Create 10g Database with ASM on Windows Server 2003 x64

I am running Windows 2003 Server Enterprise x64 on a Dell server and wish to install Oracle 10g 10.2 with ASM.
First, I performed a software only install. Then, I created several raw partitions on each of two SATA2 disks, and created a disk group - DGROUP1 - using two partitions from each disk. So far so good.
Next, I tried to use DBCA to create a general purpose database using ASM, and that is where the problem arose. I can use sqlplus to stop and start the ASM instance, but when I use DBCA to select ASM for storage I am asked for the SYS password for ASM. I enter it and get a message "Passwords cannot be verified because: Io exception: The network adapter could not establish the connection". If I ignore this I can go on to select my DGROUP1, but the installation ultimately fails due to "insufficient privileges".
Can anyone please help?

Hi Martin
Thanks for the reply. I used ASMTOOLG to stamp the disks and then used DBCA and followed the description hereo create the disk group DGROUP1:
http://www.databasejournal.com/features/oracle/article.php/3571371
At one point, DBCA prompted me to run "localconfig add", which I did.
If it is a missing password file that is the problem, is it possible to create one to put things right?
Charles

Similar Messages

Db 11gR1 11.1.0.7 Certified With EBS 12.1.1 on Windows Server 2003(x64)

Hi;
I just read this and want to share Steven Chan's good news :
Database 11gR1 11.1.0.7 Certified With EBS 12.1.1 on Windows Server 2003 (x64) for details please visit :
http://blogs.oracle.com/stevenChan/2009/10/database_11107_ebs1211_winx64.html
Regard
Helios
Edited by: helios on 26.Eki.2009 07:30

Hi,
Thanks for sharing the document, but I would suggest you change the link to the following as the link above points to the main blog link ;)
http://blogs.oracle.com/stevenChan/2009/10/database_11107_ebs1211_winx64.html
Regards,
Hussein

How to install Oracle 9i (9.2.0.2) in Windows Server 2003 x64 - Intel Xeon

I have tried to install Oracle 9i (9.2.0.2) in Windows Server 2003 x64 Enterprise Edition with Intel Xeon (EM64T) processors.
When I run setup.exe I get an error: "The image file C:\Documents and settings\administrator.SERVERNAME\my documents\92021 win64_disk1\setup.exe is valid, but is for a machine type other than the current machine".
I have to install Oracle 9i in that server but I can't run the installation. Is there a way to solve this problem, is there a patch that can solve this? Anyone know something about this problem?
Thanks a lot!!!
I'm desperated!!

Hi,
reply to my own question:
In the docs provided with the downloads for Oracle Database Server 9i x64, I found that this version requires either
- Windows Server 2003 Datacenter Edition for 64-Bit Itanium 2 Systems
or
- Windows Server 2003 Enterprise Edition for 64-Bit Itanium 2 Systems
So I guess, the only X64 platform being supported under Windows Server 2003 (both Datacenter / Enterprise Editions) is Itanium CPUs ...
... though this is not (!!!) clearly stated in the download link (other/newer versions are listed more precisely - I guess it's a matter of an old link: no Intel Xeon / AMD Opterons were available (???) when Oracle 9i database server was published).
So I'll give it a try with 10g database server ;-)))
Regards,
Thomas Heß

Windows 7 x64 can't read/install any printer drivers from Windows Server 2003 x64 (AMD64 folder and HP Deskjet 855c)

I read the thread Widows 7 printer
HP deskjet 855c driver about possible installation of HP855c drivers onto Windows 7 x64 from "Windows Server 2003 x64" CD but I didn't have enough luck to succeed with doing it on my laptop. That thread appears to be dead now
as it is marked "Answered", so I'm asking for help here. I have Toshiba Satellite P500 with Windows 7 Home Premium 64-bit (http://i55.tinypic.com/2zgth6v.jpg).
Let me tell you first that I don't have access to Windows Server 2003 x64 or XP Pro 64 CD's. However I did some research online, which eventually forced me to learn about the "file sharing". After extensive search I was able to get the copies
of AMD64 folders from Windows Server 2003 R2 Standard x64 with SP2 and
XP Pro 64. The reason that I went also after XP Pro was because I thought that the extra wording "R2 Standard x64 with SP2" in description of "Windows Server 2003" did not reflect the exact name provided by poster
Alan. I couldn't find just "Windows Server 2003 x64" (does it matter?).
Anyway, I followed first the drill with running "printui /s /t2" and disabling UAC, and then in both cases I was able to locate the
NTPRINT.INF file (http://oi51.tinypic.com/9qwvt2.jpg - this image is from XP Pro AMD64 folder) but each time when I
attempted to install the driver, I got the same message stating:
"The folder you specified doesn't contain a compatible software drive for your device. If the folder contains the driver, make sure it's designed to work with Windows for x64-based systems." (http://oi53.tinypic.com/27yveiw.jpg)
Why aren't there x64 drivers?
During several installation attempts I had the printer connected to or disconnected from my laptop. It didn't make any difference. I must add that for this purpose I had to use different cable than the original one designated only for the
Parallel port in my old desktop with Windows XP. My new laptop with Windows 7 x64 came only with 3 USB ports (plus 1 HDMI and 1 Serial). Because of that situation I bought in advance a new printer cable called “USB to 36-pin Parallel Port Adapter
Cable” (http://www.amazon.com/gp/product/B003A8I75E). I'm not sure, if it will work until I can install the printer.
Besides, nobody talked about this issue yet. I was also playing with the port choices in "Add printer" step; changing from default LPT1 to USB001 with the same negative results.
I don't know what I'm doing wrong. I was very hopeful after reading positive "case closed" notes there.
Can anyone help me here, maybe by making the necessary files available for download? I'm willing to pay for such assistance or make a donation, if necessary. Seriously. Judging by the large number of views of the original
thread, one could assume that there is a potential demand for such service. It would be more human to pay few bucks for a few driver files than $900 for the whole Windows Server 2003 x64 CD, no? Can Microsoft accomodate me/us, please? :)
Andrew*
P.S. I was advised to come for help here from
http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/windows-7-x64-cant-readinstall-any-printer-drivers/4e7d06e1-33a5-4597-be70-4fdc087a63a7?msgId=9a045994-0d31-4d40-b17d-dba372393ee4

I have my HP 855c/driver working on Win 7 Ultimate x64. I used the 'printui /s' procedure and 4 files described above with some minor changes.
I pulled WindowsServer2003.WindowsXP-KB914961-SP2-x64-ENU.exe down from the Microsoft website. Running the file causes the exe to unpack into a temp folder at the root drive. A 'Setup Error' message box is displayed once the file is run. I left this
message box up until I copied ntprint.inf, ntprint.cat, and sp2.cab from the temp folder.
I copied driver.cab from a Windows XP Pro disc. I also needed amd64\stdnames.gpd which was already in my Windows 7 c:\windows\system32\spool\drivers\x64\3 folder.
I created a folder with the 5 files (ntprint.inf, ntprint.cat, sp2.cab, driver.cab, and amd64\stdnames.gpd). This is my 'Have Disc' folder.
I followed the 'printui /s' instructions, first changing the permissions mentioned above and then installing the driver. Next I followed the instructions to add a printer from Control Panel 'Devices and Printers' - 'Add Printer', choosing to 'use an existing
driver' when installing the HP 855c.
I used a slightly different ntprint.inf, size 1570418. The readable contents of ntprint.inf is as follows. Notice the line 'CatalogFile=ntprint.cat' is not included. I tried using the 1570468 version of ntprint.inf; when I did I received an incompatibility
message (probably the same one mentioned above).
; NTPRINT.INF (for Windows Server 2003 family)
; List of supported printers, manufacturers
[Version]
Signature="$Windows NT$"
Provider=%MS%
; LayoutFile=layout.inf
ClassGUID={4D36E979-E325-11CE-BFC1-08002BE10318}
Class=Printer
DriverVer=10/01/2002,5.2.3790.4533
[ClassInstall32.NT]
AddReg=printer_class_addreg
[printer_class_addreg]
HKR,,,,%PrinterClassName%
HKR,,Icon,,"-4"
HKR,,Installer32,,"ntprint.dll,ClassInstall32"
HKR,,NoDisplayClass,,1
HKR,,EnumPropPages32,,"printui.dll,PrinterPropPageProvider"
Good luck

HELP on OBIEE and Hyperion BI on same Windows Server 2003 x64 machine

Hi everyone,
I am having problems when installing OBIEE 11G and Hyperion BI on the same machine.
The problem seems to be Weblogic crashing and not being able to have both of these products on the same machine. Only either one will work.
Details:
Steps involved:
1. Install
Windows Server 2003 x64 SP2
2. Install
SQL Server 2005 x64 SP3
3. Install Hyperion 11.1.2 for 64bit Modules:
- Foundation
- EPMA
- Calculation Manager
- Essbase
- Planning
4. Configure Hyperion Modules using DB SQL Server 2005 x64
5. Install and Configure using DB SQL Server 2005 x64
Oracle RCU for 64bit
6. Install Oracle BI for 64bit and Configure using DB SQL Server 2005 x64
Result:
Fails to start services for either Hyperion Products or Oracle BI.
Anyone can provide correct steps?

I have my HP 855c/driver working on Win 7 Ultimate x64. I used the 'printui /s' procedure and 4 files described above with some minor changes.
I pulled WindowsServer2003.WindowsXP-KB914961-SP2-x64-ENU.exe down from the Microsoft website. Running the file causes the exe to unpack into a temp folder at the root drive. A 'Setup Error' message box is displayed once the file is run. I left this
message box up until I copied ntprint.inf, ntprint.cat, and sp2.cab from the temp folder.
I copied driver.cab from a Windows XP Pro disc. I also needed amd64\stdnames.gpd which was already in my Windows 7 c:\windows\system32\spool\drivers\x64\3 folder.
I created a folder with the 5 files (ntprint.inf, ntprint.cat, sp2.cab, driver.cab, and amd64\stdnames.gpd). This is my 'Have Disc' folder.
I followed the 'printui /s' instructions, first changing the permissions mentioned above and then installing the driver. Next I followed the instructions to add a printer from Control Panel 'Devices and Printers' - 'Add Printer', choosing to 'use an existing
driver' when installing the HP 855c.
I used a slightly different ntprint.inf, size 1570418. The readable contents of ntprint.inf is as follows. Notice the line 'CatalogFile=ntprint.cat' is not included. I tried using the 1570468 version of ntprint.inf; when I did I received an incompatibility
message (probably the same one mentioned above).
; NTPRINT.INF (for Windows Server 2003 family)
; List of supported printers, manufacturers
[Version]
Signature="$Windows NT$"
Provider=%MS%
; LayoutFile=layout.inf
ClassGUID={4D36E979-E325-11CE-BFC1-08002BE10318}
Class=Printer
DriverVer=10/01/2002,5.2.3790.4533
[ClassInstall32.NT]
AddReg=printer_class_addreg
[printer_class_addreg]
HKR,,,,%PrinterClassName%
HKR,,Icon,,"-4"
HKR,,Installer32,,"ntprint.dll,ClassInstall32"
HKR,,NoDisplayClass,,1
HKR,,EnumPropPages32,,"printui.dll,PrinterPropPageProvider"
Good luck

Cannot print to PDF Printer in Windows server 2003 x64 (Adobe 9 STD)

Hi everyone,
I'm running into a very odd issue. We are using Citrix Presentation Server 4.5 in our environment. Recently, I install the x64 bit version of Citrix on top of Windows Server 2003 x64.
The problem that we are experience right now is that when user open a WORD or EXCEL document and try to print to PDF. The SAVE AS windows shows up to allow users to save, but nothing happens afterward. In another word, no PDF file is created.
However, if I ask the user to right click on the file (in windows explorer) and choose Convert to PDF, then the conversion go through.
Do you know a fix for this?

You might read the EULA and confirm the issue I have mentioned. I might not be correct in my estimate, but just gave a sounds like opinion. If it is a violation, then removing it is wise. Typically, Acrobat must be installed on each individual machine. There are multiple license options and server options, but you would need to contact Adobe for more information on those areas. Hope you can get them to talk to you in such a case.

JDK 1.4.2 version for Windows Server 2003/x64 on Intel Xeon 64 bit processo

Hi,
I'm currently installing a SAP Netweaver Server on a Windows Server 2003/X64 (Intel Xeon CPUs).
The server requires a JDK 64 bit with minimum version 1.4.2_09. Version 1.5.0_00 and higher are not supported by SAP.
I have searched on the J2SE 1.4.2 download page and I haven't found any windows 64 bit except for Itanium processors.
SAP mention clearly on its web portal that it supports Windows Server 2003/X64 64bit with Sun JSE 1.4.2 64 bit.
Any help?
Thanks,
adaif

Hello,
I ran into the same problem searching for the 1.4.2 JDK for Windows x64 platform and found this discussion post. It was helpful!
Could you tell me where to download the JCE policy files from? Do they need to match the same JDK version (1.4.2)?
The Install Guide for SAP NetWeaver 7.0 SR3 Java on Windows MS SQL Server says to download the JCE policy files for your platform (Windows x64) from http://java.sun.com/javase/downloads. But I could only find jce_policy-6.zip. Is that the right JCE policy files for Windows 2003 x64 64bit platform for SUN JSE 1.4.2 64bit?
Thanks,
Asif

HP LaserJet Pro MFP M127fn - Windows server 2003 X64 Drivers Missing

Hi,
We have almost 80 Numbers HP 1212 MFP Printer which we are using in windows server 2003 X64 Operating System. Because of unavailablity of this model anymore, we are using HP Laserjet Pro MFP M127fn and the driver is missing for this operating system.
Anyone have Drivers or any other solutions ?

Hi Mike, Did you end up working your problem out? We have the same issue, prints fine from Windows 7x64 desktops via TCP, but it's a no-go on Server 2008R2. Cheers - John.

Installation Error with DB2 on windows Server 2003 R2

Hi Experts,
We are installing ERP 6.0 on DB2 (DBUDB 9.7) Fresh Installation.
While Installing ERP 6.0 (ECC6.0 SR3) we are facing an error attached. Can you please suggest us to move Forward.
Details :
OS : Windows Server 2003 R2
DB2 : DBUDB 9.7
Thanks in Advance...
Regards,
Krishna.M

Hi Krishna,
Please check SAP PAM whether db2 9.7 is supported on Windows 2003 R2.
www.service.sap.com/PAM.
If not, then choose the database version which is supported for Windows 2003 R2.
You may try with db2 9.1 or 9.5 .
Regards,
Deepak Kori

How to setup ftp with dreamweaver and windows server 2003

Does anyone know if there is a tutorial/article on settinp up Dreamweaver cs3 to use Windows server 2003 as an FTP server...
any assistance would be greatly appreciated...

I was able to figure out how to setup the ftp connection, connect to my home server, however,whenever i tried to upload the contents of my website to my server, nothing gets uploaded to the site. I tried putting one page at a time, nothing. tried everything, and still no joy. I can see everything on my local server which is a XAMP package, but nothing on my remote server. Do i maybe need to maybe have a WAMP or XAMP on the Windows Server 2003 or that should not matter. This is new to me so i am learning as i go along.
Another thing, i was able to create a subfolder in my c:\www.ftproot folder, i can see that folder on my local machine, i'm just not seeing the files in that folder when i do my 'put' with my files.

Migrating MOSS from windows server 2003 x64 sp2 to 2008 R2

Dear All,
I can't find too much data supporting this issue
all articles says restore farm / migrate IIS / copy and replace 12 hives
I don't believe this is so practical
I need more in depth details like how IIS will be migrated [Should I use web deployment tools]
what about customized solution that modifies the web.config file and deployed as farm solutions will IIS migration tool override the changes on it
Thanks for help

I have my HP 855c/driver working on Win 7 Ultimate x64. I used the 'printui /s' procedure and 4 files described above with some minor changes.
I pulled WindowsServer2003.WindowsXP-KB914961-SP2-x64-ENU.exe down from the Microsoft website. Running the file causes the exe to unpack into a temp folder at the root drive. A 'Setup Error' message box is displayed once the file is run. I left this
message box up until I copied ntprint.inf, ntprint.cat, and sp2.cab from the temp folder.
I copied driver.cab from a Windows XP Pro disc. I also needed amd64\stdnames.gpd which was already in my Windows 7 c:\windows\system32\spool\drivers\x64\3 folder.
I created a folder with the 5 files (ntprint.inf, ntprint.cat, sp2.cab, driver.cab, and amd64\stdnames.gpd). This is my 'Have Disc' folder.
I followed the 'printui /s' instructions, first changing the permissions mentioned above and then installing the driver. Next I followed the instructions to add a printer from Control Panel 'Devices and Printers' - 'Add Printer', choosing to 'use an existing
driver' when installing the HP 855c.
I used a slightly different ntprint.inf, size 1570418. The readable contents of ntprint.inf is as follows. Notice the line 'CatalogFile=ntprint.cat' is not included. I tried using the 1570468 version of ntprint.inf; when I did I received an incompatibility
message (probably the same one mentioned above).
; NTPRINT.INF (for Windows Server 2003 family)
; List of supported printers, manufacturers
[Version]
Signature="$Windows NT$"
Provider=%MS%
; LayoutFile=layout.inf
ClassGUID={4D36E979-E325-11CE-BFC1-08002BE10318}
Class=Printer
DriverVer=10/01/2002,5.2.3790.4533
[ClassInstall32.NT]
AddReg=printer_class_addreg
[printer_class_addreg]
HKR,,,,%PrinterClassName%
HKR,,Icon,,"-4"
HKR,,Installer32,,"ntprint.dll,ClassInstall32"
HKR,,NoDisplayClass,,1
HKR,,EnumPropPages32,,"printui.dll,PrinterPropPageProvider"
Good luck

Creating a database with Sun Java Application Server 9

I am using a slightly outdated reference book on J2EE programming. It gives 2 methods of creating a database used in its casestudies. The first is an ANT script that gives the following output:
D:\original\CaseStudy-2-5\CaseStudy\Day02\exercise>asant database
Buildfile: build.xml
env-user:
prop-user:
set-user:
env-password:
prop-password:
read-password:
set-password:
set-j2ee:
create-jdbc:
set-j2ee:
asadmin:
[echo] asadmin.bat create-jdbc-resource user admin password password --
connectionpoolid PointBasePool --enabled=true jdbc/Agency
[exec] Usage: create-jdbc-resource [--terse=false] [--echo=false] [--intera
ctive=true] [--host localhost] [--port 4848|4849] [--secure | -s] [--user admin_
user] [--passwordfile file_name] --connectionpoolid id [--enabled=true] [--descr
iption text] [--target target(Default server)] jndi_name
[exec] CLI193 Password option "password" is not allowed on the command line
. Please use --passwordfile option or asadmin login command.
set-j2ee:
asadmin:
[echo] asadmin.bat list-jdbc-resources user admin password password
[exec] Usage: list-jdbc-resources [--terse=false] [--echo=false] [--interac
tive=true] [--host localhost] [--port 4848|4849] [--secure | -s] [--user admin_u
ser] [--passwordfile file_name] [target (Default server)]
[exec] CLI193 Password option "password" is not allowed on the command line
. Please use --passwordfile option or asadmin login command.
set-dbpath:
BUILD FAILED
D:\original\CaseStudy-2-5\CaseStudy\common\targets.xml:87: D:\Sun\SDK\pointbase\
lib not found.
Total time: 2 seconds
D:\original\CaseStudy-2-5\CaseStudy\Day02\exercise>
I've checked and there is no Sun\SDK\pointbase folder. The book was written for SDK 1.4 and I believe another application server. There is also a Java program that attempts to create it with jdbc. Its output looks like this :
D:\original\CaseStudy-2-5\CaseStudy\Day02\exercise\classes>java CreateAgency
java.lang.ClassNotFoundException: com.pointbase.jdbc.jdbcUniversalDriver
java.lang.ClassNotFoundException: com.pointbase.jdbc.jdbcUniversalDriver
at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:276)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:169)
at CreateAgency.main(Unknown Source)
D:\original\CaseStudy-2-5\CaseStudy\Day02\exercise\classes>
I am not conversant enough to discuss the corrections for the ANT script but I'm reasonably certain the Java program could work if I had the right strings in these lines.
// PointBase
private static final String driver = "com.pointbase.jdbc.jdbcUniversalDriver";
private static final String protocol = "jdbc:pointbase:server://localhost/sun-appserv-samples,new";
private static final String user = "pbPublic";
private static final String password = "pbPublic";
Can anyone help me with the correct driver and protocol?
I am using the latest download version SDK JavaEE5
the entire java program looks like this:
import java.sql.*;
public class CreateAgency {
// Cloudscape
//private static final String driver = "COM.cloudscape.core.RmiJdbcDriver";
//private static final String protocol = "jdbc:cloudscape:rmi:Agency;create=true";
//private static final String user = "";
//private static final String password = "";
// PointBase
private static final String driver = "com.pointbase.jdbc.jdbcUniversalDriver";
private static final String protocol = "jdbc:pointbase:server://localhost/sun-appserv-samples,new";
private static final String user = "pbPublic";
private static final String password = "pbPublic";
public static void main(String[] args) {
Connection conn=null;
Statement s=null;
try {
Class.forName(driver);
System.out.println("Loaded driver: "+driver);
conn = DriverManager.getConnection(protocol,user,password);
System.out.println("Connected to: "+protocol);
conn.setAutoCommit(false);
s = conn.createStatement();
System.out.println("Dropping exisiting BMP tables...");
try {s.execute("drop table ApplicantSkill");} catch (SQLException ex){}
try {s.execute("drop table Applicant");} catch (SQLException ex){}
try {s.execute("drop table JobSkill");} catch (SQLException ex){}
try {s.execute("drop table Job");} catch (SQLException ex){}
try {s.execute("drop table Matched");} catch (SQLException ex){}
try {s.execute("drop table Customer");} catch (SQLException ex){}
try {s.execute("drop table Location");} catch (SQLException ex){}
try {s.execute("drop table Skill");} catch (SQLException ex){}
System.out.println("Dropped tables");
System.out.println("Creating new tables...");
s.execute("create table Skill(name varchar(16) CONSTRAINT pk_skill PRIMARY KEY (name), description varchar(64))");
s.execute("create table Location(name varchar(16)CONSTRAINT pk_location PRIMARY KEY (name), description varchar(64))");
s.execute("create table Applicant(login varchar(16) CONSTRAINT pk_applicant PRIMARY KEY (login), name varchar(64), email varchar(64), summary varchar(512), location varchar(16), CONSTRAINT fk_location FOREIGN KEY (location) REFERENCES Location(name))");
s.execute("create table ApplicantSkill(applicant varchar(16), skill varchar(16), CONSTRAINT fk_applicant FOREIGN KEY (applicant) REFERENCES Applicant(login), CONSTRAINT fk_skill FOREIGN KEY (skill) REFERENCES Skill(name))");
s.execute("create table Customer(login varchar(16) CONSTRAINT pk_customer PRIMARY KEY (login), name varchar(64), email varchar(64), address1 varchar(64), address2 varchar(64))");
s.execute("create table Job(ref varchar(16), customer varchar(16), description varchar(512), location varchar(16), CONSTRAINT pk_job PRIMARY KEY (ref,customer), CONSTRAINT fk_customer FOREIGN KEY (customer) REFERENCES Customer(login), CONSTRAINT fk_location FOREIGN KEY (location) REFERENCES Location(name))");
s.execute("create table JobSkill(job varchar(16), customer varchar(16), skill varchar(16), CONSTRAINT fk_job FOREIGN KEY (job,customer) REFERENCES Job(ref,customer), CONSTRAINT fk_skill FOREIGN KEY (skill) REFERENCES Skill(name))");
s.execute("create table Matched(applicant varchar(16), job varchar(16), customer varchar(16), exact boolean, CONSTRAINT fk_job FOREIGN KEY (job,customer) REFERENCES Job(ref,customer), CONSTRAINT fk_applicant FOREIGN KEY (applicant) REFERENCES Applicant(login))");
System.out.println("Created tables");
System.out.println("Inserting table records...");
s.execute("insert into Location values ('London','London UK')");
s.execute("insert into Location values ('Washington','Washington DC, USA')");
s.execute("insert into Location values ('Verona','Verona, Renaissance Italy')");
s.execute("insert into Location values ('Wessex','Wessex, Kingdom of England')");
s.execute("insert into Skill values ('Tree Surgeon','Tree Surgeon')");
s.execute("insert into Skill values ('Cigar Maker','Cigar Maker')");
s.execute("insert into Skill values ('Bodyguard','Bodyguard')");
s.execute("insert into Skill values ('Cook','Cook')");
s.execute("insert into Skill values ('Lawyer','Lawyer')");
s.execute("insert into Skill values ('Critic','Critic')");
s.execute("insert into Applicant values ('juliet','Juliet Capulet', 'juliet@localhost' , 'Dutiful daughter', 'London' )");
s.execute("insert into Applicant values ('romeo','Romeo Montague', 'romeo@localhost' , 'Dutiful son', 'Wessex' )");
s.execute("insert into Applicant values ('julius','Julius Caesar', 'julias@localhost' , 'Roman Emperor', 'Washington' )");
s.execute("insert into Applicant values ('brutus','Marcus Brutus', 'marcus@localhost' , 'Roman Senator', 'Washington' )");
s.execute("insert into Applicant values ('proteus','Proteus', 'proteus@localhost' , 'Gentleman', 'Verona' )");
s.execute("insert into Applicant values ('valentine','Valentine', 'valentine@localhost' , 'Gentleman', 'Verona' )");
s.execute("insert into ApplicantSkill values ('juliet', 'Cook')");
s.execute("insert into ApplicantSkill values ('romeo', 'Cook')");
s.execute("insert into ApplicantSkill values ('romeo', 'Bodyguard')");
s.execute("insert into ApplicantSkill values ('julius', 'Tree Surgeon' )");
s.execute("insert into ApplicantSkill values ('julius', 'Tree Surgeon' )");
s.execute("insert into ApplicantSkill values ('brutus', 'Critic' )");
s.execute("insert into ApplicantSkill values ('brutus', 'Lawyer' )");
s.execute("insert into ApplicantSkill values ('proteus', 'Lawyer' )");
s.execute("insert into ApplicantSkill values ('proteus', 'Critic' )");
s.execute("insert into ApplicantSkill values ('valentine', 'Critic' )");
s.execute("insert into ApplicantSkill values ('valentine', 'Cigar Maker' )");
s.execute("insert into Customer values ('george','George Washington', 'george@localhost', 'White House', 'Washington')");
s.execute("insert into Customer values ('winston','Winston S Churchill', 'winston@localhost', '10 Downing Street', 'London')");
s.execute("insert into Customer values ('abraham','Abraham Lincoln', 'abe@localhost', 'Springfield', 'Illinois')");
s.execute("insert into Customer values ('alfred','Alfred the Great', 'alf@localhost', 'Wessex', 'England')");
s.execute("insert into Job values ('Tree pruner', 'george', 'Must be honest', 'Washington')");
s.execute("insert into Job values ('Cigar trimmer', 'winston', 'Must like to talk and smoke', 'London')");
s.execute("insert into Job values ('Theatre goer', 'abraham', 'Should be intelligent and articulate', 'Washington')");
s.execute("insert into Job values ('Cake maker', 'alfred', 'Should have a good sense of smell', 'Wessex')");
s.execute("insert into JobSkill values ('Tree pruner','george','Tree Surgeon')");
s.execute("insert into JobSkill values ('Cigar trimmer', 'winston', 'Cigar Maker')");
s.execute("insert into JobSkill values ('Cigar trimmer', 'winston', 'Critic')");
s.execute("insert into JobSkill values ('Theatre goer', 'abraham', 'Bodyguard')");
s.execute("insert into JobSkill values ('Theatre goer', 'abraham', 'Lawyer')");
s.execute("insert into JobSkill values ('Theatre goer', 'abraham', 'Critic')");
s.execute("insert into JobSkill values ('Cake maker', 'alfred', 'Cook')");
System.out.println("Inserted records");
conn.commit();
System.out.println("Committed transactions");
catch (SQLException ex) {
System.out.println("SQL Exception thrown: "+ex);
ex.printStackTrace();
try { conn.rollback(); } catch (Exception e) {}
catch (ClassNotFoundException ex) {
System.out.println(ex);
ex.printStackTrace();
finally {
try { s.close(); } catch (Exception ex) {}
try { conn.close(); } catch (Exception ex) {}
}

JavaEE Tutorial has a chapter on security:
http://java.sun.com/javaee/5/docs/tutorial/doc/
Usually a no-arg InitialContext() is used, rather than InitialContext(props). For more info, see
Glassfish EJB FAQ:
https://glassfish.dev.java.net/javaee5/ejb/EJB_FAQ.html
-cheng

Trying to install OEM 10g Grid Control agent on Windows Server 2008 x64

Received the following when trying to install OEM 10.2.0.2 for Windows 32 bit. I believe Windows 64 bit version does not exist. I have installed this on 2003 x64 in the past.
Error message:
Checking operating system version: must be 4.0, 5.0, 5.1 or 5.2. Actual 6.0
Failed <<<<
Is there a workaround or a version that will install on 2008 x64?
Thanks.

This will give you the complete picture of Grid Certification.
Oracle Enterprise Manager 10g Grid Control Certification Checker
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=412431.1
Is there a workaround or a version that will install on 2008 x64?Well, no OMS has been certified with this version as of now. You can have 10.2.0.3/4 OMS on 2008(32 Bit)
10.2.0.4 Agent is certified with 2008 64 bit.

Oracle10gR2 on Windows Server 2003 (x64) - Tape Media Managers

I am having difficulty tracking down a 3rd-party Media Manager for use with our Oracle10g (Release 2) Database on a Microsoft Windows 2003 Server (Standard x64 Edition). Have looked into ARCserve, but their Oracle Agent does not support x64.
Any thoughts or recommendations?

Another tool: NetVault
http://www.bakbone.com/products/backup_and_restore/
Backup Oracle 9 with CommVault Galaxy & RMAN
Aron

Windows Server 2003 x64 IIS Issue

To All,
I have recently installed IIS on my Windows 2003 x64 Server and I am encountering the "%1 is not a valid Win32 application." error message when I attempt to register my website.
These are the troubleshooting tasks that I had performed so far without any success:
1). Downloaded and installed both dotnetfix.exe & NetFx64.exe Redistribution files from the Microsoft site.
Please view the pasted screen-shot of my current IIS configurations in the Web Service Extensions below.
Bob.
Robert Brindle. MCSE, MCSA & MCP/Cisco CCNP & CCNA.

This one may help.
http://forums.asp.net/t/983377.aspx?+is+not+a+valid+Win32+application+Exception+from+HRESULT+0x800700C1+
or I'd ask them over here.
Microsoft IIS forums
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Create 10g Database with ASM on Windows Server 2003 x64

Similar Messages

Maybe you are looking for