Creat effect for banner?

Hi
I hope to create a banner ad but the effect that I am after I
do not know what it is called or how to produce it.
In this 50 cents video at the beginning,
http://www.youtube.com/watch?v=psf7W-RjJhI
, you see text letters made out of lights.
Can this effect be created in Flash? What is the name of the
effect? How do I go about making it?
Many Thanks
B

It can be made in Flash but it won't necessarily be easy.
Make a single symbol that's a circle with a glow around it and
construct your letters from that. Once each letter is made, save
that as a symbol then once all your letters are made (hopefully you
can reuse some) then construct your word. Then once your word(s)
is/are made, tween it/them across the screen.
You might be able to emply a 3D engine like Papervision 3D to
get the angle/perspective.

Similar Messages

Created effect on clip in timeline. Want to save it for use later..

     I realize I can't drag a clip from the Timeline into the Event Library. So frustrating. So how do I go about setting that clip aside with the effects I have applied so I can use it later in various places in my timeline. I don't want it in the timeline now. I want to use it later with the effects I have created, or is that not possible?

   I can't seem to do any of that in the event library. As far as I can tell, I can only add effects to clips in the timeline. I have the clip in the timeline and I have created effects. Now I want to remove it from the timeline and not lose the time I have spent creating those effects. I don't want it cluttering up my timeline and I don't want to have to redo all the effects. Is there no way to do this? I'm assuming not. I did find that I could create another event and copy/paste a clip into the event and "save" for later use that way, which seems a really lousy kludge.
   If I'm correct that there is no way to save a clip from the timeline for later use, do you think this is just a temporary failing or just part of the way FCPx will always work. I am continuing to explore how FCPX deals with editing and playing with unimportant footage and keep hitting walls like this. I try to figure out if it's just a paradigm shift I need to make but things like this and the inability to copy/paste attributes and such just make me crazy. I'm working hard to move from the unsupported FCPStudio and I know that Premiere will have its own "make me crazy" issues but these limitations as compared to FCP Studio are really frustrating and I just can't tell when I run into problems that will be addressed in a .X release vs problems that are simply "how it's always going to work in FCPX".

Text Effects for iMovie

I am looking for some plug-in text effects for iMovie 08, I could settle for iMovie HD 6 or Final Cut Express. Specifically I am looking text bubbles or comic bubbles.
Can anyone help me in my search?
Thanks
Gene

I am looking for some plug-in text effects for iMovie 08
iMovie '08 does not currently have a "plug-in" architecture compatible with plug-ins.
I could settle for iMovie HD 6 or Final Cut Express.
iMovie HD v6.0.4 is available as a free download to iLife '08 owners.
Specifically I am looking text bubbles or comic bubbles.
Such effects are easily created with most graphic applications and can be applied from within iMovie '08.

How to create variant for table/view ?

Hi,
When I go through SM30, I find a radio button called variant. I don't know the effect.
Can anyone tell me how to create variant for table / view ?
I want to know when we need to create variant for table/view.
Best regards,
Chris Gu

hi ,
Whenever you start a program in which selection screens are defined, the system displays a set of input fields for database-specific and program-specific selections. To select a certain set of data, you enter an appropriate range of values.
For further information about selection screens, refer to Selection Screens in the ABAP User's Guide.
If you often run the same program with the same set of selections (for example, to create a monthly statistical report), you can save the values in a selection set called a variant
Procedure
To create a new variant:
       1.      On the ABAP Editor initial screen, enter the name of the program for which you want to create a variant, select Variants, and choose Change.
       2.      On the variant maintenance initial screen, enter the name of the variant to be created.
Note the naming convention for variants (see below).
       3.      Choose Create.
If the program has more than one selection screen, a dialog box for screen assignment appears. The dialog box does not appear if the program only has one selection screen. The selection screen appears in this case.
       4.      If there is more than one selection screen, select the screens for which you want to create the variant
5.      Choose Continue.
The (first) selection screen for the report appears.
If your program has more than one selection screen, use the scroll buttons in the left-hand corner of the application toolbar to navigate between them and to fill the fields with values. If you keep scrolling forwards, the Continue button appears on the last selection screen.
       6.      Enter the desired selection values, including multiple selection and dynamic selection.
       7.      Choose Continue.

Do I need to create billing for FD (free delivery) sales order

Hi
I have a question. I created first a sales order (FD) in our sap system. but I don't know whether I need to create billing for the FD order. when I try to create billing for this FD order, SAP cannot to process it.
I also research configuration. in VOV8, SAP not set billing function.
thanks
Henry

Hi henry
If you have created Free of charge delivery (FD) sales order then the item category will be KLN only.After PGI then stock level will reduce and the effect of the stock is that you are issuing stock to customer at free of charge.And as you have assigned cost center then the data will flow to the controlling area and the Financial document after PGI.
Secondly if you assign TANN as a item category and do delivery and then PGI then if the reference document is different then it will have affect as the KMN and TANN item categories doesn't have same features
Regards
Srinath

Subscriber After Effects CC 2014 has the right to license the previous After Effects for free?

I need license the After Effects CS5 for professional use, why do I need create templates for every type of user of After Effects, from CS5 to the CC.
I know there's no way to sign Ae CS5 license, then Ae signing CC will have the freedom to also use the Ae CS5 with same license of CC?
Or is there a way to license the Ae CS5?

There are many versions between After Effects CS5 and the current version of After Effects CC. There are very few users still using the old After Effects CS5.
The current version of After Effects---After Effects CC 2014.1 (13.1)---can open After Effects CS5 files just fine, so you can use the current version to take in work by people still on that very old version.

Compression to FLV for Banner Ad

Looking for some compression feedback, as I cannot get the results dialed in thru Adobe Media Encoder CS4.
Creating a flash banner ad, 11 seconds total, with 5 seconds of video from final cut. The size of the exported .mov is 784 KB, and I still have to hit a target of less than 60KB (yikes) on the final FLV export. Anyone had any luck here in these type of productions? When I convert to FLV (heavily compressed) and import into timeline of flash as embedded file, keeps increasing in size, hovering just below the 1MB mark. Your input is appreciated.
BTW- when you export "for web" from quicktime, could the "small" size it creates really be 4KB??

Thanks, trying there now as well..
But to keep it Apple specific, can anyone shed light on the "export for web settings" thru quicktime pro? The smallest version it creates comes in at 4KB, could this be possible? This is what I am then hoping to convert to FLV.

Need help w/ Photo Slideshow Effects for FCPX

How do i create a background/generator/effect similar to this for my still images for my photo slideshow presentation? Im just using ken burns effect and it looks a little plain for me. I cannot find a plug-in that would give this background effect for my photos. help please!

Here is another: 3D Glass Shelf Effect (see here: http://www.premiumbeat.com/blog/the-big-list-free-fcpx-effects-filters-and-templ ates/)

Turning off "Ken Burns" effect for SOME photos

I see that someone has asked a similar question in the past and told that it's not possible to turn off the Ken Burns effect for some photos, but I'm hoping someone has a workaround or there's a hack...
I've made a slideshow and got the idea to "tell the story" by creating some "title" images in Photoshop elements which I've placed in between a series of photos.
These are just black backgrounds with the title (e.g. "...and the party begins", "Family reunion" etc.) in big white letters. I'm very happy with that idea
I like the Ken Burns effect for the slideshow as it adds some semi-video "action" effect, but NOT on the titles. Having the Ken Burns effect there just looks stupid, so I would like to remove it for the titles alone.
I know I can do it the other way round (go to "Settings" for the Slideshow, deselect "Automatic Ken Burns effect", then manually add the effect for all the photos I want), but with a slideshow album that's going to take ages to do!!
Is there a better way?

Perhaps you're checking the KB button on the "main" menu for the slideshow. That actually changes only the setting for the image that is currently selected. Try using the "Settings" button and deselect the "Automatic KB effect."
John

I am creating box for two coloums in sap script

hi,
i am creating box for two coloums
when i am creating box for this two coloums this box is displaying from the top.
when i am decreasing this hight it is decreasing from the buttom of the window
i want to decrease from the top of window
can u explan plz
this requirement
plzz

see this:
BOX Command
Syntax
/: BOX [XPOS] [YPOS] [WIDTH] [HEIGHT] [FRAME] [INTENSITY]
Effect: draws a box of the specified size at the specified position.
Parameters: For each of XPOS, YPOS, WIDTH, HEIGHT, and FRAME, you must specify both a measurement and a unit of measurement. Specify the INTENSITY parameter as a percentage between 0 and 100.
XPOS, YPOS
Upper left corner of the box, relative to the values of the POSITION command.
Default: Values specified in the POSITION command.
The following calculation is performed internally to determine the absolute output position of a box on the page:
X(abs) = XORIGIN + XPOS
Y(abs) = YORIGIN + YPOS
WIDTH
Width of the box. Default: WIDTH value of the SIZE command.
HEIGHT
Height of the box. Default: HEIGHT value of the SIZE command.
FRAME
Thickness of frame.
Default: 0 (no frame).
INTENSITY
Grayscale of box contents as %.
Default: 100 (full black)
Measurements: You must specify decimal numbers as literal values (like ABAP numeric constants) by enclosing them in inverted commas. Use the period as the decimal point character. See also the examples listed below.
Units of measurement: The following units of measurement may be used:
TW (twip)
PT (point)
IN (inch)
MM (millimeter)
CM (centimeter)
LN (line)
CH (character).
The following conversion factors apply:
1 TW = 1/20 PT
1 PT = 1/72 IN
1 IN = 2.54 CM
1 CM = 10 MM
1 CH = height of a character relative to the CPI specification in the form header
1 LN = height of a line relative to the LPI specification in the form header
/: BOX FRAME 10 TW
Draws a frame around the current window with a frame thickness of 10 TW (= 0.5 PT).
/: BOX INTENSITY 10
Fills the window background with shading having a gray scale of 10 %.
/: BOX HEIGHT 0 TW FRAME 10 TW
Draws a horizontal line across the complete top edge of the window.
/: BOX WIDTH 0 TW FRAME 10 TW
Draws a vertical line along the complete height of the left hand edge of the window.
/: BOX WIDTH '17.5' CM HEIGHT 1 CM FRAME 10 TW INTENSITY 15
/: BOX WIDTH '17.5' CM HEIGHT '13.5' CM FRAME 10 TW
/: BOX XPOS '10.0' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
/: BOX XPOS '13.5' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
Draws two rectangles and two lines to construct a table of three columns with a highlighted heading section.
POSITION Command
Syntax
/: POSITION [XORIGIN] [YORIGIN] [WINDOW] [PAGE]
Effect: Sets the origin for the coordinate system used by the XPOS and YPOS parameters of the BOX command. When a window is first started, the POSITION value is set to refer to the upper left corner of the window (default setting).
Parameters: If a parameter value does not have a leading sign, then its value is interpreted as an absolute value, in other words, as a value that specifies an offset from the upper left corner of the output page. If a parameter value is specified with a leading sign, then the new value of the parameter is calculated relative to the old value. If one of the parameter specifications is missing, then no change is made to this parameter.
XORIGIN, YORIGIN
Origin of the coordinate system.
WINDOW
Sets the values for the left and upper edges to match those of the current window (default setting).
PAGE
Sets the values for the left and upper edges to match those of the current output page (XORIGIN = 0 cm, YORIGIN = 0 cm).
/: POSITION WINDOW
Sets the origin for the coordinate system to the upper left corner of the window.
/: POSITION XORIGIN 2 CM YORIGIN '2.5 CM'
Sets the origin for the coordinate system to a point 2 cm from the left edge and 2.5 cm from the upper edge of the output page.
/: POSITION XORIGIN '-1.5' CM YORIGIN -1 CM
Shifts the origin for the coordinates 1.5 cm to the left and 1 cm up.
Pre-Setting BOX Position Arguments
You can use the POSITION and SIZE commands to preset some arguments in the BOX command. POSITION presets the start point (upper left corner) of a box or line. SIZE specifies the width and height of a box.
You can use POSITION and SIZE to preset arguments, but you can also set the start point and size arguments of a box or line directly in the BOX command.
By default, if no positioning is specified, the upper left corner of a box or halftone or the top of a line is aligned with current SAPscript window. That is, the upper left corner of the box, halftone, or line starts at the upper left corner of the current window in the active form. By default, the height and width of a box are set to the height and width of the current window.
Use POSITION and SIZE to preset the arguments in a BOX command in the following situations:
The BOX command exceeds the 132-character (1 line in SAPscript) length limitation if you specify all arguments directly in the command. You may exceed this length limit if, for example, you use symbols in a command.
By pre-setting arguments with POSITION and SIZE, you can work around the limitation on the length of a command. You do not need to specify the preset arguments in the BOX command.
You want to use the enhanced capabilities of POSITION for adjusting the starting point of a box or line.
With BOX, you can specify an offset for the starting point only as a whole number (non-negative integer). This command would print a box starting 1 CM to the right and 1 CM down from the left upper corner of a window:
/: BOX XPOS '1' CM YPOS '1' CM
With POSITION; you can adjust the position of a line or box relative to a window much more precisely. In the POSITION command, you can specify positive and negative offsets and use non-integer numbers.
Example: The commands shown below position a box slightly to the left and slightly above a window. This leaves a margin between the edge of the box and the text in the window.
/: POSITION XORIGIN '-.2' CM YORIGIN '-.2' CM
/: SIZE WIDTH '.2' CM HEIGHT '.2' CM
/: BOX FRAME 10 TW
(Note that the box must be enlarged to accommodate the shift. If it is not enlarged, then it will not cover all of the window.)
You can also use POSITION to set the starting point to the upper left corner of the active page format. Example: POSITION PAGE moves the starting point from the active window to the active page format.
You want to use the relative sizing capabilities of SIZE to adjust the size of a box, line, or halftone.
With BOX, you can make only absolute size specifications. BOX HEIGHT, for example, overrides the default height setting to the height of the current window.
With SIZE, you can adjust the size of a box or a line with respect to its previously-set dimensions. The following commands would, for example, draw a frame 1 CM in from the margins of the paper:
/: POSITION PAGE
/: POSITION XORIGIN 1 CM YORIGIN 1 CM
/: SIZE PAGE
/: SIZE HEIGHT '-2' CM WIDTH '-2' CM
REWARD IF HELPFUL

I can not write in Hebrew And create effects It shows all distorted When This problem solved?

I can not write in Hebrew
And create effects
It shows all distorted
When This problem solved?

roeisarusi wrote:
When This problem solved?
Nobody knows. iWorks apps have always had bugs that make them unsuitable for Hebrew/Arabic for most people. Tell Apple here:
http://www.apple.com/feedback/keynote.html

Creating Artifacts for "old Movie" look

I'm trying to create a symbol that will go over a silver screen in a project i'm working on. The symbol I want to repeat over and over and create an artifact look. Like how in the old moves you would sometimes get those lines on the sides or splotches.
I've tried doing a mask (So that only a certian amount of space is visable.) but it jsut flashed black and white.

Also, and I know I'm going to get flac for mentioning this, Matrox has a pretty good "Old Movie" effect. We've got the RT.X2 card and I used the effect for some footage a client needed for a Western-themed event. It let you control the amount of dust and scratches, the jitter effect and the grainness as well as making it pure black and white or sepia colored.
If you're looking for a free method, you can create the effect manually using After Effects, but it takes some effort. I'm pretty sure there are some tutorials out there to show you how to do it.
Take a look at this:
http://www.videocopilot.net/tutorial/old_film_look/

Creating Tcode for COPA(KE30) report

Hi ,
i need to create Tcode for KE30 report
through SE93 i tried with option transaction with parameters here i need to give Ke30 report name
for ex :GP4BW2S4QUBUNA68Y2YXMIW8V6X
but program name last 3 letters will change in production system
how to create T-code with out effecting in other system
Thnaks,
kamalakar

Hi,
Try to create custom t-code for KE30report using transaction with Variant.
go to t-code SHD0 and create a transaction variant for the t-code KE30..
and next go to se93> select transaction with Variant> enter transaction and transaction variant and
-->save and activate..
Prabhudas

Creating collages for printing.

Hi I'm new to Photoshop. My daughter gave me Elements 8 ages ago and I have only just downloaded it (was afraid to do so in case it pulled all my thousands of photos from my Windows Photo Pictures in their unedited form (as Picasa did to me ages ago). I have finally taken the plunge and I am now trying to get my head around the programme. The main thing I liked about Picasa was that I could create collages and manipulate the photos into different arrangements and could then print these off. I want to make some place mats with collages of my wildflower photos. Can Elements 8 create collages for printing, and can the photos in the collages be rearranged?.

To answer your last questions... yes and yes!
PSE has tools for automatically creating collages. You can also manually create one by adding pictures to a blank template. In either case the pictures will appear on separate layers which you can then individually resize, rearrange, rotate, overlap, etc. You can crop them to whatever shape you like, add effects such as borders, frames, drop shadows, and add text inside or outside the pictures.
Here is an example I created.

Trouble with creating subdomains for .local address

I'm a web developer on Mac OS X 10.5.6 and I use my MacBook Pro as my primary development and testing machine. I have Apache 2 running and Entropy PHP 5.2.4. All of that works fine. In the past, I didn't use virtual hosts. Instead, I would divide my projects into subfolders of /Library/WebServer/Documents
One day, I wised up and created virtual hosts by adding the appropriate entries to /etc/apache2/extra/httpd-vhosts.conf and by adding a few corresponding hostnames to /etc/hosts.
In the hosts files, I "created" subdomains for each site. For example: If I was working on a site for Dairy Queen, I might add the following line to /etc/hosts:
127.0.0.1 dq.local
Then I would add the virtual host to /etc/apache2/extra/http-vhosts.conf and it would look something like the following:
<VirtualHost *:80>
ServerAdmin [email protected]
DocumentRoot "/Library/WebServer/DairyQueen/Documents"
ServerName dq.local
<Directory "/Library/WebServer/DairyQueen/Documents">
Options FollowSymLinks MultiViews
AllowOverride All
Order allow,deny
Allow from all
</Directory>
</VirtualHost>
I've been setup in the above way for many months and it all works great. On my computer, I can enter dq.local in my browser and it pops right up.
I've even modified the hosts file in my Parallels Virtual machines running Windows. And from any browser in any of my Virtual machines, I can reach my various .local domains hosted by Mac OS X.
*The Problem:* If I want to browse the site from another computer on my local network (or my iPhone), they will not find my MacBook Pro in the .local domain without editing the /etc/hosts files on those devices -- which is a nightmare scenario because A) I can easily edit the /etc/hosts file on the iPhone, B) It's inconvenient to have to edit /etc/hosts files on the myriad of devices, and C) I would have to have my laptop set to a static IP -- something I could easily accomplish, but it's just not as clean of a solution as I'm looking for.
I realized that when using Bonjour, my MacBook Pro shows up to other computers as "Christophers-MacBook-Pro.local". I thought, hmmm ... maybe I could utilize that by dividing it into subdomains. For example, I would modify the vhosts file setting the new domain name to dq.christophers-macbook-pro.local, I would modify my own /etc/hosts file to say:
127.0.0.1 dc.christophers-macbook-pro.local
... and Voila! I'd be done, right? Nope!
Of course on the MacBook Pro that's hosting the sites, I can browse to dq.christophers-macbook-pro.local, and it works fine just like it did when it was dq.local.
On a PowerBook G4 (running a freshly installed and clean 10.5.6), going to dq.christophers-macbook-pro.local results in the wrong site from coming up. What!?
Note that when I go to just "christophers-macbook-pro.local" on the iPhone and the PowerBook, the correct site comes up -- from the MacBook Pro.
Turns out, my xServe running Leopard Server is responding to the request and serving up my photo gallery site on both the PowerBook and the iPhone!
I do have DNS running on the server. The other computers are connected wirelessly and via DHCP from an Airport Extreme Base Station that IS NOT getting DNS from the server, rather it's getting DNS from Comcast. The notbooks and the iPhone are getting DNS from the Base Station.
When I stop the DNS service on my xServe, there's no effect -- the web response is still coming from the server. (Yes, I flushed the DNS cache on the PowerBook just to be sure). I checked the virtual hosts on the server and none of them is configured with a wildcard as an alias. The photo site IS the first entry in the sites list -- the first virtual host.
So, how do I break my MacBook Pro's .local domain into subdomains? What am I missing?

HI,
That's about 6 miles over my head but I can suggest that you post in the Apple Mac OS Technologies forum:
http://discussions.apple.com/category.jspa?categoryID=162
Carolyn

Creat effect for banner?

Similar Messages

Maybe you are looking for