Crazy little bug: audio inexplicably goes back to beginning

I imported a video clip from my Canon T3i in the standard .mov format with the audio recorded through a microphone onto the SD card in the camera.
I play the clip in Quicktime or other programs--no problems.
However, when I import the clip into Premiere Elements 10 about 2 minutes into the video the audio inexplicably restarts from the beginning. So, of course, everything is out of synch. Makes no sense.
I have tried to make a copy of the video clip and re-import that. I have restarted both Elements and my computer. I have tried to create a new project. I have made sure that the settings are correct--right video and audio settings...
I am at a loss. Thanks for any help.

Did you Copy over the full folder structure from your SD card? You will want to do that, and not just Copy over the media files. PrE (and PrPro) uses some of those other files.
Good luck,
Hunt

Similar Messages

Audio Recording problem when pause, goes back to beginning of recording

I audio recorded lecture. When I pause or stop, then resume, audio recording starts from the beginning instead of from where it was paused. WHY?

Did you Copy over the full folder structure from your SD card? You will want to do that, and not just Copy over the media files. PrE (and PrPro) uses some of those other files.
Good luck,
Hunt

Timeline playhead goes back to beginning when it hits end

Is there a preference or something somewhere I need to
turn off to prevent the playhead in the timeline from
going back to the beginning of the timeline and start
playing again from the beginning, after it plays through
the entire timeline once and it's the end?
Thanks.

Why not mark it as 'Answered' (which you should do anyway) then post what you did to fix it. That would help others who encounter the same problem.
Ctrl+L toggles timeline looping.
Andy
Quad 8GB. 250+500 HDs. G-Raid 1TB. NORTON. FCP 5.1.2. QT 7.1.3. Sony HVR Z1E Mac OS X (10.4.7)
"I've taught you all I know, and still you know nothing".

Stopping clip from going back to beginning

When I watch my video in canvas, instead of stopping at the end of the sequence, it goes back to the very beginning. I don't know how to turn this off. I want to keep the playhead at the end, so I can add more video to the sequence. Thanks

You don't add 2 video clips in the Canvas.
You either drag your clips straight from the Browser, Viewer or Canvas into the Timeline.

Encore CS4 Loop Point goes back to beginning

Hi all,
Thank you for your time reading this. I've searched the forum and didn't see a resolution for this type of issue. Please accept my apology if it is noted somewhere and I didn't find it.
I created a Motion Menu in After Effects CS3 that is 00;05;07;00
I then saved the layers as a psd files (I didn't create buttons within AE)
I created the buttons I wanted within Encore.
Turned off all of the layers in Encore except for the buttons that I created
I created an AVI file out of the After Effects composition which is set as the Motion menu in Encore
The only problem that I am having is that when the video ends it goes back to the very beginning of the motion menu instead of the Loop point I set at 00;00;14;00 (14 seconds if I did that right)
I have Animate buttons checked
Loop point: 00;00;14;00
Loop #: Forever
On the basic tab, for both End Action and Override I went to Specify link and chose the Motion menu(AVI) that I created. I checked the box at the bottom "Set to Loop Point"
I'm not really sure what I'm doing wrong. This is my first time with a Motion Menu, so I'm sure I'm doing something wrong.
Thank you for your time on this
Best regards
Jeff

Jeff,
Thanks for explaining.
I'm now using CS5 and I'd heard the two menu thing wasn't necessary any more so:
A week or so ago, I was trying to figure out the same thing. I posted this question here http://forums.adobe.com/thread/852185?tstart=30.
Unfortunately, there were no answers, and by then I had found in the Encore Help under Loop point (as you did) this group of instructions at the bottom
"Set menu loop back
You can set a loop point in a motion menu to a point from which you want the motion menu to loop, rather than the beginning. This is useful when the starting point and ending point of the motion menu are separated by a long interval.
Select the menu from the Menu panel.
On the Properties panel, set the loop point.
Select Specify Link from the End Action Options menu.
Select the target from the list, and then select Set To Loop Point, and click OK"
However, I can't get this to work similar to you problem. That is, if I select the "Play all, Scenes " menu as the target, since it has a motion menu, I can select "Set to loop point", since it's not greyed out.
However, if I select the next menu "Scenes" with no motion menu, the "set to loop point" is greyed out. If I select the Play all etc with the motion menu, then the loop point doesn't work ie it still loops back to the beginning of the motion menu.
I'm not sure what the work "taget" means from the last sentence in the suggestions.
I was hoping an Adobe person would chime in, but so far no luck.
I'm doing this in a SD project and not BluRay.
Sorry to ramble.
John

Audio when going back

I have advanced actions set-up on my slide that if you click a link the current audio stops and a callout appears with that audio. It works just great if I am playing just forward BUT if I rewind/go back it doesnt stop the audio and will play the audio from the callout and the audio from the slide I went back to. How do I prevent this please. Thank you

If you are changing the content of a slide, which you are doing by advanced actions, and you allow to navigate back to that slide, the only way to be sure that everything works as expected is to 'reset' the original content, situation of the slide by using an Advanced Action ON ENTER for that slide. Example: if you are showing objects that were hidden, you have to be sure they are hidden when re-entering the slide on navigating back.
However when providing a default playbar, the user can also navigate by scrubbing the progress bar, instead of using the Back button. In that case you are never sure where the user will be navigating to, it can be in the middle of a slide and in that case the On Enter slide event will not occur, and the 'reset' action will not be executed. That is when you get into problems. Example: a slide start with frame 210 and ends with frame 300. When using the back button, the first frame 210 will be visited and the On Enter action will occur. But when the user scrubs to frame 220, this will not happen.

Is there a way to prevent store from going back to beginning when browsing aps

I'm on an ipad2. When I browse a category in the app store and find something I would like to know more about, I tap on it and it brings me to the detailed page. After viewing the information I want to go back to the list of apps. When I do it takes me back to the beginning of the category at app number one, I then have to go thru. Page after page to get back to where I was previously, if I'm on app 556 of 3456. You can see that it would take a while. Is there a way I'm missing to take me back to where I left off?

When you connect the device open iTunes and select it from the sidebar. Click on the Summary tab in the main window. Uncheck the option to automatically connect to iTunes. You will find it in the collection of options near the lower part of the window.

Shuffle goes back to begining when switched off

Is this the norm? My shuffle doesn't remember where it was on the play list when it is switched off and on again, unless it is on shuffle. It returns to the begining of the play list each time. Also on shuffle it doesn't play the whole play list and seem to be in a 'loop'.

I have the same problem. everytime when I switch my ipod off an on again it starts at the beginning and not at the song i've heard befor. I have also restartet and restored my ipod yet, but also this don't work. I also do not press pause befor switching off my ipod, but all this does not help. do you have any other solutions?

None of the apps I downloaded are opening. The screen just flashes a little, and goes back to the home screen,

None of the apps I downloaded are opening. The screen just flashes a little, and goes back to the home screen,

Try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. The screen will go blank and then power ON again in the normal way.] It is 'appsolutely' safe!

X-Fi Xtreme Audio - Volume goes low, static, then comes back.

Hi all, I have a problem that just developed with my sound after 3 years of owning this PC. Is this the infamous static problem with the card or something else I can fix? Thanks.
I was playing a game the other day when the sound 'cut out'. If I turn the volume on my speakers up louder I can sometimes hear what should be playing, it's very quiet and sometimes distorted. There is also a loud hiss and static when the volume is at standard levels whilst the sound is doing this. Sometimes I can't hear anything if I turn it right up even, it's just the static.
There have been the odd pop, crackle and even strange noise coming from it on occasion over the last few days.
After a while it just decides to go back to normal and will work for a while and then do the same thing again. Will happen when playing games or even just on the desktop (listening to music to test this)
I have unplugged my speakers (2 desk speakers with subwoofer) and put headphones in, they are doing exactly the same thing so it is not the speakers.
I have updated the drivers. No change.
I'm baffled. Sometimes even restarted the computer doesn't fix it, it just decides to work again.
It's almost like it's getting inteference or picking up a staticy radio, and then cuts out again, but obviously i know that's not what it's doing.
Any solutions or am I looking at buying a new sound card here?
I'm not using two gfx cards, and the mobo is ASUS p5n-e sli. I have an Nvidia Geforce 8800 GTS gfx card.
Any other info you need let me know, thanks in advance.
Oh and I believe it's in PCI. Not PCI-E.

@Re: X-Fi Xtreme Audio - Volume goes low, static, then comes backu Hi
Did anyone solve this - I have started getting exactly the same problem today. There is a fairly loud pop and then the sound that normally should be coming form the machine (game or music) is very quiet and distorted. After a short while (a few minutes), it pops again and starts working again. I built this machine a few months ago and this is the first time that I have had this issue. The specs are as follows:
XFX ATI Radeon HD 5870
Asus P6X58D Premium Intel X58 Motherboard,
Intel Core i7 920 D0 Stepping 2.66Ghz (Nehalem)
Corsair XMS3 6GB (3x2GB) DDR3 PC3-2800C9 (600MHz) Tri-Channel
Hitachi Deskstar 7K2000 2TB HD
Intel X25-M Mainstream 80GB SSHD
X-Fi Fatalty FPS
The X-Fi card is from my old machine and it worked perfectly in that one.
Many thanks,
Dave

My iPad suddenly started to show crazy colors. I turned it off and had to use the two button trick to turn it back on. Now it shows only green stripes for a few seconds and goes back to sleep.

My iPad suddenly started to show crazy colors. I turned it off. It would not reboot until I used the two-button reboot. Now it shows only green stripes. only for a few seconds and goes back to sleep. HELP!

Standard troubleshooting...
1. Try a Restart by pressing the sleep/lock button until you see the slider. Slide to power off. Restart by pressing the sleep/lock button until you see the Apple logo.
2. Try a Reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider if, it comes up. Takes about 5-15 secs of button holding and you won't lose any data or settings.
3. Remove all apps from Recently Used list...
- From any Home Screen, double tap the home button to bring up the Recents List
- Tap and hold any icon in this list until they wiggle
- Press the red to delete all apps from this list.
- Press the home button twice when done.
4. If still a problem restore with your backup.
5. If still a problem restore as new, i.e. without your backup. See how it runs with nothing synced to it.
6. If still a problem, it's likely a hardware issue.

MMy iPhone 4s is struggling to send messages and dial out.. service is going back and forth between Verizon with a little circle, Roaming, and No Service.. Best fix for this problem..? Thanks

My iPhone 4s is struggling to send messages and dial out.. Service is going back and forth between Verizon (with a little circle), Roaming, and No Service.. Best fix for the problem..?
Thanks

My iPhone 4s is struggling to send messages and dial out.. Service is going back and forth between Verizon (with a little circle), Roaming, and No Service.. Best fix for the problem..?
Thanks

Nokia N8 - Little Bugs

I know everyone has different things going on with their wonderful N8's frm like little bugs as i would like to put it...I recently received my Nokia N8 and i will say that i am happy with what i have accept for the fact that their are a few little things that i come across that irritate me sometimes. Now i know some people might dissagree but i will say this everyone that owns the phone is having some lil problem..
Firmware Upgrade Suggestions:
1). When double tapping on image in the photoviewer..(After tapping to zoom in the Screen goes blank..
2).Please add a feature to add album art in the N8 like the N95 and 5800.
3). Sometimes during texting or even just browsing the web - the phone goes back to the home menu out of nowhere (and yess my fingers are nowhere near the exit or home button)
4). Can you make an app for Facebook so that we dont have to log in first through OVI....
5). Video loading during playback....Please fix that
6). When in the music library i click the option GO TO MUSIC STORE (it just takes me back to the home screen)
7). Can add back Video Ringtones... I miss those
8). I dont like the lagg of 2 sec when tryting to go through the menu (and yess i have all applications closed)
Thats all thanks

I am unable to replicate the blank screen fault when double tapping 12mp images on my '3' UK dark grey N8. Maybe try saving to the memory card instead of internal memory?? Also there is no 2 second delay in the menu on mine or videos stopping, be sure not to close the menu and it comes up instantly! There must be something different about the 3 branded firmware, I can't find many glitches!!

Keeps going back to the finder when in Firefox and other applications

My finder keeps on going back to it when I am in other applications. The applications keep running, but are gray out and I have to click back on the page somewhere to get the application to the front again. I recently updated all my programs and applications such as itunes, etc. Please help, this is driving me crazy! I had to bring back the firefox twice just typing this little bit.

Ok, I'm pulling this one out of memory, but if you go into your system preferences, there should be one in there for Stuffit, or something of that nature. You can turn it off in there. After you've turned off the Stuffit engine, restart your computer. That should clear up your problem.

Imac goes back to password request screen

imac goes back to password request screen over and over again after an upgrade notification " CS5 Service Manager needs Java 6 " . This happened yesterday after running a software upgrade, somehow after so many tries and repairing disk, using RP, etc it started to work. TODAY, another software upgrade with a "malware removal' file came and I thought Apple had found and solved the problem....WRONG I went to the same stae again....going crazy....please help. Thank you

Hi Mauricio,
I remember a sim. problem on MacOS 10.6. I remember that by then it was Firefox which needed to be upgraded to use the systems JRE (Java Resource Engine) instead of some other floating around on the OS. Maybe the conclusions drawn in the thread (external link) can help you, as this sounds a little like your problem: http://forums.macrumors.com/showthread.php?t=1153590
Furthermore, I urgently advice you to scan your computer for viruses and malware programs. MacScan is offering a trial mode, where you can do this for free. Hope that helped.

Crazy little bug: audio inexplicably goes back to beginning

Similar Messages

Maybe you are looking for