Crazy flashing BUG on my screen during compression

Every time I start a compression I get a crazy flashing bug on screen. I have provided a video if anyone have any idea.
https://magekfilmworks.box.net/shared/static/46jazyxdz9.mov

Try running disk utility from safe boot or a system disk.

Similar Messages

Appear flashing line on the screen during work

I bought Macbook Air since 1st July 14. I found the flash line appear on screen during work but it's just shot line at the first and It appears just few secs. So I thought it's not too serious to me. Till now the line is seem more longer and appear frequently. Then I decide to take it to Service centre. They said my screen is not in its position. It's just a bit, If you don't look at it exactly, you won't notice it. I don't know what happen. It's usually as it was on fist day I bought it, never be fallen it. It's still in the good condition. They fixed my problem by re-fit my screen but after I use it again I still found that flash line. what should I do? Now my air got the scratch on the screen edge from re-fitted it. I really disappoint.

I'm assuming by "flash line" you mean there's a horizontal or vertical line randomly appearing on your screen? If that's the case I've seen that on laptops before. If its an intermittent issue try to move the screen forwards and backwards on its hinge to see if you can find one spot where that line almost always appears. You should have an issue with the cable connection to the main logic board, or the cable itself could be malfunctioning.
Also what exactly did they do when they "re-fit" your screen? Did they simple check the connectors, or actually dissemble the computer and resemble it? Either way if a cable is bad then it wouldn't have made a difference. You may be looking at a warranty replacement solution on this one.

'flashing' screen during capture

hi all,
i just downloaded FCPX from the app store onto the mid 2011 mac mini using 2.7 g intel core i7 with 8GB 1333 MHz DDR3 and Graphics AMD Radeon HD 6630M 256 MB on the OS X 10.9.4 (13E28). what's happening i've never seen before so am wondering what to do. during the capture the Media Import screen is importing but the screen is 'flashing' as if it's stuck on an earlier part of the footage (which is flashing over the capture from the camera.) the capture is continuing and it's only flashing on the import screen. i haven't taken the time to look at the captured footage in the timeline yet so don't know if it's like that there.
should i scrap this download and download this version of FCPX again from the app store?
rsvp...
~ tj

ignore post

HT3986 i get a black screen during windows 7 installation on bootcamp 5.0.1

i get a black screen during windows 7 installation on bootcamp 5.0.1 , it wont install

Hi wb2009,
I haven't found that the TV would be an issue, but did find an article that states to not have extra USB devices connected.
Boot Camp: Windows installation boots to black screen with blinking cursor
http://support.apple.com/kb/TS4536
The Windows installation may boot to a black screen with a blinking cursor. This can occur if you use a USB optical drive or USB Flash drive for the Windows installation and another USB device is also connected to the computer.
There's another article that mentions Windows XP or Vista that may apply.
Archived - Boot Camp: Start up to black screen after installing Windows
http://support.apple.com/kb/TS2600
Thank you for visiting Apple Support Communities.
Nubz

I5 17''MBP gets blue screen during install windows 7 32 bit

Hello all:
I heard that quite many people get classic windows' "blue screen" during using windows , whatever Windows XP, Vista or 7. But now i face the "blue screen" during install Windows 7, which means I even can not complete installation.
I bought my Macbook Pro i5 17'' one month ago, and I'm trying to install Windows 7 but I face the problem during the installation. After finishing first 4 steps the computer would restart and start to "finish installation", but at this time it gets "blue screen" and shows "error: 0x0000009c" and stuck there. I have to shut down the turn off button and interrupt the installation.
I don't know if there's any one else face this unlucky situation. I searched on the net and it says the problem could be from memory, graphic card (too new), or even overlocking the cpu,whatever it must be the problem of hardware. I thought it might be the problem of compatible.
If anyone knows how to deal with this problem??!! I do need to use some software under Windows system!

It is good to see that it is indeed a USB2.
The support software on the USB is used in the Pre-boot environment setup and provides drivers for Apple specific hardware, GPU, BT, Mouse, etc. You can verify that by looking at the USB contents. The DVD contains generic drivers when hardware is not recognized as defaults to use. Apple does enough 'secret sauce' to make them different. The following does not explicitly state the USB2 need when using the DVD Installer and mentions W8 (not W7).
From Boot Camp: Creating an ISO image from a Windows installation DVD - Apple Support
Insert a blank USB 2 flash drive that is a least 16GB in size into a USB port on the computer. Boot Camp Assistant uses this drive to store the Windows 8 install media and support drivers during installation of Windows.
Note: This flash drive needs to be formatted for the FAT32 file system and must use the Master Boot Record partitioning scheme. Use Disk Utility to check the format of the flash drive before proceeding, and partition or erase the flash drive if necessary.
I suspect the GPU is not getting the correct driver and the Installer fails. The Generic VGA should work. From the OS X side, can you see files in your BC volume? If yes, can you look for logs in the BC volume at the following locations.
./Windows/Inf/setupapi.dev.log
./Windows/Inf/setupapi.offline.log
./Windows/Inf/setupapi.setup.log
./Windows/Logs/SetupCleanupTask/setupact.log
./Windows/Logs/SetupCleanupTask/setuperr.log
./Windows/Panther/FastCleanup/setupact.log
./Windows/Panther/FastCleanup/setuperr.log
./Windows/Panther/setupact.log
./Windows/Panther/setuperr.log
./Windows/Panther/UnattendGC/setupact.log
./Windows/Panther/UnattendGC/setuperr.log
./Windows/setupact.log
./Windows/setuperr.log
./Windows/System32/Sysprep/Panther/IE/setupact.log
./Windows/System32/Sysprep/Panther/IE/setuperr.log

Apples update didn't work for me: Boot Camp: iMac displays a black screen during installation of Windows 7

Boot Camp: iMac displays a black screen during installation of Windows 7 - Apple Support
I have followed each of the steps listed in the link above with no success.
Prior to adding the extra drivers I was able to start the Windows install process up to reformatting the "Windows" Bootcamp drive. After that the computer would go through some instal processes and eventually restart. After the restart the screen would go black. The black screen lead me to the Apple Support link above dated March 5 2015. After going through steps listed in the link above, I get an error message stating that the D:\Sources\instal.win. file cannot be located. I am forced to restart the computer at that point and theWindows install process attempts to start again but always ends up at the same point.
Note: I am installing windows 7 Pro from a DVD. I scanned the AutoUnattend.xml file and noticed that it refers to "Windows 7 ULTIMATE" but not "Pro" or any others that I could see. (see below). Could that be part of the issue?
Any feedback would be greatly appreciated.
<cpi:offlineImage cpi:source="wim:d:/sources/install.wim#Windows 7 ULTIMATE" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
</unattend>
iMac (27-inch, Late 2009)
2.66 GHz Intel Core i5
16 GB 1067 MHz DDR3
ATI Radeon HD 4850 512 MB

Here is an over-simplified explanation of WIM and CLG files. Assume your DVD Media contains
W7- Ultimate
W7- Professional
W7- Home Premium
W7- Home Basic
WIM Files
File1
y
y
y
y
File2
y
y
y
y
File3
y
File4
y
y
File4
y
y
y
The File .wim will contains a compressed image which contains File [1...5].
The W7-Ultimate .clg will have 5 entries, with all set to 'Y'.
The W7-Professional .clg will have 5 entries, with 'Y','Y','N','Y','Y'.
The W7-Home Premium .clg will have 5 entries, with 'Y','Y','N','N','Y'.
The W7-Home Basic .clg file will have 5 entries, with 'Y','Y','N','N','N'.
This allows a single .wim Image file on the DVD media to be used to install any of the 5 flavors of Windows. When you enter your product key, the Installer knows what specific W7 variant you have the key for and will tell the WIM to extract the specific files the installer needs to be extracted.
The following line
<cpi:offlineImage cpi:source="wim:d:/sources/install.wim#Windows 7 ULTIMATE" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
is telling that a retail product key will be entered, which should go look for this specific .clg file (from the five you already have on disk). You can test if it will work for you by changing this line to the following
<cpi:offlineImage cpi:source="wim:d:/sources/install.wim#Windows 7 PROFESSIONAL" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
If it does not work, the other issue can be related to device discovery. Typically A: and B: device names are reserved for Floppy Drives. C: is your internal HDD.
D: can either point to the Optical drive, or the USB. The normal convention is that the removable media is named from Z: backwards. Y: and Z: are usually used for Network drives, so X: should be your USB. First try with the change to "Professional". If it does not work,

Samsung Video Flashing Bug

I found a bug in the current version of the firmware (version 1024) for the Samsung TV UN55D8000. I just wanted to let people be aware of the issue.
The issue is that the app flashes black when a video attempts to loop.
I have the stageVideo seek to the start to its 0 point when the netstream reports that the video has reached its end.
When the video loops, the entire app flashes to a black screen for a split second.
This is NOT a problem on the Broadcom developer box or on TiVo devices - just the above mentioned Samsung TV. Therefore, I assume this is a Samsung bug.

Thanks for sharing the info.

IMac displays a black screen during installation of Windows 7

I tried to install windows 7 on my imac 27" but imac displays a black screen during installation of windows 7.
I also tried to install it as apples instruction of http://support.apple.com/kb/ts3173 but it failed.
Any solution please.. thanks
I have a late 27" imac with OS X 10.85

Here is an over-simplified explanation of WIM and CLG files. Assume your DVD Media contains
W7- Ultimate
W7- Professional
W7- Home Premium
W7- Home Basic
WIM Files
File1
y
y
y
y
File2
y
y
y
y
File3
y
File4
y
y
File4
y
y
y
The File .wim will contains a compressed image which contains File [1...5].
The W7-Ultimate .clg will have 5 entries, with all set to 'Y'.
The W7-Professional .clg will have 5 entries, with 'Y','Y','N','Y','Y'.
The W7-Home Premium .clg will have 5 entries, with 'Y','Y','N','N','Y'.
The W7-Home Basic .clg file will have 5 entries, with 'Y','Y','N','N','N'.
This allows a single .wim Image file on the DVD media to be used to install any of the 5 flavors of Windows. When you enter your product key, the Installer knows what specific W7 variant you have the key for and will tell the WIM to extract the specific files the installer needs to be extracted.
The following line
<cpi:offlineImage cpi:source="wim:d:/sources/install.wim#Windows 7 ULTIMATE" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
is telling that a retail product key will be entered, which should go look for this specific .clg file (from the five you already have on disk). You can test if it will work for you by changing this line to the following
<cpi:offlineImage cpi:source="wim:d:/sources/install.wim#Windows 7 PROFESSIONAL" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
If it does not work, the other issue can be related to device discovery. Typically A: and B: device names are reserved for Floppy Drives. C: is your internal HDD.
D: can either point to the Optical drive, or the USB. The normal convention is that the removable media is named from Z: backwards. Y: and Z: are usually used for Network drives, so X: should be your USB. First try with the change to "Professional". If it does not work,

Phone screen during phone calls

Hi all,
not at all happy with the v2, as seems to be the consensus around here. My old 8gb with original software performed loads better, but we all know the problems despite the great possibilities it shows.
The big problem I'm having is with the screen during calls - previously the screen would go off when it's up against my head. Sensible, right? Now, the screen stays on during calls but switches off as soon as I pull it from my ear - kind of difficult if you're trying to end a call!! Currently I have to wait for the other person to hang up or I have to be lightning quick with the finger. Is anyone else having this issue???
A

Two things that could be happening-
If you are using the password lock feature on the phone, that is a bug that I hope apple fixes soon. As soon as you finish the call, it locks so you can't really end the call. You have to click home, enter the password, then hit end call.
If you aren't using password lock, what is probably happening, because I do this quite a bit, is the proximity sensor is towards the top left of the phone above where the carrier is displayed. When the phone is near my ear, the sensor goes on so it goes black, you move it away, it lights back up, but if you are still on a call or the call has not hung up which is usually the case because you want to press end call and if you hold the phone with your thumb or any part of the hand anywhere near the proximity sensor, then it goes black; move your hand towards the bottom of the phone and it lights back up.
Again I think apple made a bad call on the placement of the proximity sensor. I have the same issue with how they placed the speaker location. Almost always when I'm playing a game I'll end up covering the speaker on accident blocking the sound and then having to move my hands to hear the game sound/music.

I am getting frequent lock-ups and blue screens during boot up. The lock ups occur during normal use and I cannot click anything or force quit. The cursor shows something is loading, but never stops. I have to use power button. Ideas?

I am getting frequent lock-ups and blue screens during boot up on my Mac Pro. The lock- ups occur sometimes during normal use and I cannot click anything or force quit. The cursor shows something is loading, but never stops. I have to use power button.
I had the Mac Defender malware and I have used apple jack but still having issues.

I am getting frequent lock-ups and blue screens during boot up on my Mac Pro. The lock- ups occur sometimes during normal use and I cannot click anything or force quit. The cursor shows something is loading, but never stops. I have to use power button.
I had the Mac Defender malware and I have used apple jack but still having issues.

IPod touch 4G keeps flashing battery in lock screen

I plugged my iPod 4G into my new windows 8.1 laptop and I keep getting the battery/charging symbol flash on my lock screen when plugged in.
My iPod worked completely fine in my windows 7 laptop, there is nothing wrong with the iPod or the USB as far as im aware as it worked in windows 7 laptop and im assuming its something to do with my new laptop but have no idea...
If anyone has any idea to what is wrong please tell me... Im confused and don't understand whats going on.
Thanks in advance,
Stephanie.

Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
- If a 5G iPod
Iphone 5 lightning port charging problem - SOLUTION!
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
also
See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- Then do the other actions of:
iOS: Device not recognized in iTunes for Windows
paying special attention to item #5
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Also see:
iPod not recognised by windows iTunes
Troubleshooting issues with iTunes for Windows updates
- Try on another computer to help determine if computer or iPod problem

Audigy 4 gives blue screen during install of drivers on Windows XP SP3

FAudigy 4 gives blue screen during install of drivers on Windows XP SP3! Specs
Asus a8n-sli
GB RAM
6600 GT
Audigy 4
LC Power 550 W PSU
I put in the installation CD that comes with the card. I want to install everything (full install), and mid-install I get a blue screen.
I then uninstalled everything and tried only to install the updated drivers from the website in safe-mode and still a blue screen. Should I get the dump file and send it to Creative?
How do get this card to work like it should? I also have a remote control that came together with the card.
Im currently using the onboard AC97 Realtek ALC850 soundcard.
Whats the whole procedure to make this work? Detailed please. How do I eliminate all traces of the audigy on my PC?

Re: Audigy 4 gives blue screen during install of drivers on Windows XP SP38 Perhaps you'd want to read this old thread of mine about my misadventures with the same exact card you are trying to use. IMHO that card was not worth the time and money I spent on it (even even less the time and money it caused me to spend afterwards to repair the damage it caused.
Message Edited by CreativeSkeptic on 2-23-2008 0:4 PMMessage Edited by CreativeSkeptic on 2-23-2008 0:4 PM

Hey Dears, I was working with my Macbook pro 2011, then i have some flash light in the screen, so i shutdown the computer, when i try to open it again i had a black screen, so any one of you have any idea about what should i have to do ?

Hey Dears, I was working with my Macbook pro 2011, then i have some flash light in the screen, so i shutdown the computer, when i try to open it again i had a black screen, so any one of you have any idea about what should i have to do ?

Can you start Firefox in [[Safe mode]] ?
You can also do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
You can initially skip the step to create a new profile, that may not necessary for this issue.
See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

Toshiba M305D : blue windows screen during the install of Windows 7 / Vista, no Audio on Windows XP

Dear Users
Last week I had a clean install of Windows 7 64bit on my M305D-S4830 laptop.
I've used this OS on this machine before, and it worked fine.
After installing Win7, the device manager showed 2 unknown devices. First I've installed the O2 multimedia card reader, and it went ok. Secondly I've installed for the unknown device "hdmi audio" a hdmi audio driver from ATi, since the notebook has AMD 780V chipset and a Radeon HD3100 (it hasn't any hdmi output, but I didn't want to have any unknown devices).
And my nightmare begun.
While restarting after the driver upgrade, my brand new Win 7 boot hang on blue screen code: 0x00000124, which is common for many hardware and software faults. I ran safe mode to clean the system from the hdmi audio driver, but the catalyst install manager dind't let me to remove it. Since it was a fresh install on a formatted HDD, I took the time for another clean install (20 mins). But during the Win 7 install, the installer hang on blue screen, guess what, code: 0x00000124. I changed to the factory-backup Win Vista disks of my laptop, but Vista had the same problem, I couldn't install this OS either, blue screen during install, too.
I took a Win XP Prof SP3 as a last option, and I could finally install it. But after the install, I had problems with the Radeon HD3100, I couldn't install the driver from the .exe, I had to make it from the device manager via properties/I choose to/graphics adapters/own disk. So I don't have the control centre, but the display works in 1280x800.
The bigger problem is: no sound.
The device manager in Win XP shows only one unknown audio device: the hdmi audio. I can't install the conexant drivers, because it says I don't have the device for that. When I install the ATi hdmi driver for XP, I get the blue screen with the error 0x00000124. Nice.
I have updated bios, and made a proper format with the partititons deleted, but it didn't helped. I think the Vista/7 install crashes at the point, when it tries to install the audio driver during OS install, because the XP was running until I have tried to install it, too. But I can't configure the Vista/7 install not to try loading it.
So my laptop is only comnpatible with XP, the install of Vista or 7 crashes. And in XP, I have got no audio devices, therefore no sound. You can imagine, how glad I am looking at my Harman/Kardon speakers right now...
Any ideas?
Alex

Satellite M305D-S4830
Any ideas?
Alex, restore the hard disk to its original out-of-the-box contents using Toshiba recovery media. If you didn't burn them, order the discs.
Order Toshiba Recovery Media
If it doesn't run properly after that, you have a hardware malfunction.
-Jerry

Black screen during windows 7 install on 27inch iMac

My iMac turns to a black screen during windows 7 boot camp install. I can use the install disk on my wifes Macbook Pro so I know that the media is good.

Please re-post in the Boot Camp forum.

Crazy flashing BUG on my screen during compression

Similar Messages

Maybe you are looking for