Crazy Question: Could you run FCS2 on a Macbook Air?

Looking at minimum system requirements for FCS2, and the specs on the macbook Air, I was wondering... would it be possible to run FCS on an Air? From a practicality perspective probably not the most sensible thing to do, but would it work? The only thing I see as an issue is the requirement for the AGP or PCI Express graphics card. The Air has no firewire port, but if you're editing offline media you cold be working off USB2 (I've used my 30GB iPod as an external HD in a couple of situations). No way to digitize material though, would there?
I have no plans to do this, just morbidly curios.

Mike pulls it apart pretty well but its all from a very elitist point of view ... not that I disagree with him per se, but if I were playing devils advocate ...
Processor: While that is faster than some of the G5s shipped a few years ago, and plenty fast enough to cut most formats, that is still pretty poky these days.
why add the caveat? the first part "plenty fast enough to cut most formats" says it all.
RAM: The default RAM config is 2GB - not bad... you can’t add any more. 4GB is my usual dead minimum
just because 4GB is a good recommendation its far from required. in fact FCP runs fine on even less than Apples own recommended minimum of 2GB. (of course "fine" in this context is subjective!)
*Hard drive/storage options:* If you were to install the full Final Cut Studio 2 suite, you’d have installed 55GB of goodies, leaving you with precious little room ...
if we're looking at a base FCS install not a full content install then theres plenty of room on the drive for the apps only. the real issue is media storage, and oh my goodness, I remember getting my first 15GB drive (got two of them, cost me an arm and a leg) and I thought I had all the storage I'd ever need. of course this does present the issue of less than perfect performance with media, apps and OS all on the same drive ... but performance is relative if you're looking for an offline / low data rate edit system it will be fine. (we're not looking at this as a "primary" edit system right?)
GPU: This is a serious limitation ... But for some simple editing, this is survivable
No contest on this one
FireWire? :No FireWire, anywhere.
Bummer ... although many newer cameras connect via USB
*USB 2.0*: you could attach a USB 2.0 drive for additional storage, right?
Yes you could, so once again, no need for the further (dis)qualifications. You could also import from one of them swanky new Sony EX1's, or from Sony's U1 XDCAM drive Pretty nifty. The MB Air should be able to handle cutting with these low datarate codecs without any problem...or if you're into hoops then you could use it as a field unit to cut with the low res proxies from these cams.
Expansion?: Powerbooks had the older slot that gave them P2 compatibility. MacBook Pros have the newer slot, compatible with the newer SxS cards used with Sony’s very promising XDCAM EX camera, the EX1. This Mac has neither option - again, no way to import footage.
See *USB 2.0*
Battery: ...You MUST plug into a wall to recharge...
90% of field work is done plugged into a socket, in a hotel room or maybe in the back of a car running from the cigarette lighter
Ethernet and 3G
mostly irrelevant

Similar Messages

  • Hello.I forgot the answer of my apple IDs security questions.Could you recover it for me?

    Hello.I forgot the answer of my apple IDs security questions.Could you recover it for me?

    Everyone here is just a fellow user, so no one here recover or reset your questions. See the information below.
    How to reset your Apple ID security questions
    Go to appleid.apple.com and click on the blue button that says 'Manage Your Apple ID'.
    Log in with your Apple ID and password. If you have forgotten your Apple ID password, go to iforgot.apple.com first to reset your password with a password recovery email.
    Go to the Password & Security section on the left side. Then underneath the security questions click on the link that says 'Forgot your answers? Send reset security info email to [email]'.  This will generate an automated e-mail that will allow you to reset your security questions. 
    If that doesn't work, or  there is no rescue email link available, then:
    click on 'Temporary Support PIN' that is in the bottom left side, and generate a 4-digit PIN for the Apple Account Security Advisor you will be contacting later.  
    Next, go to getsupport.apple.com. If you see a message that says 'There are no products registered to this Apple ID, simply click on 'See all products and services'.
    Choose 'More Products & Services', then 'Apple ID'.
    A new page will open.  Choose 'Other Apple ID Topics', then 'Forgotten Apple ID Security Questions'.
    Click the blue 'Continue' button.
    Select the contact option that suits your needs best.
    The above information quoted with gratitude from TJBUSMC1973, another user in these forums.
    Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Communities page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums and in the Apple Knowledge Base before you post a question.
    Regards.

  • I cant buy game in apple store because im forget the security question could you send link to reset for me?

    Dear sir
    I cant buy game in apple store because im forget the security question could you send link to reset for me?
    <Email Edited by Host>

    Forgotten Security Questions / Answers...
    See Here > Apple ID: Contacting Apple for help with Apple ID account security
              Ask to speak with the Account Security Team...
    Or Email Here  >  Apple  Support  iTunes Store  Contact
    More Info >  Apple ID: All about Apple ID security questions
    Note:
    You can only set up and/or change a Rescue Email BEFORE you forget the questions/answers.

  • HT5312 Dear I forget my security questions , could you please guide me

    Dear I forget my security questions , could you please guide me

    Contact Apple through iTunes Store Support, and explain that you have forgotten your 3 security questions, that you can reset your password, but doing so doesn't reset your security questions.
    Explain that after resetting your password, you are still asked for the answers you have forgotten, before you can gain access to My Apple ID > Manage your account > Password & security, which is where you need to be to change your answers.
    Remember, support will receive hundreds, if not thousands of requests per day, some from people trying it on, others with little explanation and others that are written extremely poorly. Take the time to explain your situation properly, be precise and concise, brief but comprehensive.

  • HT201628 I tried following the steps in this article. When I attempt to delete iTunes,  it says "iTunes" can't be modified or deleted because it's required by Mac OS X. What other steps could I take to get my MacBook Air to recognize my iphone again?

    I tried following the steps in this article. When I attempt to delete iTunes,  it says “iTunes” can’t be modified or deleted because it’s required by Mac OS X. What other steps could I take to get my MacBook Air to recognize my iphone again? Neither iTunes nor iPhoto recognize my phone any longer.

    iTunes can't be deleted because it comes with OS X. In order to delete it, open Terminal and copy:
    sudo rm /Applications/iTunes.app
    This will remove iTunes, so then you can reinstall iTunes

  • Will cs5 run on the new macbook air?

    The new macbook air has no hard drive, but instead an internal 128gb flash drive attached directly to the motherboard. It uses the OSX platform. Will the air run cs5?
    Thanks!
    Andrew

    Andrew,
    Sorry to be late in replying but I can assure you that CS5 is running great on the MacBook Air 11" with no issues.
    MW

  • Can Final Cut Pro 7 be run on the New MacBook Air

    Can Final Cut Pro 7 be run on the New MacBook Air (just for looking at footage and assembling a rough cut) or is the graphics processing inadequate? Also wondering the same about Photoshop CS5 and Aperture 3.1.3.
    Thanks,
    Kevin

    You can install on (1) Tower and (1) Laptop, as long as they are both used by you, and NOT at the same time.  This is for when you edit on your tower, but then need to edit at home, or on the road.  You cannot use one copy of FCP on multiple machines at the same time.  You need one copy for each machine you intend to use at the same time.

  • Will FCPX run on an 11" Macbook Air?

    Will FCPX run on an 11" Macbook Air?

    Well, call me foolish but I'm attempting to run FCP X on an 11-inch Mac Air attached to a Thunderbolt display with FCP X's Project and Event folders on a 4TB G-RAID Thunderbolt external drive. So far, it is not a good experience. Just to mount and scrub through a project already underway (a several-minute, 720p video with simple transitions) produces the dreaded spinning beach ball of death on a regular basis. I honestly don't know if my Air's 1.8 GHz CPU simply isn't robust enough to handle high definition video or if it's a Thunderbolt issue. My plan was to use the Air to work on simple projects when traveling. I can get everything loaded into the timeline and it will play for a minute or so, then it stops and the beach ball begins to spin. Several minutes later, things seem to break free and the show again plays, but soon stops again. I've got a feeling I'm asking the CPU to do too much -- but it's worth trying. I assumed that heavy duty rendering might stress the system but the struggle just to play back the timeline is a surprise.
    Has anyone out there had success?

  • If you already bought the windows version of office (Microsoft, Powerpoint...) can you run it on the macbook pro? Please help.

    Can you run the windows version of Office 2010 on a macbook pro? please answer back.

    Yes, if you use Boot Camp to run Windows on your Mac, Microsoft Office 2010 will be able to run without any issues. If you want to run Microsoft Office from within Mac OS X, you would need to purchase Microsoft Office for Mac.
    Hope that helps, have a great day.

  • Running Adobe products on Macbook Air

    Hello,
    I am currently looking into purchasing a Macbook laptop which will be used for my home business as a Graphic Designer, primarily using Photoshop, Illustrator, Indesign and Dreamweaver, which I will be getting through Adobe's new Creative Cloud. I am a long time PC/Unix user and somewhat new to the Mac world, so pardon my ignorance.
    I was strongly considering buying the new Macbook Pro Retina, however with such a big price tag, I decided to explore my options more and upon closer inspection I see that the technical specifications between the Retina and the Air do not appear to be drastically different? The main differences seem to be that the retina has
    -NVIDIA GeForce GT 650M with 1GB of GDDR5 memory and automatic graphics switching)
    and supports higher resolutions.
    Portability is a big factor to me, the Air and the Retina have a nice weight, that is why I am less interested in the older Macbook Pros.
    I am just wondering if there are any Graphic Designers out there who are doing their work on Macbook Airs? Have you encountered any problems? If so, what?
    The difference in cost is quite a lot, this whole term of Macbook Pro is confusing me a bit, when I look at what is under the hood.
    Any info, answers or advice is greatly appreciated.
    Thank you.

    I am a lot further after watching some videos on YouTube. Thanks for the hint.
    But there are still some open questions which I could not fins an answer to.
    For example if I can access my files from both of the operate systems.
    When I run Windows do I have access f..e. to the photos on the Mac Partition? If this is not possible is there a solution of making a common partiion for files which are used on both systems?
    For me it's an attempt using the Mac OS. Without the background of my Windows system I wouldn't try it.
    There are too many programs I have to use which are not Mac compatible. But I am courious finding out about the Mac System as well to know what people talking about. With this having both systems on my machine I would be able to learn to know Mac without being without Windows.
    I think I will definatley wait until the new MacBooks are coming out with stronger processors as I think for a dual system I can't have enough ower.
    Thanks for your help.
    Kattinka

  • How do you install Windows 7 on Macbook Air with a Windows 7 ISO image?

    Macbook Airs have no optical drives, and I can't buy one. I do, however, have the Windows 7 ISO image. And I also have access to a Windows 7 PC. I found an article on CNET on installing from a Flash Drive, but that requires the CD. I also have a hard drive (120GB) and Flash USB (4GB), if they could help. Please help me as many programs I am familiar with are only windows-based. I am tried using open-source software like Wineskin Winery and WineBottler, but to no avail, I always end up confused with them.Please help me.

    Acius wrote:
    Crjohnson, I think you can really help me!
    Okay, how do you use Wine? I don't want to install lots of software like MacPorts, just want the minimal software. So there are many things like Wine, WineBottler, and Wineskin Winery. What do I use for what? For example, I want to turn a windows game (Age of Empires 2 for example) into a full Mac App. How would I go about this?
    I tried researching but it is so in-depth with terminal commands and all(i dont want to risk ruining my computer)
    What is crossover? Is it another wine app?
    Oh, and I tried Winery Wineskin...why doesn't it work? It keeps installing random things like Gecko, or Mono, but in the end, it doesn't work. Do I need the windows app's executable, or the window's apps's installation executable??
    What are engines, and how many do I need to create? I think the best thing for me is to learn wine, because installing windows with bootcamp isn't worth the effort, I think, with me having only a few apps i need to run.
    As for learning mac apps only, well, Windows apps dominate the market with most of applications being made for windows, especially games, with 90% market. So for some apps, there just isn't a mac version available, or if there is, it's costly. (Which you already know I can't buy things)
    You probably cannot afford to buy Crossover either.  It is designed for user friendliness though, but of course Wine cannot run everything.
    Yes you have to learn some things to use Wineskin.  Normally on Gecko and Mono prompt, just cancel them.  Gecko is needed if you have a program using mshtml (its basically a replacement for Internet Explorer for programs that use parts of it).  Mono is a replacement for .NET if your program requires that.  You do not want to install them if you don't need them as they will just waste space.  You can always refresh the wrapper later on and get the same prompts if you find out you need them later.
    You can copy the full installed version of a game inside the Wineskin wrapper and try to set it up that way, but its usually easier to just run the installer and install it inside the wrapper just like you'd install it in Windows.
    An Engine is something you download... its basically a specific Wine build made for a Wineskin wrapper.
    If you do not want to learn Wineskin enough to get in and port your programs yourself, you can often find other people who have done so (at least with games).
    Check out sites like PaulTheTall.com who has tons of Wineskin wrappers already made and ready to go for many games... you just download the wrapper, install the game you want in it using the normal Installer, then its ready to go.  Many you'll need to manually update yourself to Wineskin 2.5.8 though since all the older versions broke ok the OS X 10.8.2 and 10.7.5 update, and Paul hasn't gotten to all of them yet since he has hundreds (including AoE 2 i think).
    There is also Portingteam.com which has tons of pre-made wrappers for games (Including Cider hacks from official games).
    If your talking about non-Game apps though, you can normally find an alternative... many of which are free.

  • Safari won't run on multiple 2013 Macbook Airs

    Hi, I purchased a 2013 MBA on Saturday.  When I got home and fired it up I discovered Safari would crash in seconds.  Couple of hours talking to Applecare but nothing worked.  I went back to the store on Sunday (an hour away) and exchanged it.  That new MBA also couldn't run Safari.  The tech opened a third computer with a different number sequence and it too could not run Safari.  They put google on so I'd have a browser.  I'm debating whether to return the computer though concerned that I'm stuck with tech that is going to have a long running problem as I've been completely unable to find any mention of others having this issue and fixing it.  The fact that 3 brand new computers in a row had the same issue makes me wonder if anyone else has found this and discovered a fix for it yet? Suggestions? Thanks!

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    Still in the Console window, look under User Diagnostic Reports for crash reports related to the process. The report name starts with the name of the crashed process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

  • I'm running firefox on a Macbook Air 10.6.8, and the bookmark folders in the bookmarks drop down menu don't open when I mouse over them or click on them. How do I fix this?

    I've run diagnostics on the mac air, reloaded firefox, and tried eerything I could think of. The 'show all bookmarks' page works perfectly- it's just the dropdown menu that has problems. All the folders have numerous items in them except for one- which only has two. That one works- the pop out menu for that folder comes out on the left side. All the arrows for the folders are on the right side (pointing right) of the of the drop down bookmark menu, pointing at the right edge of the computer screen. The dropdown menu appears on the right half of the screen, close to the edge. Strangely, my main computer is an iMac desktop, and my mozilla bookmarks dropdown menu folders open on top of the dropdown menu, not out on the side.

    I figgered it out. The resolution of the screen was set at 600x800, so the bookmarks dropdown menu took up more space than usual. The pop out folder contents didn't have enough room to pop out. With a resolution for a slightly smaller display the drop down bookmarks menu functions perfectly.

  • How to run windows-xp in MacBook Air?

    How to run windows-xp in my MacBook Air?

    If running Lion only Windows 7. You would need a first generation MBA to run an earlier version of Windows.

  • Can you add RAM to 2GB MacBook Air after purchase?

    I'm thinking of getting a Macbook Air. Money is tight and 2GB RAM is cheaper than 4GB. If you purchase a 2GB MacBook Air, can you later add more RAM?

    Depending on what you are planning to use the system for, adding more RAM may not be an issue. The current 11" entry-level MBA is a capable system which would only really begin to bog down if you were intent on running a number of applications at the same time. While 2Gb RAM is really the minimum for running Lion efficiently, the use of an SSD rather than traditional hard drive actually helps keep performance levels up, even when the system has to use virtual memory.
    To my mind, for the average user, the 60Gb drive is more of a limiting factor.

Maybe you are looking for

  • GL Posting using BAPI BAPI_ACC_DOCUMENT_POST but not updating in table BSEG

    Hi Experts, Hope all are doing greatu2026 I need you help to resolve the below issue. We have on Z-Tcode to GL Posting the document using BAPI u2018BAPI_ACC_DOCUMENT_POST' and this program is successfully posted from the source file and documnet # al

  • Problems With iTunes Locking Up!!!!!!!!!!!!!!!!!!???????????

    Can someone please help me out? I have about 95 Gig of music in my iTunes on my computer. None of the songs in my itunes are backed up!!! Everytime I open itunes after about a minute of being open it locks up my whole computer and the only thing that

  • Table Balance Carry Forward per Trading Partners

    Dear all, Currently, I need to build a report that list detail Trading Partners per G/L Account transactions and per equity type also. But I have a problem in retrieving amount Balance Carry Forward per Trading Partners. I have checked through Table

  • Fieldcat in ALV OOPS

    Hi All, Can any one let me know how to build fieldcat for ALV using OOPS. thanks. Khan

  • Oracle 10g EM을 띄우면 리스너,DB 모두 죽어있는거로 나옵니다.

    Solaris 9에 Oracle 10.2.0.3을 설치하여 운영하는데 PC에서 Enterprise Manager를 띄우면 리스너,DB 모두 죽어있는걸로 나옵니다. ORA-12541: TNS:no listener (DBD ERROR: OCIServerAttach) 직접 접속하여 확인해보면 정상적으로 Oracle 기동이 되어있으며 리스너도 정상 기동되어있습니다. 또한 아래와 같이 oem도 정상 running 되어있는것을 확인할 수 있구요.. $ e