Crawl just stops

Need a little help
Got a Content Source that crawls a Custom Repository - the protocol handler is installed and all worked earlier on..
Now when I start a Full Crawl, it just stop after 2 min.
It's not the process (mssdmn.exe) that doing a crash - nothing to see in the event log, nor the crawl log - the crawl log just have warning, no top-level
error, errors at all
Suddenly the other day, it crawled for almost an hour and crawled over 100.000 items for then just to stop
now we're back to where it stops after 2 min - and the +100.000 items is moved to Deletes in the crawl log.
Under warnings I see this:
Item not crawled due to one of the following reasons: Preventive crawl rule; Specified content source hops/depth exceeded; URL has query string parameter; Required protocol handler not found; Preventive robots directive. ( This item was deleted because
it was excluded by a crawl rule. )
Nothing has changed on the server nor on the repository source.

Hi JmATK,
Based on the error message, it indicates that the item is excluded from the crawl rules, so I recommend to use PowerShell command to re-check if there are any crawl rules:
Get-SPEnterpriseSearchCrawlRule –SearchApplication “Search Service Application”.
Please also make sure that the default content access account has Full Read permission on the web application and disable loopback checking.(please refer to
this link).
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

Similar Messages

I can't send photos from camera roll iphone4 to a email address. It just stopped sending photos.

i can't send photos from camera roll iphone4 to a email address. It just stopped sending photos.

iPhoto Menu -> Preferences -> Accounts ->
Delete and recreate your email settings.
It's only difficult if you get all emotional over tiny things and don't stop to look for answers first. I find Macs very simple to use.

Wifi just stopped working on an iPhone 4S, iOS 8.1.3. Have reset to factory settings and restored, still no wifi.

Wifi just stopped working on an iPhone 4S, iOS 8.1.3. Have reset to factory settings and restored, still no wifi. Will next release of iOS address this problem?

Hey there kevin8!
I have an article for you that can help you continue to troubleshoot this issue with the Wi-Fi on your iPhone. The article can be found right here:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Hopefully that will help resolve your issue. Thanks for using the Apple Support Communities!
Cheers,
Braden

My apps won't download to my iPad but will to my phone. When I put it my password, it just stops and won't do anything else????

My apps won't download to my iPad but will to my phone. When I put it my password, it just stops and won't do anything else????

Unless you have a copy of the iPod backup file from the previous computer installation you are out of luck. If yo have that file move it to your computer and restore the iPod from that backup. Otherwise, you will have to restore the iPod to factoery defaults/new iPod and lose all your app date. That is the way it is since the iPod sees the computer as a new computer/iTunes library. That backup file is located:
Mac: ~/Library/Application Support/MobileSync/Backup/
Windows XP: \Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
Windows Vista and Windows 7: \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\

I have itunee 11 and iphone 4 and i can't sync my apps to the iphone. it just stops on "determining apps to sync".please help

i have itunee 11 and iphone 4 and i can't sync my apps to the iphone. it just stops on "determining apps to sync".please help

it is an itouch, i buy apps from the app store, they are purchased, they show up in my app section but when i try to sync them to my itouch they do not show up in on the itouch. i have tried to atuthorize and deauthorize the computer also few times, rebooted computer and still nothing. when i restore the firmware and have everything reinstall all over again the apps music and such, all show up. however if i buy a new app and try to sync it with the itouch it does not show up despite the fact that the computer states 'installing "......" whatever app. it happens with numerous apps, there is no rhyme and reason to why certain apps just do not show up on the itouch. the authorize/deauthorize deal does nothing to rectify the situtaion. any other ideas ?

Microsoft Office 2004 (Word) unable to save files I have been running Office 2004 on my Intel iMac with Snow Leopard for some time and all of a sudden I cannot save a document. Word just stopped responding and I have to force quit. I can open Word and cr

Microsoft Office 2004 (Word) unable to save files
I have been running Office 2004 on my Intel iMac with Snow Leopard for some time and all of a sudden I cannot save a document. Word just stopped responding and I have to force quit. I can open Word and create a new document but I cannot save it. I reinstalled Word but that didn’t help. Then went to the Internet and found at least one other Mac user having the same problem which it suggests is caused by a recent Mac Security Update:
http://answers.microsoft.com/en-us/mac/forum/macoffice2004-macword/word-2004-wil l-not-open-or-save-documents/b04eb870-9b0d-4f3b-bb47-b122301e36f6
So I check for a new Mac Security Update and sure enough there was one. I downloaded it and now Word seems to be working, as it should. I can both open and save files. The only problem remaining is that when I open Word I get the following error message “An unexpected error occurred while trying to load the Microsoft Framework library”. I contacted Apple but they were unable to help.
How can I get rid of this error message?

Look, I realize you might have to get your machine working, so this is how you revert back.
Restore proceedure to pre-Security Update 2012-001 v 1.0 & v 1.1
#1 Backup your personal data off the machine.
Backup files off the computer (not to TimeMachine). If you don't have a external drive, get one and connect to the USB/Firewire port and simply drag and drop copy your User folder to the external drive, it will copy all your files. It's best to have two backups of your data off the machine when trying to restore.
Disconnect all drives now to prevent any mistakes from occuring.
#2 Reinstall OS X 10.6 from disk
Get out your 10.6 install disk and make sure it's clean and polished (very soft cloth and a bit of rubbing alcohol, no scratches) If your disk is borked, you'll have to order a new one from Apple with your serial number.
Hold c boot off the 10.6 disk (wired keyboard, internal optical drive), use Disk Utility First Aid to >Repair Disk of your internal drive (do not format or erase!!), Quit DU and simply re-install 10.6.
Note: Simply reinstalling 10.6 version from disk (without erasing the drive) only replaces 10.6.8 with 10.6.x and bundled Apple programs, won't touch your files (backup anyway) or most programs, unless they installed a kext file into OS X itself. (only a few on average do this)
#3 Update to 10.6.8 without Security Update 2012-001 v1.0 or v1.1
Reboot and log in, update to 10.6.8 via Software Update, but EXCLUDE THE Security Update 2012-001 by checkinig the details and unchecking the blue check box.
#4 Reinstall any non-working third party programs
When you reboot, make sure to reinstall any programs that require kext files installed into OS X, you'll know, they won't work when you launch them or hang for some reason as they are missing the part they installed into OS X.
If for some freakish reason you get gray screen at any time when booting (possible it might occur when you reinstall older programs), hold the shift key down while booting (Safe Mode, disables kext files) and update your installed third party software so it's compatible with 10.6.8.
https://support.apple.com/kb/TS2570
That's it really.

The touch screen is not working when I am in the Music app of my iPod Touch. How do I get it to begin working? It just stopped today.

The touch screen is not working when I am in the Music app of my iPod Touch. How do I get it to begin working? It just stopped today.
Does anyone know what I can do? I am unable to switch screens, and I can not see the track that is playing. The only was I can switch between songs is to use the controls on my headphones.

Try the stamdard fixes to rule out a software problem:
- Reset. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory defaults/new iPod.

HT1414 i have the 1st iPad. Can it be updated to iOS 6.0.1? If not how to fix-when on the internet sometimes it will just stop and go to the apps screen.

i have the 1st iPad. Can it be updated to iOS 6.0.1? If not how to fix-when on the internet sometimes it will just stop and go to the apps screen.

svargaswp wrote:
i have the 1st iPad. Can it be updated to iOS 6.0.1? ...
No.
iOS 5.1.1 is the lastest for the iPad 1.
svargaswp wrote:
... how to fix-when on the internet sometimes it will just stop and go to the apps screen.
Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
Note:
Also consider Deleting any Apps you have Purchased / Downloaded but you now never use..
If necessary...
Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414

My iPhone no longer gives me audible alerts for email and text messages. Just stopped. Help.

My iPhone just stopped giving me audible notifications for email and text messages. It still rings for calls. I have checked the settings for "Sounds" and they have not changed. However, in these settings when I try to change the sound I get only the vibration and not the sample sound. Can anyone help?

Hi Midwestboy,
If your iPhone isn't being recognized by iTunes on your Windows machine, you may find the following article helpful:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Regards,
- Brenden

Hi, i have an IPod Touch 4g. One of the earphones just stops working after while,no matter how many times i replace them. What do i do?

Hi, i bought my IPod 4G about 7 months ago. After about a mont of buying them, one the earphones just stopped working which became extremely annoying..so i bought a new set of earphones and they worked well for about 5/6 months and then one of them stopped working as well. About 2 weeks ago, i bought a new set of earphones and now the right earphone of that has stopped working as well. The thing is, the earphone doesnt just stop working on my IPod, it also stops working on my laptop...and now i am very confused as to where the problem lies. I can't keep buying headphones every other week cos that is just too expensive and i dont know if the problem lies with my IPod or what! The same thing is happening to my sister's IPod as they were purchased at the same time. What do we do??

This previous discussion discusses the same if not similar problem.
https://discussions.apple.com/message/6750990#6750990

Can't open a dng or raw file in cs5, just stops working. So many problems in cs5!

I totally feel for you. Just upgraded from cs4 to cs5 and it was the biggest mistake i ever made. It will probably end my livelihood as a photographer since EVERY time i open a raw file it crashes photoshop, makes it freeze up after i have adjuted the file in camera raw then I hit open; i get a few bars then it just stops working.
Even got tech help, which helped when i was on the phone with them. The next day the problem came back even when I danced the same jig that I did when I had the guy on the phone - he had me move a raw file on to the desktop rather than take open from my hard drive, then I was able to open it, so we came to the conclusion that my drive was corrupt. I had the same information backed up on a brand new hard drive so we compared files from the each drive against the other. The files from the new drive opened successfully. Yesterday. Now Photoshop cs5 doesn't open any raw or dng files at all from anywhere so it can only be a problem with photoshop. We thought we had the problem solved but we did not. This never happened on CS4 unless i was trying to open 30 or more raw files, and even then it gave me a warning that it had no more ram, it didn't just lock up and do nothing. I'm at my wit's end. Even though there are a lot of great new things in cs5, they aren't very useful if you can't use the product to do the simplest thing.

1) Install the Photoshop 12.0.1 update
2) Install the latest ACR update.
If problems continue after that, then there probably is something wrong with your system.

I have a ipad 1. I seem to be having a lot of connectivity issues. It takes a long time to load and sometimes will not load a page at all. I seem to be having issues with streaming in that it will play a song and just stop.

I seem to be having a lot of connectivity issues my iPad. It takes a long time to load and sometimes will not load a page at all. I seem to be having issues with streaming in that it will play a song and just stop. It seems I have to turn it completely off and restart.
Anyone had these issues?

Settings > General > Reset > Reset network settings

My iphone 4 just stopped receiving or making calls. I have tried everything! Help!!!

Okay, one day a little less than a MONTH ago, my iphone 4 just stopped receiving calls(90% of the time) and making calls(50% of the time.). I panicked because my job depends on my phone to work. So, i go to apple, ATT, back to apple, back to ATT, etc. There is no end to this. And, literally, the people at ATT and Apple, keep telling me that they are probably not going to figure out a solution, and that I should just cancel my account. Now, I really don't want to do this!!!!!!!!!!!!!!!!!New iphone from apple because they thought it was a ATT problem but gave me new iphone 4 anyway, new sim about 1 minute after the new phone, new phone number. The engineers at ATT said if i relocated and told them that i was moving, it would give me a new number and reset all the routing stuff. I didn't want to do this because of losing my number with business, but had to resort to it anyway. Now I have a number from a different state, and I still have the problem!!!!!!!!! I have exhausted all my options with apple and att, and both tell me the only thing i can do is buy a prepaid phone from a different service! I need my iphone for work, and this has been going on for over a month now. I was told there was a routing issue, but the engineers opened a ticket on it, and NO solution. Then they opened a second case ticket, and still no good. They are claiming I should cancel and buy a new phone. My phone just stopped recieving calls one day. No notification of missed calls, EVER since this started happening. Voicemails go thru( only some of them) about an hour or two later, and texts are taking a bit longer than usual. I have really tried everything the engineers can think of, even getting a brand new phone! Please someone help me!!!!!!!! I am desperate!!!!!!!!!!!! This happens anywhere i go, not just in my area.

Might sound silly but is the mute switch on the left side of the phone in the correct position?

My Ipod just stopped working, the screen got black and now I can't open it. I have tried to charge it but it doens't work.

My Ipod touch 5 just stopped working. The screen got black and now I can't use it or start it.
I have tried to charge it but it doens't start and when I tried to connect it with my computer it didn't work either.
I saw that you could hold down the "home" button and the "power" button at the same time but my home button doens't work so I can't do that.
Is there any other way I can fix it or do I have to go to an apple store?

Try:
Turn on without Home/Power Button

HT4623 My Iphone 4s just stopped during the latest update and now the screen show the Apple icon and an white bar beneath. I can no longer get anything to work on the phone!! Where to from here??

My Iphone 4s just stopped during the latest update and now the screen show the Apple icon and an white bar beneath. I can no longer get anything to work on the phone!! Where to from here??

You can not merge accounts.
Apps are tied to the Apple ID used to download them, you can not transfer them.

Crawl just stops

Similar Messages

Maybe you are looking for