ahead and disconnect my ipod, another messages comes up that says something to the effect of, "You can't disconnect because it is being used by another server at this time." So I click "OK" and then iTunes stays on for a few moments which gives me time to transfer a song or two, but then itunes crashes as soon as it finished transferring or before it finishes.
As anyone can imagine, this has really become a hugh problem. Having an iPod and not being able to use iTunes makes it very unhandy. I'm not able to add any new music or any of the playlists which i have been working on. Does anyone have a solution, or any suggestions as to what may be going on? It would be deeply appreciated.
I plan to restore my iPod in a day or two if I don't get a solution to this, but I don't have all of the music, videos, etc. that I have on the iPod since I removed much of it from iTunes to help the computer run faster. I had over 2000 items in the library, so it was pulling the pc down and it was taking forever to use the computer.
I am unable to use any of the software to transfer everything from my iPod to the iTunes library because of the problem with iTunes crashing when I connect the iPod, so this isn't a solution at this time.
Someone, please help!
HP Windows XP Using DSL for internet access

I suspect a hardware problem. But do the following to rule out a software problem:
- Reset. Nothing will be lost.
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Restore the iPod from backup via iTunes
- Resore the iPid to factoery defaults/new iPod.
In the latter part of you post, I thin you ar sayng that you do not have a syning computer and the music is not on the computer. If so, do the following so you will not lose anthing (or very little) when you restore.
- Transfer iTunes purchases to the computer:
iTunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer
- Transfer other music by using a third-party program like one of those discussed here:
Best iPod to PC
- Connect the iPod to the computer and right click on the iPod under Devices in iTunes and select Backup. This will make a backup so you can restore to the backup

ITunes 7.0.2 crashes when I connect my iPod Nano

iTunes 7.0.2 crashes when I connect my iPod Nano. What can I do about this?
Thank you!

Try here. http://www.ehow.com/how_4882455_repair-corrupted-ipods.html
http://support.apple.com/kb/TS1405?viewlocale=en_US

My itunes is crashing when i connect my ipod

my itunes is crashing when i connect my ipod

Try the suggestions here > iTunes Freezes when ipod is connected: Apple Support Communities
Bonjour may be causing the problem.

Skype Desktop crashes when it connects to the Inte...

Recently my Skype has updated to the newest version and since then it has crashed each time it connects to the internet. I have gone through other questions on this site and none that I have found have helped me.
As far as I am aware my Internet Explorer works fine, my drivers are up to date, my windows system is english and I have downloaded all optional and required system files. However, the only thing I have noticed is when I tried to visit https://apps.skype.com/home/ with IE I get the skype loading icon and the page never loads fully (But doesn't crash), not sure if that is relevent.
Skype for windows 8.1 works fine but the desktop version crashes. I have checked that I have allowed the program through my firewall and disabled and re-enabled .NET Framework 3.5 (Includes .Net 2.0 and 3.0) and run skype with it on and with it off and also ran programs to fix problems with the NET framework if it encountered any. Skype is still crashing when it connects to the internet.
I have also run Directx diagnostics tool and will attach the saved file.
Thank you for taking the time to read this and for any help you can provide
Solved!
Go to Solution.
Attachments:
DxDiag.zip ‏13 KB

Note: this is not an issue particular to FaceRig, there are quite a few other programs using virtual cams that are affected by the 7.0 upgrade in the same manner. There is however a potential solution.
We have talked with some of our users affected by this issue (this does not affect everyone doing the 7.0 update, just some) and we trust that we have found the solution (at least until we've had time to investigate some more).
Seems the problem to has to do with the default webcam settings (you just need to go though the Skype initial setup again).. The short version of the fix is:
1. Go to Steam Client and do a "remove local application data" on FaceRig
2. Go though the initial setup process on Skype ( now it won't crash) and/or visit the webcam setting menu and make sure everything is working and everything is updated.
3. Re-install facerig (skip reinstalling the open codecs if you already have them installed)
Now everything should be working.
I recommend reading the detailed step by step on the FaceRig Steam support forums:
http://steamcommunity.com/app/274920/discussions/ ( look for the Skype 7.0.0.102 pinned thread - i cqannot link directly that thread because there is a limit on the length of URL's here.)
PS: if you are the tinkering type, steps 1 and 3 can be simply substituted by un-registering and then re-registering the direct show filters ( all of them) for the FaceRig Virtual Cam ( .bat files are provided with facerig to do exactly just that) , but most folks do not want to mess with directly registering/unregistering DirectShow filters, so it is simpler to ask for an uninstall and a re-install.
Note that this kind of fix might also work for FFsplit.ax or other affected DirectShow filters too ( as this issue is not particular to FaceRig alone, more programs are affected by this update).

My new HP officejet pro 6830 crashes when I connect to my Asus RT-N66U router

OfficeJet Pro 6830 crashes when connected to network (Asus RT-N66U router)
I've just taken delivery of an OfficeJet Pro 6830. I've installed the ink cartridges and it seems to be able to print copies and test pages, but I can't get it to connect to my network. Here's what I've tried:
Using the Wireless Setup Wizard
I selected my network from the list and entered my WPA key. It says it's trying to connect, then the following happens:
1. Briefly (for less than a second) a screen pops up showing that it has successfully connected to the network.
2. Briefly (for less than a second) the screen flashes blue with a "power" icon and the text "B8B2A4F8" (which I presume is an error code).
3. The screen display changes to "Printer Error: There is a problem with the printer. Turn the printer Off, then On."
4. After restarting the printer, it complains that it has not been shut down properly.
Any further attempts to connect yield the same results.
Ethernet connection
If I power the printer on while it is connected via an Ethernet cable to my network, after about 10 seconds it crashes as described above (steps 2 and 3) without me doing anything at all.
I did manage to get it to connect to a WiFi hotspot on my mobile phone (and I checked for firmware updates, but unfortunately there were none available), so it seems there's something about my network that the printer doesn't like. I have no idea what that could be, however. Does anyone have any ideas?

Hello Shawnondrums,
Welcome to the HP Forums.
I see that you are having an issue with the printer shutting down when attempting to connect to the wireless network.
A very important step that gets easily over looked is, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
Once the printer is back on, please use the on/off button to do a proper shut down and restart. This will also do a semi power reset on the printer.
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

My Computer crashes when i connect my Ipod. (Stop error, Blue Screen)

For the past 3 weeks, my computer has been crashing regularly-- and it's due to the iPod. When i connect my ipod, iTunes starts up and as soon as it starts to Sync, it "blue screen crashes (see message below). When i run iTunes w/o the iPod connected, no issues and i can also use my iPod no issues:
The Message i get is below: ..its a Stop error:
* STOP 0x0000008e (0xc0000005, 0xBFA6FCBA, 0xA9F5130C, 0x00000000)
* Ati3duag.dll -- Address BFA6FCBA Base at BFA1C000 DateStamp 3eade1b1
Please help me!!
Gateway Laptop Windows XP Pro

i am having the same problem, but cant even get on my pc now with out using a system recovery disc! im really stuck and hope someone knows of a way of sorting this as i have only had it 2 weeks!! many thanks

Why does my macbook pro crash when I connect my external hard drive?

When I connect my external hard drive to my macbook pro (with fire wire) it crashes my computer... Any thoughts or help??

Thanks for the response. I tried both methods with the same end result.
I'm in safe mode now. It doesnt show up as being plugged in. It worked fine when connected with the USB-I went to disk utilities and repaired the disk.
I tried to plug in with the firewire, again and it shut down my computer..
Any other suggestions?

ITunes Crashes When I Connect My iPhone 5S ???

When I launch iTunes it works fine, but when I connect my iPhone to iTunes suddenly it freezes and crashes saying "iTunes has stopped working". This is causing alot of problems. I have tried the following threads for help but nothing seems to work:
iTunes: May become unresponsive when connecting iPhone, iPad, or iPod touch
http://support.apple.com/kb/TS3219
Im hoping there is someone who has had this problem and has overcome it and can help me out with what should be done ??
Thanks

<Reply to above poster Edited By Host>
The best thing I've found is to close itunes first and then disconnect your iphone. This seems to work for me with both version 7.3 and 7.3.1. Hope this helps.

Crash when I connect my LCD TV

Hi, I'm using a VGA adapter to connect my MacBook to a Thomson LCD TV. Sometimes when I plugin the cable in my laptop the system freezes and I have to manually reboot it. I'm using Mac Os X 10.5.7 (but I had the same problem with other releases) and the firmware of the adapter is already updated. Do you know if there is something I can do about it?

Hi,
+1 : same problem
Screen : NEC LCD22WV
Context : plug mini-displayport to VGA adapter (I always plug LCD VGA cable to the adapter, and then adapter to my macbook)
System log during system crash (seems to be graphic crash only):
Sep 15 14:13:02 x kernel[0]: PM notification cancel (pid 1936, Safari)
Sep 15 14:13:02 x kernel[0]: IOPMrootDomain: idle cancel
Sep 15 14:13:03 x kernel[0]: PM notification cancel (pid 1936, Safari)
Sep 15 14:13:03 x kernel[0]: IOPMrootDomain: idle cancel
Sep 15 14:21:42 x com.apple.usbmuxd[15]: MuxClearPipeStall Can't clear pipe stall 1. Error: 0xe00002ed
And then the normal reboot messages :
Sep 15 14:23:59 localhost com.apple.launchctl.System[2]: fsck_hfs: Volume is journaled. No checking performed.
Sep 15 14:23:59 localhost com.apple.launchctl.System[2]: fsck_hfs: Use the -f option to force checking.
Sep 15 14:24:01 localhost com.apple.launchctl.System[2]: launchctl: Please convert the following to launchd: /etc/mach_init.d/chum.plist
Sep 15 14:24:01 localhost com.apple.launchctl.System[2]: launchctl: Please convert the following to launchd: /etc/mach_init.d/dashboardadvisoryd.plist
Sep 15 14:24:01 localhost com.apple.launchctl.System[2]: launchctl: Please convert the following to launchd: /etc/mach_init.d/pilotfish.plist
This problem seems to be very common.
No surprising : many users use mini display port, at work or at home, in order to use a large LCD screen.
Last message is from one month now : is there any news, reporter bug number, or (I'm optimistic) a solution ?
Thanks to any people replying.
And
Thanks to Apple to fix it very soon, as it's not acceptable to crash when you only plug a LCD display ...
Linumac

App crashes when not connected to wifi

Our dps app crashes on iphone and ipad(3) when not connected to wifi. I would expect a "you are not connected to the internet" error to appear, and then any previously downloaded issues to work, except for external links. Is this possible?
Thanks!

There was a hotfix for this put out just after V25.
Unfortunetly you have to rebuild your viewer and submit and update to Apple. From my experience they were very quick about approving the update because of the critical nature of the update even without putting in an expediated review request, but that was over a month ago.

MacBook Crashing when Camcorder connected...

Bought the Insignia 720p HD camcorder from Best Buy. Read that plenty of people have used it with their Macs, albeit they had to download alternative movie editing software etc...
The problem is: When I connect it via USB 2.0 to my MacBook the MacBook crashes. It pops up with a bulletin that states I need to hold down the power button or hit the restart key to reboot my Mac. When I unplug the camcorder and restart, no problems. When I try to restart with the camcorder still plugged in, it states the same every time until I unplug it.
Driver Problem? Other issue? Any ideas? Obviously some people are using this with a Mac so I don't understand the issue...

Interval Since Last Panic Report: -1 sec
Panics Since Last Report: 1
Anonymous UUID: BE7BAD0C-7B16-47D6-B556-A3B93DBB028D
Sun Aug 2 14:08:48 2009
panic(cpu 0 caller 0x003EF40C): "IOUSBDevice::_RESERVEDIOUSBDevice8 called\n"@/SourceCache/xnu/xnu-1228.12.14/libkern/c++/OSMetaClass.cpp:817
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
0x77c93a58 : 0x12b4c6 (0x45ec20 0x77c93a8c 0x13355c 0x0)
0x77c93aa8 : 0x3ef40c (0x4a14ec 0x610280 0x610280 0x8)
0x77c93ac8 : 0x6014d4 (0x618118 0x8 0x77c93af8 0x3f0931)
0x77c93ae8 : 0x5af40b66 (0x788de00 0x77c93b0c 0x77c93b18 0x3f3efb)
0x77c93b18 : 0x5af419ce (0x773b200 0x5af46bb4 0x67a40a0 0x0)
0x77c93b78 : 0x416428 (0x773b200 0x7875a00 0x1 0x3f0838)
0x77c93bd8 : 0x417ccb (0x7875a00 0x773b200 0x78a2620 0x1225a7e0)
0x77c93c58 : 0x41752f (0x7875a00 0x6d3ec80 0x0 0x1)
0x77c93ca8 : 0x418238 (0x7875a00 0x2 0x0 0x0)
0x77c93ce8 : 0x411fda (0x7875a00 0x2 0x0 0x7875a00)
0x77c93d28 : 0x5ffc75 (0x7875a00 0x2 0x4 0x0)
0x77c93da8 : 0x97de3c (0x788de00 0x122d8f80 0x1 0x1)
0x77c93dc8 : 0x97d886 (0x122d8f80 0x1 0x1 0x0)
0x77c93e18 : 0x97d3f5 (0x122d8f80 0x618118 0x6733d80 0x10001)
0x77c93e48 : 0x416428 (0x122d8f80 0x788de00 0x1 0x3f0838)
0x77c93ea8 : 0x417ccb (0x788de00 0x122d8f80 0x786cfe0 0x78b13a0)
Backtrace continues...
Kernel loadable modules in backtrace (with dependencies):
com.apple.iokit.IOUSBMassStorageClass(2.0.6)@0x5af3f000->0x5af48fff
dependency: com.apple.iokit.IOSCSIArchitectureModelFamily(2.0.9)@0x818000
dependency: com.apple.iokit.IOUSBFamily(3.1.5)@0x5f1000
dependency: com.apple.iokit.IOStorageFamily(1.5.6)@0x831000
com.apple.driver.AppleUSBComposite(3.0.0)@0x97c000->0x97ffff
dependency: com.apple.iokit.IOUSBFamily(3.1.5)@0x5f1000
com.apple.iokit.IOUSBFamily(3.1.5)@0x5f1000->0x618fff
BSD process name corresponding to current thread: kernel_task
Mac OS version:
9J61
Kernel version:
Darwin Kernel Version 9.7.0: Tue Mar 31 22:52:17 PDT 2009; root:xnu-1228.12.14~1/RELEASE_I386
System model name: MacBook3,1 (Mac-F22788C8)
System uptime in nanoseconds: 1387872772122
unloaded kexts:
com.apple.driver.InternalModemSupport 2.4.0 - last unloaded 171297126583
loaded kexts:
com.intego.iokit.VirusBarrierService 10.5.8
com.intego.kext.AppBarrierKPI 2.1
com.intego.kext.NetBarrierKPI 10.5.2
com.apple.iokit.IOUSBMassStorageClass 2.0.6 - last loaded 1387736008957
com.apple.driver.IOBluetoothSCOAudioDriver 2.1.6f8
com.apple.iokit.IOBluetoothSerialManager 2.1.6f8
com.apple.filesystems.autofs 2.0.2
com.apple.driver.AppleHWSensor 1.9d0
com.apple.driver.AppleHDA 1.6.8a3
com.apple.driver.AppleUpstreamUserClient 2.7.5
com.apple.DontSteal_Mac_OSX 6.0.3
com.apple.iokit.CHUDUtils 201
com.apple.iokit.CHUDProf 211
com.apple.driver.AppleIntelGMAX3100 5.4.4
com.apple.driver.AppleIntelGMAX3100FB 5.4.4
com.apple.driver.ACPISMCPlatformPlugin 3.4.0d10
com.apple.driver.AppleHDAController 1.6.8a3
com.apple.driver.SMCMotionSensor 2.1.1d2
com.apple.driver.AppleIRController 110
com.apple.iokit.IOFireWireIP 1.7.7
com.apple.driver.AudioIPCDriver 1.0.6
com.apple.driver.AppleLPC 1.2.12
com.apple.driver.AppleBacklight 1.6.0
com.apple.driver.CSRUSBBluetoothHCIController 2.1.6f8
com.apple.driver.AppleUSBMergeNub 3.0.7
com.apple.driver.AppleUSBTrackpad 1.7.4f1
com.apple.driver.AppleUSBTCKeyEventDriver 1.7.4f1
com.apple.driver.AppleUSBTCKeyboard 1.7.4f1
com.apple.driver.AppleUSBComposite 3.0.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.0.9
com.apple.iokit.SCSITaskUserClient 2.0.9
com.apple.driver.XsanFilter 2.7.91
com.apple.iokit.IOATAPIProtocolTransport 1.5.2
com.apple.driver.AirPortBrcm43xx 363.35.0
com.apple.iokit.IOAHCIBlockStorage 1.2.1
com.apple.driver.AppleUSBHub 3.1.5
com.apple.iokit.IOUSBUserClient 3.0.7
com.apple.driver.AppleFWOHCI 3.8.2
com.apple.driver.AppleAHCIPort 1.6.0
com.apple.driver.AppleIntelPIIXATA 2.0.0
com.apple.iokit.AppleYukon2 3.1.12b14
com.apple.driver.AppleUSBEHCI 3.1.5
com.apple.driver.AppleUSBUHCI 3.1.5
com.apple.driver.AppleEFINVRAM 1.2.0
com.apple.driver.AppleSmartBatteryManager 158.10.0
com.apple.driver.AppleRTC 1.2.3
com.apple.driver.AppleHPET 1.4
com.apple.driver.AppleACPIPCI 1.2.4
com.apple.driver.AppleACPIButtons 1.2.4
com.apple.driver.AppleSMBIOS 1.4
com.apple.driver.AppleACPIEC 1.2.4
com.apple.driver.AppleAPIC 1.4
com.apple.security.seatbelt 107.12
com.apple.nke.applicationfirewall 1.6.77
com.apple.security.TMSafetyNet 3
com.apple.driver.AppleIntelCPUPowerManagement 76.0.0
com.apple.driver.DiskImages 199
com.apple.BootCache 30.4
com.apple.iokit.IOSerialFamily 9.4
com.apple.driver.DspFuncLib 1.6.8a3
com.apple.iokit.CHUDKernLib 201
com.apple.driver.IOPlatformPluginFamily 3.4.0d10
com.apple.iokit.IOHDAFamily 1.6.8a3
com.apple.iokit.IOAudioFamily 1.6.9fc3
com.apple.kext.OSvKernDSPLib 1.1
com.apple.driver.AppleSMC 2.2.1d2
com.apple.iokit.IONDRVSupport 1.7.3
com.apple.iokit.IOGraphicsFamily 1.7.3
com.apple.driver.AppleUSBBluetoothHCIController 2.1.6f8
com.apple.iokit.IOBluetoothFamily 2.1.6f8
com.apple.iokit.IOUSBHIDDriver 3.1.0
com.apple.iokit.IOSCSIBlockCommandsDevice 2.0.9
com.apple.iokit.IOBDStorageFamily 1.5
com.apple.iokit.IODVDStorageFamily 1.5
com.apple.iokit.IOCDStorageFamily 1.5
com.apple.iokit.IOSCSIArchitectureModelFamily 2.0.9
com.apple.iokit.IO80211Family 216.1
com.apple.iokit.IOFireWireFamily 3.4.7
com.apple.iokit.IOAHCIFamily 1.5.0
com.apple.iokit.IOATAFamily 2.0.1
com.apple.iokit.IONetworkingFamily 1.6.1
com.apple.iokit.IOUSBFamily 3.1.5
com.apple.driver.AppleEFIRuntime 1.2.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.iokit.IOStorageFamily 1.5.6
com.apple.iokit.IOHIDFamily 1.5.5
com.apple.driver.AppleACPIPlatform 1.2.4
com.apple.iokit.IOACPIFamily 1.2.0
com.apple.iokit.IOPCIFamily 2.6

My computer crashes when I connect my iPod via usb

I have a number of iPods. 120GB iPod classic is my main one. Have used it on the same Windows XP for a number of years. I sync on average 1-2 times a week. All of a sudden when I connect via USB the computer crashes. Same thing happens with my other iPods. Tried different USB ports. Same thing. Have tried other USB devices, no problem.
Have upgraded to latest version of iTunes. Same problem.
It appears the issue is with the Apple USB driver....? Just wondering if someone has seen this problem and has a work around for it.

Hi there bippycrisps,
You may find the troubleshooting steps in the article below helpful.
iPhone, iPad, or iPod touch: Windows displays a blue screen message or restarts when connecting your device
http://support.apple.com/kb/TS1502
-Griff W.

Itunes crashes when I connect my iphone. Please Help I'm on my forth phone

I'm using a PC and I also updated to the newest itunes 7.3.1.
My problem is that when I connect my iphone to my PC itunes freezes and so does safari on my PC.
Is their a tread about this if so may you guys point me in the right derection.

<Reply to above poster Edited By Host>
The best thing I've found is to close itunes first and then disconnect your iphone. This seems to work for me with both version 7.3 and 7.3.1. Hope this helps.

My iTunes crashes when I connect my iPod classic.

I tried reseting my computer, reseting my iPod and even connecting my iPod to another computer. Even in another computer when I connect it, iTunes freezes.
Is my iPod dead?
I can still listen to the playlist in it. It's still working, in it's own way.
I can't even restore my iPod because of the iTunes freezing.
Please help me

Hello Elif B.,
Thanks for the question, and welcome to Apple Support Communities.
The following article provides troubleshooting steps for the issue you described. Because you mentioned the issue persists on another computer, you may want to refer to that section:
iTunes: May become unresponsive when connecting iPhone, iPad, or iPod touch
http://support.apple.com/kb/TS3219
If the issue also occurs on a different computer:
You may need to restore your device to factory settings.
- If your device has an internet connection, you may use email to send yourself your pictures, notes, and other data you may need to back up before you restore.
- If you have backed up your device in the past, and you wish to keep this backup, make a copy of your backup on your computer. See this article for details on where backups are stored.
- Follow this article to restore your device. When the restore is finished, restore from your latest backup.
- If the issue returns, follow steps this article again, but restore your device "As new" when prompted.
Thanks,
Matt M.

Crashing when re connecting to Broadband

Similar Messages

Maybe you are looking for