Creaitve labs zen micro photo

hi everyone ..... my daughter has been bought one of the micro photo zen 4gb i know iam asking what has prob been asked before...but can anyone tell me if this works with vista and will this have digital rights for the internet....can this be adapted for vista? what firmware would i need to download and where from...i? would really like to have this working for her have been given the task of trying to sort this and you guys seem like the only ones who could help....i would be very grateful guys if you would spare a second of your time to help....regards paul

loading time? do you mean the time it takes to recharge? on USB i think it's around 3-4hrs. i bought the AC adapter recently, i love it. it was around 25$ at walmart and that cuts the charge time by around /2 or so. you can also run it on AC without the battery so it'll last you longer.

Similar Messages

  • My zen micro photo won`t charge with anything else but my usb port h

    i bought a charging package for my creative labs zen micro photo. when i use the wall charger or the car charger, it shows it is charging but the battery icon on the micro photo does not does not fill up. i leave it on?for hours but that does not help.i bought this charging pack from ebay and it says it is mead for the micro photo.any thoughts. thank you

    this was an after market package it only cost me $4 and would cost me close to that much to send it back. i guess i will buy the one you got at creative labs. you said it works with your zen micro photo?would you send me the model number of the wall charger. thank you so much

  • SOLUTION - Zen Micro Photo Stuck in Recovery M

    My Zen Micro Photo got stuck in recovery mode after I followed Creative Labs Technical Support suggestions. They had me do a Clean Up, a Format All a Reload Firmware and a Reboot. After doing this my unit was stuck in Recovery Mode. They then had me load the latest firmware. v .3.0, from a PC connection and I found that it worked fine, but doing the above steps put me back into Recovery Mode hell. So I did some testing.
    I loaded firmware version .20.0 from my PC thinking the problem might be in the firmware version. Doing the steps they had asked me to do caused me to be in Recovery Mode Hell, so again I loaded firmware from my PC.
    This time I went through each item one at a time and rebooted after each. Clean Up/Reboot, Format ALL/Reboot and Reload Firmware/Reboot. They all booted normally except when I did a Reload Firmware.
    Next I loaded firmware v .3.0 to my unit again and did the same test. Again it put me in Recovery Mode Hell after I selected Reload Firmware from the Recovery Mode screen.
    Conclusion DO NOT LOAD FIRMWARE FROM RECOVERY MODE. If you have to load firmware at all, do it from your PC connection. I'm going to copy this into the VERY LONG message I have had with Creative Labs Technical Support over the past 5 days and let them know what I have found. I hope this helps others to fix their Micro Photo.

    I am having a similar problem. I am stuck in recovery mode and my PC won't recognize the MP3 player at all? I have rebooted, cleaned up, formatted, pulled the batt, etc. Finally I pulled the battery for longer than 30 seconds and that seemed to fix the problem. We will see.
    JW
    ECIT: oh ya, I am using a microphoto as well.Message Edited by Jfawkingdub on 06-29-200703:2 PM

  • Zen micro photo proble

    ok so i've had my zen micro photo since last summer, which means that the creative lab crew wont help me since my purchase is over a year old. lame. well i had a minor 2 ft drop with my buddy, and it wont work. when i turn it on, it freezes on the "creative" screen. then when i get to the option window so i can attempt to clean it out, it wont work, i would like to say that it freezes also on all the options, but i cant really tell. those are i guess minor problems. i dont really know, but it also will occassionally make this odd "skipping" noise when i take the battery out and replace it so it will restart. this kid at Best Buy said that it has a small rotating disk on the inside and that it could of cracked or isnt on properly. but this is a drag. and you would think that i could just plug my baby into the computer with the USB cord,but now it wont even respond to the computer, or the computer wont recognize it. if you have any advice that would be swell.

    i asked that same question because my zen micro broke no responded, but i did get a microphoto and have not had any problems yet.

  • My Zen Micro Photo 8gb has gone m

    Hi all,?My Creative Zen micro Photo 8gb has gone a bit mad. It had a firmware update, and then wouldn't work. SO I hooked it up to the PC and nothing was happeneing. It tried to rebuild the library, but froze. So I followed tech suppourt, and formatted it, and lost all my music, and it wont do anything now. It gets to the Recovery Mde Screen, and does the following:?Clean Up: - Says it's cleaning up, but does nothing really. Format All: - Says formatting, and does so. Reload Firmware: NOW, here's the interesting one, I hook it up to download the firmware... AND the PC recognises it's plugged in, but the firmware application doesn't. Reboot: - Reboots straight into Recovery mode again!?Very frustrating. Can anyone help?Cheers

    Mine too! It completely froze to Recovery mode, I can't even turn it off! I had to take off the batteries and when I open it, it's stuck in there. I had it replaced by Creative Labs. Btw, I commend their tech support. The email support is fast and very responsi've. A RMA was issued to me and they were able to replace it in a matter of days. Then my 2nd player (refurbished one,what I got back) was working for 7 days when it froze again. then it says rebuilding library or something..but it won't finish loading. It was stuck to that page, cannot turn off, had to take off batteries again. I did this 5 times, since it failed to reload the library. Afterwards, it displayed Hardware Failure.
    Now, I'm currently waiting for their email feedback since I reported the problem again.
    My advice, let them know. Hope you can work yours out.

  • Help with my Bran-New Creative Zen Micro Photo. [Questi

    <EM>If you don't want to see the backing of my whole story skip to the bold print at the bottom!</EM>I also want you to know I read the FAQs and searched through some topics like this, but haven't found any asking my question.First of all, I'm new to the forum, but I've been researching Creative's Zen for a long time now. I kept observing each one closely before I purchased a product. I then saw the Zen Micro Photo come out. This one won my attention. I loved this, I quickly searched for reviews and went for the buy for Christmas. I told my dad about it and he was "iffy" on the price, but it was better then the iPod in my opinion.Christmas day came and I opened it. Right away I checked everything out I knew a lot about the menu already and all, but not really how to control it. I checked to make sure everything worked. All systems were go. After listening to the defaults (which I loved) I went to go install the software. I already had Media Player 0 and Adobe, oh and I didn't want the freakin AOL toolbar! Lol, so I installed everything else. It took forever, but I hooked it up and I installed the drivers, but as soon as I plug in the USB connector I see: "A HIGH-SPEED USB device has been plugged into a LOW SPEED USB port.After that, I switched USB ports, btu I got same message. I hit the X and then tried to charge. I got the Lightening Bolt, but no dimming of lights. I found out that this computer is not letting me install any service packs, I'm confused about that.My question:Is there anyway I can charge this mp3 player and download music onto my Zen Micro Photo without Service Pack ? Or did I just pay $250 for a really cool glowing mp3 player to be used as a paperweight? (I love this Zen and I ran the battery dead hoping that would make the charging easier).Help?
    My Specifications:
    My Mp3 Player: Zen Micro Photo (Black)What I tried: Switching USB ports and re-installing Service Pack Software: Not sure how to determine firmware without installing something. I'm on a XP Professional and I'm using the Creative Media Source and Creative Media Toolbox

    Thank you DM for responding. I am expecting problems, but it still won't allow me to charge the Zen Micro Photo or even use the Creative Media Source. I can't upload any songs or any contacts on it. I haven't uploaded anything yet, but it's not reading the USB device. When I run Creative Zen Micro Photo Media Explorer I get this message at the top of the screen: "The device is not connected. Please connect your Zen MicroPhoto to the computer. I can't organize anything or add songs... so it just makes all the programs I downloaded useless and my Creative product unusuable.ONe thing it does do though... whenever I plug in my Zen MIcroPhoto to the USB it turns it on and glows, but only shows my battery at the top with one red line and the green lightening bolt filling the battery up.After leaving it like this for two hours the green moves, but the red bar stays the same size.

  • [Zen Micro Photo] Stuck in b

    My Zen Micro Photo gets stuck in the bootscreen. When I turn my Zen on it says "Creative" and after a couple of seconds "Zen Micro Photo". While "Zen Micro Photo" is in my screen it does nothing. I tried to take out the battery and turn it on again, but still nothing. Only after a couple of hours it starts working again.
    It als doesn't connect properly with Windows XP.
    The problem started a couple of days ago when I activated the removable harddri've mode on the Zen to connect it to Windows 2000.
    Should a reload of the firmware help?

    See the section "My Zen is not behaving properly, won't startup, or goes into rescue mode. What should I do?" in the FAQ.

  • Need help with Zen Micro Photo: It stays in recovery m

    Just recently, my zen micro photo has been staying in recovery mode. I have tried all of the four options available? to me in recovery mode. .) Clean up 2.) Formatt All 3.) Reload Firmware? 4.) Reboot. When I try "Reload Firmware". It doesn't really "reload". All it does is erase the current firmware, which it has done several times. My computer doesn't really realize the player. It doesn't allow me to acess my songs, which have already been deleted. It says the "Player is not connected". At first, I thought I needed to charge. I charged it to maximmum. The battery is "FULL". Also, the firmware update doesn't recognize the player either. Whenever I select the reboot option, my player reboots to recovery mode. This does no good, as I have tried all of the available options in recovery mode, and they have done no good. Your help would be greatly appreciated. Thank you.Message Edited by Damaniscool on 04-2-200707:29 PM

    do you hear a sound from the hard dri've like it's stuck? this is common. if so, please search this forum for "hard dri've whack" or "percussi've repair".

  • Zen Micro Photo bugs need to be worked out - firmware update comi

    Hi,
    I've had my Zen Micro Photo 8gb for a month & have discovered some interesting quirks: first, I don't believe mine is defecti've, though I've had problems. I have encountered freezing on both the "Zen Microphoto" logo and "rebuilding library" screen; I scoured this forum and the Knowledge Base for answers, trying all that seemed applicable?- I tried disk cleanup and reboot (leading to rebuilding library freezes), reformats & carefully reloading the latest firmware?a couple of times. I've drawn some conclusions:?) Mediasource software is not working for me; when I switched to using only Windows Media , most problems went away.2) For whatever reason, "rebuilding library" can only be accomplished while my Zen is connected to the computer - should this be the case?3) It seems like the times my screen freezes on the "Zen Microphoto" logo I may have held the "on" switch to the side a little longer than necessary; I'm wondering if this is happening because I'm holding the switch on a little too long?Anyway, I love the size, look and sound of this player, so I hope to keep using it. NOTE: can anyone from CREATIVE tell me if there will be future firmware updates? Thanks
    !!! Steve M.Message Edited by smills on 08-0-20070:24 AM

    I run windows XP pro . sp2, its quite strange.. it should work. ! **bleep** IT SHOULD WORK ! :smileyindifferent: , and the wirld thing is. i also try'ed it on another windows XP machine at work.. and it didient work there either. im beginning to question if this is the product for me. its realy sad though, i love the zen design.. not to mention the price.
    It realy realy bugs me that the zen micro photo isset supportet on windows 2000, i had this vision of syncronizing my work calender with the zen ... and now its just not possible ! unless my boss wants to give me a new laptop.. and i dont think that will happen . hehe
    Well i will keep on working on this issue.. ill let you know guys.

  • Using Zen Micro(Photo) with plain Explo

    Is there a possibility to copy MP3 files simply by drag-and-drop with the Windows Explorer to the Zen Micro(Photo) so that the files are treated as MP3 and NOT as simple data files? Technically it is quiet simple to do this by using the hard disk of the Zen as an extra hard disk in Windows. Even the cheapest USB-stick based MP3-player can do this. Why not a Zen (or the iPod competition)?
    I refuse to use any specific software to copy my self ripped MP3-files because I know that that software (Creative, iTunes, even Windows Media Player and other) changes things during the file transfer and I don't want any change in the MP3 files, not even a single bit!
    I want to buy a Zen Micro Photo (8 GB, color screen), but I refuse to do it as long as it is impossible to crag-and-drop my MP3 files simply thru the Windows Explorer.

    Yeah that's what i always did. I just drag and drop MP3 files directly into my player without using any software whatsoever.

  • Zen Micro photo.....HELP?

    <FONT color=#6666ff>ok sooo.... i am an idiot..............one night after coming home i was running to catch a ride with my friend and on the way.....my zen micro photo fell outta my pocket and into the grass..............well the next morning i obviously couln't find it so i got in my car and drove to the place that i got the ride from- well i founf it in the grass. So i was real happy that i found it until i got home and all it does when i turn it on is go to that stupid recovery mode-----and it wont go any where else.......................it doesn't look damaged at all. UGH it makes me real mad some one PLEASE HELP and gimme some suggestions!!!!!ASAP

    It really sucks about your player
    ...but it was concrete.
    ...and you've got a disk dri've inside there.
    what do you think would happen if you dropped a desktop computer from 3 feet off the ground onto concrete?

  • Zen Micro Photo not recognized in Media Explo

    Device automatically goes into Recovery Mode when turned on. Tried the clean up and format features, followed by reboot. Still nothing. ?When connected via USB, Device not recognized in Media Explorer. Tried to reload firmware, but getting error message that device is not connected.
    Can someone help?

    Hey i think i know what your problem is. What Operating System are u running on your computer? (Windows XP, ME etc) And also, if running XP do you have service pack installed? If you dont have service pack installed, you cant use your player. The system requirements can be found on the back of the zen micro photo box. goodluck!!

  • Having big problems with Creative Zen Micro Photo!! I need much urgent help!

    Hi. I am having a big problem with my MP3 Creative Zen Micro Photo device at the computer.Here is the thing:Before I bought this I had the regular Zen Micro & having fun with it. I had no problems with that when I used the Media Explorer to transfer songs. So I bought the Zen Micro Photo & installed it my computer. As normal I used the Media Explorer to transfer songs & pictures.So I reinstalled Windows XP at my computer, and when I installed the CD that followed to transfer new songs, the Windows said that it's an unknown thing I have connected in the USB.So I installed Service Pack & 2. I have tried to install drivers from the cd but it seems that there are no drivers on the cd! The big problem is that when I connect the MP3 to the computer, it doesn't read it's a Zen Micro, it's just unknown! So the Zen Micro Photo Media Explorer program doesn't work & I can't transfer songs or picture on it! And it just happened after I re-installed Windows on my computer. The same thing happened on my brother's computer after he re-installed windows. And when I connect the MP3 to the USB, it says that it's not a USB 2.0, but .! And I am sure it is 2.0 because it has always been like that before I re-installed windows. Also the MP3 does not re-charge when I put it my computer! The battery is just the same, it tries to do it but it doesn't. So I am using my sisters computer to charge the MP3 & transfer songs. I have tried everything but I can't seem to understand what the problem is? I have never experienced something like this before, and I really hope you can help me with this! To be honest I think what I am missing is the driver. So can someone PLEASE provide me the link for the driver? I have downloaded all those 3 on www.creative.com, but they are none of them! Also that playforsure firmawre thingy does not work because it sais that I have to connect my MP3, and it is connected already!Please reply as quick as possible! Thanks a lot for you kind help!
    I have also sent this mail to creative support! But please help me I have had this problem for almost 2 months now! =(Message Edited by anakwalajinn on 05-0-2006 08:47 PM

    Might try this:? http://forums.creative.com/creativel...mp=true#M95059

  • Zen micro photo batt

    I have heard that the zen micro and the zen micro photo have the same battery size, but the photos has a higher capacity. Would it be possible to buy a photo battery and put it in say a zen micro 5gb?

    yes you can

  • Zen Micro Photo Conce

    I am about to purchase a Zen Micro Photo. I am choosing it over the Zen Micro because of the many posts about the headphone problem on the Zen, the clearer screen on the Micro Photo, and the lack of availability of the Zen Micro in the stores - very few stores are selling the Micro and many have only the Micro Photo (which leads me to believe that the Micro is being phased out - at least in the marketplace). I have some concerns about the Micro Photo - there seems to be some posters on this group who have a buzz from the screen. Since many reviews of the Micro Photo say how great the sound is, I am going to assume, perhaps foolishly, that the buzz has been taken care of in the recent releases or this is not as common a problem as some would like to state. My other concern is and question is how fragile are these? There are warnings about NOT jogging with the Micros. I have not seen this with other companies'hd players. I plan to use this in a car. Is this going to be a problem? Sometimes roads are bumpy.
    One of the main reasons that I have chosen the Zen is the bookmarking features. I use the mp3 player for audiobooks and I want to be able to set a bookmark in mid track of a book, listen to something else, and then come back to that same place in the book and continue on - which from the Micro/Microphoto manuals I should be able to do. Is this correct?
    Surprisingly, few mp3 players can do this - the Ipod can't despite it's claim that it can.
    I appreciate any feedback.

    Information on LiON battery lifespans.
    <font face="Verdana, Arial, Helvetica, sans-serif" size="2">A lithium-ion battery provides 300-500 discharge/charge cycles. The battery prefers a partial rather than a full discharge. Frequent full discharges should be avoided when possible. Instead, charge the battery more often or use a larger battery. There is no concern of memory when applying unscheduled charges.
    Although lithium-ion is memory-free in terms of performance deterioration, batteries with fuel gauges exhibit what engineers refer to as "digital memory". Here is the reason: Short discharges with subsequent recharges do not provide the periodic calibration needed to synchronize the fuel gauge with the battery's state-of-charge. A deliberate full discharge and recharge every 30 charges corrects this problem. Letting the battery run down to the cut-off point in the equipment will do this. If ignored, the fuel gauge will become increasingly less accurate. (Read more in 'Choosing the right battery for portable computing', Part Two.)
    Aging of lithium-ion is an issue that is often ignored. A lithium-ion battery in use typically lasts between 2-3 years. The capacity loss manifests itself in increased internal resistance caused by oxidation. Eventually, the cell resistance reaches a point where the pack can no longer deli'ver the stored energy although the battery may still have ample charge

Maybe you are looking for

  • The iPod "name of my iPod" cannot be updated". The required folder cannot..

    When I try to my playlists in iTunes I get the message "The iPod "my iPod" cannot be updated". The required folder cannot be found." plz help none of my new music is getting onto my iPod.

  • How to get the logged in userId value in adf task flow OIM11g R2

    Hi, I have created an adf task flow. Now I want to run some query in that based on the logged in userId. Could you please help me in knowing how to get the logged in userID value in adf TaskFlow so that I can run a parameterized query. Thanks

  • Can connect to router and ping internet cant surf

    hello friends i have dell laptop and WRT54GC wireless router,router is connected to desktop all is working fine there but in wireless laptop i can ping the router i can ping the net example "ping google.com" i get reply but i cant surf the net via an

  • Lightroom 4 adjustment brush has little effect

    I am using Lightroom 4 because my Mac is on OSX 10.6.8. As I use it today I'm seeing that the adjustment brush is having little effect. I'm trying to bring areas in shadow up a bit, but there's almost no change. The images shows what should be creati

  • Help with NWDI Software Component Installation on CRM 5.0?

    Hello, We are currently running CRM 5.0 on Windows Server 2003 with MS-SQL Server. While installing CRM 5.0 we didn't select the DI (NetWeaver Development Infrastructure) software component as we didn't expect earlier to do any Java development. Now,