Create a BPEM Case and link to a ISU Contact Record

Hi All -
I have a question, We would like to create a FOP to do the following
1. Create a BPEM case.
2. Create a ISU Contact for the BP using the method ISUCONTACT-CREATEFROMDATA
The question is can this method be used to attach the BPEM Case to the Contact Object? That is, will it establish a relationship in the BCONT_OBJ table?
I want to  look up the BPEM case from the Contact.
Regards,
Pradhip.S

You can definitely do that by adding the business object EMMACASE and object key to be your BPEM case number into the CONTACTOBJECTS/CONTACTOBJECTS_WITH_ROLE parameter of the method you are using.

Similar Messages

  • I created a ringtone successfully and assigned it to a contact, but the default ring always answers, I've tried deleting the contact, and also shutting the phone down completely, but neither has worked. One tip mentioned making sure format was correct??

    I assigned a ringtone to a contact but the default answers.  I've tried deleting the contact and reinstalling it and  shutting the phone down (holding the home button in and the top button until apple icon appears), One tip mentioned making sure the format was correct. ???  Any suggestions?  The ringtone itself works if used as a default, but when I assign it to this contact, no dice.

    First thing to always do is write a Certified Return Receipt letter or just copy the post you made and send it to Verizon Wireless and dispute it in writing.
    Then walk down to your local court and file a small claims court case against Verizon for all the fraudulent charges. Verizon will call you before that court case and then it may be possible to get this wiped off your account.
    Also file a BBB complaint http://www.bbb.org
    Again Verizon will contact you to offer to settle. Get the settlement in writing not verbal. Or proceed to court.
    Sorry you are going through hell for something you should never have had to go through.
    Good Luck

  • Come here for 5G Ipod CASES and links to them.

    Hi all,
    I thought i would do the same thing that ocured when the ipod photo came out adn start a post that lists where links are offered for all present and future planned 5G cases. I am sure that as people post links here the suply willb e very beneficial. So upon my own looking i have noticed this great link. THey are planniyg a case soon for the ipod video. An i personally like the case becasue it is so genius.
    http://www.iwoodnano.com/miniot/index.htm
    So come on everyone that currently owns or will own a 5G ipod lets set some good links down for everyone to share cases.=)
    AND something else fun what is your 5G ipods name? I know awkward but comeon you do call it sometihng right?
    GFF

    Hey All,
    Check this out the makers of the great silicone cases "Iskinz" has announced a special case for both 5g ipod models available early december!! Here is a link to a pic of it and to get info when it becomes available. I had a iskinz case for an older ipod that i had good case.
    http://www.iskin.com/store/I2BeNotified.tpl
    Hope this helps for those considering a good case for their ipod
    GFF

  • PC-UI : Creating new Filed Group and link it to the screen

    I have extended the Leads application in EEWB in CRM 4.0. I would like to bring the new fields in PCUI. How do I create a new field group containing the newly created fields, link it to the screen structure and generate the corresponding layout. Do I have to use CRMC_BLUPRINT transaction code at any point of time. An answer for a detailed approach would be rewarded with Maximum Points.
    Thanks!
    Suresh.

    as it is custom fields use the tx:CRMC_BLUPRINT_C.
    BTY when you add new fields via EEWB it will automatically generates fieldgroup and shows in the screen.
    If you want to create your own fieldgroup goto above tx and you will find field group under application element.
    Raj

  • Create SAP Script Style and link to Script

    Hi,
    How to create SAP Script Style through SE72...and how to implement it to Script..
    Means where to implement to Script..for ex. below code is script code of ZMEDRUCK...
    /: INCLUDE &T166P-TXNAM& OBJECT &T166P-TDOBJECT& ID &T166P-TDID& LANGUAGE &EKKO-SPRAS& PARAGRAPH IX
    Please tell me where i use that style...
    Regards.

    Hi.
    Maybe, I think that the purpose of style is to use it with SO10.
    Therefore, it doesn't use it in SAP script.
    SAP script copies with SE71 and changes.

  • I have just got an ipod touch for christmas have created an apple account and linked it to my bank card so i could buy the odd app i have since bought a 69p app and it has done an update my bank account balance has changed by £1.58 can anyone advise

    i would just like to know why when i bought a 69p app that it seems apple have taken 1.58 out of my bank account, the ipod has updated since i have had it but i was led to believe all the other free apps i downloaded were free, also that wifi was free so i cant see where the charge has come from, any advise would be very welcome, im a noob to apple merchandise.
    Thanks
    Elliot

    It sounds like a cred hold was placed on your account for the free apps.  See:
    iTunes Store: About credit-card authorization holds
    I would wait until you get the email receipt(s) for your purchases.  If yu were charge more than you think then:
    How to report an issue with Your iTunes Store purchase

  • Sync creates duplicate email addresses and copies pictures from other contacts

    first post...
    I recently updated my 8830.  When i sync'd for the first time, it had 1300 changes to my 1300 contacts.  Each one had a picture change, but not all to the same picture, some were pictures i have downloaded, some were generic pictures.  However, I now have the wrong picture for prolly 1290 contacts that didn't have a picture before.  The picture only shows up on my phone, not in my WindowsMail where it shows the default picture.
    additionally...
    some of the changes also duplicated the email address.  I have not looked to see how many.
    ugggghhhh
    Help, please...
    Thanks
    Pro Vagabond

    Hi and welcome to the BlackBerry Forums
    I never hear this, but try this.
    If you have all the correct data in outlook, my suggestion is wipe the device (all the data is erased) and synch the device again.
    To wipe the device go to menu,  options, security options, general options, press menu, and wipe handheld.
    If I help you with any inquire, thank you for click kudos in my post.
    If your issue has been solved, please mark the post was solved.

  • How to create citadel database and link it to an existing project library programatically?

    hi,
    does anyone knows how to create citadel database progarmatically and linking it with my project library programatically?
    samriddh sarbalhi
    [email protected]

    hi,
    i have designed an application having four security levels like administrators, engineers, operators & guests.
    now i want that whenever the guest logins in my application, windows components on the desktop will not be accessible to him means he can only view my application but he will not be able to view start menu on the task bar of the windows page or any icon on the desktop.
    please tell me how to accomplish it progarmatically using labview.
    the appropriate response will be highly appriciable.
    thanks
    samriddh sarbalhi
    [email protected]

  • BPEM Case category doubt

    Hi Experts,
    I have a doubt regarding BPEM case categories. In case cat there is a field in Basic data tab called  "CASE CREATION TYPE" having following two options:
    a) Automatically
    b) Manually
    I want to know the basic difference between these two. I have done some research on myself and found out this:
    a) Automatically: for this clarification case is created automatically when EMMA transaction founds msg defined in the case cat in the application log.
    b) Manually: for this we have to generate the case with help of BAPI by manually coding it.
    Please share your views about my finding whether its right or wrong?
    Thanks in advance.

    BPEM case creation depends on the message that is being configured against different case categories.
    Automatic case categories are configured generally for standard codes like ISU Billing Job or Invoicing Job. Here the application log is written with different messages during the ISU job and later EMMA transaction is executed which picks all these messages (with variables) and create unique cases.
    Manual Case creation is generally used in custom codes to raise a BPEM case as and when an exception is encountered like during sales order creation product code is missing or during account statement generation contact address in missing. In these custom developments application log in not written but the message is directly used to create a BPEM case by directly calling the BAPI.

  • Create BP and link to HR minimaster

    hi,
    There are employee entries in HR minimaster and now i want to create BP's for each of these employees and link them back to HR minimaster.  I want to use these resources in cProjects for staffing.  Pls let me know what is the best way to do this.
    Thanks in advance.
    sujata.

    Sujata;
    Please read this:
    Business partners are not integrated with the HR application components from the ERP system in the standard system. Therefore, HR master data is not distributed in Project Management. You create business partner master records with the BP role 'employee' in the standard system for your employees.
    When you have implemented the HR application components in the ERP system, we recommend that you integrate the business partners with the HR application components. In this case, you cannot create any business partner master records with the BP role 'employee' in Project Management.
    To integrate the business partners with the HR application components:
    1. Perform the activity.
      The HR: Set Up Central Person screen appears.
    2. Set the value X for the semantic abbreviation HRAC under the group name HRALX.
      This field is empty in the Project Management standard system.
    3. Choose Active Plan Version as the value for the semantic abbreviation PLOGI under the group name PLOGI.
    4. Save the data.
    5. Adjust the ALE distribution model of your HR system.
    Take a look in --> SAP Portfolio and Project Management --> Project Management --> Resource Management --> Business Partner --> "Set Up Integration of HR".
    Also check this link --> http://wiki.sdn.sap.com/wiki/display/PLM/IntegrationofcProjectsandHR
    Sap Note --> 550055
    If you do not use HR, BP could relate an Organizational Unit.
    Best regards.
    Mariano

  • Hello there,  I created a DPS application and I want that when you click on an image, it opens a pdf. But this one is on the ipad.  This is in case there is no internet connection.   Thank you.

    Hello there,
    I created a DPS application and I want that when you click on an image, it opens a pdf. But this one is on the ipad.
    This is in case there is no internet connection.
    Thank you.

    How to make the zip: http://helpx.adobe.com/digital-publishing-suite/help/import-htmlresources.html
    How to link to the asset: Digital Publishing Suite Help | Hyperlink and button overlays
    Neil

  • How to show Html5 created in eclipse and link to any cloud application like c4C through HCP

    Hi Experts,
    How to show Html5 created in eclipse and link to any cloud application like C4C through HCP 
    Regards,
    Vijay.

    Your question is very unclear, please elaborate what you are trying to achieve.
    Also, did you click on the Alert Moderator link? This is for reporting abusive content, spam, points cheating, etc. It should not be used w/o a reason (one of the above) as what it does is putting the content in the Moderators' queue and hiding it from public view.

  • I would like to be able to create a few icons with photos on them and linked to a persons phone number.

    Hi, my father is in the middle stages of dementia and having trouble using his new iphone. I would like to be able to create a few icons with photos on them and linked to a persons phone number. This way he can select an icon and it will auto-dial that number. I did some research and an app called SBphotoDial did exactly what I need but it no longer seems to be available in the App Store. Any thoughts?

    See Here for iPhoto...
    iPhoto: How to move the Library to an EHD
    Make sure that the EXT Drive is formatted as Mac OS Extended (journaled).
    1. Quit iPhoto
    2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
    3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
    4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.

  • Sales order for service should create project and link equipments.

    Hi,
    I'm trying to create a sales order for a service material through VA01. The problem is that this sales order should create a proyect, but at the same time i should be able to associate several equipments to the item position.
    The problem is that if I want to create a project, option " Sched.Line Allowed" should be marked for the item category, But if do it, when i create a sales order, if i want to associate 1 o more equipments to my item position, (Extras-->Technical Objects), i get this message "Serial number profile is missing for material..." instead of the table where i would introduce my equipments.
    Is there any solution to this problem or should i proceed in a different way?
    Thanks in advance.
    Luis.

    Hi Luis,
    We both are working on the same vertical, I am also working now in elevators and escalators.
    We have enabled similar (not same) scenario like this.
    When order is created (sales order) using serial number profile, serial no and equipment number are generated. I think even during service order, this can be enabled. The only thing you have to do is to create a profile and link that to material master. Please explore in SD and MM. This is easy to do. This will create equpment no for every item in the service order.
    We have also enabled the creation of whole project for the order and one WBS element  and network for each of the line items adn this happens automatically.  This is done as explained earlier. Creation of standard project, std WBS, std network adn then linking the material codes to these objects in CN08. To my knowledge, this is the only way.  If there is one standard project, which is linked to all related standard WBS, then during order creation, a WBS element is created after the creation of a standard project. When project is created, service order is linked to the project. So for other items, this project is taken and the WBS and network are created using this project.
    Now your assembly processing, production order, Purchase requisition are taken care of by the usage of components overview for activities in the network and object dependencies. For Production orders, you also have standard BOM, which can be linked to activities in the NW. You can control the materials of the standard BOM using selection condition dependencies. You can also initiate variant configuration in service order to maintain the nature of service and then use dependencies to trigger respective assembling, PR etc.
    If you want to do this for multiple eqpmts, you can also use functional location, which links multiple equipments to one place.
    The only thing you have to do is to configure this and see. Only then you will get ideas.
    Pls let me know if you need more information.

  • I want to create an array that goes into a case structure where each element in the array is an individual case and gets done in order

    I want to create an array that goes into a case structure where each element in the array is an individual case and gets done in order. Any ideas, I've been playing with the idea but have had no luck, is this even possible?

    Hi,
    Please check it out the attached Vi.. Is this you need?
    Sasi.
    Certified LabVIEW Associate Developer
    If you can DREAM it, You can DO it - Walt Disney
    Attachments:
    Event.vi ‏11 KB

Maybe you are looking for