Create a 3D view like used by Imax

Hello, I'd like to know how to convert a 2D video I've created into a 3D film which needs to be watched through the original Red/blue glasses. Is there any way of doing this or does it require 2 cameras side-by-side filming simultaneously? Which program needs to be used for this? Premiere Pro or After Effects?
Thanks
Arran

Settings??? Do you mean how do you rotoscope?
There's the rotobrush tool - Check the help files for the basics
There's the mask tools - Check the help files
If your internet access is limited go to a public library and use the internet there and do a Google search or use the links posted above. The process is too complicated to put in a post but the basics for creating a mask is as follows.
Press the G key to select the pen tool.
Click and drag to create a mask.
Press the M key twice mm
Click the stopwatch next to mask path
Press the V key to select the Direct selection tool
Move down the timeline
Select a vertex and move it which will create a keyframe
Repeat until your mask follows the action.

Similar Messages

Exception while creating the Search view by using ZBOL

Hi,
I created a ZBOL by using
http://blogs.moovar.com/sap/sap-crm-create-a-custom-bol-for-web-ic/
It is working fine.
I created ZBOL_K.
Now based on this I want create a Search and Search Result.
http://blogs.moovar.com/sap/sap-crm-web-ic-create-a-new-search-view-and-result-view/
In this when I create a Search View I getting the Exception like this.
I went step by step. But in the third page I write like this.
<%@page language="abap" %>
<%@extension name="htmlb" prefix="htmlb" %>
<%@extension name="xhtmlb" prefix="xhtmlb" %>
<%@extension name="crm_bsp_ic" prefix="crmic" %>
<%@extension name="thtmlb" prefix="thtmlb" %>
<%@extension name="chtmlb" prefix="chtmlb" %>
<%@extension name="bsp" prefix="bsp" %>
<%
DATA: LV_XML TYPE STRING.
lv_xml = controller->CONFIGURATION_DESCR->GET_CONFIG_DATA( ).
%>
<chtmlb:config xml = "<%= lv_xml %>"
               mode = "RUNTIME" />
<thtmlb:advancedSearch id                = "advsO"
                       fieldMetadata     = "<%= controller->get_dquery_definitions( ) %>"
                       header            = "<%= TESTSEARCH->get_param_struct_name( ) %>"
                       fieldNames        = "<%= controller->get_possible_fields( ) %>"
                       maxHits           = "//TESTSEARCH/max_hits"
                       values            = "//TESTSEARCH/PARAMETERS"
                       onEnter           = "SEARCH"
                       ajaxDeltaHandling = "false" />
Save and Activate the view.
But when I go to the config tab. It is showing the Error.
An exception occurred in inbound plug IP_DEFAULT of target view BSP_DLC_CONF/AdvSearchConfig
An exception has occurred Exception Class CX_SY_CREATE_OBJECT_ERROR - The object could not be created: The class does not exist.
Method: CL_BSP_MODEL=>CREATE_STANDALONE_MODEL
Source Text Row: 10
And aslo in available Search Criteria I did not get fields.
So, then how I can solve this problem.
Please tell me any solution.
Regards,
B.Krishna.

Hi,
I created a ZBOL by using
http://blogs.moovar.com/sap/sap-crm-create-a-custom-bol-for-web-ic/
It is working fine.
I created ZBOL_K.
Now based on this I want create a Search and Search Result.
http://blogs.moovar.com/sap/sap-crm-web-ic-create-a-new-search-view-and-result-view/
In this when I create a Search View I getting the Exception like this.
I went step by step. But in the third page I write like this.
<%@page language="abap" %>
<%@extension name="htmlb" prefix="htmlb" %>
<%@extension name="xhtmlb" prefix="xhtmlb" %>
<%@extension name="crm_bsp_ic" prefix="crmic" %>
<%@extension name="thtmlb" prefix="thtmlb" %>
<%@extension name="chtmlb" prefix="chtmlb" %>
<%@extension name="bsp" prefix="bsp" %>
<%
DATA: LV_XML TYPE STRING.
lv_xml = controller->CONFIGURATION_DESCR->GET_CONFIG_DATA( ).
%>
<chtmlb:config xml = "<%= lv_xml %>"
               mode = "RUNTIME" />
<thtmlb:advancedSearch id                = "advsO"
                       fieldMetadata     = "<%= controller->get_dquery_definitions( ) %>"
                       header            = "<%= TESTSEARCH->get_param_struct_name( ) %>"
                       fieldNames        = "<%= controller->get_possible_fields( ) %>"
                       maxHits           = "//TESTSEARCH/max_hits"
                       values            = "//TESTSEARCH/PARAMETERS"
                       onEnter           = "SEARCH"
                       ajaxDeltaHandling = "false" />
Save and Activate the view.
But when I go to the config tab. It is showing the Error.
An exception occurred in inbound plug IP_DEFAULT of target view BSP_DLC_CONF/AdvSearchConfig
An exception has occurred Exception Class CX_SY_CREATE_OBJECT_ERROR - The object could not be created: The class does not exist.
Method: CL_BSP_MODEL=>CREATE_STANDALONE_MODEL
Source Text Row: 10
And aslo in available Search Criteria I did not get fields.
So, then how I can solve this problem.
Please tell me any solution.
Regards,
B.Krishna.

How create animated power view reports using sharepoint list as a data source in sharepoint 2010?

Hi All,
I got a client requirement to create reports using SharePoint List as data source. The report should show reflection depends on values changed (I mean animation).
I have heard about the power view/power pivot which does this kind of animations in reports.
Can someone please guide me on creating reports which shows animations
In power view/power pivot using SharePoint List as data source in SharePoint 2010.
Thanks in advance.
MercuryMan

Hi MercuryMan,
Yes, Power View, a feature of SQL Server 2012 Reporting Services Add-in for Microsoft SharePoint Server 2010 or SharePoint 2013 Enterprise Edition, is an interactive data exploration, visualization, and presentation experience.
It provides multiple views featuring tiles, slicers, a chart filter, and a number of visualizations, including cards, small multiples, and a bubble chart. So, we can use Power View to do intuitive ad-hoc reporting for business users such as data analysts, business
decision makers, and information workers.
Currently, Power View report only supports two types of data models: PowerPivot Worksheet, and data models based on Analysis Services Tabular Model or Multidimensional Cube.
In your scenario, you can create PowerPivot worksheets using SharePoint List as data source, deploy the PowerPivot worksheet to a SharePoint Library or PowerPivot Gallery, and then generate Power View reports based on the PowerPivot worksheets on the SharePoint
site.
To use SharePoint List as data source in Excel PowerPivot, you can refer to the following resource:
http://blogs.technet.com/b/excel_services__powerpivot_for_sharepoint_support_blog/archive/2013/07/11/excel-services-using-a-sharepoint-list-as-a-data-source.aspx
http://technet.microsoft.com/en-us/library/hh230322.aspx
To create a Power View report based on PowerPivot model, you can refer to the following links:
http://technet.microsoft.com/en-us/library/hh231522.aspx
http://technet.microsoft.com/en-us/library/hh759325.aspx
Regards,
Mike Yin
If you have any feedback on our support, please click
here
Mike Yin
TechNet Community Support

To Create a Classification View by using Bapi

Dear All,
I want to create Classification view in Material Master using Bapi. I am using the bapi called BAPI_OBJCL_CREATE.
In that I am getting the valid output. But the problem is, the view is not created in the material master for the particular material.
Is it any authorization object is required to create the classification view in material master using this bapi.Please help me on that.
Let me know any other bapi is creating Classification view for the given material.

After the calling of BAPI BAPI_OBJCL_CREATE, read the RETURN table field TYPE = 'S'
Then call the BAPI_TRANSACTION_COMMIT.
This BAPI will update the records in Tables
Syntax
READ TABLE it_return INTO wa_return WITH KEY type = 'S'.
IF sy-subrc = 0.
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
    LOOP AT it_return INTO wa_return WHERE type <> 'S'.
      WRITE :/ wa_return-message_id,wa_return-type,wa_return-message.
    ENDLOOP.
ENDIF.
Regards
Bala Krishna
Edited by: Bala Krishna on Oct 4, 2008 11:56 AM
Edited by: Bala Krishna on Oct 4, 2008 11:57 AM

How to create a single view like report ?

Hello,
basic task is to present a user with 2 versions of the record from the DB. User then will decide either to "approve" the newer version or disregard the changes.
I'm thinking of presenting these rows in a 2 single view report forms.
how do i create this type of report ?
Thank you
Andrew

Andrew:
You can create the report query as
select apex_item.radigroup(1,record_id) Approve , rpt_column1,rpt_column2....
from table tab where record_id=<record id of old record>
UNION
select apex_item.radigroup(1,record_id) Approve , rpt_column1,rpt_column2....
from table tab where record_id=<record id of new record>You then add a 'Submit' button and a post-submit process to update the database based on the user's selection. The user's selection will be available in the 'f01' array.
Varad

ERROR - 16016 - FOR FORM CREATED ON A VIEW AND USING INSTEAD OF TRIGGER

I have created a form based on a view. The view has instead of Trigger on it.
When I try to update the form I get the following error:
Error: An unexpected error occurred: ORA-22816: unsupported feature with RETURNING clause (WWV-16016)
Can anyone tell what the problem is?
Thanks
null

THANKS A LOT IT WORKED.
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Rene' Castle ([email protected]):
This is a bug with views. If you can edit the PL/SQL code that is generated, you can remove the RETURNING clause and it will work.
NOTE: This will have to be done every time you edit the form.
<HR></BLOCKQUOTE>
null

Create a tab view item in obj-c for use in applescript studio

I'm making an application with applescript studio. I want to be able to add tab view items to a tab view at the press of a button. The problem I have is applescript studio doesn't allow me to create a new tab view item. So I'm thinking I can create the tab view item using objective-c, pass that to my applescript, then add it to my tab view.
In applescript I plan to use the following call methods to first create the tab view item object, and then add it to my tab view. The objective-c code which is called from the first line in the applescript code is below that. When I run my code I'm getting an error saying newTVI is not defined... so maybe you can see my error! Be kind to me because I'm new to objective-c and I'm sure that's where my problem lies. Anyway, I'd appreciate any help.
==Applescript calls to create and add a new tab view item
set newTVI to call method "returnNewTabViewItem" of class "makeNewTabViewItem"
call method "addTabViewItem:" of objMainTV with parameter newTVI
==Objective-c code to create the tab view item
==makeNewTabViewItem.h==
#import <Cocoa/Cocoa.h>
@interface makeNewTabViewItem : NSTabViewItem
NSTabViewItem *newTVI;
-(NSTabViewItem *)returnNewTabViewItem;
@end
== makeNewTabViewItem.m==
#import "makeNewTabViewItem.h"
@implementation makeNewTabViewItem
-(NSTabViewItem *)returnNewTabViewItem
newTVI = [[[NSTabViewItem alloc] initWithIdentifier:nil] autorelease];
return newTVI;
@end

Please, any ideas?

I can not create a Application View Control

Hi there
I'm using wli 8.1 y workshop 8.1.4
I already created my app view using application integration design console,I tested i everything worked fine.
According to the tutorial steps I published my app view and I got a *-ejb.jar .
But my problem is when I try to create an Application View Control using Workshop: Add Control > Integration Controls > ApplicationView
Then I enter the control's name (step 1), Select radio button Create a New ApplicationView control to use, I enter the name but in the step 3, I click in Browse button but I do not see any applciatioin view.
It suppose my published appview should appear on thet list in order i can create my appview control...
any idea?
thx

I have tried to create an account via ePrintCenter and it seems that the published application has several flaws in interpreting the provided input.
1) In the Filed for last Name I enter my last name, which consist of only Alph Characters. The form however thinks that there is some sort of special character and rejects my Input.
2) E-Mail address. is not identical; OK, so I do a quick OCR on the E-Mail and guess what they are identical. Again the form Fails to recognize this.
3) Enter a password (2 Fields) and a third is displayed which is marked as "*required" but is not labeled as to what the required info could possibly be. Or is it a 3 password confirmation box, who knows.
All I know is that a simple registration is a major pain with this HP site.
Any Help as to how to alleviate this would of course be greatly appreciated.

How to create individual view (like MRP,Accounting..)for existing material

Hi,
I have a scenario as below:
Suppose I created a Material using MM01 txn only entering data in 2 views i.e Basic data1 and Basic data2.
Now my workflow triggers. I have done this using 'Create' event of BUS1001006 Object type.
Now i need to send workitems to all those who are responsible to create rest views like MRP,Accounting,Work scheduling etc..Workitem will take them to MM01 txn with Material No. and user will select the view which he has authorization and will enter the relevent data and save.For this i have used 'CreateView' method of BOR BUS1001006 but its not working properly.
I hope you could understand the scenario.If need more clarity then please revert.
Can anybody tell the solution please.It will be very helpful to me.
Regards,
Madhu

I am passing the object also..but its not helping.
I think Parameter 'ViewListLine' of method 'CreateView' is not passing properly.
Can you please give any solution where to get this parameter value.
Regards,
Madhu
Edited by: Madhusmita Acharya on Mar 10, 2010 10:06 AM

Creating the materialized view using the database link

Hi Guys,
I am using the Oracle 11g release version.
Following is my question,
I had created the Database link to get the data from remote DB table.
Using that DB link, i can access the required table using SELECT statment.
When i tried to create the materialized using that DB link.
I am getting the error SQL Error: ORA-00942: table or view does not exist.
Can anyone please find the root cause and provide the solution for this?
TIA,
Dhivakar.

Hi Dhivakar,
try like this
CREATE DATABASE LINK test
CONNECT TO scott IDENTIFIED BY tiger
USING 'orcl';
Pls make sure the table name.which ur using to create the materialized view.Thanks
Venkadesh

Using interface builder to create a table view and add a cell

So I am using interface builder to make a table view. Should be easy. I drag a table view controller to my view, then it seems I should be able to drag a table view cell to the table view but it won't let me drop it down. If I do it in the documents window it just replaces the table view with a cell. Seems like this shouldn't be hard, but it's one of those things that should take 2 seconds but I have been messing with it for hours. It seems like most of the examples I have looked at in the same code don't use iB so I haven't found a good reference. If somebody can point me in the write direction let me know.

I struggled a bit too. Here's what I did on my recently completed app. I used IB to create the basic view and add the table. That's it. Then ensure your UIViewController based class implements the UITableViewDelegate and UITableViewDataSource protocols. Your cells will come from those methods, not anything you do in IB.
If you're creating a set of screens that just have tables that allow you to navigate up and down through the data then IB isn't worth using at all.
Just have your views extends UITableViewController and follow some of the supplied table based example apps.
I rewrote my first app 3 times as I slowly figured all of this out.
Hope that helps.

Problem occured when create a tree table for master-detail view objects using SQL queries?

I am programming a tree table for master-detail view objects using SQL queries and these 2 view objects are not simple singel tables queries, and 2 complex SQL are prepared for master and view objects. see below:
1. Master View object (key attribute is SourceBlock and some varaible bindings are used for this view object.)
SELECT cntr_list.SOURCE_BLOCK,
        sum(
         case when cntr_list.cntr_size_q = '20'
              then cntr_list.cntr_qty
              else 0 end ) as cntr20 ,
        sum(
         case when cntr_list.cntr_size_q = '40'
              then cntr_list.cntr_qty
              else 0 end ) as cntr40 ,
         sum(
         case when cntr_list.cntr_size_q = '45'
              then cntr_list.cntr_qty
              else 0 end ) as cntr45
FROM (
    SELECT yb1.BLOCK_M as SOURCE_BLOCK,
           scn.CNTR_SIZE_Q,
           count(scn.CNTR_SIZE_Q) AS cntr_qty
    FROM SHIFT_CMR scm, SHIFT_CNTR scn, YARD_BLOCK yb1, YARD_BLOCK yb2
    WHERE
    scm.cmr_n = scn.cmr_n
    AND (scm.plan_start_dt BETWEEN to_date(:DateFrom,'YYYY/MM/DD HH24:MI:SS') AND to_date(:DateTo,'YYYY/MM/DD HH24:MI:SS')
    OR scm.plan_end_dt BETWEEN to_date(:DateFrom,'YYYY/MM/DD HH24:MI:SS') AND to_date(:DateTo,'YYYY/MM/DD HH24:MI:SS'))
    AND scm.shift_mode_c = :ShiftModeCode
    AND scm.end_terminal_c = :TerminalCode
    AND scm.start_terminal_c = yb1.terminal_c
    AND scm.start_block_n = yb1.block_n
    AND substr(scn.start_location_c,(instr(scn.start_location_c,',',1,5)+1),instr(scn.start_location_c,',',1,6)-(instr(scn.start_location_c,',',1,5)+1)) BETWEEN yb1.slot_from_n AND yb1.slot_to_n
    AND scm.end_terminal_c = yb2.terminal_c
    AND scm.end_block_n = yb2.block_n
    AND substr(scn.end_location_c,(instr(scn.end_location_c,',',1,5)+1),instr(scn.end_location_c,',',1,6)-(instr(scn.end_location_c,',',1,5)+1)) BETWEEN yb2.slot_from_n AND yb2.slot_to_n
    AND scn.status_c not in (1, 11)
    AND scn.shift_type_c = 'V'
    AND scn.source_c = 'S'
    GROUP BY yb1.BLOCK_M, scn.CNTR_SIZE_Q
) cntr_list
GROUP BY cntr_list.SOURCE_BLOCK
2. Detail View object (key attributes are SourceBlock and EndBlock and same varaible bindings are used for this view object.)
SELECT cntr_list.SOURCE_BLOCK, cntr_list.END_BLOCK,
        sum(
         case when cntr_list.cntr_size_q = '20'
              then cntr_list.cntr_qty
              else 0 end ) as cntr20 ,
        sum(
         case when cntr_list.cntr_size_q = '40'
              then cntr_list.cntr_qty
              else 0 end ) as cntr40 ,
         sum(
         case when cntr_list.cntr_size_q = '45'
              then cntr_list.cntr_qty
              else 0 end ) as cntr45
FROM (
    SELECT yb1.BLOCK_M as SOURCE_BLOCK,
           yb2.BLOCK_M as END_BLOCK,
           scn.CNTR_SIZE_Q,
           count(scn.CNTR_SIZE_Q) AS cntr_qty
    FROM SHIFT_CMR scm, SHIFT_CNTR scn, YARD_BLOCK yb1, YARD_BLOCK yb2
    WHERE
    scm.cmr_n = scn.cmr_n
    AND (scm.plan_start_dt BETWEEN to_date(:DateFrom,'YYYY/MM/DD HH24:MI:SS') AND to_date(:DateTo,'YYYY/MM/DD HH24:MI:SS')
    OR scm.plan_end_dt BETWEEN to_date(:DateFrom,'YYYY/MM/DD HH24:MI:SS') AND to_date(:DateTo,'YYYY/MM/DD HH24:MI:SS'))
    AND scm.shift_mode_c = :ShiftModeCode
    AND scm.end_terminal_c = :TerminalCode
    AND scm.start_terminal_c = yb1.terminal_c
    AND scm.start_block_n = yb1.block_n
    AND substr(scn.start_location_c,(instr(scn.start_location_c,',',1,5)+1),instr(scn.start_location_c,',',1,6)-(instr(scn.start_location_c,',',1,5)+1)) BETWEEN yb1.slot_from_n AND yb1.slot_to_n
    AND scm.end_terminal_c = yb2.terminal_c
    AND scm.end_block_n = yb2.block_n
    AND substr(scn.end_location_c,(instr(scn.end_location_c,',',1,5)+1),instr(scn.end_location_c,',',1,6)-(instr(scn.end_location_c,',',1,5)+1)) BETWEEN yb2.slot_from_n AND yb2.slot_to_n
    AND scn.status_c not in (1, 11)
    AND scn.shift_type_c = 'V'
    AND scn.source_c = 'S'
    GROUP BY yb1.BLOCK_M, yb2.BLOCK_M, scn.CNTR_SIZE_Q
) cntr_list
GROUP BY cntr_list.SOURCE_BLOCK, cntr_list.END_BLOCK
3. I create a view link to create master-detail relationship for these 2 view objects.
masterview.SourceBlock (1)->detailview.SourceBlock (*).
4. I create a tree table using these 2 view objects with master-detail relationship.
When I set default value for variable bindings of these 2 view objects and the matching records exist, tree table can work well. I can expand the master row to display detail row in UI.
But I need to pass in dymamic parameter value for variable bindings of these 2 view objects, tree table cannnot work again. when I expand the master row and no detail row are displayed in UI.
I am sure that I pass in correct parameter value for master/detail view objects and matching records exist.
Managed Bean:
        DCIteratorBinding dc = (DCIteratorBinding)evaluteEL("#{bindings.MasterView1Iterator}");
        ViewObject vo = dc.getViewObject();
        System.out.println("Before MasterView1Iterator vo.getEstimatedRowCount()="+ vo.getEstimatedRowCount());
        System.out.println("Before MasterView1Iterator ShiftModeCode="+ vo.ensureVariableManager().getVariableValue("ShiftModeCode"));
        vo.ensureVariableManager().setVariableValue("DateFrom", dateFrom);
        vo.ensureVariableManager().setVariableValue("DateTo", dateTo);
        vo.ensureVariableManager().setVariableValue("ShiftModeCode", shiftModeC);
        vo.ensureVariableManager().setVariableValue("TerminalCode", terminalCode);
        vo.executeQuery();
        System.out.println("MasterView1Iterator vo.getEstimatedRowCount()="+ vo.getEstimatedRowCount());
        DCIteratorBinding dc1 = (DCIteratorBinding)evaluteEL("#{bindings.DetailView1Iterator}");
        ViewObject vo1 = dc1.getViewObject();
        System.out.println("Before DetailView1Iterator vo1.getEstimatedRowCount()="+ vo1.getEstimatedRowCount());
        System.out.println("Before DetailView1Iterator ShiftModeCode="+ vo1.ensureVariableManager().getVariableValue("ShiftModeCode"));
        vo1.ensureVariableManager().setVariableValue("DateFrom", dateFrom);
        vo1.ensureVariableManager().setVariableValue("DateTo", dateTo);
        vo1.ensureVariableManager().setVariableValue("ShiftModeCode", shiftModeC);
        vo1.ensureVariableManager().setVariableValue("TerminalCode", terminalCode);
        vo1.executeQuery();
        System.out.println("after DetailView1Iterator vo1.getEstimatedRowCount()="+ vo1.getEstimatedRowCount());
5. What's wrong in my implementation? I don't have no problem to implement such a tree table if using simple master-detail tables view object, but now I have to use such 2 view objects using complex SQL for my requirement and variable bindings are necessary for detail view object although I also think a bit strange by myself.

Hi Frank,
Thank you and it can work.
public void setLowHighSalaryRangeForDetailEmployeesAccessorViewObject(Number lowSalary,
                                                                          Number highSalary) {
        Row r = getCurrentRow();
        if (r != null) {
            RowSet rs = (RowSet)r.getAttribute("EmpView");
            if (rs != null) {
                ViewObject accessorVO = rs.getViewObject();
                accessorVO.setNamedWhereClauseParam("LowSalary", lowSalary);
                accessorVO.setNamedWhereClauseParam("HighSalary", highSalary);
            executeQuery();
but I have a quesiton in this way. in code snippet, it is first getting current row of current master VO to determine if update variables value of detail VO. in my case, current row is possibly null after executeQuery() of master VO and I have to change current row manually like below.
any idea?
            DCIteratorBinding dc = (DCIteratorBinding)ADFUtil.evaluateEL("#{bindings.SSForecastSourceBlockView1Iterator}");
            ViewObject vo = dc.getViewObject();
            vo.ensureVariableManager().setVariableValue("DateFrom", dateFrom);
            vo.ensureVariableManager().setVariableValue("DateTo", dateTo);
            vo.ensureVariableManager().setVariableValue("ShiftModeCode", shiftModeC);
            vo.ensureVariableManager().setVariableValue("TerminalCode", terminalCode);
            vo.executeQuery();
            vo.setCurrentRowAtRangeIndex(0);
            ((SSForecastSourceBlockViewImpl)vo).synchornizeAccessorVOVariableValues();

How to Create Power View Report using power pivot file in SharePoint 2013

H,
I have power pivot and Power View excel files. Now i want to create the Power View report in SharePoint 2013.
What steps should i use?
Can anyone help me on it.
I need detailed step by step procedure.
Thanks & Regards
Poomani Sankaran

Hi Aditya,
Thanks for your reply.
I am using Enterprise edition of SharePoint 2013 only. SQL Server 2012 SP1.
I have configured Reporing Services also successfully. I got "Reporting" folder in "15" hive location "C:\Program Files\Common Files\microsoft shared\Web Server Extensions\15\WebServices"
SSRS Service application also i have created success in CA Manage Service Application.
I have done "Reporting Services Add-in for SharePoint" also which is "rsSharePoint.msi".
What should i do apart from this? Can you tell me. Its frustrating like anything.
I have added the "PowerPivot" excel in "PowerPivot Gallery" and clicked the icon "Create Power View Report"
Thanks in Advance.
Poomani Sankaran

Insufficient priv error when creating a materialised view using DB link!!!!

Hi,
I have a two databases db1 and db2.
I have created a database link from db2 to access user1 schema in db1.
When i try to create a materialised view by accessing user1 table using user 'user2' in db2 database, i get error "ORA-1031: Insufficient Privilege".
The user2 has the priviliges "create view", "create any view", "create materialised view" etc.
I am able to select data, of the table using the database link, but creating materialised view gives this error.
I want to know if the user "user1" should be granting any privilige to user2, if so how is it possible as user2 dosent exist in db1!
i.e should i give command something like "grant select on user1.table to user2@db2"(this dosent work as it says user2@db2 dosent exist, obviously as its taking user2@db2 as a username in db1 schema)
or is this a problem with user2 priviliges in db2 database, if so what are all the priviliges that have to be given to user2 in db2 schema.
regards,

Hi,
User from db1 can not assign any privs to user on db2 database. If user from db1 want to access any object from db2 database, then on local level user2 on db2 should have all the acess to required object. Then you can use user2 on db2 using dblink from db1 user to access those objects residing on remote database.
If user1 from db1 can grant privs to user2 on db2 database on any objects on db2 database then it is highly security issue. This is not permitted.
Regards
e.g.
conn userx@db2
grant select on userx.table1 to user2;
conn user2@db2
select count(*) from userx.table1;
conn user1@db1
select count(*) from userx.table1@db2_dblink;
Edited by: skvaish1 on Apr 29, 2010 3:57 PM

Creating a Calendar View using alternative date fields

I have a Sharepoint 2007 calendar list that includes the standard Start and End Date fields. I also have "Suggested Start Date" and "Suggested End Date" fields that are utilized by users to recommend the Start and End Dates for
the event.
I can create a Calendar view that displays the events according to the Start and End dates.
I cannot create a Calendar view that displays the events according to the Suggested Start and Suggested End date fields.
In practice, all items are not displayed on this second calendar view that should be displayed even though you can choose these fields as Time Interval values when establishing the calendar.
Is there a way to create a Calendar View that will use date fields other than the default Start and End date fields?
Thanks,
Chris Mang>> JDA Software Group, Inc.

Hello,
It seems problem with time value. Have you included time value in custom datatime column wile creating? What happens when you select "date only" from column settings?
You can also try below suggestion to include "IncludeTimeValue" parameter in CAMl query by designer:
http://stackoverflow.com/questions/18362853/how-do-i-filter-by-today-and-time-in-sharepoint-list-view
OR else create two more calculated column and save date only in those columns then filter by them.
Hope it could help
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help

Create a 3D view like used by Imax

Similar Messages

Maybe you are looking for