Crazy lag issues upgrading from OS 10.58 to OS 10.6, what gives?

I've just upgraded to OS 10.6 from OS 10.5.8  on my 3.06ghz Intel Core 2 Duo iMac and pretty much everything has slowed down considerably. I've got 4gigs and 800 mhz of memory and my computer was lightning fast running 10.5 so I'm pretty sure that's not the issue.
My main problem  is that I'm no longer able to "spacebar" preview any files without extremely long lag times. Trying to preview video, music, and .PSD files takes 5 minutes to load in some cases even for a 10mb file. I'm in the process of editing over 200 video clips and this has basically prevented me from using this machine at all.
Additionally I made the mistake of deleting Quicktime 10 because the interface was horrendous and sticking with Quicktime 7 since I had already purchased a pro code for it. Even though Quicktime 7 is still on my computer all of my audio and video files are now opening in the "Grapher" utility by default, which is extremely annoying and ridiculous. How can I make Quicktime 7 my default again?
Anyone have any idea what would cause these issues and more importantly what can I do to resolve them?
Thank you!
JD

Try restarting in Safe Mode, this clears some of the caches  it's possible one has become corrupted. You should also Repair Disk Permissions using Disk Utility (Applications - Utilities - Disk Utility) and I'd also recommend doing a SMC reset (maybe even 2) and reset the PRAM.
SMC RESET
Shut down the computer.
Unplug the computer's power cord and all peripherals.
Press and hold the power button for 5 seconds.
Release the power button.
Attach the computers power cable.
Press the power button to turn on the computer.
PRAM RESET
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
Roger

Similar Messages

  • All VIs containing MathScript cause a fatal crash after upgrading from 8.2 to 8.5... what gives?

    So I finally took the plunge and updated to 8.5 from 8.2 and now when I open a project that was previously done (as in ready for release this week ) it causes a hard crash where LabVIEW closes completely.  I've looked and can't seem to find any others complaining of this.  My only option that works at this point is to have a coworker open all my VIs containing mathscript and delete the function with his 8.2 enviornment.  What could be causing this?  There has to be some simple answer...somewhere. 
    Thanks in advance for all the help!
    Regards,
    Dave

    These VIs work fine for me under LV 8.2 and will no longer work under LV 8.5.  The first one is a call to our power supplies, the second uses the math formula node to verify that some color and luminance parameters are valid.
    In the meantime I am stuck using a coworkers 8.2 development system with TS 3.5 to deploy which works with no issues.  When I try on my new system with 8.5 and TS 4.0 it crashes out.
    Thanks for any help you can provide.
    Regards,
    Dave
    Attachments:
    DMM - IVI Measure.vi ‏52 KB
    Verify Color and Brightness.vi ‏174 KB

  • Issues upgrading from 7.5.1 to 10gR3

    We are having issues upgrading from Content Server 7.5.1 to 10gR3 running a Sql Server 2005 back end (based on Windows Server 2003).
    We run through the upgrade process (which completes with warnings), but when we try to start the Content Server, we get the following error:
    ( 0%) Changing lengths of fields in table 'DocFormats'...
    system 01.17 12:17:42.738 main When asking the database
    for a list of tables, we got no tables back (internal)
    01.17 12:17:42.753 main !
    csUnableToLocateDatabaseTable,DocFormats-exception stack
    intradoc.data.DataException: !
    csUnableToLocateDatabaseTable,DocFormats
    <snip>
    Unable to locate table 'DocFormats' in database.
    We are looking for advice from anyone who has been through this upgrade (in the same type of environment), or who have encountered this error or anything like it. The error appears to indicate a database access issue, but we have profiled the upgrade and startup, and have proved that the processes are reaching the database. We
    have also tried the install against clean and complex installs, and have tried both JDTS and Microsoft drivers without success (same error).
    We have spent many days on this, and have been working with Oracle support, but are starting to worry about how realistic the upgrade is.
    Cheers,
    Dave T

    Oracle support suggested I execute an "exec sp_changeobjectowner 'DocFormats','<SchemaName>" command against the database.
    I did this for the DocFormats table only.
    When I tried to start the instance, the error message stated the DocFormats table was now missing.
    Inside the database, the table 'Stellent.DocFormats' was visible through SQL Server management.
    I then created a copy of this table as 'dbo.DocFormats' (as it was originally), and tried starting the process again (with the config.cfg variables you suggested).
    It turns out the upgrade process can now see the DocFormats table and upgrade it successfully (The dformat column is now showing as varchar(80) ).
    The startup process now fails at the very next table in the upgrade list (see output below).
    Sounds like a database owner/permissions issue.
    Any ideas from anyone with SQL Server experience?
    Output from \bin\idcserver.exe -console -debug:
    11:05:30.006     main     SELECT dValue FROM Config WHERE dSection='DevUpdate' AND dName='MetaFieldLengthUpdateV8'
    systemdatabase     01.18 11:05:30.006     main     1.79 ms. SELECT dValue FROM Config WHERE dSection='DevUpdate' AND dName='MetaFieldLengthUpdateV8'[Executed. Returned row(s): false]
    systemdatabase     01.18 11:05:30.006     main     SELECT dValue FROM Config WHERE dSection='DevUpdate' AND dName='FormatFieldLengthUpdateV8'
    systemdatabase     01.18 11:05:30.006     main     2.56 ms. SELECT dValue FROM Config WHERE dSection='DevUpdate' AND dName='FormatFieldLengthUpdateV8'[Executed. Returned row(s): false]
    ( 0%) Changing lengths of fields in table 'DocFormats'...
    systemdatabase     01.18 11:05:30.022     main     getColumns DocFormats
    systemdatabase     01.18 11:05:30.022     main     1.66 ms. getColumns DocFormats[Retrieved 3 columns.]
    systemdatabase     01.18 11:05:30.084     main     Table list: DocFormats
    systemdatabase     01.18 11:05:30.084     main     SELECT * FROM DocFormats
    systemdatabase     01.18 11:05:30.084     main     2.83 ms. SELECT * FROM DocFormats[Executed. Returned row(s): true]
    systemdatabase     01.18 11:05:30.100     main     Delete DocFormats
    systemdatabase     01.18 11:05:30.116     main     drop table DocFormats
    systemdatabase     01.18 11:05:30.256     main     148 ms. Delete DocFormats[Executed]
    systemdatabase     01.18 11:05:30.256     main     Connection with id of 'main.1' is removed from active connections with key of 'main'.
    systemdatabase     01.18 11:05:30.256     main     release pool connection
    systemdatabase     01.18 11:05:30.256     main     assigning connection
    systemdatabase     01.18 11:05:30.256     main     Connection with last id of <unassigned> is added to active connections with key of 'main'.
    systemdatabase     01.18 11:05:30.256     main     Assigned connection to this thread, took 0.49 ms.
    systemdatabase     01.18 11:05:30.256     main     Preparing connection for use, id initialized as main.2
    systemdatabase     01.18 11:05:30.256     main     dFormat varchar(80) NOT NULL, dConversion varchar(30) NULL, dDescription varchar(80) NULL|PK_DocFormats| PRIMARY KEY (dFormat)
    systemdatabase     01.18 11:05:30.256     main     CREATE TABLE DocFormats (dFormat varchar(80) NOT NULL, dConversion varchar(30) NULL, dDescription varchar(80) NULL, CONSTRAINT PK_DocFormats PRIMARY KEY (dFormat))
    systemdatabase     01.18 11:05:30.256     main     7.25 ms. dFormat varchar(80) NOT NULL, dConversion varchar(30) NULL, dDescription varchar(80) NULL|PK_DocFormats| PRIMARY KEY (dFormat)[Executed.]
    systemdatabase     01.18 11:05:30.256     main     Connection with id of 'main.2' is removed from active connections with key of 'main'.
    systemdatabase     01.18 11:05:30.256     main     release pool connection
    systemdatabase     01.18 11:05:30.256     main     assigning connection
    systemdatabase     01.18 11:05:30.256     main     Connection with last id of <unassigned> is added to active connections with key of 'main'.
    systemdatabase     01.18 11:05:30.272     main     Assigned connection to this thread, took 2412 ns.
    systemdatabase     01.18 11:05:30.272     main     Preparing connection for use, id initialized as main.3
    systemdatabase     01.18 11:05:30.272     main     SELECT * FROM DocFormats
    systemdatabase     01.18 11:05:30.288     main     4.26 ms. SELECT * FROM DocFormats[Executed. Returned row(s): false]
    systemdatabase     01.18 11:05:30.288     main     INSERT INTO DocFormats (dFormat, dConversion, dDescription) values('application/msword', 'PassThru', 'apMicrosoftWordDesc')
    systemdatabase     01.18 11:05:30.288     main     2.93 ms. INSERT INTO DocFormats (dFormat, dConversion, dDescription) values('application/msword', 'PassThru', 'apMicrosoftWordDesc')[Executed. 1 rows affected.]
    ( 0%) Importing table 'DocFormats'...
    systemdatabase     01.18 11:05:30.288     main     INSERT INTO DocFormats (dFormat, dConversion, dDescription) values('application/pdf', 'PassThru', 'apPdfOptimization')
    systemdatabase     01.18 11:05:30.288     main     1.87 ms. INSERT INTO DocFormats (dFormat, dConversion, dDescription) values('application/pdf', 'PassThru', 'apPdfOptimization')[Executed. 1 rows affected.]
    systemdatabase     01.18 11:05:30.288     main     INSERT INTO DocFormats (dFormat, dConversion, dDescription) values('application/rtf', 'PassThru', 'apRtfDesc')
    systemdatabase     01.18 11:05:30.303     main     2.06 ms. INSERT INTO DocFormats (dFormat, dConversion, dDescription) values('application/rtf', 'PassThru', 'apRtfDesc')[Executed. 1 rows affected.]
    systemdatabase     01.18 11:05:30.303     main     INSERT INTO DocFormats (dFormat, dConversion, dDescription) values('application/vnd.ms-excel', 'PassThru', 'apMicrosoftExcelDesc')
    systemdatabase     01.18 11:05:30.303     main     1.70 ms. INSERT INTO DocFormats (dFormat, dConversion, dDescription) values('application/vnd.ms-excel', 'PassThru', 'apMicrosoftExcelDesc')[Executed. 1 rows affected.]
    systemdatabase     01.18 11:05:30.303     main     INSERT INTO DocFormats (dFormat, dConversion, dDescription) values('application/vnd.ms-powerpoint', 'PassThru', 'apMicrosoftPowerPointDesc')
    systemdatabase     01.18 11:05:30.303     main     1.69 ms. INSERT INTO DocFormats (dFormat, dConversion, dDescription) values('application/vnd.ms-powerpoint', 'PassThru', 'apMicrosoftPowerPointDesc')[Executed. 1 rows affected.]
    systemdatabase     01.18 11:05:30.303     main     INSERT INTO DocFormats (dFormat, dConversion, dDescription) values('application/vnd.ms-project', 'PassThru', 'apMicrosoftProjectDesc')
    systemdatabase     01.18 11:05:30.303     main     1.53 ms. INSERT INTO DocFormats (dFormat, dConversion, dDescription) values('application/vnd.ms-project', 'PassThru', 'apMicrosoftProjectDesc')[Executed. 1 rows affected.]
    systemdatabase     01.18 11:05:30.303     main     INSERT INTO DocFormats (dFormat, dConversion, dDescription) values('application/vnd.visio', 'PassThru', 'apVisioDesc')
    systemdatabase     01.18 11:05:30.303     main     1.63 ms. INSERT INTO DocFormats (dFormat, dConversion, dDescription) values('application/vnd.visio', 'PassThru', 'apVisioDesc')[Executed. 1 rows affected.]
    systemdatabase     01.18 11:05:30.303     main     INSERT INTO DocFormats (dFormat, dConversion, dDescription) values('application/wordperfect', 'PASSTHRU', 'apWordPerfectDesc')
    systemdatabase     01.18 11:05:30.303     main     1.98 ms. INSERT INTO DocFormats (dFormat, dConversion, dDescription) values('application/wordperfect', 'PASSTHRU', 'apWordPerfectDesc')[Executed. 1 rows affected.]
    systemdatabase     01.18 11:05:30.303     main     INSERT INTO DocFormats (dFormat, dConversion, dDescription) values('application/write', 'PassThru', 'apMicrosoftWriteDesc')
    systemdatabase     01.18 11:05:30.319     main     4.89 ms. INSERT INTO DocFormats (dFormat, dConversion, dDescription) values('application/write', 'PassThru', 'apMicrosoftWriteDesc')[Executed. 1 rows affected.]
    systemdatabase     01.18 11:05:30.319     main     INSERT INTO DocFormats (dFormat, dConversion, dDescription) values('image/graphic', 'ImageThumbnail', 'apThumbnailsDesc')
    systemdatabase     01.18 11:05:30.319     main     2.12 ms. INSERT INTO DocFormats (dFormat, dConversion, dDescription) values('image/graphic', 'ImageThumbnail', 'apThumbnailsDesc')[Executed. 1 rows affected.]
    systemdatabase     01.18 11:05:30.319     main     INSERT INTO DocFormats (dFormat, dConversion, dDescription) values('text/html', 'PassThru', 'Hyperlink text document')
    systemdatabase     01.18 11:05:30.319     main     1.84 ms. INSERT INTO DocFormats (dFormat, dConversion, dDescription) values('text/html', 'PassThru', 'Hyperlink text document')[Executed. 1 rows affected.]
    systemdatabase     01.18 11:05:30.319     main     INSERT INTO DocFormats (dFormat, dConversion, dDescription) values('text/plain', 'PassThru', 'Text file')
    systemdatabase     01.18 11:05:30.319     main     1.66 ms. INSERT INTO DocFormats (dFormat, dConversion, dDescription) values('text/plain', 'PassThru', 'Text file')[Executed. 1 rows affected.]
    systemdatabase     01.18 11:05:30.319     main     INSERT INTO DocFormats (dFormat, dConversion, dDescription) values('text/postscript', 'Distiller', 'apDistillerDesc')
    systemdatabase     01.18 11:05:30.319     main     1.60 ms. INSERT INTO DocFormats (dFormat, dConversion, dDescription) values('text/postscript', 'Distiller', 'apDistillerDesc')[Executed. 1 rows affected.]
    ( 17%) Changing lengths of fields in table 'ExtensionFormatMap'...
    systemdatabase     01.18 11:05:30.319     main     Alter ExtensionFormatMap
    systemdatabase     01.18 11:05:30.335     main     !csDbUnableToPerformAction_alter,\!csDbTableMissing
    (internal)     01.18 11:05:30.335     main     setExceptionCause threw: null
    systemdatabase     01.18 11:05:30.335     main     15 ms. Alter ExtensionFormatMap[!csDbTableMissing]
    systemdatabase     01.18 11:05:30.335     main     Connection with id of 'main.3' is removed from active connections with key of 'main'.
    systemdatabase     01.18 11:05:30.335     main     release pool connection
    (internal)     01.18 11:05:30.350     main     !csDbUnableToPerformAction_alter,\!csDbTableMissing-exception stack
    intradoc.data.DataException: !csDbUnableToPerformAction_alter,\!csDbTableMissing
         at intradoc.jdbc.JdbcWorkspace.alterTable(Unknown Source)
         at intradoc.server.IdcExtendedLoader.changeFieldLength(Unknown Source)
         at intradoc.server.IdcExtendedLoader.expandFormatFieldLengthsV8(Unknown Source)
         at intradoc.server.IdcExtendedLoader.extraBeforeCacheLoadInit(Unknown Source)
         at intradoc.server.IdcSystemLoader.loadCaches(Unknown Source)
         at intradoc.server.IdcServerManager.init(Unknown Source)
         at IdcServer.init(Unknown Source)
         at IdcServer.main(Unknown Source)
    Caused by: java.sql.SQLException: !csDbTableMissing
         ... 8 more
    Unable to alter table '!csDbTableMissing'.

  • Upgrading from 10.4.11 to 10.7. What are the steps and do I also need to pay for 10.5 and 10.6 along the way?

    Hi. I wannt to upgrade from 10.4.11 to 10.7.
    What are the steps and do I also need to pay for 10.5 and 10.6 along the way?
    According to the 10.7 lion page on 'store' it says that you need 10.6 to use it does this mean I'm going to have to do 3 upgrades?
    Thanks

    Why do yoy want Lion/10.7???
    Anyway, if your Mac meets the requirements you can skip 10.5.x, and even 10.6.x if you can afford to erase all your data.
    Snow Leopard/10.6.x Requirements...
    General requirements
       * Mac computer with an Intel processor
        * 1GB of memory (I say 4GB at least)
        * 5GB of available disk space (I say 30GB at least)
        * DVD drive for installation
        * Some features require a compatible Internet service provider; fees may apply.
        * Some features require Apple’s MobileMe service; fees and terms apply.
    Which apps work with Mac OS X 10.6?...
    http://snowleopard.wikidot.com/
    It looks like they might still have it...
    http://store.apple.com/us/product/MC573Z/A?fnode=MTY1NDAzOA
    If it's a core Duo & not a Core2Duo, then it'll only run in 32 bit mode.
    Lion/101.7 System requirements
        •    x86-64 processor (Macs with an Intel Core 2 Duo, Intel Core i3, Intel Core i5, Intel Core i7, or Xeon processor.)
        •    At least 2GB of memory[14]
        •    Latest version of Mac OS X Snow Leopard (10.6.8), with the Mac App Store installed
        •    At least 4GB of disk space for downloading[14]
    Like Snow Leopard, Lion does not support PowerPC-based Macs (e.g., Power Macs, PowerBooks, iBooks, iMacs (G3-G5), eMacs).
    Lion also does not support 32-bit Intel Core Duo or Core Solo based Macs. Rosetta is no longer available in Lion, which means Lion no longer supports PowerPC applications.
    http://en.wikipedia.org/wiki/Mac_OS_X_Lion#System_requirements
    http://www.apple.com/macosx/how-to-buy/
    What applications are not compatible with Mac OS X 10.7 "Lion"?
    http://ow.ly/5Iz09
    http://roaringapps.com/apps:table

  • Upgrading from SCOM 2012 SP1 to SCOM 2012 R2 what CU do i install? CU5?

    Hi,
    I just upgraded from SCOM 2012 SP1 to SCOM 2012 R2. What CU version should I install? CU5?
    Thanks
    K

    The most current CU version os SCOM 2012R2 is CU4
    You can download it from
    https://support.microsoft.com/kb/2906925?wa=wsignin1.0
    For detail description of SCOM 2012 R2 CU4, you may refer to
    http://support.microsoft.com/kb/2992020
    and
    http://syscentercldman.blogspot.hk/2014/12/update-of-scom-2012-r2-ur4.html
    Roger

  • I could export from iPhoto 6.0.0 until today.  What gives?

    I could export photos from iPhoto 6.0.0 until today.  What gives?

    I'm reading this in the iPhoto for iOS forum. You might want to post this in an iPhoto for Mac forum. When you do you might explain what you are doing, what error messages do you receive and any other things that might help users help understand your problem.

  • Issue: Upgrading from 11i to R12 - zxmiggltaxopts.sql

    Hi,
    we are upgrading from 11.5.10.2 to 12.1.1. During upgrade patch, one of the worker zxmiggltaxopts.sql has failed with below errors:
    sqlplus -s APPS/***** @/orafinx/apps/apps_st/appl/zx/12.0.0/patch/115/sql/zxmiggltaxopts.sql
    declare
    ERROR at line 1:
    ORA-20001:
    ORA-06512: at "APPS.APP_EXCEPTION", line 72
    ORA-06512: at "APPS.ZX_MIG_GL_TAX_OPTIONS_PKG", line 131
    ORA-06512: at line 8
    We are unable to find any hits for this particular error in MOS. Have any one else on the forum faced this particular issue? any known issues or workarounds that might help us ?
    Thanks a lot for your help.
    Regards,
    Kai

    Similar issue is reported in (Bug 8608790: APPLYING PATCH: ADWORKER FAILED /ORA-06512: AT) but it is not much helpful.
    I would suggest you log a SR.
    Thanks,
    Hussein

  • Any issues upgrading from 1.0.2 to 1.1.2?

    Hello,
    I have a regular unhacked/locked phone and it's on 1.0.2. I never upgraded to 1.1.1 because of the rumor of the battery draining issue. I have very good battery usage. Now that 1.1.2 seem to have fix that, I'd like to upgrade.
    So I'd like to hear from anyone who upgraded from 1.0.2 to 1.1.2 whether there was issue or not.
    Thanks in advance.

    Answering my own question. Just took the leap and upgraded from 1.0.2 to 1.1.2. No problems at all. Took all of 15 minutes. Had the phone connected the whole time and didn't disconnect until the entire process is finished with the message that the phone has been activated.
    There were two "hold my breath" spots, one is the yellow triangle with "connect iPhone to iTune", the other is the end of upgrade with the white plug to iTune icon and something about emergency call. Both lasted 2-3 seconds before the process continued on.
    Now I get to have fun with the new features. I'll monitor the battery usage as I was getting excellent usage with 1.0.2.

  • Any Issues Upgrading from Word 2003 to 2007?

    Hello. We have the option in my department to upgrade from
    Word 2003 to Word 2007. My team still has some help projects in
    RoboHelp for Word. Before we decide to upgrade, I was wondering if
    anyone else using RoboHelp 7 (for Word) has upgraded to Microsoft
    Word 2007, and if they have encountered any issues. Thanks for any
    input.

    Thanks for all the helpful feedback, everyone. Here's an
    update, just fyi. I loaded Office 2007 today, and seem to be
    encountering one of the issues described by David Hurlston. When I
    try to create a new popup, it takes a little over one minute for
    the Insert Popup window to appear. Then when I select the topic to
    which I want to link and click OK, it takes another 10 seconds or
    so for the link to appear.
    I also received the "Microsoft Office Word has encountered a
    problem and needs to close" error five times in the past hour, when
    just trying to add new topics. I ran Microsoft Office Diagnostics,
    and it was unable to diagnose the cause of the crash. I'm using
    RoboHelp for Word 7.0, Build 7.02.001. (I have the full Adobe
    Technical Communication Suite with all of the latest updates
    installed, and just loaded Office 2007 today, along with all of the
    latest Windows and Office updates.)
    This is the perfect time for our team to upgrade to Office
    2007 since we're at the very beginning of a release, so I'm going
    to continue testing to see if I can figure out why it's a bit
    sluggish and why it's crashing. I just wanted to follow up on my
    original post in case any of this info is helpful.
    On a semi-related note... I'm usually pretty good about
    finding my way around in new user interfaces, but it took me about
    ten minutes to figure out how to access the Insert Popup window
    (due to the new Word UI). If anyone knows of a handy reference
    guide for people upgrading to RoboHelp for Word 2007, let me know.
    I checked the LiveDocs for RoboHelp for Word, but the version I
    found currently contains the old icons I'm used to. (I'm hoping to
    find some type of quick reference that explains where to find
    things that have moved and/or changed icons. I found a great
    interactive tool on Microsoft's site, but it seems to be specific
    to Word docs, without addressing the RoboHelp-specific options.)
    Thanks again for all the input!

  • If I upgrade from my old iPhone to a newer one, what info will I lose?

    This is a different situation than usual.  My daughter needs to upgrade from her iPhone 4 to an iPhone 5s.  She is afraid she will lose the text messages and voice mails from her boyfriend, who died in June.  Her 4 is essentially falling apart, so it's time to switch.  Is there a way she can save the text messages and voice mails from her old phone to her new one?  She's never used iCloud, since she syncs her phone on her MacBook Pro via iTunes. ot a
    I am not a techie, so please use plain English.
    Thanks. 

    In her situation you can also get programs that will extract content from an iPhone backup in iTunes. This would be a good way to archive the texts. And you can also copy them from the phone itself using 3rd party software such as TouchCopy.
    I am sorry for her loss; it is especially tragic when young.

  • Any problems/issues upgrading from iPhoto 6.0.6 to iPhoto 8?

    Hello, I am about to purchase iLife 08 and upgrade iPhoto 6 to iPhoto 8. Does anyone know of any problems in doing this, pitfalls to watch out for, etc.? Thanks, PP

    pokerpal
    No issues but there are changes.
    Have you your photos organised in Rolls in v6? If so, make sure that each roll has a name other than the default one. So make sure your Roll 123 is named Spring 06 or whatever, otherwise the rolls will be split into Events. The primary difference between Events and Rolls is that Events are based on the date the pics were taken, rolls on the dates the pic were imported.
    You can rename rolls using the Info Pane (wee 'i', lower left) the name and date fields are editable.
    If you've no interest in Rolls, then ignore the above.
    Other than that make a back up, of course. Then update iLife and simply launch iPhoto. It will ask is it okay to upgrade the library. Say yes and off you go.
    With iPhoto 7 (iLife 08) the old iPhoto Library Folder is now a Unix Style Package File. The change was made to the format of the iPhoto library because many users were inadvertently corrupting their library by browsing through it with other software or making changes in it themselves. Before you panic:
    There are many, many ways to access your files in iPhoto:
    For 10.5 users: You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Apple-Click for selecting multiple pics.
    Uploaded with plasq's Skitch!
    To upload to a site that does not have an iPhoto Export Plug-in the recommended way is to Select the Pic in the iPhoto Window and go File -> Export and export the pic to the desktop, then upload from there. After the upload you can trash the pic on the desktop. It's only a copy and your original is safe in iPhoto.
    This is also true for emailing with Web-based services. If you're using Gmail you can use THIS
    If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
    If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
    Or, if you want to access the files with iPhoto not running, then create a Media Browser using Automator (takes about 10 seconds) or use THIS
    Other options include:
    1. *Drag and Drop*: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
    2. *File -> Export*: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
    3. *Show File*: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
    Regards
    TD

  • Known Issues Upgrading from Apex 3.0.1 to 3.1.1

    Hi,
    We are in the process of upgrading to 3.1.1 from 3.0.1, are there any known issues (critical) that people can share?
    Have heard that there might be an issue with the Shuttle item - is this correct?
    Thanks.
    Tony.

    Hello,
    >> Have heard that there might be an issue with the Shuttle item - is this correct?
    I’m not aware of any critical issues with the shuttle item, or any other items, for that matter, regarding upgrade to 3.1.1. However …
    Version 3.1 introduced extensive use with the ‘FIELDSET’ tag, in all the compound items, like data picker, checkboxes, shuttle etc. This use might cause some layout problems, or the need to adjust some JavaScript code, but nothing that can’t be overcome. You can read the following for some more details:
    FIELDSET – new layout behavior in 3.1.1
    3.1 upgrade problem:  Post Element Text does not align properly
    Other than that, and as far as my own experience goes, it’s a smooth upgrade.
    Regards,
    Arie.

  • BO XI InfoStore Service Issue - upgrading from CR 10 to BO XI

    Ours is a Java web application that works with BO 10. After we upgraded to BI XI, when I login to the CMS server (successfully) and try to get the InfoStore with this code
    IInfoStore iStore = (IInfoStore) es.getService("InfoStore");
    I get the following exception
    ERROR: 2011-06-28 20:20:53,738 com.crystaldecisions.enterprise.ocaframework.WireOb2Unpacker - initialize(): invalid xrl,3&U=10,03&.1={3&1=301,03&2=301,03},2z&.2={3&1=302,03&2=302,03},2z&.3={3&1=303,03&2=303,03},2z&.4={3&1=304,03&2=304,03},2z&.5={3&1=305,03&2=305,03},2z&.6={3&1=306,03&2=306,03},2z&.7={3&1=307,03&2=307,03},2z&.8={3&1=308,03&2=308,03},2z&.9={3&1=309,03&2=309,03},2z&.?={3&1=310,03&2=310,03},2z
    com.crystaldecisions.celib.exception.c: ASSERTION FAILED
         at com.crystaldecisions.celib.trace.d.a(Unknown Source)
         at com.crystaldecisions.enterprise.ocaframework.k.a(Unknown Source)
         at com.crystaldecisions.celib.properties.Property.a(Unknown Source)
         at com.crystaldecisions.celib.properties.Property.getPropertyBag(Unknown Source)
         at com.crystaldecisions.celib.properties.PropertyBag.getPropertyBag(Unknown Source)
         at com.crystaldecisions.sdk.occa.pluginmgr.internal.a.getSecurityInfo(Unknown Source)
         at com.crystaldecisions.sdk.occa.infostore.internal.InfoStore.a(Unknown Source)
         at com.crystaldecisions.sdk.occa.infostore.internal.InfoStore.<init>(Unknown Source)
         at com.crystaldecisions.sdk.occa.infostore.internal.InfoStoreFactory.makeOCCA(Unknown Source)
         at com.crystaldecisions.sdk.framework.internal.a.getService(Unknown Source)
         at com.crystaldecisions.sdk.framework.internal.a.getService(Unknown Source)
    This does NOT happen when I connect to CR 10. Only with the new BO XI, I come across this issue. I am using the sdk from BO XI installation. I tried on Java 1.4 and 1.6 with the same results.
    The report viewer (CrystalReportViewer) throws a NullPointerException when the following is executed in the jsp
    viewer.processHttpRequest(request, response, getServletConfig().getServletContext(), out);
    stack trace:
    java.lang.NullPointerException
         at com.crystaldecisions.enterprise.ocaframework.ServerSpec.a(Unknown Source)
         at com.crystaldecisions.enterprise.ocaframework.ServerSpec.<init>(Unknown Source)
         at com.crystaldecisions.enterprise.ocaframework.AbstractServerHandler.buildServerInfo(Unknown Source)
         at com.crystaldecisions.enterprise.ocaframework.AbstractServerHandler.buildClusterInfo(Unknown Source)
         at com.crystaldecisions.enterprise.ocaframework.u.a(Unknown Source)
         at com.crystaldecisions.enterprise.ocaframework.ServiceMgr.do(Unknown Source)
         at com.crystaldecisions.enterprise.ocaframework.l.a(Unknown Source)
         at com.crystaldecisions.enterprise.ocaframework.m.a(Unknown Source)
         at com.crystaldecisions.enterprise.ocaframework.ServiceMgr.getManagedService(Unknown Source)
         at com.crystaldecisions.sdk.occa.managedreports.ps.internal.j.a(Unknown Source)
         at com.crystaldecisions.sdk.occa.managedreports.ps.internal.j.<init>(Unknown Source)
         at com.crystaldecisions.sdk.occa.managedreports.ps.internal.PageServerRequesterFactory.makePageServerRequester(Unknown Source)
         at com.crystaldecisions.sdk.occa.managedreports.ps.internal.c.if(Unknown Source)
         at com.crystaldecisions.sdk.occa.managedreports.ps.internal.c.getPage(Unknown Source)
         at com.crystaldecisions.report.web.viewer.ReportAgent.a(Unknown Source)
         at com.crystaldecisions.report.web.viewer.CrystalReportViewer.goto(Unknown Source)
         at com.crystaldecisions.report.web.ServerControl.a(Unknown Source)
         at com.crystaldecisions.report.web.ServerControl.processHttpRequest(Unknown Source)
         at org.apache.jsp.jsp.reportviewer.ReportViewer_jsp._jspService(ReportViewer_jsp.java:54)
         at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:92)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:720)
         at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:162)
         at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:240)
         at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:187)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:720)
         at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:628)
         at org.apache.catalina.core.ApplicationDispatcher.doForward(ApplicationDispatcher.java:383)
         at org.apache.catalina.core.ApplicationDispatcher.forward(ApplicationDispatcher.java:307)
    I am not sure if the BO installation on the server is the issue or the code on the application side. Also our administrator says that he does not see any log (audit) to attribute to my issues.
    Thank you in advance for any help you may provide in resolving this.

    The problem that you are encountering may be due to conflicting or not up-to-date jar files in your cutom web application.
    I would suggest that you confirm that the BusinessObjects jar files that you are using in your custom application on the XI environment (I am assuming that you are now on an XI R3 environment) are completely up-to-date and do not conflict with any of the Crystal jar files that you were using in the CE10 environment.
    To do this, please remove all of the CE10 jar files from your custom web application.  Then add all of the BusinessObjects XIR3 jar files to your custom web application.
    The SDK jar files for a Windows environment can be found in the following location:
    <Business Objects Installation Directory>\Common\4.0\java\lib and
    <Business Objects Installation Directory>\Common\4.0\java\lib\external
    Additionally, if you are using the Viewers SDK, the crystal report viewer files can be found in this location:
    <Business Objects Installation Directory>\Common\4.0\crystalreportviewers12
    You don't need to include all of the jar files into your custom application.  Depending on which SDKs you are using, the jar files that are required are different.   We have a developer's guide for the Enterprise SDK that lists the jar files that are required for the various SDKs.  The developer's guide can be downloaded from the following location:
    http://help.sap.com/businessobject/product_guides/boexir31SP3/en/boesdk_java_dg_12_en.zip
    When you open the Developer's Guide, go to "Setting up the development environment" --> "Web application setup" --> "JAR files needed for deployment of Business Objects Software".  There you will see all of the "Core JAR Files" and "Dependent JAR Files" that are required in your custom SDK web application.
    You should also verify that your web.xml is set up properly for the XIR3 environment.  Information on how to set this up is also including in the Developer's Guide.
    I hope that after carrying out these steps that this helps to resolve the problem.
    Regards.
    - Robert

  • Issue upgrading from R 3.1.2 to R 3.1.3

    Hi, i wanted to upgrade my system tonight,
    but I am having a problem with the R package.
    I currently have version 3.1.2, and an upgrade to version 3.1.3 is available.
    After typing
    sudo pacman -Syu
    the upgrade of the packages fails with the error message:
    error: failed to commit transaction (conflicting files)
    r: /usr/lib/R/library/Matrix/po/fr/LC_MESSAGES/Matrix.mo exists in filesystem
    r: /usr/lib/R/library/spatial/po/ko/LC_MESSAGES/R-spatial.mo exists in filesystem
    Any idea how I can fix the issue?
    Thanks a lot for the help,
    Cheers,
    Luca

    Hmmm:
    $ pkgfile -v Matrix.mo
    extra/r 3.1.2-1 /usr/lib/R/library/Matrix/po/de/LC_MESSAGES/Matrix.mo
    extra/r 3.1.2-1 /usr/lib/R/library/Matrix/po/en@quot/LC_MESSAGES/Matrix.mo
    extra/r 3.1.2-1 /usr/lib/R/library/Matrix/po/pl/LC_MESSAGES/Matrix.mo
    After updating package database:
    $ pkgfile -v Matrix.mo
    extra/r 3.1.3-1 /usr/lib/R/library/Matrix/po/de/LC_MESSAGES/Matrix.mo
    extra/r 3.1.3-1 /usr/lib/R/library/Matrix/po/en@quot/LC_MESSAGES/Matrix.mo
    extra/r 3.1.3-1 /usr/lib/R/library/Matrix/po/fr/LC_MESSAGES/Matrix.mo
    extra/r 3.1.3-1 /usr/lib/R/library/Matrix/po/pl/LC_MESSAGES/Matrix.mo

  • Issues upgrading from iOS 7.1.2 to 8.1.2 on my iPhone 5c.

    I recently returned from a deployment overseas.  While I was away, iOS 8 was released and I am now attempting to update my 16GB iPhone 5c from 7.1.2.  I have attempted to do this via wifi which gives me an error message reading "Software Update Failed; An error occurred downloading iOS 8.1.2".  When I try to update through iTunes, the update file downloads to my iMac, but when iTunes begins to install it, I get an error message that reads "The software for the iPhone 'Mark's iPhone' was corrupted during download".  I've also been experiencing the same problem with my iPad 2, though I'm not as concerned about that as I don't use it much these days.  Has anyone else been experiencing a similar problem?  Any advice is appreciated.  Thanks!

    I took the device to an Apple Service Provider and they did that, restore from DFU. It worked!
    Search for: Device Firmware Update

Maybe you are looking for

  • Data not updated to cube from DSO

    Hi all, We have a scenario where in the dtp from the DSO to cube does not write any data records to the cube, where as we are able to see 9 records when we debug the transformation which has a start routine. Could you kindly suggest what the issue ca

  • Problem - Values are not stored into Tables when value are accepted from us

    // jsp code <%@ page import="java.util.Enumeration" %> <%@ page import="java.util.Vector" %> <%@ page import="java.util.*" %> <%@ page import="java.lang.*" %> <%@ page import="java.sql.*" %> <%@ page import="beans.register2" %> <jsp:useBean id="regis

  • I'm not download ringtone in itunes store

    I'm not download ringtone in itunes store   ;(    you have Solution ?   but  it make an auto payment from my account

  • Mail fonts keep changing

    I type an email using Helvetica or Arial, send it off and all looks fine.  When I see a copy of the email in someone's response my email looks terrible as the fonts have all changed to some other type like Times Roman or some other similar ugly font.

  • How to remove container from Application Support?

    How to remove specific containers from Library/Application Support/Containers? Is it good or bad for exisiting application? Please, assist!