CRC errors after getting the k7n2 delta-l

just wondering if anyone else is having this problem. i download game demos try to install them crc errors, transfer files between pcs on the lan corrupt files, sometimes try to install games off cds crc errors getting aggrevated returning board very soon waiting to see what tech support says to me im guessing its a bad ide controller never had a problem with the hardware in my asus board
450 watt powersupply dont remember by whom not taking case apart to look
msi k7n2 delta-l
ati radeon 9600xt
80 gig westerd digital cavier
liteon cd rom
creative labs audigy es
512 ram not sure of the manufacturer
amd athlon xp 3200
latest bios and nforce drivers

well ok im beta testing a game for one and i know the download is good cause it was on my other board which was an asus a7v600 kt600 chipset so no it wasnt an nforce but i went back to the nforce chipset cause i had a shuttle board that was nforce 2 ultra chipset and i loved it up til the bios crashed same parts where on it that is on this one but anyways anything i download now and try to install it i get crc errors a different error each time sometimes no errors at all but 99.9% of the time there there im leaning toward it being a faulty eide controller as its doing it no matter which ide i plug it into ive already got an rma sending it back for replacement as i know my ram is good as my games that i installed play fine no problems but i will test my memory anyways

Similar Messages

After getting the dreaded gray/blue screen, I tried to run disk repair on the internal disk. I got an error message saying "Disk Utility can't repair this disk and restore your backed-up files. The volume Macintosh HD could not be verified completely

After getting the dreaded gray/blue screen, I tried to run disk repair on the internal disk. I got an error message saying "Disk Utility can't repair this disk and restore your backed-up files. The volume Macintosh HD could not be verified completely." What do I do now? This is an iMac and I'm running 10.6.8.

Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it. See below for how to clone a drive.
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. Be sure you configure your initial admin account with the exact same
         username and password that you used on your old drive. After you finish Setup
         Assistant will complete the installation after which you will be running a fresh
         install of OS X. You can now begin the update process by opening Software
         Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
You may be able to backup your data if you have an erased external drive you can use. Before you do the above but after you have opened Disk Utility you can try to clone your drive:
Clone using Restore Option of Disk Utility
1. Open Disk Utility.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Select the destination volume from the left side list and drag
       it to the Destination entry field.
5. Select the source volume from the left side list and drag it to
      the Source entry field.
6. Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.
Now this will only work if the drive is accessible and can be cloned by Disk Utility. Otherwise, you would need to access your drive from another Mac that you can connect via Firewire - Target Disk Mode.

After getting the latest update I recieve an error about MSVCR80.dll missing has anyone found the solution as uninstalling and re installing doesnt work

after getting the latest update I recieve an error about MSVCR80.dll Missing, has anyone found the solution as uninstalling and then installing doesnt seem to work

Doublechecking. Have you tried the following user tip?
Troubleshooting issues with iTunes for Windows updates

Can't install OEM version of WinXP on the K7N2 Delta!??!?

I posted on amdmb.com's forums about how I cannot get WinXP to install on my hard drive connected to the k7n2 delta. Wonkanoby, a senior moderator on one of the boards here, and a visiotor on those boards at amdmb.com, stated that OEM versions won't work on this mainboard and you have to have a retail box windows version. Is this true? if so, this is complete crap! If MSI thinks I'm going to spend $150 bucks on a retail boxed version of Xp when I have a perfectly fine working copy right here, they are N U T S!!! This has got to be the most outrageous thing I've ever heard concerning mainboard issues. I hope MSI realizes they will either be working on a bios fix or they're paying me the restocking fee to send this board back to Newegg.

http://www.duxcw.com/faq/win/xp/oeminst.htm
How to Install the OEM Version Windows XP Professional
Last updated: 6/18/02
Q. How Do You Install the Windows XP Pro OEM Version?
A. I install it on a new computer (or hard disk drive taken down to "bare metal") from the DOS prompt with a Windows 98 Startup floppy (http://duxcw.com/digest/Fromshop/software/windows/startup/startup.htm). Put a copy of smartdrv.exe on the Startup floppy. You should be able to find a copy on and existing Windows 9x/Me computer at C:windows. It is on the CD’s in D:win98. Boot to the floppy and use fdisk to partition the drive (the process the same as that at http://duxcw.com/digest/Howto/software/windows/upgrade/fdisk.htm. Format the C: drive. Do not install the system files. If you have more than one partition, they can be formatted during the Windows XP installation or with Windows XP after it is installed. Also, use fdisk to manually make C: active if there is more one partition. Load smartdrv.exe…
A:>smartdrv.exe
…and run D:i386winnt.exe, where D: is your CD-ROKM drive.
Do not delete or reformat C: with this method. Winnt.exe copies the install files to that partition. You can convert it to NTFS and that process is fast. It should also work if the i386 directory is copied to a scratch hard disk and the hard disk is connected to the secondary IDE interface.
OEM = Original Equipment Manufacturer = a company that makes/markets computers (and parts), etc. which include parts made by other companies, and not the “original” manufacturer as OEM implies, just masquerading as one. Licenses of OEM versions of Windows, etc. software are sold to computer manufactures for installation on new computers. They are full versions of Windows, not upgrades. They are widely available on the "grey market" and Internet and cost considerably less than retail full versions. Just be careful not to purchase a pirated copy.

Can I have an oppinion on the K7N2 Delta-ILSR

I'm looking for my next board and after reading this article dated:August 2003,in Maximum PC mag, I wanted to know more. I have always been a Pentium guy so I don't know anyting about AMD and it's compatibilities...what is a fast processer for this board..?
How would it compare to the Pentium in Gigahertz?
Is this mother board even worth the trouble..?
So many questions, so little time.

I have and love hate my MSI K7N2 Delta when its working its a great board but it can tax you at times.
I've learned a lot in building this one. I have been building computers for years started with the K6 III 450 and a FIC motherboard.
I never had any problems with any of them just put togather load and use.
The only other time I had any real problems with any of my computers was when ME came out I jumped right away what a mistake that was it was mouths before all the drivers where fixed and even than some never got fixed and had to quit using some of my hardware like a sound Card etc.
The Nvidia chipset that is the heart of the K7N2 Delta is very picky about what ram you use even some that look like there working can give you headaces.
Also they take very good power supplies the cheap 300 to 400 wat power supplies just won't hack it. Get a good one. Antec, Enermax etc.

Error while getting the ORACLE user account for your concurrent request

Hi ,
When I am submitting the Concurrent Program from OAF page Iam getting
Error
Encountered an error while getting the ORACLE user account for your concurrent request. Contact your system administrator.
When we will face this error.
Not able to submit the Request
Krishna

Krishna
Try like this
public int submitCPRequest(String shipmentId) {
System.out.println("into submitCPRequest");
try {
OAApplicationModule am = pageContext.getApplicationModule(webBean) ;
OADBTransaction transaction = am.getOADBTransaction();
Connection conn = transaction.getJdbcConnection();
ConcurrentRequest cr = new ConcurrentRequest(conn);
cr.setDeferred();
String applnName = new String("XXAPL"); //Application that contains the concurrent program
System.out.println("ApplName"+ applnName);
String cpName = new String("SHIP_REQ"); //Concurrent program name
System.out.println("Concc Name"+ cpName);
// String cpDesc = new String("Shipping Request"); // concurrent Program description
// Pass the Arguments using vector
// Here i have added my parameter headerId to the vector and passed the
//vector to the concurrent program
Vector cpArgs = new Vector();
cpArgs.addElement(shipmentId);
System.out.println("Args"+ cpArgs);
After this it is going into exception
// Calling the Concurrent Program
int requestId = cr.submitRequest(applnName, cpName, null, null, false, cpArgs);
System.out.println("Req Id"+ requestId);
tx.commit();
return requestId;
catch (SetDeferredException e)
throw new OAException("SetDeferredException " + e.getMessage(),OAException.ERROR);
catch (RequestSubmissionException e) {
System.out.println("Into Exception");
OAException oe = new OAException(e.getMessage());
oe.setApplicationModule(this);
throw oe;
}Thanks
AJ

Problem calling web service: Error while getting the ORACLE user account

Hi All!
I was able to call the service EGO_ITEM_PUB-PROCESS_ITEM, but after implemented some patches, suddenly I get this error as result:
- <env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/">
- <env:Body>
- <OutputParameters xmlns="http://xmlns.oracle.com/apps/ego/soaprovider/plsql/ego_item_pub/process_item__1/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<X_INVENTORY_ITEM_ID xsi:nil="true" />
<X_ORGANIZATION_ID xsi:nil="true" />
<X_RETURN_STATUS>U</X_RETURN_STATUS>
<X_MSG_COUNT>1</X_MSG_COUNT>
<X_MSG_DATA>Encountered an error while getting the ORACLE user account for your concurrent request. Contact your system administrator.</X_MSG_DATA>
</OutputParameters>
</env:Body>
</env:Envelope>
Any ideas?
Thanks,
Konrad

hsawwan wrote:
Hi,
I was able to call the service EGO_ITEM_PUB-PROCESS_ITEM, but after implemented some patches, What are those patches?
# Patch 8407693:R12.TXK.B ISG: Service Generation Failure - Java Compiler Could Not be Found
# Patch 8459663:R12.OWF.B : Mandatory Consolidated One-Off Fixes for ISG on Top of 12.1.1
# Patch 8916358:R12.OWF.B : Service Timeout When Invoking Services Deployed to Integrated SOA Gateway
# Patch 9349321:R12.OWF.B : Issue with item Bulk Load in Oracle Product Hub PIP 2.4
# Patch 9446625:R12.FND.B : 1OFF:8995921:12.1.1:12.1.1:PERF : LoginModules Performance Issue
# Patch 9070077:R12.OWF.B : 1OFF:9045280:12.1.1:12.1.1:Invoking a Web Service Requires NLS Lang When It Should be Optional
# Patch 9153106:R12.OWF.B : IREP_Parser.PL Exits with GETPWUID Function IS Unimplemented in PARSER.PM -> Wichtig für ISG (für custom pl/sqls im ISG)
# Patch 9004712:R12.OWF.B : One-Off for IREP PARSER on Top of Oracle E-Business Suite Release 12.1.1 -> Wichtig für ISG (für custom pl/sqls im ISG)
IAS:
# Patch 8607523 for the AS version 10.1.3.4
Oracle Support told me that I need this patches because of some other problem (generating wsdl and deploy for BOM_BO_PUB package does not work in my environment) and since that, the process_item call stopped working!
btw: The EGO_ITEM_PUB-PROCESS_ITEM call for an existing item still works (I can modify the description), but creating a new item does not work anymore. Here are the parameters I send to the web service:
Header:
<wsse:Security xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">
<wsse:UsernameToken>
<wsse:Username>sysadmin</wsse:Username>
<wsse:Password
Type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText">sysadmin</wsse:Password>
</wsse:UsernameToken>
</wsse:Security>
<q0:SOAHeader/>
Body:
<q1:InputParameters>
<q1:P_API_VERSION>1.0</q1:P_API_VERSION>
<q1:P_INIT_MSG_LIST>T</q1:P_INIT_MSG_LIST>
<q1:P_COMMIT>T</q1:P_COMMIT>
<q1:P_TRANSACTION_TYPE>CREATE</q1:P_TRANSACTION_TYPE>
<q1:P_ITEM_NUMBER>KHR_WS_05</q1:P_ITEM_NUMBER>
<q1:P_DESCRIPTION>desc2</q1:P_DESCRIPTION>
</q1:InputParameters>
Thanks,
Konrad

When I am trying to download (after getting the email that it is ready to download adobe acrobat pro) it says this - 413 Header Length too Large Any suggestions??

When I am trying to download (after getting the email that it is ready to download adobe acrobat pro) it says this - 413 Header Length too Large Any suggestions??Ado

Moving this discussion to the Acrobat Installation & Update Issues forum.
Kltjlt6458 to resolve the current error clear your current web browsers cache and cookies. If you continue to receive the same error then please utilize a different web browser.

HT201442 My iPhone 4s hasnt been used in over 6 months. Everytime I plug it into my computer and iTunes, it says it requires a restore and update. It then comes up with an error after completing the download for the restore and update (takes around 10 min

My iPhone 4s hasnt been used in over 6 months. Everytime I plug it into my computer and iTunes, it says it requires a restore and update. It then comes up with an error after completing the download for the restore and update (takes around 10 minutes).Someone help me as I'm using the original iPhone 3 at the moment and it won't even take an ios 7 update!

Just to confirm on the screen of the iPhone do you see the itunes symbol with a cable pointing up to it?. If you do then your iPhone is inrecovery mode and would require you to restore it.
Now first you want to make sure iTunes is up to date and the cable you are using is not damaged. You also want to make sure iTunes is up to date.
Now if you get an error message then follow the article below to find out what causes the issue:
http://support.apple.com/kb/TS3694
In terms of the iPhone 3G that is definitely not able to update to iOS 7. Only the iPhone 4 and larter can update to iOS 7.

Why in September when I purchased a through the Edge program with the $5.00 insurance/protection plan (that the sales associate handling the purchase on the phone recommended), is no longer valid?! 2 months after getting the Edge device, I go to make a c

Where is the insurance and original Edge Agreement from September? No one in Verizon knows. I purchased (rented) a Galaxy S4 through the Edge program, with the $5.00 insurance/protection plan (that the sales associate handling the purchase on the phone recommended),which is no longer valid! 2 months after getting the Edge device, I go to make a claim and Asurion will not honor it because I am not covered; however, all the order confirmation receipts emailed and physically sent with the device show the addition of insurance when I signed up for the Edge program. According to Verizon (via live chat with 'Nicole'), this $5 protection plan no longer exists and the order numbers I have on my paperwork (multiple documents) are invalid in the Verizon system. For over a week, I have spent more than 10 hours on the phone, live chat and in the store trying to get some sort of resolution and the customer service reps just put me on hold or promise to "call me back within 30 minutes after they speak to a supervisor" and (surprise!) they never return my call. Or they send me to the store to show proof of my documents, but then those associates cannot help either. Also, the 'Edge Agreement' in my profile has the wrong device (and serial #), wrong payment amounts and no mention of the 'consumer protection plan' on it, which is listed on the order confirmation sent via email and with the actual Edge device on September 23. Obviously, there was some sort of glitch or mistake on Verizon's part, but NO ONE WILL EVEN TRY TO ACCEPT THAT FACT! WHY WON'T ANYONE GET BACK TO ME WITH SOME SORT OF EXPLANATION FOR ANY OF THIS?! Is it typical for Verizon to do away with a service (i.e., $5.00/month protection) and not inform the customer of this? And is it company policy to be as unhelpful as possible to a paying customer who needs assistance when there is cleary something wrong on your end? And finally, am I really suppose to believe that Verizon customer service has no email addresses or fax machines so a customer can send you proof of what is on the receipt you sent and that I have to take more of my time to go to the actual store?! Finally, does anyone at Verizon even read these messages or even give a F@#k about the customer as long as they keep making money?!

RLites22,
I can understand your concern about the insurance you have on the line. I want to make sure that I put a fresh pair of eyes on your account to find out exactly what is going on. I did send you a Direct Message. Can you please respond back to me in the direct message so we can go over the account specifics. I really hope to hear back from you soon.
KevinR_VZW
Follow us on Twitter @VZWSupport

Error in getting the BAPIWrapper name from the ini file or SAP mobile configuration: Agentry Error

Hello Experts,
I follow the flightbooking tutorial to create a Material application to get material list. I can start the agentry server but when I connect to SAP server and get data, I face below issue
Error in getting the BAPIWrapper name from the ini file or SAP mobile configuration. Please check the ini file or the mobile configuration for the bapi key (com.syclo.sap.material.bapi.materialbapi) either in sections BAPI_WRAPPER or REQUIRED_BAPI_WRAPPER
I check the parameters name in SAP Agentry Config panel, all are correct. Why cannt it get the data. Do I have to add anything in javaBE.ini? Please help me. Thank you very much.
My javaBE
[HOST]
server=be1.vdc.csc.com
APPNAME=ZCH_MATERIALLIST
[CLIENT_NUM]
CLIENT=800
[SYSTEM_NUM]
SYSNUM=01
[LOGON_METHOD]
; USER_AUTH if standard UID/Password authentication is used
; USER_AUTH_GLOBAL if pooled connections using single UID/Password is used
; USER_AUTH_GROUP if UID/Password authentication with SAP Message Server
; (load balancing) is used
LOGON_METHOD=USER_AUTH
[GLOBAL_LOGON]
; referenced when LOGON_METHOD=USER_AUTH_GLOBAL
; uses a pool of connections to the SAP backend all utilizing a single
; UID/password
UID=
UPASSWORD=
SHAREDCONNECTION=0
GET_PERSONNEL_INFO=
[SERVICE_LOGON]
ENABLED=true
UID=hngu3
UPASSWORD=xxxxxxx
UPASSWORDENCODED=false
[GROUP_LOGON]
; referenced when LOGON_METHOD=USER_AUTH_GROUP
; individual user authentication using an SAP Message Server which distributes
; client connections among a "group" of SAP application servers based on load
; balancing criteria
; host name or IP address of SAP Message Server
MESSAGE_SERVER=
GROUP_NAME=
SYSTEM_ID=
CLIENT=
[LANGUAGE]
LANG=EN
[LOGGING]
Level=4
[REQUIRED_BAPI_WRAPPER]
com.syclo.sap.bapi.LoginCheckBAPI=/SYCLO/CORE_SUSR_LOGIN_CHECK
com.syclo.sap.bapi.RemoteUserCreateBAPI=/SYCLO/CORE_MDW_SESSION1_CRT
com.syclo.sap.bapi.RemoteParameterGetBAPI=/SYCLO/CORE_MDW_PARAMETER_GET
com.syclo.sap.bapi.SystemInfoBAPI=/SYCLO/CORE_SYSTINFO_GET
com.syclo.sap.bapi.ChangePasswordBAPI=/SYCLO/CORE_SUSR_CHANGE_PASSWD
com.syclo.sap.bapi.CTConfirmationBAPI=/SYCLO/CORE_OUTB_MSG_STAT_UPD
com.syclo.sap.bapi.DTBAPI=/SYCLO/CORE_DT_GET
com.syclo.sap.bapi.GetEmployeeDataBAPI=/SYCLO/HR_EMPLOYEE_DATA_GET
com.syclo.sap.bapi.GetUserDetailBAPI=/SYCLO/CORE_USER_GET_DETAIL
com.syclo.sap.bapi.GetUserProfileDataBAPI=/SYCLO/CORE_USER_PROFILE_GET
com.syclo.sap.bapi.PushStatusUpdateBAPI=/SYCLO/CORE_PUSH_STAT_UPD
com.syclo.sap.bapi.RemoteObjectCreateBAPI=/SYCLO/CORE_MDW_USR_OBJ_CRT
com.syclo.sap.bapi.RemoteObjectDeleteBAPI=/SYCLO/CORE_MDW_USR_OBJ_DEL
com.syclo.sap.bapi.RemoteObjectGetBAPI=/SYCLO/CORE_MDW_SESSION_GET
com.syclo.sap.bapi.RemoteObjectUpdateBAPI=/SYCLO/CORE_MDW_SESSION_UPD
com.syclo.sap.bapi.RemoteReferenceCreateBAPI=/SYCLO/CORE_MDW_USR_KEYMAP_CRT
com.syclo.sap.bapi.RemoteReferenceDeleteBAPI=/SYCLO/CORE_MDW_USR_KEYMAP_DEL
com.syclo.sap.bapi.RemoteReferenceGetBAPI=/SYCLO/CORE_MDW_SESSION_GET
com.syclo.sap.bapi.RemoteReferenceUpdateBAPI=/SYCLO/CORE_MDW_SESSION_UPD
com.syclo.sap.bapi.RemoteSessionDeleteBAPI=/SYCLO/CORE_MDW_SESSION1_DEL
com.syclo.sap.bapi.RemoteUserDeleteBAPI=/SYCLO/CORE_MDW_SESSION1_DEL
com.syclo.sap.bapi.RemoteUserUpdateBAPI=/SYCLO/CORE_MDW_SESSION_UPD
com.syclo.sap.bapi.TransactionCommitBAPI=WFD_TRANSACTION_COMMIT
com.syclo.sap.bapi.SignatureCaptureBAPI=/SYCLO/CS_DOBDSDOCUMENT_CRT

Hi Tahir, please help me check the log below
Agentry Runtime Worker Thread###throwExceptionToClient::begin |
Agentry Runtime Worker Thread###throwExceptionToClient::com.syclo.sap.material.steplet.MaterialSteplet::throwExceptionToClient::397::MaterialSteplet - Error in getting the BAPIWrapper name from the ini file or SAP mobile configuration. Please check the ini file or the mobile configuration for the bapi key (com.syclo.sap.material.bapi.materialbapi) either in sections BAPI_WRAPPER or REQUIRED_BAPI_WRAPPER |
Agentry Runtime Worker Thread###Exception: 17:15:35 06/17/2014 : 20 (Agentry3), Java Business Logic Error (com.syclo.agentry.BusinessLogicException: MaterialSteplet - Error in getting the BAPIWrapper name from the ini file or SAP mobile configuration. Please check the ini file or the mobile configuration for the bapi key (com.syclo.sap.material.bapi.materialbapi) either in sections BAPI_WRAPPER or REQUIRED_BAPI_WRAPPER), |
Agentry Runtime Worker Thread###loggedOut::begin |
Agentry Runtime Worker Thread###HNGU3: SESSION END |
Agentry Runtime Worker Thread###BAPI::begin |
Agentry Runtime Worker Thread###create::nulled repository::created new repository |
Agentry Runtime Worker Thread###create::/SYCLO/CORE_MDW_SESSION1_DEL Connection ID: com.sap.mw.jco.JCO$Client@2656ed99 |
Agentry Runtime Worker Thread###create::Function /SYCLO/CORE_MDW_SESSION1_DEL created |

ORA-20160: Encountered an error while getting the ORACLE user account.

when users trying to apply for the leave . Once they apply for the leave and the respective manager approves it.
They get an notification mail with the error message The changes were not applied because ORA-20160: Encountered an error while getting the ORACLE user account for your concurrent request. Contact your system administrator. ORA-06512: at "APPS.ALR_PER_ABSENCE__800_53447_IAR", line 3 ORA-04088: error during execution of trigger 'APPS.ALR_PER_ABSENCE__800_53447_IAR'
EBS : 12.1.2
Database : 11.2.0

We are also facing the same issue , with the following error.
The Changes were not applied because ORA-20160: Encountered an error while getting the ORACLE user account for your concurrent request, Contact your system administrator. ORA-06512: at “ APPS.ALR_PAY_ELEMENT_801_53338_IAR”, line 1 ORA-04088: error during execution of the trigger ‘APPS.ALR_PAY_ELEMENT_801_53338_IAR’
Dear Hussein ,
As per your suggestion , if we disable the trigger , does it workflow goes ahead without any problems ?
By Disabling the trigger , what would be the impact ? I mean does we are going to loose the data that was supposed to be updated the trigger.
And basically please educate me . what is the use of this APPS.ALR_PAY_ELEMENT_801_53338_IAR’ ?
Regards
Raghu

What is the first step of an abaper after getting the FDS

what is the first step of an abaper after getting the Functional Document ?what we have to do? how to analyze it , and how to face such interview questions on FDS TDS . any resource available.

Hi,
After getting the FDS , first understand the functionality of the requirment or take the help of the functional consultant and then start preparing TS ( TEchnical Specification) and do coding and get your doe reveirewed and prepare test cases and do testign in sand box and quality environment and after having got the confrimation that the requirment is met then port it to production.
Regards,
Irfan
Note: Please award helpful answers.

I got an internet connection on my phone. After getting the internet connection, I was unable to make a call or check the missed calls that I got. Please help me resolve this problem.

I got an internet connection on my phone. After getting the internet connection, I was unable to make a call or check the missed calls that I got. Please help me resolve this problem.

Hi my acrobat pro will not open, this is the error I get - "the application Adobe acrobat pro can't open -1712

Hi my acrobat pro will not open, this is the error I get - "the application Adobe acrobat pro can't open -1712

Hi Scott,
1. What is the version of Acrobat and Operating System?
2. Have you tried repairing the product? if not then Go to Help -> Repair Acrobat Installation.
Regards,
Anoop

CRC errors after getting the k7n2 delta-l

Similar Messages

Maybe you are looking for