Crawler not indexing the documents from repository

Hi All,
I've installed TREX 6.1.09 with EP6.(version=6.0.9.0.0 and
KnowledgeManagementCollaboration 6.0.9.0.0 (NW04 SPS09) on my Windows 2003 platform.
NameServer port is configured in J2EE visual Administrator and also all lights are green in TREX Monitor in KM -> Monitoring.
Now, i created an index and assigned my newely uploaded Portal.par as a Datasource to it. One more thing, i logged into the portal as as Administrator and all this has done successfully.
But when i check in the TREX Monitor, i see both index and its associated queue are idle and also indexing of document is not taking place.
When i checked ApplicationLog it gives me the XCrawler error like below
"Error 4/25/06 7:33:03 PM XCrawlerService Failed to create crawler task index2_FileNet - com.sapportals.wcm.service.xcrawler.XCrawlerException: The SQL statement "SELECT "XCRW_TASK_INDEX" FROM "KMC_XCRW_TASKS" WHERE "XCRW_TASK_ID" = ?" contains the semantics error[s]: type check error "
Sir, i've already done all the work around given in the Discussion Forum but could not got my problem solved.
Plz. guide me where i'm wrong in configuration ASAP.
Lot of Thanks in advance

hi Mridul,
This is a quite an exception that occurs in sp9. I experienced the same exception and so does most others. The solution is to upgrade to sp14.
This has been suggested by Mr.Noufal in his weblog. Read it
An installation that kept me searching
Also the thread he refers in his blog
Re: XCrawlerException with index
So the thing you need to do is apply the patch and upgrade it straight away as it will work afterwards.
Regards,
Ganesh N
Was the answer useful to you ?
Message was edited by: Ganesh Natarajan

Similar Messages

Could not save the document to the repository for the following reason

Hi,
Some of the Scheduled reports are getting failed because of the following Error.
Could not save the document to the repository for the following reason: [repo_proxy 30] InfoStore::ObjectExport::commit - (Helpers::InfoStore::ObjectExport::commit) File Repository Server error : Failed to put the file to file server: frs://Output/a_242/027/084/5512178/aduu8vtfkntmvyv8lsnntas.wid already exists.(hr=#0x80042a4a)(Error #-2147210678 (WIS 30567)
i have searched about this but no use no information on the same.
So Pls let me know why this problem will occur and how to resolve this,I am new to this forum if any this is wrong pls let me know
Thanks in advance,

HiShwetabh Suman
Thanks a lot for immediate response,
Please go through the following
From the logs I see a difference in the execution steps as below:
[2014-03-31 10:24:15,364] [TID:13] [INFO ] [child.RunStatusTimerTask.run():17]: calling checkRunStatus
[2014-03-31 10:24:31,887] [TID:3168] [INFO ] [child.ChildImpl.request():23]: request: [GetLoad]
[2014-03-31 10:24:31,888] [TID:3168] [INFO ] [child.ChildImpl.request():25]: response: [1]
[2014-03-31 10:24:37,879] [TID:3153] [ERROR] [webi.PublishingSubsystem.run():93]: Throwable exception caught:
com.businessobjects.rebean.wi.ServerException: Could not save the document to the repository for the following reason: [repo_proxy 30] InfoStore::ObjectExport::commit
- (Helpers::InfoStore::ObjectExport::commit) File Repository Server error : Failed to put the file to file server:
frs://Output/a_165/024/084/5511333/aqew_jeqdcjcrukoadjdtk0.wid already exists.(hr=#0x80042a4a)(Error #-2147210678 (WIS 30567)
Can you please help us understand the reason why the child.runstatustimertask.run() is called in the case where we get the failure. Because upon noticing the difference in the steps of execution I see that this method is called and after that the failure is occuring.
Also, few other findings are that :
1. The error occurs from both the nodes adaptive job servers randomly.
2. The IFRS and OFRS of one of the node is not being used at all for any file transfers (though the configurations are exactly same).
Please advise and help us get rid of the said error.
Can u give any permanent solution for us

Could not save the document to the repository for the following reason: [repo_proxy 30] DocumentFacade::uploadBlob - Query execute has failed : Error occurred while attempting to reconnect to CMS : Not a valid logon token. (FWB 00003) (hr=#0x80042a70) (WI

Hi, getting Could not save the document to the repository for the following reason: [repo_proxy 30] DocumentFacade::uploadBlob - Query execute has failed : Error occurred while attempting to reconnect to CMS : Not a valid logon token. (FWB 00003) (hr=#0x80042a70) (WIS 30567) amongst lots of other errors when scheduling.
I was logged in as administrator and attempting to schedule a webi document to my self using the email option.
thanks in advance

Hi Trinath,
Could you please confirm if you could save a new report as well or not; or is it specific to scheduling.
If you are unable to save a report also then I think this is due to the path of the Input File Repository Server or its temporary directory are not pointing to the same path, and their locations are set to 2 different hard drives
BOXI3.1 Server must use the same hard drive (local or network share) for the Input File Repository Server and its temporary directory.
- Shahnawaz

Why i can not see the Document goods movements from T-CODE CO03 ?

Hello,
why i can not see the Document goods movements list use T-CODE CO03 ? I'm sure i have issueed for this production order. thanks.
xinzhou.

Hi,
Is this a problem with only one order? or with all the Orders of the same "Order Type".
If this is with only one Order, check goods movements actually done or not?
If this problem is with other Orders as well (same Order Type), then with the T.Code; OPL8.
In the 2nd Tab Page (Implemenation) - Whether the Check boxes are filled for Documented Goods Movements??
Regards,
Siva

TREX does not index all documents fro document class SOLARGNSRC

Hi all,
I've setup a connection between a TREX server (which is also used by a portal system) and Solution Manager. I've gone through the settings in SAP Note 750623 and I was able to create a index, the queue and even bypass the basic authentication in the preprocessing for document class SOLARGNSRC
According to everything I've read, this should be enough to be able to index all documents in Solution Manager and find them with Full Tex Search. But this doesn't work. From the 50.000 documents in de class (35.000 English and 15.000 German) only 6300 documents are passed to TREX. Most of them are German HTML links to help.sap.com. I can see in the trace files that the URL's to some documents in the content server are passed to TREX. I can open dthe document using the links but I cannot find the documents using the full text search which I think means that nothing was really indexed.
Questions:
1. Has anyone been able to succesfully index Solution Manager documents for full text search purposes?
2. Why are only 10% of the documents passed to TREX? Is there a specific setting for this?
3. Why does TREX use the Content Server HTTP links to index the documents and not the RFC connection?
Cheers
Marcel Rabe

Yep, all lights green
SSR maintained. DRFUZZY as Search Engine (I have not tried Verity)
Return Code? Interesting, I don't get an return code when I trigger the Index/Deindex. I just see the hourglass for about 5 minutes (when I run it in the foreground) and after that its back to the way it was. No messages. Nothing appears in the application logs as far as I can see.
The program RSTIRIDX is scheduled in the background and runs every hour minutes for about 10 seconds without an error.
TREX Version 7.00.39.00
Five languages actived, including German and English. In SKPR07 under Indexed documents I can see that 300 German and 6000 English documents have status indexed.
No proxy server. Systems sit within the same network segment
Thnx for your help. I posted a message with SAP as well as this seems strange to me.
Marcel

HT1229 My iPhoto Library (version 8.1.2) is 280GB (greater than 50% of my 500GB total storage memory on my iMac. It was too large for me to drag it to a new hard drive so the Apple geniuses did it for me. However they did not delete the Library from my

My iPhoto Library (version 8.1.2) is 280GB (greater than 50% of my 500GB total storage memory on my iMac. It was too large for me to drag it to a new hard drive so the Apple geniuses did it for me. However they did not delete the Library from my iMac (that's my responsibility). I dragged it to Trash and when it started to move I clicked over to the new hard drive to confirm it had indeed been copied. I became nervous when I didn't see among the few files on this otherwise empty new hard drive anything that resembled a 280GB Library so I cancelled the migration to trash.
How can I be sure that my iphoto has been copied and that all my "metadata" survived in tact?

the new backup drive
I thought the new drive would be your data drive to host the iPhoto library. Do you also use it for TimeMachine backups?
I am unable to search either in email as well as Finder. I AM able to search within iPhoto though, thankfully
Spotlight may still be busy rebuildig its index.
You could try to rebuild the Spotlight Index, if you do see no progress:
Spotlight: How to re-index folders or volumes
I hope, other frequent posters will drop in. I have not used iPhoto 8.x in long time.

Configuring the file server in KM and access,edit the documents from it

Hi friends,
My requirement is to configure the file server where u will have all the structured and unstructured data stored here. So users can share the documents and create, edit ,save the documents from the file server itself.
In KM what kind of file servers are there apart from the one it supports by default.
Can anybody pls provide the configuration steps regarding how to configure the file server i KM.
To configure the file server is webDAV protocol required?
Points would be assigned for the helpful answer.
Thanks in advance.
Regards
Sireesha.

Dear Sireesha,
Well KM supports mostly all the File server however we have some restrictions with Novell FS and Sharepoint Server from Microsoft. Like versions and other meta data have some issues.
Alsothough to configure a File Server you need to first create a FS repository Manager. Details can be found in the help guide:
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/e3/92322ab24e11d5993800508b6b8b11/frameset.htm">FS Repository Manager</a>
Yes WebDAV protocol is required here.
You can create WebDav RM as well.
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/4a/217fb6c33c6748a1715a161ac942cd/frameset.htm">WEBDAV</a>
The above links will help answer your queries.
Regards
Anjali

Report is not fetching the data from Aggregate..

Hi All,
I am facing the problem in aggregates..
For example when i am running the report using Tcode RSRT2, the BW report is not fetching the data from Aggregates.. instead going into the aggregate it is scanning whole cube Data....
FYI.. Checked the characteristcis is exactely matching with aggregates..
and also it is giving the message as:
<b>Characteristic 0G_CWWPTY is compressed but is not in the aggregate/query</b>
Can some body explain me about this error message.. pls let me know solution asap..
Thankyou in advance.
With regards,
Hari

Hi
Deactivate the aggregates and then rebuild the indexes and then activate the aggregates again.
GTR

I have been working on a document in Pages 4.3 and now it tells me I can not open the document unless I upgrade to Pages 5.2. When I look up Pages 5.2 the App store says "installed" nor can I find a "purchase" or "install" button.

My OS is 10.9.3.I've been working on a document in Pages 4.3. Now is says I can not open the document unless I upgrade to Pages 5.2. The Pages 5.2 page in the App store says "installed" nor can I find a "purchase" or "install" button. How do I get Pages 5.2?

If you have already updated to Pages 5.2 on your Mac, you may be trying to open the file with a previous version of Pages. If this is the case, you have two versions of Pages on your Mac & are trying to open Pages 5 documents with Pages 4. Are you launching Pages from an icon in your Dock? Installing the update does not change the Dock icons & it does not remove the older versions. Go to your Applications folder & launch the new Pages from there then right-click on the Dock icon & select Options > Keep in Dock.
Installing new versions of iWork has never replaced existing versions. This is nothing new. The only thing new is that the '09 apps are moved to an iWork '09 folder if they were purchased from the Mac App Store. If they were installed from disk they should already be in a separate folder in Applications.

Could not retrieve the document with the passed obsolete token.

Hi,
Issue is with the specific report not able to execute when the query is cancelled and getting an error when you are cancelling an already executing query.
Receiving an error message during running one of our report in the
following way:
- Run the Webi report
- Select the value for 8 prompts
- Click on cancel
- try to re-run by clicking on re-fresh and receive an error message.
The error message is the following:
"Could not retrieve the document with the passed obsolete token (Error: RWI 00323) (Error: INF)"
Till now we have made the following changes:
This might be caused by a storage token that identifies a document state, which is no longer available in the storage tokens stack.
In the webi.properties file, increased the value of storage tokens stack size.
1. Edit the webi.properties file found in the following location:
u2022 <Installed dir>\program files\businessobjects\BOenterprise115\Web services\en\dsws_webservice_boe\data\asemble\dsewsBobjJava\src\WEB-INF\classes\webi.properties.
2. Add or change the following variables:
u2022 WID_FAILOVER_SIZE (This sets the maximum number of tokens to keep in memory. It is 10 by default.)
u2022 WID_STORAGE_TOKEN_STACK_SIZE (this sets the maximum number of tokens stored on disk. It is 10 by default.)
u2022 Deleted cookies.
u2022 Add the Java Runtime Parameter value from following path:
Start - > Control Panel-> Java -> Java Applet Runtime Settings
Click on View.
Add the Java runtime Parameter value: Xmx200.
It is not a machine specific issue however it is intermittent.
Please advice.
Regards,
Pradnya Kokil

Hi Pradnya,
Following solutions might help you to resolve the issue.
Solution1:
To achieve optimum performance, the developer should limit the number of new windows that can be opened using the OpenDocument function, particularly if using it within the drill function.
If you must open a new window each time, you can increase the number of document instances available on the system by modifying parameters in the webi.properties file:
1. On the Business Objects server, navigate to the following directory:
C:\Program Files\Business Objects\Tomcat\webapps\businessobjects\enterprise115\desktoplaunch\WEB-INF\classes
2. Open the webi.properties file using a text editor.
3. Uncomment the FAILOVER_SIZE=10 line by removing the # from the beginning of the line.
4. After FAILOVER_SIZE, add the following:
STORAGE_TOKEN_STACK_SIZE=40
5. Save the file.
6. Restart the application server
Solution2:
Do not use Control Key + N or File New from Browser for invoking new instance of Browser
Avoid opening Infoview by Hyperlinks.
Alternatively, by setting logontoken.enabled property in web.xml for desktop.war, will stop users allowing using old token
Locate web.xml file in desktop.war file deployed on your application server
Locate the following string in web.xml:<param-name>logontoken.enabled</param-name>
Change the <param-value> for logontoken.enabled from true to false (forexample, <param-value>false</param-value>)
Save and close the file
Restart the web application server to apply the changes
Regards,
Sarbhjeet Kaur

E72 I can not open office documents from my email ...

I have the phone for two months and already I have two problems. For two weeks I can not open office documents from my email and I can not connect the phone via Bluetooth to my computer.

Se7entadi wrote:
i can not open www.icloud.com/activationlock from my iphone . i get this error. Your browser is not supported. to use icloud, we recommend using the latest version of safari, firefox, or internet explorer. i have IOS 7.1.1
So follow the instructions and use one of the recommended browsers. What's the problem?

Depreciation Run Error "Not all the documents in the last posting run were

Hi,
When I tried to run depreciation, I found the error message as below.
"Not all the documents in the last posting run were posted"
How do I solve the problem?
Please advise me..
Thank you for your help..
Jake

Hi,
For an Update termination you need to go into the System Log to check the real cause of the termination.
My guess is that the document number has already been used. It has happened to me and I found no cause for that.
I did the following then:
I checked the highest used document number in that number range and corrected the from number of the number range.
Then I went into the TABA table and corrected the entries there that they corresponded to the number range.
Then I did a manual reconcilliation between AA and GL. In my case they matched, If they don't you would need to post manually to the GL to get them to match.
Then I ran recalculation of asset values. and finally an unplanned depreciation run.
For me it solved the problem.
Br
Cricke

"An error has occurred: Could not find the document." on opening the BO report

Hi ,
On publishing the BO report in Portal, we get the blank screen with warning message as below screenshot and facing the ""An error has occurred: Could not find the document."" error message when accessing the BO report using open document URL directly in browser instead of portal.
Link: http://<host>:8080/OpenDocument/opendoc/openDocument.jsp?sIDType=CUID&iDocID=ASClVc_yw55L
We already have many BO reports successfully running in the production environment.
But for this new report we are getting this error. The difference found in this report is from Infoviewapp the login page appears as below in to which the developer logs in.
But for the reports coming with error the login page authentication value is changed to "Enterprise". So the system related fields disappear after that and looks like below
Please let us know the root-cause of this error message. Is this something to do with user authorization in BO system at report level or some config changes related to SAP/Enterprise authentication.
Multiple posts in SDN related to this error message points to check for user authorizations in BO system. Please provide details on this if this is the case.
Regards,
Bhaskar

Hi ,
The dropdown is now made visible to the users in the opendocument property as per the suggestion in the below links. The user can choose the authentication type and login into reports after that.
http://scn.sap.com/thread/3525264
http://scn.sap.com/thread/1417858
My question now is after changing the visibility of the authentication true, the SSO doesn't work as before. Is there any way to make the SSO available with this setup ?
Regards,
Bhaskar

Error when trying to open, edit & save the document from email link

Hi,
The error occurs when user tries to open the document from the email link (after the document is "shared" with them.
The recipient has been given edit rights. When the document is opened it is opened in read only. The recipient will click "Edit Document" and then they receive an error
"The file or folder name http://servername/sites/documents/Shared Documents/IT/Test/TESTfile.xlsx?NoRedirect=true' contains characters that are not permitted. Enter a different name."
Any suggestions please.
Thanks.

Hi Inderjeet,
Thank you very much for you reply.
I tried with the LAN options, it didn't help.
I see that in the
http://blog.ray1.net/2007/12/file-or-folder-name-contains-characters.html it's written as the error occurs while "Creating a new site based on a custom site definition, you get the above error", which is not my case.
Mine happens when I click on the link from the email body. An exact thread I found :
http://social.technet.microsoft.com/Forums/systemcenter/en-US/d724a882-66cf-4515-a088-afd7d088b103/email-link-to-share-documents?forum=sharepointgeneral&prof=required
But no solution is mentioned there as well.
I think this is an issue with SharePoint 2013. Do you agree? I would like to invite more experts for their opinion on this please.
Many thanks & Regards

Performance Appraisal-Move the document from Part Appraiser to Appraiser

Hello
After the 2nd level manager (part appraiser) has rejected the document, it should be sent back to the 1st level manager review the notes and make changes before resending it back to the 2nd level manager.
When the second level manager receives the document, it is in "IN PROCESS-PART APPRAISAL IN PROCESS" status. Is it possible to change the status of the document from this status to "IN REVIEW" or some other status for the first level manager to make changes based on the 2nd level manager's feedback.
How else can we incorporate the functionality? Please advice.
Many thanks in advance.

Hello
We were able to achieve this by adding multiple substatus to the status "In Process" and then control the authorization at that level.
Thanks

Crawler not indexing the documents from repository

Similar Messages

Maybe you are looking for