Crear un documento que contenga paginas en horizontal i vertical

Antes de contestar a tu pregunta te voy a hacer otra porque no se cómo crear esto tengo un hijo que se va a la universidad en 5 años. Que será mejor un iPad Air 2 o un Mac (teniendo en cuanta el precio y que lo voy a usar yo hasta que se vaya el a la universidad) que me recomienda?

Similar Messages

Sabe alguien cuando saldrá el camera raw que contenga la 30D de Canon?

Hola,
¿Sabe alguien cuando saldrá el camera raw que contenga la 30D de Canon?
Saludos

Brinox:
Ármate de paciencia.
Adobe ha prometido de tres a cuatro actualizacions de ACR (Adobe Camera Raw) por año, o sea una cada tres o cuatro meses. Ojalá tu cámara esté incluída en la próxima version.
Más allá de esa observación, Adobe acostumbra no hacer comentarios sobre versiones futuras de ninguno de sus productos. :/

Sabes alguien cuando saldrá el camera raw que contenga la 30D de Canon?

Hola,
Sabes alguien cuando saldrá el camera raw que contenga la 30D de Canon?
Saludos

Ya lo teneis:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=3364
Camera Raw 3.4 update
This new version of the Camera Raw plug-in replaces the original Camera Raw plug-in that was installed with Adobe Photoshop CS2 and Adobe Photoshop Elements 3.0 and 4.0 software. Visit the Camera Raw page for a complete list of supported cameras.
Support for the following cameras has been added in this update.
Canon EOS 30D
Leaf Aptus 65
Leaf Aptus 75
Olympus EVOLT 330
Olympus SP-320
Pentax *ist DL2
Samsung GX-1S

Word .docs with Horizontally and Vertically oriented pages

I have 30 plus Word .docs that have Horizontally and Vertically oriented pages in them. A new PDF is created each time the orientation changes. Is there a way to have Acrobat keep those in the same PDF?
I am using Acrobat Pro for Mac 10.1.10

As far as I know there are no patches available for the software and OS I am using (I ran the update check on each), but my version of Acrobat Pro is older.
OSX 10.9.4 Mavericks
Acrobat Pro for Mac 10.1.10
Word 2011 14.4.3 (140616)

I'm in a multi-page document, how can i rearrange the pages or insert blank pages in front of pages? Also, is there a way to show the ruler both horizontally and vertically?

I'm in a multi-page Pages document, how can i rearrange the pages or insert blank pages in front of pages? Also, is there a way to show the ruler both horizontally and vertically?

Not on my document. I have a 7 page document open. The "flashing vertical bar" is at the top of page 3. I have the thumbnail view showing. I click page break and two blank pages are added to the end of my document. I have to scrool thru the pages to see that the 2 pages were added as they do not appear in the layout view... I'm not sure if it is inserting a "section" as it adds two blank pages.. But I am clicking on "INSERT PAGE BREAK".. So guess there are still a lot of bugs to fix..
Thanks again

Center text horizontally and vertically on composition?

Hello,
I'm working on a short projects (15 minutes length). Every 30 seconds a title fade in/out against a blank (grey) composition. How do I go about easily centering the text (single word) on the composition both horizontally and vertically? I know I can horizontally center via the paragraphs pallet, but how do I center on the vertical at the same time?
Right now I'm modifying the Anchor Point of the text so it's in the center (visually) of the text, and then set the Position to the center of the composition, but every time I increase the type size, I have to go through this all over again...and with different titles coming up every 30 seconds or so, a simple text size change turns into a lot of work.
I can only image there's a better way to do this and would appreciate any advice for an AE newb!
Thanks,
Kristin.

It is possible to do this via scripting, but it won't be "live", i.e. you would have to run a script to grab the dimensions of the text layer each time you want to update its vertical alignment.
It is also possible to roughly align text vertically using expressions given three limitations:
1) You'll have to be willing to consider the height of the text layer to only extend from the cap height of the first line to the baseline of the last line, meaning descenders and ascenders wouldn't be counted as part of the height of the text layer.
2) You'll have to manually locate the center of the first line of text.
3) You'll have to be happy with a consistent point size and line spacing throughout.
Given those limitations, vertical alignment can be done as follows:
Add a Position animator to your text layer. Delete the default range selector you won't need it. Next add the Line Spacing property to the newly-created animator (using its "Add" menu). In the Character panel, set your text layer's line spacing to 0 (it will really be set to .01, but the difference shouldn't be noticeable once we're done). In the Line Spacing animator, set the desired line spacing (unfortunately, "Auto" isn't an option).
Now set your Text layer's anchor point such that it falls in the center of the text's cap height (the height of a capital letter with no ascender or descenders).
Next, add the following expression to the Position property of the text animator (NOT the Position property of the text layer's Transform group):
>STA = text.sourceText.split("\r");
>value - [0, (STA.length-1)*propertyGroup(countUp = 2).property.lineSpacing[1]]/2
The second line should be all one line, but the forum insists on wrapping it. Be aware that if you later decide to change the point size of the font, you'll need to temporarily disable the text animator and center up the anchor point again.
You can also use this method to force the text layer to shift up to accommodate new lines by deleting the "/2" at the end of the second line of the expression.

Center text in DIV horizontally and vertically.

I made a simple nav bar at the bottom of a site I am building and had it centered horizontally and vertically. When I pulled up the page today the text is all the way to the left and I had no problems with it the day before. I have made no changes to the code. I am using IE9, but I have been since I started this site. Everything seems fine in Firefox. If I turn IE9 to compatibility mode it centers horizontally but not vertically. Any ideas?
http://www.toddsshowcase.com/
http://www.toddsshowcase.com/styles/stylesheet.css

So...instead of this
<div id="containerBottom" style="height:110px; width:947px;">
<div id="idTable"><a href="index.html">HOME</a> | <a href="index.html">ABOUT ME</a> | <a href="index.html">MLS</a> | <a href="index.html">LISTINGS</a> | <a href="index.html">CALCULATOR</a> | <a href="index.html">CONTACT</a></div>
</div>
This?
<div id="containerBottom" style="height:110px; width:947px;">
<div id="idTable">
<div><a href="index.html">HOME</a> | <a href="index.html">ABOUT ME</a> | <a href="index.html">MLS</a> | <a href="index.html">LISTINGS</a> | <a href="index.html">CALCULATOR</a> | <a href="index.html">CONTACT</a></div>
</div>
</div>

In need of a macro to transpose data from horizontal to vertical

I need help creating a macro that would transpose some data from horizontal to vertical.

You just want to transpose some data from horizontal to vertical?
If so ,you can use array formula TRANSPOSE.
Also here is a sample Macro:
Sub Macro1()
' Macro1 Macro
Range("A1:B3").Select
Application.CutCopyMode = False
Selection.Copy
Range("H1").Select
Selection.PasteSpecial Paste:=xlPasteAll, Operation:=xlNone, SkipBlanks:= _
False, Transpose:=True
End Sub
It would be better if you can let us know your current data and what you are trying to achieve.
Wind Zhang
TechNet Community Support

Pdf files print with horizontal and vertical lines

All of a sudden, today, when I print pdf files, they print with horizontal and vertical lines. I thaught it was the computer or printer. So I printed from another computer on the network, and printed to a different printer with the same result. It is not just that one pdf file either, I have tried multiple files. HELP. Does anyone have any ideas?

It is not clear how you are creating the files. It appears that they were created by Distiller from PS files that were created in some way. I also noted that you are using AA8.1.0. You may want to try to update (do all the updates in order) as a possible fix. It may be in the creation process also. Several packages will split large graphics into parts and create the image. I think this is a characteristic of OFFICE 2007 (docx) files - but I am not sure yet. Tell us how you created the files - step by step, including the scan.
If you have the original documents, why not simply print to the Adobe PDF printer. The result would be smaller and a lot cleaner.

Tile horizontal and vertical

Hi all,
I m using internal frame. i m showing a menu which show cascde, tile horizontal and vertical. when i click on tile horizontal it should display all open internal frame in tile horizontal same as for cascade and tile vertical.
how do i proceed
pls solve my problem
regards
Tarique

You have to find the open internal frames. JDesktopPane has a method to do this. Then determine which are showing. JInternalFrame methods can help you here.
For cascading the rest is simple. Pick a starting point, say (0,0) and an ofset value, say 10, iterate over the internal frames. Set the location of the first at (0,0) and then set each succeed frame at a multiple of the offets. Here's the rough code to do that
   int hPos = 0;
   int vPos = 0;
   int step = 10;
JInternalFrame[] frames = myJDesktopPane.getAllFrames();
for ( int i = 0; i < frames.length ; i++){
      frames.setLocation( i * step, i * step);
Horizontal and vertical tiling can be done in a simular manner. You'll probably want to ensure that all frames are the same size ( you can't assume that, users do stupid things). Then laying out tiling will be like above but holding horizontal or vertical step constant and increasing the other by the width or height of the frame.
This is just a quick and dirty response, you may have to adjust some things to get the result you want. But, I think, this will get you going.
Cheers
DB

TableView horizontal and vertical scrolling is horribly slow

How can I adjust the horizontal and vertical scrolling amount?
I used the Ensemble example prorgam and streched the column so that the horizontal scroll bar is displayed. I then used the right scroll button which then scrolls extremly slow. I've looked at the javadoc on the tableview and I cannot determine how to set the scrolling amount. I can check if the table is scrolling but I would like to set the amount to be a column width at a time when using the left or right arrow.

It probably needs to be actually rendered to the Scene graph before the lookups can be made, so the lookups won't work in the initialize method.
There are a number of reasons I don't like this solution
- I don't like the string binding
- the fact that there are scrollbars that are descendant nodes of the table view is not documented, so (at least in theory) a future release of JavaFX could choose not to use the ScrollBar class (for example by creating its own scrolling implementation). This would break the code you have.
- if you decided to create (or use) an alternative skin for the table view which had other scrollbars in place (again, unlikely but theoretically possible), you'd end up setting the unit and block increments of those scrollbars too. In other words, there's no guarantee these are the actual scrollbars you want.
So, not ideal but at least if it works you have something...

Compositions Transition - horizontal and vertical - Problem

Hi,
another problem. I use a full screen composition as seen on the picture below.
Now if i change the transition from fade to horizontal or vertical it crashes the compilation.
So actually only half of the screen can be used now.
Any ideas what could be my mistake?
Thanks alot
Cheers
Cedric

hi saikat,
1) go to the view and then click on the "context" tab .
2) create the context by right clicking on the context . make the cardiality 0:n
3) now after creating the context write click on the conetxt just created and create attributes in the node...remember to give the data types of same kind as required in your scenario
as far as i can guess...you nee three attributes
a) Month
b) employee name
c)salary
4) now go to the layout tab ..
right click on the rootuielementcontainer and chose table .
5) right click on the table and browse the name of the node just created.
6) press the tick mark sign..
7) now you will see a table getting created in the layout just check the right panel on the screen you give the column name as required by you.
8) write logic for fetching the data. as you have not mentioned this part i hopeyou know it
dnt forget to bind the table with the node .in the elogic.
8) excecute the program.
for any further query ask.
regards,
Shitanshu Sahai.

How do I stop needing to scroll both horizontal and vertical in my folders to see all of the content.

How do I stop needing to scroll both horizontal and vertical in my folders to see all of the content.

There is no cancel button.
I don't see a download all button that will download everything from iCloud anyway. The download all button that I see refers only to the particular artist or album that you select from the left had side. I see no download all button for TV Shows or Movies.

Hello' I am having an issue with my iPhone 5 display. 2 days before i've noticed some horizontal and vertical lines on the display. Minor but noticeable. Specially in dark wallpapers and on full brightness. Is it normal?? Please Help!!!

Hello' I am having an issue with my iPhone 5 display. 2 days before i've noticed some horizontal and vertical lines on the display. Minor but noticeable. Specially in dark wallpapers and on full brightness. Is it normal?? Is this a software bug or Hardware problem?? Please Help!!!

Hello,
No, it is not normal. Follow this article:
http://support.apple.com/kb/ht1414
If this doesnt solve the issue your iPhone will need service.
Burcu

How do I flip a photo horizontally or vertically in iPhoto?

How do I flip a photo horizontally or vertically in iPhoto. I can rotate but can't figure out how to flip them.
Thanks

You will have to use another application. Preview will do it. Set up iPHoto to use Preview as the editor of choice. Then double click on the thumbnail to open it in Preview, flip the image and save.
Using 2 Image Editors in iPhoto
If you want to use both iPhoto's editing mode and a 3rd party editor without having to go back and forth to the Preference pane, once you've selected the 3rd party editor as your editor of choice, reset the Preferences back to "Open in main window". Then when you Control-click on an image, you can select "Edit in external editor" in the Contextual menu to edit in your selected editor.

Crear un documento que contenga paginas en horizontal i vertical

Similar Messages

Maybe you are looking for