Create a call blast with a single extension number

Hi
I would like to create a call blast with a single extension number but i's no possible. How can I get around this?
Thanks

I can't for the life of me see the point in this, you could just assign another dn as an overlay or secondary number, but what you *could* do is:-
create a dummy ephone-dn (any number) and add this into the list of numbers? (siince you need a minimum of two this should work fine).
since it will not be assigned to any phone it will not cause any issue that I can see.
p.

Similar Messages

BAPI_BILLINGDOC_CREATEMULTIPLE, creating a Bill doc with a single line item

Hi there,
I am trying to create a Billing document with reference to Sales document using this BAPI (BAPI_BILLINGDOC_CREATEMULTIPLE)
..but the generated billing document is creating only single line item where as the original Sales document is containing a Two line items, ie. 1 main line item an a Sub line item for this .
I am passing the Values mentioned below..
As per requirement is need to create a Pre invoice or a Proforma with Provided Sales Document.
it_billingdata_in-ORDBILLTYP = Proforma/Preinvoice
it_billingdata_in-REF_DOC = Reference Sales doc number
it_billingdata_in-REF_DOC_CA = Reference Sales document category('C').
Can some one please suggest any thing else do i need to pass apart of these field..
Appreciate of some one answer me.
thanks
Srinivas

Hi Srinivas,
You need to loop on the internal table 'it_billingdata_in' based on the Sales Order line items and pass the value to 'it_billingdata_in-REF_ITEM' for every line item of the Sales Order.
Hope this helps.
Regards,
Pranav.

After 4.3.3 update, with International assist enable, all US calls start with 001 area code number. If disabled, works as before upgrade. New feature ? working as new design?

I upgrade my 3GS yesterday to version 4.3.3 without changing any settings. Now all incomming US calls are displayed starting with 001 + AC + Number. Incomming calls do not match entrys in contacts list. Calling number cannot be dialed back with the way the number presented e.g. 001 +.
International assist is enabled under settings. When International Assist is disable, works as it has for the past year + (the way it should)
Is this a new feature with version 4.3.3?
Or working as new design feature?

Gweeper64 wrote:
I'm sorry you've had a bad experience, but the page does say:
Limited time offer! Only available by calling:
CALL 877.873.3278
Could that be any clearer?
Seems pretty clear to me. Even though they do not give an expiration date, it is certainly implied that it will expire at some point. If they give you the deal, then great. If they don't give you the deal, though, it seems that you are just crying for something that you don't deserve and that Verizon has no obligation to provide for you.

Creating a pdf document with both single pages and spreads

Hi, i'm not sure if this is possible, but basically i'd like to set up a document which allows me view the first three pages as single sheets and the remainder of the document as a booklet. The reason for this is I'm sending a cover letter, CV and then a booklet via email to apply for a job, and the booklet i have created has graphics which run accross the spread. I was hoping to lay the document as such:
1. cover letter
2. CV
3. Booklet front cover
4-5. booklet spread
6-7. booklet spread
8-9. booklet spread
I'm not too familiar with how to set this up (or if this is possible), could anyone point me in the right direction?

@Dave Merchant - The pages are true spreads, I've had a go at attempting to define the page type by the master but i can't seem to get it to split the document so that the first three pages remain single. I had a go at trying to create an entire new document with the pages in in order, but not sure how to insert single pages and spreads combined within the document.
@Test Screen Name - Do you know how i would be able to create such a document within indesign? i've had a look for some answers in the documentation but havent come accross anything yet (im on CS5). I had a go at combining the documents as the booklet and the single pages, but when i change the view options in acrobat to two page the first pages becomes a cover and the second and third are next to each other.

Multiple PO's created for a SC with a Single line item except delvery date

Hi Experts,
I have one issue ... SRM - Classic scenario
One Shopping Cart created with one line item ... but generated two PO's EX - First one - A and Sec - B
Almost the data is ame except the delivery date .
There can be a possibility that it was splitted into two PO's .. I will accept it ... but the problem I am facing is different ...
When I am trying get the PO details in SRM side .. using Tcode BBP_PD ... I am able to see two PO's ...
But when I am trying get the PO details using the FM - BBP_PD_PO_GETDETAIL .. here I am able to see only one PO that is B here ...
I am not able to find PO - A in SRM Side ...
But I can See in the backend sys .. R/3 ... TWO PO's (A and B) are available ......
IN backend system we are having one Report Program Which will display the Shopping cart number for the perticular PO number ... when I am trying to execute this report to get the Shopping cart number for A Purchage Order ... I am not able to get the Shopping cart number ... message is Shopping cart does not exist ... in this program we have used the standard FM only ... there is no problem with this report ...
My Question is Why I am not able to see the first PO ( A ) at SRM end ... there is table where the PO's get stored at SRM end BBP_PDBEI .. in this table also I can see only the PO - B not A .
1.Please let me know what can be the problem ... and guide me to find the PO at SRM end ...
2. Why the Shopping cart converted into Multiple PO .. when thr is only one line item ...
3. I think PO cannot be split into multiple PO's based on Delivery date ...
We have not done any splitting criteria in our system ... everything is standard only ...

hi Hari
only one PO is possible . check the item both are same or not.
for eg. one sc created and went to cockpit for vendor assignment - PO will created from purchase rside
in the mean time end user change the material in the cart via check status and assign valid source of supply and PO will create.
1 sc- 2 POs created in my past experience.
and deleted which PO i dont like.
in BBP_PD you can not see PO docs, since you are in classic ? you can see if it is order as direct material since PO will create in SRM though it isa classic..
what really happened in your system,
po split for delivery date means how did you get different dates.
br
muthu
Edited by: Muthuraman Govindasamy on Oct 27, 2009 12:10 PM

Deal with multiple inbound calls on 2 x BRI to one extension number

This feels like a really dumb question but I have RTFM and still am stuck.. This is my first UC setup, although I do a lot of IP networking...
We have a UC540W with 2 x BRI so up to 4 PSTN calls.
I want the inbound calls to go to extension 100 which should appear on a line key on all phones so any user can & should pick up incoming calls.
Phones are SPA500 Series (504 and 508)
I am working in CCA.
If I set it up with Line 100 as a shared number on all phones then only 2 calls can be presented and the 2nd call is only presented to the phone with the first call on it, the line key just shows as in use (red) on all other extensions.
The phones are not octal line compatible otherwise this would seem to be the answer to the problem.
I tried setting up (Via CLI) multiple ephone-dn with the same extension number and these appeared in the list for setting an overlay button, but CCA then overwrote these which makes it an unsuitable solution.
The other option would seem to be to set up a multiple extensions (101-104) and put these into a hunt group and under an overlay button, but as these numbers won't be assigned to an extension so can't see how to create these within CCA - if I put them in as floating extension then they appear in the list for an overlay button but not in the available list for setting up a hunt group....
This doesn't seem like such an unusual setup that it should be so difficult...
TIA
David

AFAIK you can have one iCloud account per user account and I can't find any suggestion that there is a limit to the number you can have.
However if in doing all this on the Mac you are talking about you have already created three iCloud accounts then you can't create any more, and there is no workaround for that. You can still sign into an existing iCloud account which has been created on another device, so is the sixth account you are talking about one which already exists? If it isn't, then you would have to use anoter device to create it, then you should be able to sign into it.
As to 'dissociating', just signing out in System Preferences>iCloud should do it. AFAIK the accounts are not tied to the hardware.
All this is to do with iCloud - iTunes accounts are a different can of digital worms and may behave differently.

Publish a multifolio-viewer with DPS Single Edition

Hello everyone!
I am trying to publish a periodical DPS magazine.
How can create a multi-folio Viewer with the DPS Single Edition?
Cheers,
patomo

You can only create built in Apps with DPS Single Edition. Multi Issue apps cannot be created using DPS SE or DPS CC.
For creating Multi Issue apps, you'll need to switch to DPS Professional or Enterprise Edition.

UCCX call back - 10 digits number followed by an extension number

Hi,
I've built the UCCX call back script which works fine for 10 digits direct lines. In case, if caller doesnt have a direct line, and he wants to leave a 10 digits pilot number followed by 5 digits internal extension number. How to achieve this in UCCX?
For example - 614-XXX-XXXX (extension XXXXX)
Has anyone done something similar in the past? Would really appreciate your quick response.
Thanks.

Thanks Anthony. That means,
- Use 10 digit number in "Destination" field of Call Consult transfer step
- Provide extension number in the "Outpulse Digits" field
- What does "Timeout" mean in this step?
How the pause things work in this step. I mean, once 10 digit number is dialed and connected, then is there any pause in between before extension number is dialed by the system automatically? What typically happens is, company will have the welcome greeting, then they offer you an option of dialing party's extension number? If there is not enough pause in the "Call Consult transfer" step, how will it be taken care of ?
Thank you very much !

Caller ID using my Office Landline number

Hello,
is there possible to set My Caller ID with my office landline number? and how much the price cost?
and then can you help me set up my landline number as caller ID?
I want to add my office landline number as Our office Caller ID
Please inform me again
Best regards
Rama

Hey brother, I got an email back from customer service.
"We understand that you wish to add your Google Voice number as your caller ID for your Skype account. We are here to clarify this concern.
It is not possible to set up your Google Voice number as your caller ID in Skype. We recommend that you use Skype Number or a mobile number as your caller ID."

Create a static phone with extension number

Hi
I want to create a new phone in CUCM 8.6 for reception which cannot be logged out but also has an extension number. I have already have the phone installed with the mac address on CUCM and description but when i plug this in it still asks for staff login to make external calls. I am also unable to make internal calls to it from my phone.
Any assistance would be greatly appreciated.
Thank you

If you're using EM, just don't use EM on that phone and assing the DN to it.
About not being able to make calls, if you hear "your call cannot be completed as dialed..." that's CSS and partitions issues.
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk

I started to learn HTML, and I'm using text edit and everything is going fine, when I save the file with a .html extension and open it with safari I only view the code and not the webpage that was supposed to be created.

I started to learn HTML, and I'm using text edit and everything is going fine, when I save the file with a .html extension and open it with safari I only view the code and not the webpage that was supposed to be created.

That is because you don't have a web server configured and running to serve the html page. In order to see the page in a browser you need to access it using a url similar to http://localhost/~yourUserName if you are serving the page from your user account.
Prior to Mountain Lion you could go into web sharing and turn on the web server. With Mountain Lion there is no option, other than using terminal, to turn on the web server. The web sharing menu item has been removed in Mountain Lion. Apache is still on your computer but it will take a little searching these forums or the Internet to find how to turn it on.
If you want a graphic user interface to turn on/off the Apache server you could download and install a server application like xampp, http://www.apachefriends.org/en/xampp.html. I use this and it works well.

I was having an issue opening a spreadsheet with the file extension .xlsm. This appears as an attachment from a client which means macros were utilized when creating the spreadsheet. The problem lies in. The iPads ability to open the attachment. I downloa

I was having an issue opening a spreadsheet with the file extension .xlsm. This appears as an attachment from a client which means macros were utilized when creating the spreadsheet. The problem lies in. The iPads ability to open the attachment. I downloaded the numbers app thinking this would be a default software to open any and all spreadsheets.
Please Help!
Ipad 2- iOS5

You may need a version without macros on it. Unfortunately, pretty much all apps are skinned down versions of their original program, often with less functionality. For example in a word document I can italicize,bold and underline, but I only have a handful of fonts to play with and I don't think I can insert tables or images.
It is very possible that the app simply cannot run macros, which means that document may never work on an iPad.

Creating a Select-option with no-intervals and a parameter on a single line

Hi
I have a unusual reqirment of creating a select-option with no intervals obligatory and a parameter on a single line. Is this possible? Can any one please provide me a solution for this. I reffered to the SAP help and what i found out is a single line can contain only parameters.

Hi,
humm,
I guess it's not possible on one line.
SORRY I've tried and it works!
Try this :
SELECTION-SCREEN BEGIN OF BLOCK main WITH FRAME
TITLE text-s01 NO INTERVALS.
SELECTION-SCREEN begin of line.
PARAMETERS : p_gjahr LIKE bkpf-gjahr OBLIGATORY MEMORY ID gjr.
SELECT-OPTIONS : s_blart FOR bkpf-blart MODIF ID knt .
SELECTION-SCREEN end of line.
SELECTION-SCREEN END OF BLOCK main.
Regards,
erwan

Captivate 8 : the PDF export created a file with a PDF extension.. but it's actually a video. Shouldn't it export the slides as a proper PDF document ?

In Adobe Captivate, there is a "PDF export" checkbox available when you publish your project.
It checked the box, and the project pulication created a file with a PDF extension.. but it's actually a video. Shouldn't it export the slides as a proper PDF document ?

Thanks for the quick answer. I did not know about interactive PDFs..
I just found how to export as a Word document. I would have expected to find that option in "Publish" or "Export", not "Print".. Anyway, I now have what I needed

How to create flip book in InDesign so it starts with a single page

The flip book out of InDesign is cool - but I have not been able to find a way to create it so that it starts with a single page, rather than a spread (with a blank white page opposite the cover). Any help appreciated.

Moving thread from Creative Cloud Forum to InDesign Forum.
Hi there,
Currently, there isn't a direct way to make the cover page a single page through InDesign. You'll need to 'fake' it by fill the left side (first page) of the spread the same color as the background of your web page.
Petteri_Paananen has suggested an alternative workaround using eDocContainer. You can find more info here: http://forums.adobe.com/message/2279180#2279180#2279180
Hope this helps and feel free to let us know if you need more assistance

Create a call blast with a single extension number

Similar Messages

Maybe you are looking for