Crawl Error GetVirtualServerPolicyInternal - An item with the same key has already been added

Hi,
I did an index reset and now I can't start any crawl. It's complaining "An item with the same key has already been added".  Exception seems to from Microsoft.Office.Server.Search.Internal.Protocols.SharePoint2006.CSTS3Helper.GetVirtualServerPolicyInternal. 
What should I check? Thanks.
The SharePoint item being crawled returned an error when requesting data from the web service. ( Error from SharePoint site: *** An item with the same key has already been added., CorrelationID: 9e69ff9c-f925-50bf-5110-d1b0e74c77bc; SearchID = 522CB441-0028-4E7D-BED4-4230D7ADD14B
04/22/2015 19:37:10.93  mssdmn.exe (0x1A34)                      0x225C SharePoint Server Search       Connectors:SharePoint        
 dm1k Medium   Exception Type: System.ArgumentException *** Message : An item with the same key has already been added. *** StackTrace:    at System.Collections.Generic.Dictionary`2.Insert(TKey key, TValue value, Boolean
add)     at Microsoft.Office.Server.Search.Internal.Protocols.SharePoint2006.CSTS3Helper.GetVirtualServerPolicyInternal(String strStsUrl, WssVersions serverVersion, sPolicyUser[]& vUsers, sPolicyUser& anonymousUser, String&
strVersion, String[]& vServerWFEs, Boolean& fIsHostHeader, Boolean& fIsAllUsersNT, Boolean& fIncludeSiteIdInCompactURL)     at Microsoft.Office.Server.Search.Internal.Protocols.SharePoint2006.CSTS3Helper.GetVirtualServerPolicy(String
strStsUrl, sPolicyUser[]& vUsers, sPolicyUser& anonymousUser, String& strVersion, String[]& vServerWFEs, Boolean& fIsHostHeader, Boolean... 7a91de3b-a271-43c3-9f1a-935558902623
04/22/2015 19:37:10.93* mssdmn.exe (0x1A34)                      0x225C SharePoint Server Search       Connectors:SharePoint        
 dm1k Medium   ...& fIsAllUsersNT, Boolean& fIncludeSiteIdInCompactURL) 7a91de3b-a271-43c3-9f1a-935558902623
04/22/2015 19:37:10.93  mssdmn.exe (0x1A34)                      0x225C SharePoint Server Search       Connectors:SharePoint        
 fsa0 Monitorable GetVirtualServerPolicy fail. error 2147755542, strStsUrl
http://serverurl 7a91de3b-a271-43c3-9f1a-935558902623
04/22/2015 19:37:10.93  mssdmn.exe (0x1A34)                      0x225C SharePoint Server Search       Connectors:SharePoint        
 dvt6 High     SetSTSErrorInfo ErrorMessage = Error from SharePoint site: *** An item with the same key has already been added., CorrelationID: ae5aff9c-2940-50bf-5110-da6764f258d7 hr = 80042616  [sts3util.cxx:6988] 
search\native\gather\protocols\sts3\sts3util.cxx 7a91de3b-a271-43c3-9f1a-935558902623
04/22/2015 19:37:10.93  mssdmn.exe (0x1A34)                      0x225C SharePoint Server Search       Connectors:SharePoint        
 dvi3 High     Couldn't retrieve server
http://serverurl policy, hr = 80042616  [sts3util.cxx:1865]  search\native\gather\protocols\sts3\sts3util.cxx 7a91de3b-a271-43c3-9f1a-935558902623
04/22/2015 19:37:10.93  mssdmn.exe (0x1A34)                      0x225C SharePoint Server Search       Connectors:SharePoint        
 dvu0 High     STS3::StoreCachedError: Object initialization failed.  Message:  "Error from SharePoint site: *** An item with the same key has already been added., CorrelationID: ae5aff9c-2940-50bf-5110-da6764f258d7"
HR: 80042616  [sts3util.cxx:7083]  search\native\gather\protocols\sts3\sts3util.cxx 7a91de3b-a271-43c3-9f1a-935558902623
04/22/2015 19:37:10.93  mssdmn.exe (0x1A34)                      0x225C SharePoint Server Search       Connectors:SharePoint        
 dvg4 High     Server serverurl security initialization failed, hr = 80042616 error Message Error from SharePoint site: *** An item with the same key has already been added., CorrelationID: ae5aff9c-2940-50bf-5110-da6764f258d7 
[sts3util.cxx:1591]  search\native\gather\protocols\sts3\sts3util.cxx 7a91de3b-a271-43c3-9f1a-935558902623
04/22/2015 19:37:10.93  mssdmn.exe (0x1A34)                      0x225C SharePoint Server Search       Connectors:SharePoint        
 dv5x High     CSTS3Accessor::InitServer: Initialize STS Helper failed. Return error to caller, hr=80042616  [sts3acc.cxx:1932]  search\native\gather\protocols\sts3\sts3acc.cxx 7a91de3b-a271-43c3-9f1a-935558902623
04/22/2015 19:37:10.93  mssdmn.exe (0x1A34)                      0x225C SharePoint Server Search       Connectors:SharePoint        
 dv3t High     CSTS3Accessor::InitURLType fails, Url
http://serverurl, hr=80042616  [sts3acc.cxx:288]  search\native\gather\protocols\sts3\sts3acc.cxx 7a91de3b-a271-43c3-9f1a-935558902623
04/22/2015 19:37:10.93  mssdmn.exe (0x1A34)                      0x225C SharePoint Server Search       Connectors:SharePoint        
 dvb1 Medium   CSTS3Accessor::Init fails, Url
http://serverurl, hr=80042616  [sts3handler.cxx:337]  search\native\gather\protocols\sts3\sts3handler.cxx 7a91de3b-a271-43c3-9f1a-935558902623
04/22/2015 19:37:10.93  mssdmn.exe (0x1A34)                      0x225C SharePoint Server Search       Connectors:SharePoint        
 dvb2 Medium   CSTS3Handler::CreateAccessorExD: Return error to caller, hr=80042616            [sts3handler.cxx:355]  search\native\gather\protocols\sts3\sts3handler.cxx 7a91de3b-a271-43c3-9f1a-935558902623
04/22/2015 19:37:10.93  mssdmn.exe (0x1A34)                      0x225C SharePoint Server Search       Crawler:FilterDaemon         
 e4ye High     FLTRDMN: URL
http://serverurl Errorinfo is "Error from SharePoint site: *** An item with the same key has already been added., CorrelationID: ae5aff9c-2940-50bf-5110-da6764f258d7"  [fltrsink.cxx:566]  search\native\mssdmn\fltrsink.cxx 
04/22/2015 19:37:10.93  mssearch.exe (0x1118)                    0x0628 SharePoint Server Search       Crawler:Gatherer Plugin      
 cd11 Warning  The start address http://serverurl cannot be crawled.  Context: Application 'Enterprise_Search_Service_Application', Catalog 'Portal_Content'  Details:  The SharePoint item being
crawled returned an error when requesting data from the web service.   (0x80042616) 
04/22/2015 19:37:10.99  NodeRunnerContent1-84b5adb7-0d6 (0x2090) 0x06B4 Search                         Fuzzy Name Search            
 ajyfa Unexpected CCANameProjector : Exception:Exception : Access to the path 'C:\Program Files\Microsoft Office Servers\15.0\Data\Office Server\CanonicalResources\ProjectionModels\EN_EN.mdl' is denied. encountered while attempting to 
load the Projection Model Catalog C:\Program Files\Microsoft Office Servers\15.0\Data\Office Server\CanonicalResources\ProjectionModels\EN_EN.mdl for Language : en encountered while attempting to load the projection model. ab403221-f69c-43ef-a8cc-7df384f6a4b3
04/22/2015 19:37:10.99  NodeRunnerContent1-84b5adb7-0d6 (0x2090) 0x06B4 Search                         Fuzzy Name Search            
 ajyd9 Unexpected CCAMetadataProducer : Fuzzy metadata generation failed to load resource for language: en. ab403221-f69c-43ef-a8cc-7df384f6a4b3
04/22/2015 19:37:10.99  NodeRunnerContent1-84b5adb7-0d6 (0x2090) 0x06B4 Search                         Fuzzy Name Search            
 ajyed Monitorable CCAMetadataProducer : Fuzzy metadata generation failed for the current record. Check logs for more details. ab403221-f69c-43ef-a8cc-7df384f6a4b3
04/22/2015 19:37:11.00  NodeRunnerContent1-84b5adb7-0d6 (0x2090) 0x240C Search                         Fuzzy Name Search            
 ajyfa Unexpected CCANameProjector : Exception:Exception : Access to the path 'C:\Program Files\Microsoft Office Servers\15.0\Data\Office Server\CanonicalResources\ProjectionModels\EN_EN.mdl' is denied. encountered while attempting to 
load the Projection Model Catalog C:\Program Files\Microsoft Office Servers\15.0\Data\Office Server\CanonicalResources\ProjectionModels\EN_EN.mdl for Language : en encountered while attempting to load the projection model. 2bbbeea9-aeb8-4497-a774-2927bd21ba98
04/22/2015 19:37:11.00  NodeRunnerContent1-84b5adb7-0d6 (0x2090) 0x240C Search                         Fuzzy Name Search            
 ajyd9 Unexpected CCAMetadataProducer : Fuzzy metadata generation failed to load resource for language: en. 2bbbeea9-aeb8-4497-a774-2927bd21ba98
04/22/2015 19:37:11.00  NodeRunnerContent1-84b5adb7-0d6 (0x2090) 0x240C Search                         Fuzzy Name Search            
 ajyed Monitorable CCAMetadataProducer : Fuzzy metadata generation failed for the current record. Check logs for more details. 2bbbeea9-aeb8-4497-a774-2927bd21ba98
04/22/2015 19:37:11.00  NodeRunnerContent1-84b5adb7-0d6 (0x2090) 0x10E4 Search                         Fuzzy Name Search            
 ajyfa Unexpected CCANameProjector : Exception:Exception : Access to the path 'C:\Program Files\Microsoft Office Servers\15.0\Data\Office Server\CanonicalResources\ProjectionModels\EN_EN.mdl' is denied. encountered while attempting to 
load the Projection Model Catalog C:\Program Files\Microsoft Office Servers\15.0\Data\Office Server\CanonicalResources\ProjectionModels\EN_EN.mdl for Language : en encountered while attempting to load the projection model. e15da110-f86d-4e3d-8d73-a67dccaa82cd
04/22/2015 19:37:11.00  NodeRunnerContent1-84b5adb7-0d6 (0x2090) 0x10E4 Search                         Fuzzy Name Search            
 ajyd9 Unexpected CCAMetadataProducer : Fuzzy metadata generation failed to load resource for language: en. e15da110-f86d-4e3d-8d73-a67dccaa82cd
04/22/2015 19:37:11.00  NodeRunnerContent1-84b5adb7-0d6 (0x2090) 0x10E4 Search                         Fuzzy Name Search            
 ajyed Monitorable CCAMetadataProducer : Fuzzy metadata generation failed for the current record. Check logs for more details. e15da110-f86d-4e3d-8d73-a67dccaa82cd
04/22/2015 19:37:11.03  NodeRunnerContent1-84b5adb7-0d6 (0x2090) 0x240C Search                         Fuzzy Name Search            
 ajyfa Unexpected CCANameProjector : Exception:Exception : Access to the path 'C:\Program Files\Microsoft Office Servers\15.0\Data\Office Server\CanonicalResources\ProjectionModels\EN_EN.mdl' is denied. encountered while attempting to 
load the Projection Model Catalog C:\Program Files\Microsoft Office Servers\15.0\Data\Office Server\CanonicalResources\ProjectionModels\EN_EN.mdl for Language : en encountered while attempting to load the projection model. 58d54385-497b-466d-9f02-aeba664bc1b6
04/22/2015 19:37:11.03  NodeRunnerContent1-84b5adb7-0d6 (0x2090) 0x240C Search                         Fuzzy Name Search            
 ajyd9 Unexpected CCAMetadataProducer : Fuzzy metadata generation failed to load resource for language: en. 58d54385-497b-466d-9f02-aeba664bc1b6
04/22/2015 19:37:11.03  NodeRunnerContent1-84b5adb7-0d6 (0x2090) 0x240C Search                         Fuzzy Name Search            
 ajyed Monitorable CCAMetadataProducer : Fuzzy metadata generation failed for the current record. Check logs for more details. 58d54385-497b-466d-9f02-aeba664bc1b6

Hi,
For troubleshooting your issue, please take steps as below:
1. Try to crawl your content source using farm admin account.
2.
Disable loopback check .
3.Add reference  SPS3s://WEB into your content source start addresses.
For more information, please refer to these blogs:
http://sharepoint.stackexchange.com/questions/5215/crawling-fails-with-404-error-message-but-the-iis-log-tell-a-different-story
http://www.cleverworkarounds.com/2011/07/22/troubleshooting-sharepoint-people-search-101/
http://blogs.msdn.com/b/biyengar/archive/2009/10/27/psconfig-failure-with-error-an-item-with-the-same-key-has-already-been-added.aspx
Best Regards,
Eric
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Similar Messages

  • SharePoint Search Service upgrade to 2013 fails: "Inner Exception: An item with the same key has already been added."

    Here's the situation:
    Upgrading a SharePoint Server 2010 Search Service Application dB to our SharePoint 2013 SP 1 development environment, using the Management Shell
    Running the following commands: 
    $applicationPool= Get-SPServiceApplicationPool -Identity 'SearchService_AppPool'
    $searchInst = Get-SPEnterpriseSearchServiceInstance -local
    Restore-SPEnterpriseSearchServiceApplication -Name 'SearchServiceApplication' -applicationpool $applicationPool -databasename 'SearchServiceApplicationDB' -databaseserver SERVERNAME -AdminSearchServiceInstance $searchInst
    Creates the search dBs (crawl, links, analytics) successfully; however, in the end, I get....
    "Exception: Action 15.0.107.0 of Microsoft.Office.Server.Search.Upgrade.SearchAdminDatabaseSequence failed."
    Looking at the ULS logs, I find the following:
    Inner Exception: An item with the same key has already been added.
    at System.Collections.Generic.Dictionary`2.Insert(TKey key, TValue value, Boolean add)     at Microsoft.Office.Server.Search.Administration.OOTBSchemaDefinition.FindAndFixExistingManagedProperties()     at Microsoft.Office.Server.Search.Administration.OOTBSchemaDefinition.InstallManagedProperties(Boolean
    upgrade)     at Microsoft.Office.Server.Search.Administration.OOTBSchemaDefinition.Upgrade()     at Microsoft.Office.Server.Search.Upgrade.UpdateAllOOTBProperties.Upgrade()     at Microsoft.SharePoint.Upgrade.SPActionSequence.Upgrade()
    Exception: Action 15.0.107.0 of Microsoft.Office.Server.Search.Upgrade.SearchAdminDatabaseSequence failed.
    at Microsoft.SharePoint.Upgrade.SPActionSequence.Upgrade()     at Microsoft.SharePoint.Upgrade.SPDatabaseSequence.Upgrade()     at Microsoft.Office.Server.Search.Upgrade.SearchDatabaseSequence.Upgrade()     at Microsoft.SharePoint.Upgrade.SPUpgradeSession.Upgrade(Object
    o, Boolean bRecurse)
    Anyone encounter anything like this during their search upgrade process? I'm not honestly even sure what duplicate value to look for at this point, if I were to run a SELECT Id, ClassId, ParentId, Name, Status, Version, Properties FROM Objects on
    "SharePoint_Config" in SSMS. Any insight or opinions on the matter are welcome; and thanks to those who choose to reply to this, in advance.

    Hi ,
    You can enable the ULS log on verbose level (note, remember to reset to default level after finished troubleshooting) for more information per the following article, then check there should be more useful message for helping solve the issue.
    http://www.brightworksupport.com/enabling-verbose-logging-to-compare-against-c/
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/12c99279-d3aa-46de-bc57-d5d250692ff0/upgrade-of-search-service-application-from-2010-to-2013-failure?forum=sharepointadmin
    https://www.simple-talk.com/blogs/2014/04/22/sharepoint-2010-to-2013-search-service-application-upgrade-issueaction-15-0-80-0-fails/http://blogs.msdn.com/b/biyengar/archive/2009/10/27/psconfig-failure-with-error-an-item-with-the-same-key-has-already-been-added.aspx
    Thanks,
    Daniel Yang
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] 
    Daniel Yang
    TechNet Community Support

  • Unable to load the tables in the Power Pivot Window – An Item with the Same Key has already been added

    Hi there,
    I recently had the following situation, where I changed the source of my CSV file in Power Query.
    Once I had reloaded the file, it would then not load into Power Pivot. So I disabled the loading from Power Query into Power Pivot. I then enabled the loading to the Data Model. Which then successfully loaded the data into Power Pivot.
    But once I went into Power Pivot, had a look, then saved the Excel file. Once saved I closed the Excel file. I then opened the Excel file again and all the sheets that interact with the Power Pivot data work fine.
    But if I go and open Power Pivot I get the following error: Unable to load the tables in the Power Pivot Window – An Item with the Same Key has already been added.
    This is what I get from the Call Stack
       at System.Collections.Generic.Dictionary`2.Insert(TKey key, TValue value, Boolean add)
       at Microsoft.AnalysisServices.Common.LinguisticModeling.SynonymModel.AddSynonymCollection(DataModelingColumn column, SynonymCollection synonyms)
       at Microsoft.AnalysisServices.Common.LinguisticModeling.LinguisticSchemaLoader.DeserializeSynonymModelFromSchema()
       at Microsoft.AnalysisServices.Common.SandboxEditor.LoadLinguisticDesignerState()
       at Microsoft.AnalysisServices.Common.SandboxEditor.set_Sandbox(DataModelingSandbox value)
       at Microsoft.AnalysisServices.XLHost.Modeler.ClientWindow.RefreshClientWindow(String tableName)
    I would assume that the issue is with the synonyms and for some reason, when I disabled the loading of my data into the Power Pivot Model, it did not remove the associations to the actual table and synonyms.
    If I renamed the table in Power Pivot it all works fine. So that was my work around. Fortunately I did have a copy of the Excel workbook before I made this change. So I could then go and add back in all the relevant data to my table.
    Has anyone had this before and know how to fix it?
    http://www.bidn.com/blogs/guavaq

    Hi there
    I can share the work book, if possible to send me an email address. As the workbook size is about 9Mb.
    Thanks
    Gilbert
    http://www.bidn.com/blogs/guavaq

  • When deleting messages I get this message:"74608.emlx" couldn't be copied to "Messages" because an item with the same name already exists.  How can I fix this problem?

    When trying to delete messages in mail, I've been getting this message:“74608.emlx” couldn’t be copied to “Messages” because an item with the same name already exists."  The numbers at the beginning are always different but the ".emlx" and the rest of the statement is always the same.  How can I fix this problem?
    Thanks
    Candy777

    HT2500 Error when deleting email: Apple Support Communities

  • HT5767 My mail all of a sudden would not allow me to delete messages in my inbox saying, "couldn't be copied to "Messages" because an item with the same name already exists." Found it duplicates the message I wanted deleted in trash.

    Still  using the @mac.com   mail  address and up   to date on everything, but have not gone to Maverick.  All of a sudden Mail wouldn't let me delete.  Said that title of email was already in trash.  And sure enough it was.  Clicking on the help button on the message gets Nothing.
    The selected topic is currently unavailable.
    The topic you were trying to view could not be found.
    "couldn’t be copied to “Messages” because an item with the same name already exists."
    Any ideas.  My mail is not tied to gmail etc.. just all by it's lonesome.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and  Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Error -RFC_ERROR_SYSTEM_FAILURE- There is already a line with the same key.

    Hi,
    While executing a report in BEx am faced with the error above. It ocurs when i take a drill down on Purchase order number field ( free charact). I tried by inserting this info-object into rows but still teh same error occurs and the connection with teh server is snapped.
    The said field is also an user input field and the variable does not seem to the working as data other than the input values is fetched. There is a dump in ST22 with teh following error analysis-
    You wanted to add an entry to table
    "\FUNCTION-POOL=RRK0\FORM=EMPTY_COPY_DAT_N\DATA=<L_TSX_CSKID>[2
    you declared
    with a UNIQUE KEY. However, there was already an entry with the
    same key.
    This may have been in an INSERT or MOVE statement, or within a
    SELECT ... INTO statement.
    Plz guide
    Regards,
    Saurabh Diwakar

    Hi,
    take a look at this SAP note:
    Term ITAB_DUPLICATE_KEY; SAPLRRK0; empty_copy_dat_n_01
    SAP Note Number: [966238 |https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_bex/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d393636323338%7d]
    Regards
    Andreas

  • Web Matrix FTP Remote Connection Error - "Connection Error - Failure to get file list from server. An entry with the same key already exists."

    Does anyone have experience with this issue when connecting to a Linux FTP Web Server running a FTP Site?
    "Connection Error - Failure to get file list from server. An entry with the same key already exists."
    I cannot access the root directory of the ftp file server using Web Matrix 3. The site is .php based, and
    is accessible when connecting with FileZilla or Remote Connecting via FTP with Visual Studio.
    All sites have been deleted from Web Matrix, the user Application Data has been cleared and Web Matrix has been reinstalled.
    Issue Persists....
    Thanks in advance,
    Justin

    Turns out that the program leaves metadata in your app data folder that is not removed upon uninstallation of the software.
    This is incorporated to communicate with a file that uploaded into the ftp directory when publishing pages.

  • Rounding PR00 in header level (+1 item with the same material)

    I have currently a problem, my customer prints the invoice by sumarizing the materials (line items with the same material and pr00), but by doing this the unit price by the quantity is not correct because the rouding at line item is not the same when we put all together.
    e.g.
    line 1 - qty = 7,5 and pr00 = 0,15 ->total of 1,125 -> stays in line item with 1,13
    line 2 - qty = 7,5 and pr00 = 0,15 ->total of 1,125 -> stays in line item with 1,13
    in the layout we have a total of 2,26, but in real we must have 2,25 if we see this like a header group.
    Can we have a rounding solution for the PR00? like we have for discounts using a rouding routine?
    thanks in advance,
    joao

    in the layout we have a total of 2,26, but in real we must have 2,25
    Since the issue is only in output of billing document, you have to take the help of ABAPer and modify the smart form.
    thanks
    G. Lakshmipathi

  • Record filtered in advance as error records with the same key exist

    Dear Masters
       I am getting below error for master data (0MATERIAL_ATTR), while loading data from PSA to Info object through DTP (I have set the Handle duliocate record also). When I checked that error data in Error Stack, I am getting below error for all records(100)
    "Record filtered in advance as error records with the same key exist"
    Could u please help me to resolve this issue
    Thanks in Advance
    Raja

    Hi
    Thanks for reply
    I have loaded the Delta data in PSA. In PSA data was loaded successfully. I got the failure only when I loaded the from PSA to Maste data
    Thanks in advance
    Raja

  • Query 0: Runtime error There is already a line with the same key. with para

    Dear all,
    I have a query with several variables. One of the variables is Version. When I use certain values e.g. 1,2 or 3, I can generate the query without any problem. However, when I use the other values e,g, 4, 5, or 6, the query gives me with the following error messages :
    1. Query 0: Runtime error There is already a line with the same key. with parallel processing via RFC
    2. Error while reading data; navigation is possible
    3. >> Row: 174 Inc: LRSDRPU02 Prog: SAPLRSDRP
    Error 1
    Query 0: Runtime error There is already a line with the same key. with parallel processing via RFC
    Message no. DBMAN428
    Error 2
    Error while reading data; navigation is possible
    Message no. BRAIN289
    Diagnosis
    An error occurred while reading the data. The query result is therefore empty or inconsistent and is not buffered in the OLAP cache.
    Procedure
    You can continue to navigate or return to the last navigation step.
    Error 3
    >> Row: 174 Inc: LRSDRPU02 Prog: SAPLRSDRP
    Message no. RS_EXCEPTION301
    Diagnosis
    En error has been triggered. This message specifies where in the coding the error occurred. This helps you to localize the error quickly.
    May I know what causes this error and how to troubleshoot it?
    Thank you.

    Venkat,
    You are either a genius or working for SAP.
    In any case, your solution solved my problem.
    Thanks heaps!

  • Cannot delete read mail. Keep getting the following message "926540.emlx" couldn't be copied to "Messages" because an item with the same name already exists.

    I am trying to free up room on my hard drive but keep getting the following message. “926540.emlx” couldn’t be copied to “Messages” because an item with the same name already exists. 926540.emix is the number given to the email I want to delete. This message appears (with a different .emix number) when I try to delete any mail. I have junk mail from 2014 to 2009 that I want to delete

    Back up all data. Rebuild the mailbox. Try again to delete the message.

  • "91590.emlx" couldn't be copied to "Messages" because an item with the same name already exists. How do I fix this?

    The delete button in Mail gives me this message: “91590.emlx” couldn’t be copied to “Messages” because an item with the same name already exists. The only thin that has changed is an OS update last evening. (Mountain Lion)

    Thanks...it was spooky seeing the mail in my box suddenly disappear and blank after going to Mailbox and Rebuild.  But "poof" it was up again and was able to delete without the messages telling me it had a duplicate in trash (which it did).  Solved the problem.

  • Messages could not be moved to the mailbox "Trash - "122730.emlx" couldn't be copied to "Messages" because an item with the same name already exists.

    Cannot move messages from mail to trash.  Get the following message:    messages could not be moved to the mailbox “Trash — “122730.emlx” couldn’t be copied to “Messages” because an item with the same name already exists.

    I just started having the same problem but have found no solution.

  • Run the data copy and comments copy with the same key

    I want to Run the data copy and comments copy with the same key.
    I tried to challenge in the following way, but it is an error.
    1. Add the process in the process chain [/ CPMB / COPY] process in the process chain that could be new to copy the chain [/ CPMB / COPY_COMMENTS] (see capture)
    2. Select the newly can process chain to add a package, make a change to the script as follows:
    PROMPT(RADIOBUTTON,%TARGETMODE%,"Handling of records",0,{"Copy records with match key","Copy by replacing data in same data region of Entity, Category, Time and Audit ID"},{"0","2"})
    PROMPT(RADIOBUTTON,%RUNLOGIC%,"Select whether to run default logic for stored values after copying",0,{"Yes","No"},{"1","0"})
    PROMPT(RADIOBUTTON,%CHECKLCK%,"Select whether to check work status settings when importing data.",1,{"Yes, check for work status settings before importing","No, do not check work status settings"},{"1","0"})
    PROMPT(COPYMOVEINPUT,%SELECTION%,%TOSELECTION%,"Select the members to COPY and where to",%DIMS%,0)
    INFO(%TEMPNO1%,%INCREASENO%)
    INFO(%ACTNO%,%INCREASENO%)
    INFO(%SELECTION_KEYDATE%,)
    TASK(/CPMB/COPY_COMMENTS,SELECTION,%SELECTION%)
    TASK(/CPMB/COPY_COMMENTS,TOSELECTION,%TOSELECTION%)
    TASK(/CPMB/COPY_COMMENTS,CHECKLCK,%CHECKLCK%)
    TASK(/CPMB/CM_CONVERT,OUTPUTNO,%TEMPNO1%)
    TASK(/CPMB/CM_CONVERT,ACT_FILE_NO,%ACTNO%)
    TASK(/CPMB/CM_CONVERT,SAPPSET,%APPSET%)
    TASK(/CPMB/CM_CONVERT,SAPP,%APP%)
    TASK(/CPMB/CM_CONVERT,SELECTION,%SELECTION%)
    TASK(/CPMB/CM_CONVERT,TOSELECTION,%TOSELECTION%)
    TASK(/CPMB/CM_CONVERT,KEYDATE,%SELECTION_KEYDATE%)
    TASK(/CPMB/CLEAR_SOURCE_CUBE,CHECKLCK,1)
    TASK(/CPMB/CLEAR_SOURCE_CUBE,SELECTION,%TOSELECTION%)
    TASK(/CPMB/CLEAR_SOURCE_CUBE,KEYDATE,%SELECTION_KEYDATE%)
    TASK(/CPMB/CLEAR_SOURCE_CUBE,DUMPLOADMODE,3)
    TASK(/CPMB/APPEND_LOAD,PREPROCESSMODE,0)
    TASK(/CPMB/APPEND_LOAD,TARGETMODE,0)
    TASK(/CPMB/APPEND_LOAD,INPUTNO,%TEMPNO1%)
    TASK(/CPMB/APPEND_LOAD,ACT_FILE_NO,%ACTNO%)
    TASK(/CPMB/APPEND_LOAD,RUNLOGIC,1)
    TASK(/CPMB/APPEND_LOAD,CHECKLCK,1)
    TASK(/CPMB/APPEND_LOAD,KEYDATE,%SELECTION_KEYDATE%)

    We performed similar transfer of data from one planning model to another using DM package linked to BADI. In your scenario there is additional complexity of doing lookup from DSO and should be possible.
    Also check these references for performing lookup in DSO.
    abap code to populate data from DSO
    something about SAP: How to look for DSO&amp;#8217;s tables?

  • Reducing time while Filtering Out New Records with the Same Key

    Hi Experts,
    I have an issue .. I am trying to load data into 0MATERIAL . While loading via DTP the step u201CFilter Out New Records with the Same Keyu201D   takes much time for processing . For each datapackage it is taking around 30 minutes to filter out new records with the same key .  While for other master data it hardly takes 5 minutes.
    Any pointers how to reduce the timeu2026
    Thanks in advance
    Sam

    Hello,
    No there is no need to do that change then.
    Can you tell me are you doing a full load daily to 0MATERIAL object.
    why dont you use delta.
    Also if the DTP is of type FULL, then are you deleting the previous PSA requests.
    Maybe you can ask the basis guys to check with a trace what is really happening on the DB side during this 30 mins and then maybe we can find the needed fix.
    Regards,
    Shashank

Maybe you are looking for