Crazy large file sizes on capturing from standard tape....

All, first post here, and only because I'm at my wits end!
I've been using iMovie for sometime with my current camera (Panasonic PV-GS180). Those file sizes were large, but reasonable.
Since then, I've decided to bump up my skills and work with FCE. Great product, but there is one thing that is preventing me from using it.... CRAZY LARGE FILES!!
I had a 42GB file size for 10 or 20 mins of capture time! That's just crazy, isn't it?
I used Easy Setup to choose DV-NTSC 32kHZ (My recorder is using 12-bit audio). My scratch disk is my local disk, which has 43GB avail. The top of the capture window shows "Total Free Time (AV) 208.7 min".
But I only get 10 or 20 minutes before the capture hangs, because my drive is full! Am I doing anything wrong? Will I have to go back to iMovie to import my video?
Thanks for your advice and suggestions!

Sorry guys, I thought I gave enough information. But thanks so much for staying with the discussion! Keep in mind, that I'm just a network engineer, and am a newbie at this FCE thing!
I thought there was only one way to capture, so my apologies for not including all the information. Yes, I'm using the capture now, as that's the only way I knew how. I'll look into the "Log and Capture".
As far as the types of files, I am unsure. It does not have the file extension at the end of the filename. However, in the info dialog box, it has:
Kind: QuickTime Movie
Dimensions: 720 x 480
Codecs: DV/DVCPRO - NTSC, Integer (Big Endian), Timecode
Channel Count: 2
Again, I'll look into the Log and Capture. Maybe it will be more efficient?
Thanks all!!

Similar Messages

Creating .pdf from a ppt or .doc in acrobat 9 resulting in strangely large file sizes

I am printing to .pdf from Microsoft Word and Powerpoint (previously Office 07 - now Office 10) and the file sizes are sometimes doubling in size. Also, for some larger documents, multiple .pdfs are generating as if acrobat is choosing where to cut off a document due to large file size and generating secondary, tertiary, etc., docs to continue the .pdf. The documents have placed images (excel charts, etc) but they are not enormous - that is until they are being generated into a .pdf. I had hoped that when i upgraded to Office 10, this issue would go away, but unfortunately, it hasn't. Any ideas? thoughts? Thanks so much!

One thing that can happen with MS Office applications when an image contains transparency is the "image" is actually composed of multiple one pixel images when converted to PDF. This could be confirmed by examining the file. Try selecting the images using the TouchUp Object tool to see if what looks like a single image it entirely selected.

How can I keep tabs on the file size when importing from the Event Library into a Project? I want to ensure the movie will fit onto a 4.7Gb disc?

How can I keep tabs on the file size when importing from the Event Library into a Project? I want to ensure the movie will fit onto a 4.7Gb disc?

iDVD does not care about file sizes, as it compresses the file to the standard DVD format of mpeg2.
It only cares about length i.e. max 2 hours including titles etc.
iDVD encoding settings:
http://docs.info.apple.com/article.html?path=iDVD/7.0/en/11417.html
Short version:
Best Performance is for videos of up to 60 minutes
Best Quality is for videos of up to 120 minutes
Professional Quality is also for up to 120 minutes but even higher quality (and takes much longer)
Professional Quality: The Professional Quality option uses advanced technology to encode your video, resulting in the best quality of video possible on your burned DVD. You can select this option regardless of your project’s duration (up to 2 hours of video for a single-layer disc and 4 hours for a double-layer disc). Because Professional Quality encoding is time-consuming (requiring about twice as much time to encode a project as the High Quality option, for example) choose it only if you are not concerned abo
In both cases the maximum length includes titles, transitions and effects etc. Allow about 15 minutes for these.
You can use the amount of video in your project as a rough determination of which method to choose. If your project has an hour or less of video (for a single-layer disc), choose Best Performance. If it has between 1 and 2 hours of video (for a single-layer disc), choose High Quality. If you want the best possible encoding quality for projects that are up to 2 hours (for a single-layer disc), choose Professional Quality. This option takes about twice as long as the High Quality option, so select it only if time is not an issue for you.
Use the Capacity meter in the Project Info window (choose Project > Project Info) to determine how many minutes of video your project contains.
NOTE: With the Best Performance setting, you can turn background encoding off by choosing Advanced > “Encode in Background.” The checkmark is removed to show it’s no longer selected. Turning off background encoding can help performance if your system seems sluggish.
And whilst checking these settings in iDVD Preferences, make sure that the settings for NTSC/PAL and DV/DV Widescreen are also what you want.
http://support.apple.com/kb/HT1502?viewlocale=en_US

Need to get large file sizes down to downloadable sizes-how?

I am using Compressor 4 and have several professional videos I produced with Final Cut Studio in QuickTime/.MOV format using ProRes 442. They are all 720p and of course, all have large file sizes. I needed to convert them so they are compatible with iTunes as well as Apple devices (AppleTV, iPad/iPod/iPhone, etc). They also need to be downloadable in a reasonable time and I of course want to maintain a quality image. Several of the videos are about an hour long, some a little more.
I an unable to get most of these files to be small enough for practical download and still maintain an acceptable quality. For example:
I have one video (QuickTime rendered from FCPS) that runs 54 minutes. 1280x720, ProRess 422, Linear PCM with a Bit rate of 72.662. The best I seem to be able to get out of compressor is to use the setting options for "HD for Apple Devices (5 Mbs)" which gives me a file that's just over 2Gb. Not bad, and the quality is still very good, but the file size is just too big for people to download. I get reports of people getting estimates of 77 hours to download this one file.
I did try using the setting under Video Sharing Services / Large 540p Video Sharing just to see what it would give me, but it really wasn't that much smaller and the quality was noticeably degraded.
I'm confused as to what to do about this. I have downloaded things from iTunes before that are good quality, about an hour and their file sizes are simply bnot this big.
Can anyone give me some advice? Thank you. Grateful for anything you can offer.
MC

If you're not concerned with precise average bitrate, use h.264 codec, set bitrate to "automatic" and use the quality slider. Be sure to have "keyframes" on "automatic"; every 24 frames or so makes h.264 quite inefficient and is only useful for live-streaming, where you want people to be able to resynchronise as quickly as possible. Having multi-pass enabled might help, but I'm not sure what it does when using constant-quality encoding.
Do a test-encoding of a representative clip of maybe about rwo minutes or so, play with the quality slider and see how far down you can go and still be satisfied with the quality. Using "automatic" bitrate uses as many bits to encode each frame as is necessary to get the required quality, and file sizes will vary depending on the type of material. Complex textures and high motion will use more bits, still frames and slow pans will use very little.
A light chroma-channel denoising may help improve perceived quality, as may very light sharpening in case you scaled down the material.
If you're still not happy with the bitrate vs. quality tradeoff, try reducing the resolution, but generally you should get 720p down to around 2.5 to 3.0 Mbps with adequate quality.
On the other hand, If someone needs 77 hours to download 2 GB, they have another problem anyway. That sounds like a 56k modem connection. What's he doing trying to download HD content anyway?
Bernd

Saving jpeg and png files large file size

Ive recently purchased web premium 5.5 and Im trying to save files in jpeg and png format in Photoshop and Im getting unexpectedly large file sizes, for example I save a simple logo image 246x48 which consists of only 3 basic colours and when I save it as a jpeg quality 11 it reports the file size in the finder as 61.6k, I save it as a png file and its 60.2k also I cropped the image to 190x48 and saved it as a png and the file size is actually larger at 61.9k saving as a jpeg at quality 7 the files size is a still relatively large 54k.
I have a similar png non indexed colour logo on my mac I saved in CS3 on a pc which is actually larger at 260x148 and it's only 17k and that logo is actually more complex with a gloss effect over part of it. Whats going on and how do I fix it, It's making Photoshop useless especially when saving for the web
Thanks

Thanks I had considered that but all my old files are reporting the correct files sizes I have been experimenting and fireworks saves the file at png 24 at 2.6k and jpegs at 5.1k, but I don't really want to have to save the files twice once cut from the comp in photoshop and again in fireworks juggling between the two applications is a bit inconvenient even with just one file but especially when you have potentially hundreds of files to save.
Ive also turned off icon and windows thumbnail in photoshop preferences and although this has decreased the file size they are still quite large at 27k and save for the web is better at 4k for the png and 16k for the jpeg. Is there anyway to get Fireworks file saving performance in Photoshop ? it seems strange that the compression in Photoshop would be second rate in comparison to fireworks given they are both developed by Adobe and Photoshop is Adobes primary image editing software.

My premiere project file size just went from 190MB to 5.61GB... and now it won't open! Anyone know how this happened?

My premiere project file size just went from 190MB to 5.61GB... and now it won't open! Anyone know how this happened? Or how to prevent it from happening again? Thankfully I saved a backup project of the 190MB file size.

warp stabiliser?

Video Stalls - Larger File Size

Just downloaded Battlestar Galactica season 2 and the video stalls at full screen. Do not have this problem with previous Battlestar Galactica shows and movies that I have downloaded in the past.
I notice the File Size and Total Bit Rate of the new shows are three times greater in size than the shows I've downloaded in the past.
Using the utility ativity monitor, I notice I'm maxing out my CPU when I go to full screen which I think is causing my video stall.
I also notice that now my previous TV show downloads don't fully fill my screen like that did before the new downloads.
I hope someone might know how I can get my TV shows back to working normal at full screen and why the new TV shows file sizes are larger than before.
Thanks for Your Help
Ricky
PowerBook G4 15" LCD 1.67GHz Mac OS X (10.3.9)

Thanks for the reply. Shortly after I posted, I started to relize that Apple was offering better TV Show quality which results in larger file sizes. I also went to my Energy Saver section in System Prefrences and found my Optimize Energy Settings was set for Presentations. I changed it to Highest Performance which resolved the issue.
iTunes 7.0.2
Quicktime 7.1.3
RAM 512MB
Thanks for your help.

Aperture is exporting large file size e.g. original image is 18.2MB and the exported version (TFF 16 Bit) is 47.9MB, any ideas please

Aperture is exporting large file size e.g. original image is 18.2MB and the exported version (TFF 16 Bit) is 47.9MB, any ideas please

Raws, even if not compressed, Sould be smaller than a 24-bit Tiff, since they have only one bitplane. My T3i shoots 14 bit 18MP raws and has a raw file size of 24.5 MB*. An uncompressed Tiff should have a size of 18 MP x 3 bytes per pixel or 54 MB.
*There must be some lossless compression going on since 18 MP times 1.75 bytes per pixel is 31.5MB for uncompressed raw.

Facebook application grow large file size

Why facebook applications grow larger and larger file size. What can I do. Since this program is to use the file size is big time. I use facebook version 4.0.3 on iphone4 run on iOS 5.0.1.
thank you.
Eak.

Most of the logs rotation for the different componets can be set in EM console but if you just want to do it with a cron or script here is what I have used in the past. Edit it to your needs.
#!/bin/sh
ORACLE_HOME=/home/oracle10FRS
apache_logs=$ORACLE_HOME/Apache/Apache/logs
webcache_logs=$ORACLE_HOME/webcache/logs
sysman_logs=$ORACLE_HOME/sysman/log
j2ee_logs=$ORACLE_HOME/j2ee/OC4J_BI_Forms/log/OC4J_BI_Forms_default_island_1
also_j2ee=$ORACLE_HOME/j2ee/home/log/home_default_island_1
max_size=1500000000
for file in `ls $apache_logs/*_log`
do
     size=`ls -l $file | awk '{print $5}'`
     echo "File $file is $size bytes"
     if [ "$size" -ge "$max_size" ]
     then
          echo "That's too big. Truncating"
          >$file
     fi
done
for wfile in `ls $webcache_logs/*_log`
do
     size=`ls -l $wfile | awk '{print $5}'`
     echo "File $wfile is $size bytes"
     if [ "$size" -ge "$max_size" ]
     then
          echo "That's too big. Truncating"
          >$wfile
     fi
done
for sfile in `ls $sysman_logs/*log`
do
     size=`ls -l $sfile | awk '{print $5}'`
     echo "File $sfile is $size bytes"
     if [ "$size" -ge "$max_size" ]
     then
          echo "That's too big. Truncating"
          >$sfile
     fi
done
for jfile in `ls $j2ee_logs/*.log`
do
     size=`ls -l $jfile | awk '{print $5}'`
     echo "File $jfile is $size bytes"
     if [ "$size" -ge "$max_size" ]
     then
          echo "That's too big. Truncating"
          >$jfile
     fi
done
for j2file in `ls $also_j2ee/*.log`
do
     size=`ls -l $j2file | awk '{print $5}'`
     echo "File $j2file is $size bytes"
     if [ "$size" -ge "$max_size" ]
     then
          echo "That's too big. Truncating"
          >$j2file
     fi
done

I need to update to the latest version of Snow Leapord-currently running v10.6. Because of where we live the slow download speed for such a large file has kept me from downloading the update. What can I do short of hooking up computer elsewhere?

I need to update to the latest version of Snow Leapord-currently running v10.6. Because of where we live the slow download speed for such a large file has kept me from downloading the update. What can I do short of hooking up computer elsewhere?

Do you ever visit a friend or realtive with a Mac who has faster internet? Maybe the local library has Macs on a fast line. If so, get a USB thumb drive and put this link on it from your computer:
http://support.apple.com/kb/DL1399
Then put this link on the drive:
http://support.apple.com/kb/DL1429
When you are at some place that has a Mac with a decent download speed. insert the thumb drive in that Mac and click on the first link ("DL1399") and direct the download to your thumb drive. Now do the same this with the second link.
The installer files will now be on the thumb drive and, when you get home, drag them from the thumb drive to your desktop. Install the Combo update first.

Does FW CS5 Mac crap out w large file sizes?

Does FW CS5 Mac crap out with large file sizes like CS4 did? It seems like files over a 4-5MB tend to be flaky... Is there an optimum file size? I'm running a Mac Tower 2.93 GHz Quad Core, w 8 GB RAM

Why not download the trial version and find out?

Is it possible to monitor audio through my mac while capturing from a tape in FCPX

Is it possible to monitor audio through my mac while capturing from a tape in FCPX?

I am sure that as you import a tape you will hear the audio as well as see the video.
Have you got FCP X?
If not, download the free 30 day trial.
http://www.apple.com/finalcutpro/trial/

Large PDF file sizes when exporting from InDesign

Hi,
I was wondering if anyone knew why some PDF file sizes are so large when exporting from ID.
I create black and white user manuals with ID CS3. We post these online, so I try to get the file size down as much as possible.
There is only one .psd image in each manual. The content does not have any photographs, just Illustrator .eps diagrams and line drawings. I am trying to figure out why some PDF file sizes are so large.
Also, why the file sizes are so different.
For example, I have one ID document that is 3MB.
Exporting it at the smallest file size, the PDF file comes out at 2MB.
Then I have another ID document that is 10MB.
Exporting to PDF is 2MB (the same size as the smaller ID document)... this one has many more .eps's in it and a lot more pages.
Then I have another one that the ID size is 8MB and the PDF is 6MBwhy is this one so much larger than the 10MB ID document?
Any ideas on why this is happening and/or how I can reduce the file size.
I've tried adjusting the export compression and other settings but that didn't work.
I also tried to reduce them after the fact in Acrobat to see what would happen, but it doesn't reduce it all that much.
Thanks for any help,
Cathy

> Though, the sizes of the .eps's are only about 100K to 200K in size and they are linked, not embedded.
But they're embedded in the PDF.
> It's just strange though because our marketing department as an 80 page full color catalog that, when exported it is only 5MB. Their ID document uses many very large .tif files. So, I am leaning toward it being an .eps/.ai issue??
Issue implies there's something wrong, but I think this is just the way
it's supposed to work.
Line drawings, while usually fairly compact, cannot be lossy compressed.
The marketing department, though, may compress their very large TIFF
files as much as they like (with a corresponding loss of quality). It's
entirely possible to compress bitmaps to a smaller size than the
drawings those bitmaps were made from. You could test this yourself.
Just open a few of your EPS drawings in Photoshop, save as TIFF, place
in ID, and try various downsampling schemes. If you downsample enough,
you'll get the size of the PDF below a PDF that uses the same graphics
as line drawing EPS files. But you may have to downsample them beyond
recognition...
Kenneth Benson
Pegasus Type, Inc.
www.pegtype.com

Is it best to upload HD movies from a camcorder to iMovie or iPhoto. iMovie gives the option for very large file sizes - presumably it is best to use this file size because the HD movie is then at its best quality?

Is it best to upload hd movie to iPhoto or iMovie? iMovie seems to store the movie in much larger files - presumably this is preferable as a larger file is better quality?

Generally it is if you're comparing identical compressors & resolutions but there's something else happening here. If you're worried about quality degrading; check the original file details on the camera (or card) either with Get Info or by opening in QuickTime and showing info. You should find the iPhoto version (reveal in a Finder) is a straight copy. You can't really increase image quality of a movie (barring a few tricks) by increasing file size but Apple editing products create a more "scrub-able" intermediate file which is quite large.
Good luck and happy editing.

Large file sizes in Captivate 4 to 5 conversion

I just upgraded from Captivate 4 to Captivate 5. When I open projects created in Captivate 4 and then resave them as Captivate 5 files (.cptx) the file sizes increase dramatically (e.g., 26,000 kb to 184,000 kb). I have deleted all unused objects and resaved, but the file sizes are still very large. Should I do something other than just opening them in Captivate 5?

Hi,
We are aware of this issue and I assure you that we are already working on a fix for this.
Will it be possible to share your Cp4 file with me? I would appreciate if you can mail it to me at 'thejas at adobe dot com'
Thanks,
Thejas

Crazy large file sizes on capturing from standard tape....

Similar Messages

Maybe you are looking for