Create a BOE Server Definition have an error
Hi,
today i install and configure the BO with BI 7.0 following ingo's doc,everything is right ,but when Create a BOE Server Definition i have an error !
when i click Verify BOE Definition ,there is an error "unable to call out destination,Verrify destination in sm59"! i test my RFC Connection ,it's all right.
thanks
Hi ingo,
thanks for your quick reply and sorry for my yesterday's disappear because of my bad network.
- is the BW publishing service started ?
yes, i have started the BW publishing service on the BOE Server Side from the CCM.
- did you configure the SAP Authentication on your BusinessObjects system ?
yes,i have Configured the SAP Authentication including "Enable SAP authentication","Configure Global Options for the SAP Authentication" and "Import SAP Users and Roles" the three steps on my BusinessObjects system. and the role that imported to BOE is created as the pdf -"BusinessObjects XI Integration for SAP Solutions Installation and Administration Guide" in BI 7.0 system. even i have give the role sap_all ,i think the Authentication is no problem and they work well.
- when you go to SM59 and run a connection test on your destination - does everything work ?
yes, i have tested the connection on my destination and it work well ,30 kb only need 7 second. the programid is the same with the BW Publish Service.
and before installing BusinessObjects XI Integration, there are something need to alert:
- SAP Frontend Installation? i have installed sapgui710 as the doc!
- SAP Java Connector? i have downloaded jco 2.1.8 for 32 bit because my BOE Server Side is 32 bit.
- SAP Transports?i ask for sap basis importing them to BI 7.0 system.
- SAP Single-Sign-On? the two tickets have configured on BI 7.0 system.
- BOE Server Side requirements? i have added the saplogon.ini file to the saplogon_ini_file environment variable.
as to eliminate the error ,i have configured something else:
- "Configuring the SAP HTTP Request Handler" have no error!
- "Configure the SAP Source Parameters" have no error!
at last, i have some puzzles:
- now i use the program id that configured by others.whether it need to be seted only for BOE connect BI 7.0?and how to set the program id?
- the pdf -"BusinessObjects XI Integration for SAP Solutions Installation and Administration Guide" tell me there are two ways to configure BW publisher ,Configuring the BW Publisher as a service now we are using and the other way is configure BW publisher with a local sap gateway.
is there one possibility :maybe my BW system now are seted not to support using the first way- "Configuring the BW Publisher as a service "but the second way.
thanks for a lot
Similar Messages
-
Problem in creating DataServer using SQL2008 connection status is ERROR
HI All
I am fairly new in SAP MII , and i have been trying to create new data server using MSSQL2008 which is on my laptop(local) and i access MII in web based form. the sap MII version is 12.1.5(Build99)
this what i did
1.I have deployed JDBC 3.0 driver on system management on SAP MII
2.When creating the Data server I have done the following check below (screen dump)
Connector IDBC
ConnectorID
ConnectorType SQL
DatePrefix '
DateSuffix '
DaysRetention 7
Description mii
Enabled T
InitCommand
InternalDateFormat yyyy-MM-dd HH:mm:ss
JDBCDriver com.microsoft.sqlserver.jdbc.SQLServerDriver
MaxRetryCount 5
Name tigo2
PoolMax 100
PoolSize 1
RetryInterval 60000
ServerPackage com.sap.xmii.Illuminator.connectors.IDBC
ServerURL jdbc:sqlserver://localhost:1433;databaseName=MII
Timeout 15
UseCount 256
UserName sa
ValidationQuery SELECT GETDATE()
WaitTime 30
3. I checked the connection of my server in Management studio which works fine
checked the port , which is fine and the firewall exception changed it to except SQL SERVER PORT 1433
but i still get the connection status error: tried locating the logviewer to see what the problem is cant retrieve anything
Kindly guide me in the right path for im runnin out of ideas. I installed the JDBC driver on the laptop and made CLASSPATH to point to that folder STILL no luck.
and with regards to viewing the LOGviewer I truely have no IDea how to do that , I have tried to check on the forum nothing helped.
Edited by: Tigomezge on Jun 21, 2011 3:19 PMTigo,
You can try this,
Install SQL Server Management Studio on MII server (where MII is installed, should already have one if you have installed NW on SQL DB, if not, install one) and then try to access DB installed on your laptop from there using the IP address (not local host).
If it works fine then atleast one thing can be confirmed that your DB is accessible outside of your laptop (means no TCP/IP or port or firewall issues).
Also, When you unzip the Driver exe file (i mean install), usually you will find 2 jar files,
1) sqljdbc.jar
2) sqljdbc4.jar
Use of these jar files purely depends on the Java installed on the system. refer to this link on more details:
[Choosing Right JAR File|http://msdn.microsoft.com/en-us/library/ms378422.aspx]
Let us know how it goes
Regards,
Adarsh
Edited by: Adarsh Sidnoor on Jun 22, 2011 7:37 PM -
Unable to create Inbound Sync Server Proxy - Authorization problem
Im using PI 7.0 . When I try to create a inbound sysnchronous server proxy in SPROXY tcode , I get the following error
Authorization Check failed: S_TCODE with parameters TCD SICF
Im able to create both outbound and inbound asynchornous proxies . What could be the problem?The JDK/Java that ODI using should be 64bit if ODI 11.1.1.6 is 64 bit. (I think JDK 1.6 is recommended for this ODI version)
Also, for which technology you are creating a data server ? and what error message you are getting while creating it ?
Thanks,
Santy. -
Get message "Error creating account: Incoming server already exists."
trying to set up new IMAP account and get message "Error creating account: Incoming server already exists." Changed settings manually, but same error message.
''ScottNH [[#question-1040338|said]]''
<blockquote>
trying to set up new IMAP account and get message "Error creating account: Incoming server already exists." Changed settings manually, but same error message.
</blockquote>
I have been getting this too (for the last two days - on at least a dozen tries).
I am Running Win7 and already have three POP accounts.
All definitely have the incoming server pop.googlemail.com
I wanted to add a new IMAP account, so in T'Bird
Tools.... Account Settings
Account Actions ..... Add Mail Account
Filled in
my name,
the email address ([email protected] - and in gmail this mail account
was created as IMAP),
password (with a tick to remember this)
... continue
and it then detected the mail setup as IMAP,
Incoming : IMAP, imap.googlemail.com , SSL
Outgoing : SMTP, smtp.googlemail.com , SSL
Username: [email protected]
but when I then clicked on Done
it said Error Creating Account - Incoming server already exists.
And if I then clicked on OK followed by Manual Config, it then showed
in the Mail Account Setup
Incoming: IMAP imap.googlemail.com 993 SSL/TLS Normal Password
and again if I then clicked Done it gave the same error message as before.
(and I have screenshots to support all of this).
But I do not know if someone has been working on a fix to T'Bird or googlemail, because just now when I did it yet again in order to make a final check that what I have been writing here is correct , this time I did NOT get the error message and the new account has been setup!!!!!
So do others find this has now been cleared too? -
An error occurred while creating a Page Server subprocess.
I am using XI R2 SP5 on solaris.
When we try to view any report on demand or schedule any report that has a parameter, the following error comes back:
An error occurred while creating a Page Server subprocess.
I have tried restarting the services. I have tried creating a new page server. It behaves the same way. In other online forms, I've seen with this error message, people have talked about fixing it by installing SP2 or by uninstalling and reinstalling everything. We're at SP5, so we should have anything that was fixed at SP2. An uninstall and then reinstall would be a nightmare given the amount of use on this system.
Can anyone recommend anything at all? I'm about to have our unix admins reboot the server, but that is really nothing more than a stab in the dark. I saw someone else in an online posting claim that a reboot fixed the problem, but I've only seen that once.checked this SAP Note?
1204013 - Error: "The Page Server is unable to create a child process" when viewing a Crystal report in InfoView on Solaris
Symptom
When trying to view a Crystal report in BusinessObjects XI Release 2 InfoView on Solaris, the following error message appears:
"The Page Server is unable to create a child process"
In the syslogs, you see the following error messages:
"An error occurred while creating a Page Server subprocess."
"The function PEOpenEngineEx failed. Reason: Report engine not opened."
"Internal error for dll procreport."
"Unable to load dll procreport."
"Internal Job Server error."
Cause
The following file in the MainWin registry has become corrupt:
bobje/enterprise115/solaris_sparc/crpe/mw/registry/core_data/servername/.mw/hklm_sunos.bin
This has become corrupt due to the web application server running under a different account than the BusinessObjects Enterprise applications.
Resolution
Restore the hklm_sunos.bin file using a backup of that file. The backup file must be from before the corruption occurred. Also ensure that your web application server and BusinessObjects Applications are running under the same user account. -
Error when creating a linked server to IBM iSeries AS/400
I am migrating databases from SQL Standard 2005 (32 bit) to SQL Standard
2012 (64 bit) and getting errors when I create the needed Linked Servers to our IBM as/400. I scripted the as400 linked server from the 2005 server and created it on the 2012 server:
EXEC master.dbo.sp_addlinkedserver @server = N'AS400', @srvproduct=N'DB2 UDB for iSeries', @provider=N'MSDASQL', @datasrc=N'AS400'
EXEC master.dbo.sp_addlinkedsrvlogin @rmtsrvname=N'AS400',@useself=N'False',@locallogin=NULL,@rmtuser=N'USER_NAME',@rmtpassword='PSSWD'
(plus various sp_serveroptions)
I then verified that the MSDASQL Provider "Allow Inprocess" was checked and the Linked Server is listed as using the provider but when I try to view the objects under the "AS400" Linked Server I get an error saying: Cannot initialize the
data source object of OLE DB provider "MSDASQL" for linked server "AS400". (Microsoft SQL Server, Error: 7303)
I was told to download and install OLEDB provider for DB2. I downloaded DB2OLEDBV4 but when I try to install it I try to install it I get a OK Box saying: "Microsoft OLE DB Provider for DB2 requires the Microsoft SQL Server 2008 or later
version. Ensure that this version is fullfilled before installing Microsoft OLE DB Provider for DB2." when I click OK, I get "Setup was interrupted before Microsoft OLE DB Provider for DB2 could be completely installed" and the install
exists. I am installing on SQL 2012!
Can anyone please advise...Hi,
Based on your description, we know that you got an error when you installed the OLEDB provider for DB2. Microsoft OLE DB Provider for DB2 V4.0 is needed If you use SQL Server 2008 R2 or SQL Server 2012 to connect to IBM DB2 databases.When you install the
OLEDB provider for DB2 V4.0, we need to make sure that the system meets the following requirements:
• Windows Server 2008 R2 SP1 or Windows 7 SP1 or Windows Server 2008 SP2.
• Microsoft SQL Server 2012 (Enterprise, Developer or Evaluation Edition) or Microsoft SQL Server 2008 R2 (Datacenter, Enterprise, Developer or Evaluation Edition) is installed.
• Microsoft .NET Framework 4.0.
As your post,it seems that you have installed SQL Server 2012 Standard Edition,this edition is not supported by Microsoft OLEDB Provider for DB2 V4.0. I recommend you to upgrade the standard edition to enterprise edition and reinstall the OLEDB Provider.You
can try this method and if you have any questions,please feel free to revert.
For more detailed information, you can review the following link.http://msdn.microsoft.com/en-us/library/hh873008(v=sql.110).aspx
Thanks
Lydia Zhang -
I get the following error while saving a task inside task list:
"The server was unable to save the form at this time. Please try again."
I tried restarting "search service host controller".
The server has 8 GB RAM and according to task manager, 6.67 GB is being used.
I logged into the site with user which is the owner of the site. I tried creating tasks from client as well as the SharePoint server itself. Same error is shown in both the cases.
How do I find information on the exact problem that is causing the error? What are possible solutions?Hi robikshrestha,
This error message often shows when there is low memory that can be used, the workaround restart the “SharePoint Search Hosting Controller” service is to release some memory, and make it work. Whether restart the service release memory
in your situation?
Would you please check whether this issue happens all the time in task list, or happens sometimes when the memory is lower to use. If it doesn’t have a large impact, you can restart the server, check the result. have a look at the event
log and ULS log, see whether there is related information.
If it happens all the time, would you please use other browsers, whether the results are same? This may be caused by some add-ons in IE, like Free Download Manager I have seen.
Thanks,
Qiao Wei
TechNet Community Support -
Hi Guys
I have an issue please help on that earliest.
When am trying to install Windows server 2008 OS. Error msg was coming 0x80070070:"not having enough space for installation"..Even though i have 20GB space?..Pls resolve this issue immediately.
Regards,
ShivIs this a clean install or an upgrade? 20 GB, though greater than the minimum, is pretty minimal. How much memory do you have on the system? 2008 would try to create a page file of 1.5x physical memory, so if you are building on a large
memory system, you could be having an issue there.
"Pls resolve this issue immediately"
Forums are not for support. They are monitored by people, like yourself, who are willing to take time out of their days to provide the benefit of their past experience. If you need support, you need to purchase a support contract from Microsoft
or some other party.
. : | : . : | : . tim -
File system error while creating a virtual server
Hi
I get the following error when I create a virtual server:
File System Error: Could not create directory /opt/SUNWwbsvr/https-web-content (permission denied)
The admin server is owned by root but the instance that I want to create should be owned by webservd - like the other instance that is installed.
this error shows that web server is unable to create a directory under SUNWwbsvr folder. Any hints pls?
thanks!sorry this error is while creating a new server instance - not a new virtual server.
File System Error: Could not create directory /opt/SUNWwbsvr/https-web-content (permission denied) -
I can't burn a cd of my own created music. I either get the error 4261, or after "Checking media" the process stops and nothing further happens. Have tried different burn speeds and cds. Have re-installed iTunes.Any suggestions please?
wm0203Sounds like the CD drive died. Luckily they cost next to nothing to replace. Or get an external LaCie instead. I have a dual G4 1.25 and the CD drive was always so anemic I use a LaCie Porsche with it.
-
I have Acrobat 9.5 and when I try to create>pdf from scanner, it displays an error "Adobe acrobat has stopped working". Is there any way I can use this functionality?
Provide you have Acrobat 9 installed in an OS for which Acrobat 9 is compatible then you can use the functionality.
As well, you need a scanner connected, powered up, and the software installed. Acrobat 9 "prefers" TWAIN drivers.
Always visit the scanner vendor's site and download - install the latest greatest software.
n.b., The Acrobat 9.x product family passed into "End of Support" mid-year 2013.
As well the Acrobat 9.x product family is not compatible with contemporary OSs.
Be well... -
I have installed HP2035n. But when i try to open the embedded web server, i get the error "Firefox doesn't know how to open this address, because the protocol (fe80) isn't associated with any program." What is the possible solution?
I typed in the IPv6 address of the printer in the address feild of firefox.Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
Do a malware check with some malware scanning programs.<br />
You need to scan with all programs because each program detects different malware.<br />
Make sure that you update each program to get the latest version of their databases before doing a scan.<br />
* http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
* http://www.superantispyware.com/ - SuperAntispyware
* http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
* http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
* http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
See also:
* "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked -
TS4006 I have an error on my ipad stating: "Server stopped responding"
I have an error on my IPad stating: "Server stopped responding'
However, I have full connection to wifi, I tried rebooting wifi, turning off wifi and turning back on -on I Pad, I tried turning on/off airplane mode, etc.
My email is working fine so I know I have internet connection to the IPad....
Does anyone have any advice?
ZennaTap Settings > General > Reset > Reset All Settings
No data is lost due to a reset.
Then restart the device. -
"Unable to connect to server" I have wifi connection but I'm getting this error when I try to purchase an app. Why? If anyone knows can you please help me thank you in advance. :-(
Can you load a webpage in Safari with that wifi connection? If so then it's a problem with the iTunes Store app connection. If not then your wifi isn't fully functional and you need to troubleshoot that first.
-
Revision: 8910
Author: [email protected]
Date: 2009-07-29 14:22:26 -0700 (Wed, 29 Jul 2009)
Log Message:
Bug: LCDS-936 - Should have better error message in servlet log if server in services-config.xml is configured to use wrong class.
QA: Yes
Doc: No
Checkintests: Pass
Ticket Links:
http://bugs.adobe.com/jira/browse/LCDS-936
Modified Paths:
blazeds/trunk/modules/core/src/flex/messaging/MessageBrokerServlet.javaAfter many hard working days.i finally found the error cause,i needed to make weblogic datasource also ADF doesnt work on internet explorer browser,it works on safary.hope it helps somebody
Maybe you are looking for
-
Issue with SAP Single Sign-On and Scheduling Reports
Hello -- We are on XI 3.1 with SAP BW and SSO. Some users are getting failures with this error message when they schedule a report to run: "A database error occured. The database error text is: Unable to connect to SAP BW server System received an e
-
How to setup CCMS with Solution Manager
Hi, All My question is how to setup or satallite connection with Solution manager 4.0 for CCMS alerts Is that RFC connection using both sites, trusted and satellite system ? I would like to setup CCMS alerts through Solution manager and R/3 ccms plea
-
Creating a Good Receipt PO via DI API No matching records found (ODBC -2028)
Hi, I trying to create a Good Receipt PO via DI API. It is working when the user I used to log in to SAP via the DI API is a Professional User but when I changed it to a Limited Logistics User, I'm receiving the No matching records found (ODBC -2028
-
Would like to Update customer relation ship (KNVP )
Customer data (sold to / ship to / customer group) is there in KNA1 table but relation ship is missing. I would like to import customer relation ship (like ZG/WE for PARVW) in KNVP table, please suggest the API . I tried CUSTOMER_UPDATE but got erro
-
is there an easy way to move contacts and calander from my office microsoft outlook to my personal imac?