Create a Brush Tip for AE CS3?

Hey All,
I'm trying to find a way to get a small square brush tip to use in AE CS3. So far I can't find a way to create a Brush Tip in AE. It's super easy to do this in Ps, and if the manual is to be believed if I create these brush tips in Ps, it should save to the Preferences and be available in all other CS3 programs. I made two different brush tips in Ps, but when I open up AE they aren't in the brush tip window (as far as I can tell).
So is this possible? Would make the work I'm doing much easier...
Thanks in advance.
John

Brush tips in After Effects are all round (circles, ellipses, or---at minimum roundness---line segments). You can't use custom-shaped brushes from Photoshop in After Effects.
If you want to request a feature for After Effects to be able to use custom brush tips imported from Photoshop, fill out the
feature request form.
For information about brushes in After Effects, see the
"Brushes and the Brushes panel" section of After Effects Help.

Similar Messages

  • Creating a "Tool Tip"  for an image

    Is there a dreaweaver extension for creating a "tool tip" for
    an image, or how do i create one?
    Thanks for your help
    Jim

    Jim,
    Put your tooltip text in the title attribute.
    HTH,
    Randy
    > Is there a dreaweaver extension for creating a "tool
    tip" for an image, or how do i create one?

  • Is it possible to create a tool tip for an individual cell?

    Hi,
    Is it possible to create a tool tip for an individual cell?
    Sun's JTable tutorial shows how to create a tooltip for an individual column:
    TableColumnModel tcm = table.getColumnModel();
    TableColumn tc = tcm.getColumn(0);
    DefaultTableCellRenderer renderer = new DefaultTableCellRenderer();
    renderer.setToolTipText("This is a tool tip text");
    tc.setCellRenderer(renderer);
    Thank you.

    See reply #2 below:
    http://forum.java.sun.com/thread.jsp?forum=57&thread=424429
    ;o)
    V.V.

  • Creating Dynamic Text Field for Flash CS3 in Illustrator CS3

    I've created a series of buttons in an illustration and made
    them into movie clip symbols in Illustrator. I then created some
    text fields for the button labels and assigned them as dynamic text
    in the Flash Text panel in Illustrator.
    When I import the illustration into Flash and test the movie,
    I get this error message:
    TypeError: Error #1034: Type Coercion failed: cannot convert
    flash.text::TextField@d18cef9 to flash.display.MovieClip.
    at
    flash.display::Sprite/flash.display:Sprite::constructChildren()
    at flash.display::Sprite$iinit()
    at flash.display::MovieClip$iinit()
    at menu2_fla::MainTimeline$iinit()
    It seems like Flash is misinterpreting the text fields
    brought in from Illustrator as Movie Clips?

    Download the TinkSpark source from http://code.google.com/p/tink/source/checkout and add the package to your project:
    Then write the following code:
    import ws.tink.core.Library;
    import ws.tink.events.LibraryEvent;
    import ws.tink.managers.LibraryManager;
    private function loadLibrary():void
         var library:Library = LibraryManager.libraryManager.createLibrary( "assetsLibrary" );
         library.addEventListener( LibraryEvent.LOAD_COMPLETE, onAssetsLibraryLoadCompleteHandler, false, 0, true );
         library.loadSWF("board.swf" ); //provide the path of board.swf, pls note board.swf is alos exported as AS3.0
    private function onAssetsLibraryLoadCompleteHandler( event:LibraryEvent ):void
        EventDispatcher( event.currentTarget ).removeEventListener( event.type, arguments.callee );
        var library:Library = LibraryManager.libraryManager.getLibrary( "assetsLibrary" );
        var AssetScore:Class = library.getDefinition( "Score" );
        var score:* = new AssetScore() as Sprite;
        score.scoreDisplay.text = "100";
        addChild( score );
    Warm Regards
    Deepanjan Das
    http://deepanjandas.wordpress.com/

  • Create a brush tip from an image

    This question was posted in response to the following article: http://help.adobe.com/en_US/photoshop/cs/using/WSfd1234e1c4b69f30ea53e41001031ab64-77fda.h tml

    What kind of post/question is that supposed to be?
    Would you mind elaborating?

  • How do I create full width photos for a website with Photoshop - Fireworks - Dreamweaver CS3 ?

    Greetings & Help!
    I'm trying to create a full width photo layout using Photoshop or Fireworks CS3 and then end with Dreamwaver CS3 without the photo's being tall.
    Exactly as the following websites - which all seem to be using the same size of photo or very close to it.
    This site is static with full width photos that are not tall.
    http://www.jenniferhandyproperties.com/selling
    This site is static for the most part and full width photos that are not tall
    http://www.gnvpartners.com/web/
    This site is Flash with full width photos that are not tall.
    expodesigncenter
    I would love to create a flash site just like expo but at this point I would settle for a static photo with the same size being the same on each page.
    Also I would like my site to be a liquid layout so the photo and everything else (text, Links etc) on the page flows correctly.
    The problem...
    I'm trying to use photo's from Istockphoto.com. The size of the photo's they offer are
    425 x 282 px (5.9" x 3.9")
    849 x 565 px (11.8" x 7.8")
    1698 x 1131 px (5.7" x 3.8")
    I'm selecting horizontal photo's. I do not know how to match the same width, height and appearence as the websites I mentioned above.
    If I choose a photo that fits the width then the length is too long. Also if I choose a large photo and have to crop it then most of the detail of the photo is lost.
    I'm attempting to create a mock-up for my web in Fireworks CS3 and after search Adobe and www I came across the mock up should be 1004px which would end up being 1024 with vertical scroll bar and small margins.
    I also have Photoshop & Flash CS3 but should mention (if you haven't already guess it by now) I am a rookie when it comes to creating a website.
    So if you can offer a solution in "Non-Tech Terms" I would appreciate it.
    Thank you in advance for your time.

    In the second example, the photo is set to background with a tile. The other parts are over top of the photo and done with layers with a background color setting.

  • How to create a Tip for a field in a Descriptive Flex Field in Self Service

    How to create a Tip for a field in a Descriptive Flex Field in Self Service ?
    Example :
    For Address
    Each Address Line should have one Tip.
    What should I do ?
    Thanks,
    John

    Hi John,
    It seems you have created Address Location DFF in self service in OA Framework.....
    I have created a Address Location flex in OA Framework . It dipslays the segments properly but i dont want to display the segments if they dont have any value.
    I only want to display segments with values . The segments with null values should not display at all...
    i.e , if Address Line 2 value is null , it should not display Address Line 2..
    If you have done this, pls let me know how to go abt it.
    Thanks in Advance,
    Tanveer

  • Adobe Elements 11 Editor: The MARQUEE for the brush tips often disappears!

    Adobe Elements 11 Editor: The MARQUEE for the brush tips aften disappears! The only solution that I have found is to shut the computer down then start up again. Is there a fix for this problem without shutting everything down?

    If it takes rebooting the computer to fix this temporarily, that suggests the problem is in the system's temporary memory. Most likely the VRAM (the RAM on your video card). I'd suggest making sure you have the most up to date drivers for your card (go to the manufacturer's web site to download them).

  • IPad Air iOS8.0.2. I used the photos app to edit my photos and created a new album for them. When I transfer my photos to my PC via cable (not allowed to use cloud services by my boss) i can only transfer the unedited versions. Any tips? Thanks!

    iPad Air iOS8.0.2. I used the photos app to edit my photos and created a new album for them. When I transfer my photos to my PC via cable (not allowed to use cloud services by my boss) I cannot choose this edited album, only transfer the unedited versions. Any tips? Thanks!

    Hi Anjohi,
    Thanks for visiting Apple Support Communities.
    If you've edited photos on your iPad and only see the original version when you import them to your computer, the tips in this article may help:
    iOS: Edited photos show original photo after import or in other apps
    All the best,
    Jeremy

  • I can´t install my self-created brush panel for PS CC as an extension.

    It´s always saying in the Extension Manager CC " Extension can´t be installed. "Photoshop 64-Version must be between 14.0 and 14.9." What does it mean. I´m using PS CC 2014.1.0 and I´ve created my brush panel with Configurator 4.

    I'm afraid that's because in the last release, Adobe removed the Flash support for custom panels.
    Maybe you can find more info here: Photoshop: Spring Cleaning | PHOTOSHOP.COM BLOG

  • Help Req for creating tool tip for value

    Hi ABAPers,
    I have created the search help for material.
    In search help output screen ,
                           I have the column contain a long text with the output lenght as 40 char that is displayed and once i put the mouse on it the entire  long text  should apears.
    Kindly help.
    Thanks & Regards
    Sachin Yadav

    If it is a input text field... i think not possible.
    This is only possible for buttons on toolbar (as far as i know)

  • Size/Angle Jittering and Scattering with a "brush tip" in full color?

    Is there any way to emulate the options available for a custom brush tip created from an image, yet still keep all the color information? I know this can't be done with a regular brush tip, but is there another way to pull it off other than copy/paste/rotate/shrink the source image over and over again?
    If it makes any difference, I'm using Adobe Photoshop CS3 Extended.

    No. By definition brushes are just opacity masks of a kind. Color information is not retained. What you want to do is much better doen in an animation program by using frame accumulation effects or particles to create trails of images. Another option would be Illustrator's art brushes and symbols, but of course those have limited blending options.
    Mylenium

  • Need help with creating a brush

    Hi guys,
    I wanted to ask for help with creating a brush (even a link to a tutorial will be goon enough ).
    I got this sample:
    I've created a brush from it, and i'm trying to get this kind of result:
    but it's only duplicates it and gives me this result:
    Can someone help me please understand what i need to define in order to make the brush behave like a continues brush instead of duplicate it?
    Thank you very much
    shlomit

    what you need to do is make a brush that looks like the tip of a brush. photoshop has several already but you can make your own that will be better.
    get a paintbrush and paint a spot kind of like what you did but dont paint a stroke. make it look kindof grungy. then make your brush from that, making sure to desaturate it and everything.
    EDIT:
    oh, and if you bring the fill down to like 10-20% your stroke will look better

  • Only see partial brush tip in CS4

    I have the brush tip setting set to Normal.  In CS3 I get a circle representing the brush tip regardless of the brush size.  In CS4, I only get a full circle for very small brush sizes.  Anything bigger and I only get a small upper left segment of the circle.  Is this normal?  It makes it very hard to tell where the lower right of the brush is.  If not normal what suggestions do you have for correcting this?
    Thanks
    Mike

    Thanks very much for the reply.  While your suggestion didn't work, it pointed me in the right direction in mentioning the video driver.  Aftrer updating to CS4 11.0.1 and updating the video driver didn't work, I fiddled around with the video card settings and discovered that dropping the hardware accelleration setting down one notch (from max) restored the brush tip to a full circle at all sizes.

  • Brush tip icons in CS4 and painting w brush tip icons

    Why in CS4 Photoshop do none of the brush tip  icons paint to the edges of the icon dashed line. They all paint 4 to 5  (etc.) pixels behind the brush tip line. CS2 & 3 painted dead on the  brush dotted line if one desired. Am I missing how to do this??? in  CS4? I am not painting with the soft brush, but the HARD brush. I expect the brush tip icon to show me exactly what area I will paint. Am I wrong???

    Chris, I have looked everywhere in CS4 preferences to adjust the
    "bounds" setting for a brush, but cannot find it. I see the sliders for
    MASTER DIAMETERS of a brush and the HARDNESS of a brush.
    I can't remember ever having to set bounds in previous editions of
    PS, or I could be wrong.
    To be clear on what is happening, if I create a brush that is 110 pixels
    wide w hardness of 100, shouldn't CS4 paint a solid 110 pixel circle,
    exactly within the LIVE brush icon from dotted edge to dotted edge
    of the brush icon? My brushes paint behind the dotted lines.
    This makes me guess where the brush paint lands on the canvas
    within the dotted brush icon.
    Sorry if I am wordy. Just a wierd experience w the brushes in CS4.

Maybe you are looking for