Crazy upload problem with Ipod Video

I have an Ipod Video 60gb that I've had no trouble with for a month. Suddenly, when I connect with Itunes to upload music, Itunes identifies the Ipod as having 190gb with 130-150gb already full. This is despite the fact that I've just restored my operating system on the Ipod and wiped it clean with Ipod Updater (6-28-06). Another interesting this is that after restoring the operating system, Itunes still knows the name of the Ipod and has a song list already attributed to it (on the Ipod view in Itunes) as if I've already got music on there. When I restored with Ipod Updater, it also thought I had 190gb. Itunes does the sync process and finishes normally, but there are no songs on the Ipod when it finishes. It's almost like there's two partitions on the Ipod and I can only see one of them. Crazy! Any thoughts?

Go to the video settings (iPod nano) and turn off fit to screen.
Click to download iPod nano (5th generation) - User Guide
Message was edited by: David M Brewer

Similar Messages

  • Syncing/Charging Problem with iPod Video 5G

    I am experiencing a problem with my iPod Video 5G. When pressing the center button of the device, the apple logo appears. But before it completely starts up, it dies, leaving the screen with a faint apple logo and some lines. When I plug the iPod into my PC, a screen is displayed saying "Please Wait, Very Low battery." After a while, it restarts, and fully comes on, displaying the "Do Not Remove" screen. But a message shows up saying "No Battery Power Remains. Connect iPod to Computer". However, the battery meter in the top right hand corner shows a a completely charged battery. Also, it starts to beep. The iPod briefly shows up in iTunes, but then it shuts off, displaying a "very low battery" message again, and an error message comes up in iTunes. This whole process keeps repeating over again. This all came up out of no where, as I had used the iPod a few hours before this started. I have no idea what's wrong with it. Could it be the battery? Or the hard drive? I would appreciate any help greatly.

    Go to the video settings (iPod nano) and turn off fit to screen.
    Click to download iPod nano (5th generation) - User Guide
    Message was edited by: David M Brewer

  • Problem with iPod video playback

    I have a problem with some of my movies' playbacks on my Nano 5g. Though working perfectly fine on both my computer, and my iPod video, on my Nano some videos are slightly cut off on the right of the screen, I'm missing about 10% of the video due to the cut off. Though technically I should still be able to watch the movies fine, it niggles me and inhibits my full enjoyment of the videos. Is there any way I can crop or rescale the movie so it will fit properly on my screen? Thanks
    (I have already tried both wide screen and scale to screen size on the iPod)

    Go to the video settings (iPod nano) and turn off fit to screen.
    Click to download iPod nano (5th generation) - User Guide
    Message was edited by: David M Brewer

  • Problem with iPod Video (30gb) since update

    Hi all.
    I, today have had a slight problem with the iPod updater on my iPod Video. I have installed the newest version of itunes (6.0.2 I think), which prompted me to install the newest iPod updater with it, I downloaded that and installed it. After installing I ran the updater, it began to finish the installation and my computer froze (I'm using a new hard drive in my computer and found out thats the problem). My iPod, now, when I turn it on has a blank white screen, I've tried the resetting method (toggle hold, then hold menu and select 6 - 10 seconds) and the light goes away, the ipod beeps 3 times and the white screen comes back. Can anybody please help me? I have tried running the installer again and it just freezes, and when the iPod is plugged into the pc itunes doesn't start, how I had it configured.
    Please help!!
    Apreciated - Sam.
    * I have also browsed the whole website thoroughly and found nothing. I have also tried google, and found nothing relating to my problem *

    I am leaving soon on a trip and would really appreciate any help on this. Thanks

  • Many Problems With Ipod Video--Corrupt Hard Drive?

    Hello,
    I got this iPod 30 GB the christmas of 2005. Ever since a few weeks ago, my iPod started giving me my corrupt messages, so then, I kept restoring and it was fine. This again happened to me recently and haven't resolved it yet. So here is my story:
    I did the 5R's = Nothing
    I renamed it later in the alphabet = Nothing.
    I also must add that I have plugged it in and when I go to 'my computer' to try and format like others said, it freezes; on the 'my computer' & 'iTunes'. I really hope you guys can help me.
    I also noticed when I was looking at the about section on my iPod, it says my capacity is like 27.8 GB and available is 10.4 GB, so I don't know if that will help.
    I really don't want to buy a new one and hopefully you guys can help me out. Thanks in advance.
    Gateway MX6124   Windows XP   iPod Video 30GB - 5th Gen

    No problem. Have you tried this iPod on another computer?
    Also, while everything else is disconnected, connect your iPod and force it into disk mode. If your computer can see it, reformat your iPod (FAT32, not a quick format) and then give it a drive letter of M or P.
    Disconnect the iPod and reload the USB Driver:http://docs.info.apple.com/article.html?artnum=305136
    Pay attention to the last item in the article, and reload the USB driver even if no new ones are available for your computer.
    Reconnect your iPod and see if you can Restore it.

  • Problem with iPod Video 30GB

    When i woke up today my ipod had a weird problem. it just stays on the "bootscreen" with the apple logo.it wont reboot , and PC wont respond to it , i have no idea what is going on with it

    See if these help.
    iPod shows only an Apple logo and doesn't start up.
    Only the Apple logo appears when turned on.

  • Sync problem with iPod Video U2

    Since upgrading to 7.5, iTunes doesn't sync my iPod anymore: as soon as I plug my iPod, iTunes recognizes it, but there is no sync because iPod immediately disconnects. I cannot choose 'manual sync' or 'enable disk mode' because this happens after very few seconds. Why???

    Try restoring your iPod. Restoring will erase the iPod's hard drive, reload the software and put it back to default settings. Once the restore is complete follow the on screen instructions and it should connect to iTunes and give you a prompt to automatically update your library onto the fresh installation. If you want to update manually or using selected playlists choose no and it will default to manual mode and enable the iPod for disk use. From there you can choose whatever setting you like: Restoring iPod to factory settings with iTunes 7

  • Problems with ipod connection.

    Problems with ipod connection.
    I have problems to connect my ipod to computer windows 7.
    When I connect I get the following error:
    "We encountered an ipod, but could not be identified correctly. Disconnect and reconnect the ipod and try again."
    And it recognizes the ipod when trying to go play music or videos make me the following error:
    "Error while trying to copy on disk. The device is not connected."
    I've uninstalled all apple applications and re-installing, as I formatted the ipod and continues to set the same error.
    What else can I do?

    Hello,
    While your symptoms don't exactly match the descriotion, this article may be usefull in discovering if there is a setting on your computer that is causing this to happen.
    iPod not recognized in 'My Computer' and in iTunes for Windows
    http://support.apple.com/kb/ts1369
    -Griff W.

  • Problems with Ipod Touch

    Problems with iPod Touch.
    Hi, I bought an ipod touch in Colombia a couple of months ago but lost the invoice, I tried using it but everytime I connect the iPod to the computer, it restarts over and over again, I've tried all the recommendations show in the Apple support site, but no method has proved the question is, I can take this ipod to a Mac store in the U.S. for repair or change.
    I live in Venezuela, there is some Apple store in my country where I can take it.
    Thanks in advance for your quick response

    You should be able to go to the USA for warrantee service. If you purchased at an Apple store you should be able to go to your account in iTunes and see the purchase. I am confused by your statement:
    "I live in Venezuela, there is some Apple store in my country where I can take it."
    If you go to the Venezuela apple website you can see if/where there are Apple stores.

  • I'm having problem with exporting video from premiere pro cc 2014

    I'm using Adobe Premiere Pro CC 2014 and I'm having problem with exporting video.
    When I click Export and media, the window for exporting appears and it starts exporting video.
    But after a few minutes, it looks like it has completed exporting video and says there's a bug in exporting.
    It literally says it has a problem with compiling, but I don't know what the real problem is.
    I tried many things like restarting computer and Premire Pro but it's no use.
    But it works when I use Adobe Media Encoder CC 2014 for exporting video.
    If anyone knows any possibilities about why this problem happens, please let me know.

    I'm having a similar issue.  When I go to export my project, I add it to the render queue, set it up with the h.264 settings that I've used with countless past versions of the program, and then hit render.  Randomly, at some point in the process, the render just stops and the ETA just keeps climbing.  I actually had to save an XMF file of the CC 2014 project and bring it into the previous CC version of Premiere just to finish it.  Even a clean re-install of CC 2014 doesn't work.

  • Hi! I´m having problems with showing video files in Qlab on my Macbook Air. A sound/video technician told me to "blow out" my Mac. Was told to use  cmd+ r  when restarting. Is this the right way?

    Hi! I´m having problems with showing video files in Qlab on my Macbook Air. It started suddenly. Consulted a sound/video technician who told me to "blow out" my Mac. Was told to use cmd+r  when restarting. Is this the right way to clean up my Mac? And is it likely that some kind of bug is causing problems for Qlab to show video files? I´ve already tried with a bunch of different video files and sometimes Qlab plays them and sometimes not. I need the Qlab playlist for a theatre show and only have a week until showtime so starting to really worry. Is there anyone out there who can help?

    Your Mac runs maintenance in the background for you.
    Command + R gives you access to restore, repair, or reformat the drive using OS X Recovery
    No idea why that was suggested.
    You may have a third party video player installed that's causing an incompatibility issue.
    Check these folders:
    /Library/Internet Plug-Ins/
    /Library/Input Methods/
    /Library/InputManagers/
    /Library/ScriptingAdditions
    ~/Library/Internet Plug-Ins/
    ~/Library/Input Methods/
    ~/Library/InputManagers/
    ~/Library/ScriptingAdditions
    The first four locations listed are in the root-level Library on your hard disk, not the user-level Library in your Home folder.The tilde (~) represents your Home folder.
    To access the Home folder in OS X Lion or Mountain Lion, open the Finder, hold the Option key, and chooseGo > Library.

  • Itunes 7.0.1 still has major problems with jerky video

    I thought the newest update to Itunes 7 would fix my problems with jerky video that have begun since this Itunes 7 came out. At first I thought maybe my computer was too old (powerbook 12" 1.5 Ghz, with maxed out RAM) to play the new resolution, but then I realized that even my old TV shows had jerky playback. It doesn't seem to matter what size. The audio works fine, but the video freezes every few seconds. This is not really acceptable and I'm thinking about uninstalling Itunes 7 until apple issues a fix that address this video playback issue. Anyone have any suggestions or heard anything? Thanks!
    - Tpetdoctor

    I located the problem of the jerky (1 to 2 frames per second) video that started after updating to iTunes7 and 7.0.1!
    Dragging (copying) the file "ATIRadeon9700GLDriver.bundle" from system/library/extensions/ to the desktop and deleting it from the extensions folder (or else simply deleting it and then dragging it from the trash to the desktop) returns normal smooth video to non-H.264 mpeg video on my second generation iMac (ATI Radeon 9600). Unfortunately, this also makes Coverflow stop working with the message "iTunes is unable to browse album covers on this computer". I'm not sure what else will be disabled by moving this file.
    Obviously, this is not a solution, or even a feasible workaround. Where can I get a "good" ATI driver? I went to the ATI site "https://support.ati.com/ics/support/default.asp?deptID=894&task=knowledge&fold erID=27" and tried installing "macosx-ati-displays-4-5-7.dmg", but to no avail.

  • Problems with Flash Video

    OK - I have had intermittent problems with Flash video, basically it gets choppy, usually after about 20 minutes - half an hour of watching - recently this problem has gotten worse - coinciding with a recent system update perhaps? - it's more or less anytime I stream something, and it happens on all browsers, even when the movie has clearly downloaded and is buffered way in advance of the playhead.
    On 2 occasions recently leaving the movie to play just to see what happens has led to a kernel panic.
    I've heard alot about Flash video generally being a resource hog and not playing ball sometimes - is there a way to solve this issue? Things I have tried - reset sound to 16 bit 44.1 khz in audio/midi manager; fixed permissions; run Tech Tool - everything seems to be fine hardware wise - I think there are some incompatible driver issues that are meesing up RAM usage but have no idea what or how to solve this... Any ideas anybody?
    Thanks.

    If, as you show, you are running 10.5.2, that is out of date. You need to install the 10.5.8 combo updater.
    It is also possible that your FlashPlayer is out of date.
    The latest version of Adobe FlashPlayer can be obtained from here:
    http://www.adobe.com/shockwave/download/download.cgi?P1ProdVersion=ShockwaveFlash
    (You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS.
    You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
    http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_14157
    and also that you follow the instructions closely, such as closing ALL applications first before installing. You must also carry out a permission repair after installing anything from Adobe.

  • Is it somebody Except for me Who has problems With waching videos on ipad after the 5.0.1 update

    Is it somebody Except for me Who has problems With waching videos on ipad after the 5.0.1 update

    Hi,
    yes I have big problems as soon as I open the video app i get a total black screen, even the upper bar with the time disappears. I already tried to:
    1. closing the app and reopen it
    2. restart the iPad
    3. restore the iPad via iTunes
    4. Begging the app to work again.

  • Memory leak problems with loading videos over and over.

    I'm having memory leak problems with loading videos into a VideoPlayer aswell as FLVPlayback.
    What the flash should do:
    - Should be running for 7 days without having to restart the projector.
    - Interface that shows people around a 360 3D model with 5 different parts and at the stops it makes during the rotation you can click to zoom in on a location which plays a movie for that aswell.
    - Shows a video out of 5 parts for a 360 rotation in 3D in mp4 video (added each time and cleaned up, see code below).
    - Still images are used when the video clips are done playing (MovieClip in stage).
    - Should run automatically when there is no user interaction for X minutes.
    What the problem is:
    - The flash (as a exe and swf i guess) starts to consume memory over time (say 10 hours) until the projector crashes. This usually at around 1.75 GB of memory.
    I cannot see why the Flash cannot garbage collect this and free up the memory. Mabye there is something I don't understand about the garbage collection in flash?
    Here is some code from the video loading and playing:
    var fVideo:VideoPlayer;
    VideoCreate();
    function VideoReady(pEvent:VideoEvent):void
    trace("VideoReady()");
         // start playing video
    fVideo.play();
    function VideoLoad(pUrl:String):void
         trace("VideoLoad(" + pUrl +
         VideoCreate();
         if (pUrl != "")
              if (fVideoFolder + pUrl == fVideo.source)
                   fVideo.seek(0);
    VideoReady(null);
              } else {
    trace(fVideo.state);
                   if (fVideo.state !=
    VideoState.DISCONNECTED) fVideo.stop();
    fVideo.close();                                
    fVideo.load(fVideoFolder + pUrl);
         } else {
    // error no url
    function VideoCreate():void
         trace("VideoCreate()");
         // remove old one
         if (getChildAt(0) == fVideo)
              removeChildAt(0);
         fVideo = new
    VideoPlayer(1024, 768);
         addChildAt(fVideo, 0);
         fVideo.autoRewind = false;
    fVideo.addEventListener(VideoEvent.COMPLETE, VideoDonePlaying);
    fVideo.addEventListener(VideoEvent.READY, VideoReady);

    Hmm. It's in connection with Dropbox. Så apparantly you can only use one of the two at the same time if you want the programs integrated in Finder.

Maybe you are looking for

  • Solaris Express Zone install error with SUNWiiimr and SUNWcnetr

    Hi all, I got these errors when installing a new zone on a Solaris Express 1/08 (5.11) on a x64 box: Installation of these packages generated errors: SUNWiiimr Installation of these packages generated warnings: SUNWcnetr The zone creation log shows:

  • TS1646 Problem with updating payment information with iTunes

    I have tried multiple times to put my DEBIT card information into iTunes and it is still not taking it. I have also tried to add my mom's and it is telling me the same thing. That the "credit card does not match bank records." Does iTunes not take de

  • User Exit for MIR7 Simulate

    Hi all,         I need to implement a user exit for MIR7 similation . requirment is when user click on button simulate at the time of MIR7 the total amount of all line items should be displayed in popup or any small window. therefore any user is ther

  • CProjects 4.0 - Config Guide

    Hi, I am implementing cProjects 4.0 However I do not have the configuration guide for the same. Presently, I am using Config Guide of cProjects 3.10 Can anybody send me the config guide for cProjects 4.0 I have d one for cFolders 4.0 Mail me @: [emai

  • LMS 2.6, cannot start process syslogAnalyzer

    I'm unable to generate any syslog reports. an error is received when I see the collectot status > Error Collector Status is currently not available Check Whether SyslogAnalyzer process is running normally The following is the Analyzer status     Proc