Creat Lock Image...Remote Desktop 3

I have remote desktop 3 and I am trying to put a self made lock image on the computers when they are locked. I went and created it and saved it as a jpg and put it on all the computers that I lock but when I go to lock them it still shows the default lock image. I looked through the manual and did exactly what it said. Has anybody else had this problem or know how to fix it??

The procedure in the manual doesn't work. It's a bug in ARD 3 that has yet to be fixed. For now, the only way seems to be to swap out the Lock.jpg file located in
/System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/
Support/LockScreen.app/Contents/Resources

Similar Messages

System create user after remote desktop

hi
after remote desktop system create many user although i have anti virus updated but it not internet security . Can remote system infect local system ?
Thanks

1. Reformulate your question and add more detailes.
2. Use AV program and update it regularly.
3. Remote infection is possible, namely if you use access that is NOT secured.
Regards
Milos

Downloading programs creates disk image on desktop...

When I downloaded Picasa (and Skype) from the web, it created a disk image instead of just installing the program. When I try to open it from the disk image, it says it is from an unidentified developer and asks for permission to open it. Is there a way to get this to install the program like others?

You should be happy to get a dialog asking for permission and your password - with all the malware all over the internet, it is much safer that way.
Most of the time, you will get a .dmg and you will need to authorize the install - another safety feature.
Now, a new feature of ML is that safety net of any application that does not come from the app store or the developer has not yet signed with Apple that his apps are ok, you will get that dialog. You can turn it off by going to the Security & Privacy Pane in System Preferences > General > and check "anywhere" (you must click the lock and enter your password first). Or, you can leave the default setting, and when you click to open a downloaded app, hit the Control key while clicking to open and you will get a regular "open" dialog.

Windows 2012r2 Remote desktop services: session based: Locked down

I am trying to lock down the remote desktop services sessions , just like I did with windows 2003 TS.
I am following this article :
http://www.it.ltsoy.com/windows/lock-down-remote-desktop-services-server-2012/
I have done till disable registry modifications.
I stopped to check if the changes made were in effect before continuing.
What did work is the disable server manager popup at user logon.
Nothing else seems to have taken effect: just to mention a few
Microsoft administrative tools,
network and sharing center.
ABCD drives are still being seen.
What did I miss ?
regards
Leopold
(first time I am doing gpo with > ms 2003) so maybe I am doing something wrong.)

Hi Leopold,
Here is related article below for you:
How to restrict users from accessing local drives of an RD Session Host server while using RemoteApp programs
http://blogs.msdn.com/b/rds/archive/2011/05/26/how-to-restrict-users-from-accessing-local-drives-of-an-rd-session-host-server-while-using-remoteapp-programs.aspx
If the group policy setting doesn’t take effect, please log off users then log back on.
If the issue persists, please run GPresult.exe to determine whether the setting is applied to users.
Gpresult
https://technet.microsoft.com/en-us/library/cc733160.aspx?f=255&MSPPError=-2147217396
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Group Policy for Remote Desktop Users

Hi,
Currently my users use desktops and have user and computer GPOs applied (typical things like logon scripts etc.) at the OU level where they reside e.g. Finance Users, Sales Users etc.
I am planning a Remote Desktop 2012 environment.
I have read the following:
TechNet cc779327
So, my understanding is that I create a new OU for my Remote Desktop Server only (not users), and create a new security Group for my RD Users and a security group for my RD server.
Remote Desktop Servers OU
* RD User GPO (filter on RD User security Group and RD Computer Security Group)
* RD Computer GPO (filter on RD User security Group and RD Computer Security Group)
I then apply all computer settings to the RD Computer GPO (loopback processing, Windows installer, hide shortcuts etc.).
I then apply all user settings to the RD User GPO (app specific, templates etc.)
Why not consolidate the two GPOs into one?
If I set computer settings in the computer GPO, and apply it as above to filter to the RD Server group and RD Users Group will this apply to only users un the RD User Group...or ALL users since I added the server to the filter?
If a user currently gets a setting in their normal OU e.g. Finance logon script, will they still get it on the Remote Desktop? Or do I need to copy that GPO setting to my new RD User GPO also?
Am I right to add both RD Server and RD User groups to the filter on both RD User and RD Computer GPOs?
Loopback processing - merge or replace typically for Remote Desktop?

Hi,
Thank you for posting in Windows Server Forum.
Create OU for RDS Server in Active Directory. Create security group for users who will use Remote Desktop Host (i.e. RDS Users). Create GPO (i.e. RDS Server Lock Down). In Security Filtering delete Authenticated Users, add RDS Server Account, and the security
group created in previous step.
Please check beneath article might useful for better understanding.
Lock Down Remote Desktop Services Server 2012
How to secure your remote desktop server with GPO
Hope it helps!
Thanks,
Dharmesh

Remote desktop not working with dot1x authenticated machines

Hi,
we are using machine and user authentication , when machine at logoff the machine is authenticated so users can RDP to it
but after logging in the remote desktop session goes down because after user authentication the machine gets a new ip address .
is there any way to avoid this issue ?

I am back after a hectic week on this issue...I could find out something very interesting... At times of convergence, the new path takes sometime to calculate the MRU... Mean to say when you issue the command ping mpls pseudowire destn .. The new path has an MRU of 0 for some 5 seconds..After 5-6 seconds MRU comes back with 1700..This screws up the applications like mail synchronization etc.
Apart from this I found a lot of OSPF flapping due to aggresive BFD timers also, which creates issues with remote desktop. I am unable to convince myself on the MRU issue why it happens. IOS issues on 6524??

Remote Desktop Not working with EoMPLS

I am hosting a HVPLS domain on my 7613 Core router where my spokes (6524ME) terminate the port based Pseudowires. All spokes have an MTU size of 1522. The clients are have intermitent problems with Windows Remote Desktop and mail synchronization. This clearly is an indication of an MTU issue. After doing a little bit of research I found, I need to decrease the MTU to make RDP work properly. Is it possible to reduce MTU of an L3 port to less than 1500?. Can i adjust my tcp-mss on the port where my xconnect is originated?
Thanks in advance guys..

I am back after a hectic week on this issue...I could find out something very interesting... At times of convergence, the new path takes sometime to calculate the MRU... Mean to say when you issue the command ping mpls pseudowire destn .. The new path has an MRU of 0 for some 5 seconds..After 5-6 seconds MRU comes back with 1700..This screws up the applications like mail synchronization etc.
Apart from this I found a lot of OSPF flapping due to aggresive BFD timers also, which creates issues with remote desktop. I am unable to convince myself on the MRU issue why it happens. IOS issues on 6524??

System Image Utility - Create User - Activate Remote Management

When creating an image with system image utility, based on a DVD image instead of a cloned image, I cannot create a user and activate Remote Management.
I have created an installer package with Apple Remote Desktop that is supposed to do both, however it doesn't work. I do not get an error, but no user is created.
I have tried a post-install script however the dscl command is not recognized even if I put the path /usr/bin/dscl.
I even tried to use a popular package out there called "createUser" but that fails as well.
Has anyone had any luck with this when trying to make a moduler image with System Image Utility?
Message was edited by: NeedSomeAnswer

After configuring all the appropriate settings, I
push the "Create" button and it appears to start
working, prompts me for a location to save the actual
image itself, creates a folder with the default name
and then nothing happens.
ok here's the deal: i created a folder in my OSX server home directory labelled "images" and keep our multiple images there. although you CAN have your images on other drives or on the network, that would take a LOOOOOOOONG time to do the data transfer to the invisible netboot folder on your server. my advice: keep local copies of all images. save a ton of time for yourself, eh?
then, when it's time to use the system image suntility to load up an image, i go to that same location each time, call it up and have the app set to the prefs i want or need. i'm on 10.4.7 server and have had no problem using the software.
so try using images locally and then, if that doesn't work, upgrade to 10.4.7

Create a 1-click setup for a Remote Desktop session for non-tech users

Hi everyone,
I know how to configure a VPN or use port forwarding for VNC, ARD, etc. and know about iChat's Screen Sharing feature and sites like LogMeIn. But I'm looking for something special here. This is the situation:
• A user calls me for help and I would prefer a Remote Desktop session
• He's usually behind a NAT router which hasn't been set up to allow remote access
• He's absolutely NOT tech savy
So I'd like to have an easy way to allow me to initiate a Remote Desktop session (ARD/VNC) with as little user interaction needed as possible. I don't want to walk him through reconfiguring his router on the phone!
I was thinking of using iChat's Screen Sharing first. But I'd need to create a jabber account, save iChat's preference file, maybe pack it into a little "Installer" and mail it to him. So all he needs to do is double-click it and run iChat afterwards and accept me.
But this is a little too much for my taste and I'm wondering if there isn't already a "best practice" or something like that. Any ideas or suggestions?
Thanks a lot!
Björn

I've recently started using TeamViewer. If you can walk a person through going to http://www.teamviewer.com and clicking on "Start Full Version" and getting them to download it and run it, then you're good to go. It's cross-platform both ways so you can control a Mac from a PC and a PC from a Mac in addition to M-M and P-P. If they're on a PC, the download is an executable which when they double-click it, asks them if they'd like to run it or install it. Just have them run it and in a few seconds they will have an ID number and random password generated that they can tell you over the phone. Then you type it into your TeamViewer app and you're controlling their screen. If they're on a Mac, the download is a disk image so you have them mount it and then just run the app directly from the disk image. Once you're connected you can fully install the app for future use or just help them out. It's pretty much the simplest cross-platform control system I've found to deal with situations where it's not already setup for me to support. On top of all that, it's free for personal use!
Jeff

Problem with remote desktop and lock screen

I know of the easy way to immediately lock a Mac's screen by clicking the menu bar lock icon from KeychainAccess. This works on every system under my control (rMBP running Mavericks, MacMini with 10.5 and Mavericks). However when I control the Macs via Remote Desktop (currently 3.7.2), that lock icon behaviour changes.
Trying to lock a 10.5 system, the screen inside the Remote Desktop window goes black immediately. Moving the mouse activates the password dialog. That is what I want. Doing the same in a remote Mavericks system, the screen goes to a dark blackish semi-transparent state. Moving the mouse immediately restores the normal desktop view, no password asked. Is this a feature or a bug in Remote Desktop? This change in behaviour must have come in around Lion or Mountain Lion.
---markus---

Hi
Do you use the Intel Proset Utility to configurate the WLan connection?
Try to configure the WLan using this tool and check if the Wlan would disconnect again.
Im also interesting what Wlan driver did you use?
Did you use one from the Intel page?
If not, check the Intel page for the newest WLan driver version.

Using Apple Remote Desktop to Deploy Filemaker Pro 10 /Create Filemaker pkg

I need to deploy Filemaker Pro 10 to a number of Macs in our office, all of them with Apple Remote Desktop installed.
I have the FileMaker Pro 10 installation file (it's listed as an .app) and the text file called "assisted install."
If I have these two files in the same folder, I can run them and it will allow myself (or the user) to install FileMaker with only a few "continue" clicks.
I am, however, trying to streamline the process by creating a package (.pkg) so that I can deploy the software using Apple Remote Desktop (I'm using version 3.2.2).
I am, however, a Package Maker novice, and am not sure if this is more pain than it's worth.
Is there anyone out there who has done or tried to do something similar to what I'm trying?
Is there another way using Apple Remote Desktop (besides controlling each individual pc to install the program) to deploy FileMaker Pro 10?
Thanks in advance for any help.

Thanks for the suggestion. Since I don't want to spend money, I decided to go with InstallEase from LanREV.
As I was getting ready to write this off as done, one possible problem occured to me.
When FileMaker installs, it automatically puts in the username as whatever the current installing user is. You might not be able to answer this, but I'll ask anyway.
If I use InstallEase to take a snapshot of my system before install, then after, and use that package to deploy... is it going to show my name as the username on everyone's systems, or will it figure it out on its own?
I'm going to see if I can scrounge up a test mac to see if my theory proves correct or not, but in the meantime, feel free to answer if you already know what will happen.

How to create Remote Desktop Application in C# or port it from HTML5/JS project ?

Hi
How can create Remote Desktop Application in C# template ? I were searching on google but not found example or API for this.
If can, please suggest for me some solution, example and document.
And I have JavaScript project template Remote Desktop Application. Can i port it to c# ? Or use Webview to show it ?
I were create demo use webview to show it but it not run. Maybe i do some mistake or can't be do it.
Thanks.

I have no other options. We already provide the RDP plug-in for JavaScript. I'm not sure what else is needed for this.
Matt Small - Microsoft Escalation Engineer - Forum Moderator
If my reply answers your question, please mark this post as answered.
NOTE: If I ask for code, please provide something that I can drop directly into a project and run (including XAML), or an actual application project. I'm trying to help a lot of people, so I don't have time to figure out weird snippets with
undefined objects and unknown namespaces.
My project needs work with C# Windows Store. So I need RDP on C#, not JS. If we don't support C#, do we have a RDP spec on Windows 8.1 so that we can follow that spec to implement with native code to support RDP?

I am surprised to see that Remote Desktop Client update 3.7.1 been updated without my authorisation and creating now lot of problems from December 7, 2013, any one can tell, how?

Remote Desktop Client update 3.7.1 has been updated without any permission and now creating umpteen number of problems since December 7, 2013. Now my gmail is empty and unable to see any email. Most of the time my local host is: 92.242.132.27, I do not know why?
Now I want to uninstall my update 3.7.1.
I seek help to resolve my problem.
Traceroute has started...
traceroute to www.localhost.com (92.242.132.27), 64 hops max, 72 byte packets 1 192.168.1.1 (192.168.1.1) 1.554 ms 0.995 ms 0.972 ms 2 abts-tn-dynamic-001.0.164.122.airtelbroadband.in (122.164.0.1) 28.460 ms 3 abts-tn-static-093.227.95.61.airtelbroadband.in (61.95.227.93) 27.732 ms 4 61.95.240.129 (61.95.240.129) 27.433 ms 28.015 ms 27.758 ms
5 59.145.7.133 (59.145.7.133) 187.777 ms 186.806 ms 236.866 ms 6 182.79.243.18 (182.79.243.18) 179.356 ms 179.188 ms 178.033 ms 7 182.79.248.234 (182.79.248.234) 178.512 ms 179.033 ms 179.084 ms 8 aes-static-029.37.144.59.airtel.in (59.144.37.29) 178.879 ms 177.540 ms 9 xe-0-0-0-0.edge00.thn.uk.hso-group.net (195.66.224.226) 177.235 ms 178.6
10 xe-0-0-0.edge00.the.uk.hso-group.net (93.89.91.13) 177.571 ms 177.667 ms 11 ert1-the-gi1-8.router.uk.catalyst2.net (93.89.90.10) 187.420 ms 185.670 12 84.18.192.130 (84.18.192.130) 178.729 ms 178.521 ms 178.316 ms 13 * * *
14 * * * 15 * * * 16 * * * 17 * * * 18 * * * 19 * * * 20 * * * 21 * * * 22 * * * 23 * * * 24 * * *

Remote Desktop Client update 3.7.1 has been updated without any permission and now creating umpteen number of problems since December 7, 2013. Now my gmail is empty and unable to see any email. Most of the time my local host is: 92.242.132.27, I do not know why?
Now I want to uninstall my update 3.7.1.
I seek help to resolve my problem.
Traceroute has started...
traceroute to www.localhost.com (92.242.132.27), 64 hops max, 72 byte packets 1 192.168.1.1 (192.168.1.1) 1.554 ms 0.995 ms 0.972 ms 2 abts-tn-dynamic-001.0.164.122.airtelbroadband.in (122.164.0.1) 28.460 ms 3 abts-tn-static-093.227.95.61.airtelbroadband.in (61.95.227.93) 27.732 ms 4 61.95.240.129 (61.95.240.129) 27.433 ms 28.015 ms 27.758 ms
5 59.145.7.133 (59.145.7.133) 187.777 ms 186.806 ms 236.866 ms 6 182.79.243.18 (182.79.243.18) 179.356 ms 179.188 ms 178.033 ms 7 182.79.248.234 (182.79.248.234) 178.512 ms 179.033 ms 179.084 ms 8 aes-static-029.37.144.59.airtel.in (59.144.37.29) 178.879 ms 177.540 ms 9 xe-0-0-0-0.edge00.thn.uk.hso-group.net (195.66.224.226) 177.235 ms 178.6
10 xe-0-0-0.edge00.the.uk.hso-group.net (93.89.91.13) 177.571 ms 177.667 ms 11 ert1-the-gi1-8.router.uk.catalyst2.net (93.89.90.10) 187.420 ms 185.670 12 84.18.192.130 (84.18.192.130) 178.729 ms 178.521 ms 178.316 ms 13 * * *
14 * * * 15 * * * 16 * * * 17 * * * 18 * * * 19 * * * 20 * * * 21 * * * 22 * * * 23 * * * 24 * * *

Start remote desktop from windows lock screen

Is it possible to invoke remote desktop from the lock screen of a host machine without interfering with any active session on that host machine? The host machine might have been locked by someone who had just walked away from it or the host machine may
be being used remotely by its regular user. But despite this i would like to use it to run a remote session to my regular machine.

Hi,
The answer is no, Lock screen aims to protect user's profile and system resources securitry, Remote desktop need to use system rescoures, such as Printer, Drives, and so on. Therefore, it's impossible to start remote desktop from Widnows lock screen.
Roger Lu
TechNet Community Support

"Licensing timed out" when creating to Remote Desktop Connection

Our company have two site (SiteA and SiteB), both have its own DC (SiteA.xx.local and SiteB.yy.local). A Windows 2012 Server setup a Terminal Service. All SiteB user will use remote desktop to connect to the Terminal Server.
Sometime it will prompted an error "A licensing error occurred while the client was attempting to connect (Licensing timed out). Please try connecting to the remote computer again." Before this error message shown, the connection box
will show the status "Estimating connection quality" for a while (my last test this will stay for 2 min 30 sec. before Licensing timed out prompt).
When we face this error, the only way to solve it is to reboot the Terminal Server. Once reboot, everything will be fined, all user can connect again. But sometime later (no fixed time period, from two hours - two days), user
will then have this problem. But we need to reboot server again.
I can't found in what situation this error will happened. But we do experienced the following situation.
1. Sometime the a RDS Connection just stopped directly. Then try to reconnect but failed. In this case, all other users are still using it.
2. I try to unplug a network connection for a client, it show the connection is lost and trying to reconnect. After I plug the network back. Cancel the reconnect process. Then open the remote desktop again it will have the error.
3. there has two machine will never have this problem (we have this problem for 3 months). no matter how the connection lost. it can built up the connection once the connection is back
I followed some forum to enable the netlogon.log. On the Server, I found:
1. [MISC] [872] In control handler (Opcode: 4): This log must there when the problem happened.
Not sure if the following log help:
1. NetpDcGetName: SiteA.xx.local. using cached information ( NlDcCacheEntry = 0x000000DE96694D50 )
2.DsGetDcName function returns 0 (client PID=2088): Dom:SiteA Acct:(null) Flags: NETBIOS RET_DNS
3. NetpDcInitializeContext: DSGETDC_VALID_FLAGS is c03ffff1
4. DsGetDcName function called: client PID=23532, Dom:(null) Acct:(null) Flags: LDAPONLY RET_DNS (I found some log will be Dom:SiteA install of Dom:(null) )
5. NlTimeoutApiClientSession: Unbind from server \\SiteA-DC.Stingmars.hk.local (TCP) 0.
6. NlPrintRpcDebug: Couldn't get EEInfo for I_NetLogonSamLogonEx: 1761 (may be legitimate for 0xc000006e)
On the Client side: Not sure if the log can help:
07/11 11:56:01 [MISC] DsGetDcName function called: Dom:(null) Acct:(null) Flags: DS
07/11 11:56:01 [DNS] NlDnsHasDnsServers: DNS Server is NOT configured on this machine.
07/11 11:56:01 [MISC] NetpDcInitializeContext: DSGETDC_VALID_FLAGS is c01ffff1
07/11 11:56:01 [MISC] NetpDcGetName: SiteB using cached information
07/11 11:56:01 [MISC] DsGetDcName function returns 0: Dom:(null) Acct:(null) Flags: DS
07/11 11:56:01 [MISC] DsGetDcName function called: Dom:(null) Acct:(null) Flags: FORCE DS
07/11 11:56:01 [DNS] NlDnsHasDnsServers: DNS Server is NOT configured on this machine.
07/11 11:56:01 [MISC] NetpDcInitializeContext: DSGETDC_VALID_FLAGS is c01ffff1
07/11 11:56:01 [MAILSLOT] Sent 'Sam Logon' message to SiteB[1C] on all transports.
07/11 11:56:01 [CRITICAL] NlBrowserSendDatagram: No transports available
07/11 11:56:01 [CRITICAL] NetpDcGetNameNetbios: SiteB: Cannot NlBrowserSendDatagram. (1C) 53
07/11 11:56:01 [MISC] NetpDcGetName: NetpDcGetNameNetbios returned 1355
07/11 11:56:01 [CRITICAL] NetpDcGetName: SiteB: IP and Netbios are both done.
07/11 11:56:01 [MISC] DsGetDcName function returns 1355: Dom:(null) Acct:(null) Flags: FORCE DS
07/11 11:56:02 [MISC] DsGetDcName function called: Dom:(null) Acct:(null) Flags: LDAPONLY RET_DNS
07/11 11:56:02 [DNS] NlDnsHasDnsServers: DNS Server is NOT configured on this machine.
07/11 11:56:02 [MISC] NetpDcInitializeContext: DSGETDC_VALID_FLAGS is c01ffff1
07/11 11:56:02 [MISC] NetpDcGetName: SiteB using cached information
07/11 11:56:02 [MISC] DsGetDcName function returns 0: Dom:(null) Acct:(null) Flags: LDAPONLY RET_DNS
07/11 11:56:03 [SESSION] V6 Winsock Addrs: fe80::bd63:1d49:d8fd:724%12 (1) V6WinsockPnpAddresses List used to be empty.
07/11 11:56:04 [MISC] NlPingDcNameWithContext: Ping response timeout for SiteB-DC.Stingmars.cn.local.
07/11 11:56:04 [CRITICAL] NlPingDcNameWithContext: Can't ping the DC SiteB-DC.Stingmars.cn.local.
07/11 11:56:04 [MISC] NetpDcInitializeContext: DSGETDC_VALID_FLAGS is c01ffff1
Thanks
Kenneth Lai

Hi Kenneth,
Thank you for posting in Windows Server Forum.
Please check the setting and workaround as per below thread.
RDP connection hangs on "estimating connection quality"
http://social.technet.microsoft.com/Forums/en-US/18819bef-5c01-4849-9c61-afb7e8c8a581/rdp-connection-hangs-on-estimating-connection-quality?forum=winserverTS
In addition, also check below details.
Cause: If you are using Internet Protocol security (IPsec) to help protect traffic over TCP between clients and terminal servers, then packet fragmentation might occur. As a result, some packets might not reach their destination, and
client connections to terminal servers might fail.
Solution: Configure IPsec to help protect traffic over UDP rather than over TCP.
Hope it helps!
Thanks.
Dharmesh Solanki

Creat Lock Image...Remote Desktop 3

Similar Messages

Maybe you are looking for