Create a contact that will dial an external conference and enter a pin, using Lync

Greetings!
Let me describe a scenario.
On my cellphone, I can create a contact that will dial an external conference number that is not a Lync Meeting, insert a pause (with commas) enter a pin with a # at the end, because that particular conference system asks for pin followed by #.
The phone number for that contact on my phone is 18005551212,,,,1234#
Is there a way to do something similar to a Lync contact? or, as an Outlook contact that will pause and then enter the pin chars?
Well, thanks very much for reading my question!

Landis said no a while back:
http://social.technet.microsoft.com/Forums/lync/en-US/794fb7a5-f55e-4ca7-8f2e-d6264d7607f0/lync-conference-id-automatic-dialing?forum=ocsclients
And I don't believe that's changed. Effectively, the number you typed for the contact isn't what's sent. That gets normalized into what's sent. I think the only way to send pauses between DTMF is manually through the dialpad.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications

Similar Messages

How to Best Create a DVD that will play on BOTH Mac and Windows

Hello - Looking for some direction. How can I create an iDVD DVD that will play on both Mac & Win? I can not find a solution that will accomplish this. What I did was create an .img then burned to DVD. This plays fine on my Mac & on home stereo DVD but not on a windows machine. The Windows machine can "read" the DVD fine but WIndows Media Player can not play it. Do I need to have folks use a special player on WIndows? Is there another format the I should have iDVD output? I need to send some DVDs to college coaches for my son and am trying to do this the best way without knowing what platform (Mac or WIn) they will be using. What is the best approach?
Thanks in advance for your help,
David

Hi
There are two ways to burn a DVD.
• as a Data-DVD (eg including a video.img file or any data)
• as a Video-DVD
A. Data DVD is what You creat by just popping in a DVD disk and OK to format it.
B. Video-DVD - You make from within iDVD and insert thed DVD WHEN iDVD asks for it
(OR - Via Disk Util tool - Still introduced when asked to do it !)
(or via Roxio Toast™ - STILL not inserted until asked to do this)
So what You've done is a Data-DVD with Your movie as an .img file on it.
• Can only be playbacked on Your Mac
Open "Disk Util tool"
Then on Dasktop - Double click the .img file so that it creates a fake DVD disk
Then in "Disk Util tool" - select it and click the Burn (Nuclear) button
THEN insert a new DVD WHEN asked to do this.
NOW ! ! Select a lower Burn Speed eg 4xDVD - This will result in a DVD with few burn errors and
a PC will read it easier !
Use of quality DVD brand is also important - I use Verbatim
I use DVD-R
Good Luck - Bengt W

How to create dynamic stamp that will prompt for Cause number and exhibit number?

I have a need to have a three line custom stamp that will look like the following but will allow a user to input the Cause number then the exhibit number, then successively number exhibits that the stamp is applied to:
EXHIBIT
12:74130
001
Exhibit will always be the same, but the cause number would need to be modifiable per batch possibly and I would like to be able to update the exhibit number to have a unique number on each page of exhibits....or just each exhibit.
Can that be done?
thanks!

It sounds like you are trying to use a retail serial as an enterprise serial and would like to bypass it's restrictions by deactivating it . . . I assume that's not possible, but perhaps I don't understand your issue.
I doubt you'll get a good answer on the forum. Try support, your sales rep, or a help link on the licensing web site (if there is one).
Ben

Can I create a template and that will allow me to add a region when i use i

Is it possible to create a template that will allow me to add a region when i use the template on my pages? I have a region that allows the user to create content in the region, but now i would like to have another region next to it.
thanks
Angie

You cannot add regions on a page that uses a portal template.

How Do i create a list that will show in a dropdown box with the list being pulled from another tab and not the cell data format junk?

How Do i create a list that will show in a dropdown box with the list being pulled from another tab and not the cell data format junk?
I currently run OS X 10.10.1
Now i have been trying to work on this for a while now and what i want to do should be simple but its apparently not.
Here is an example of what i want to happen.
I will have 2 tabs: Contact | Sales
Now Contacts will have the list of names and various information about a customer, While Sales will have one drop-down box for each Cell Row that will show the names of the person in tab contacts
for what i am wanting to do i cant use the data format pop-up menu because the list is edited everyday several times a day.
Now how do i do this, Excel can do this so how can numbers do it?

Hi Shegra,
Paste this into a applescript editor window and run it from there. In the script you may need to adjust the four properties to agree with your spreadsheet. Let me know if you have any questions.
quinn
Script starts:
-- This script converts column A in one table into an alphabetized list of popups. It copies the last cell in that column. Then reverts the column to text. It then refreshes popups in column A of a data table starting with a user defined row.
property DataEntrySheet : "Sheet 1" --name of sheet with popups to be refreshed
property DataEntryTable : "Sales" --name of table with popups to be refreshed
set copyRange to {}
property PopValueSheet : "Sheet 1" --name of sheet with popup values table
property PopValueTable : "Contacts" --name of table with popup values
set PopStartRow to {}
tell application "Numbers"
set d to front document
set ps to d's sheet PopValueSheet
set pt to ps's table PopValueTable
set s to d's sheet DataEntrySheet
set t to s's table DataEntryTable
set tf to t's filtered --this records filter setting on data Entry Table
display dialog "Start from row #..." default answer "" with icon 1 -- with icon file "Path:to:my.icon.icns" --a Week # row
set PopStartRow to {text returned of result}
tell pt --convert list to alphabetized popups
set ptRows to count rows
set copyRange to ("A2:" & name of cell ptRows of column "A")
set selection range to range copyRange
set selection range's format to text
sort by column 1 direction ascending
set selection range's format to pop up menu
-- popupsmade
set selection range to cell ptRows of column 1 of pt
set v to value of cell ptRows of pt
end tell
activate application "Numbers"
tell application "System Events" to keystroke "c" using command down
tell pt
set selection range to range copyRange
set selection range's format to text
end tell
tell t
set filtered to false
set tRows to count rows
set pasteRange to ((name of cell PopStartRow of column "A") & ":" & (name of cell tRows of column "A"))
set selection range to range pasteRange
tell application "System Events" to keystroke "v" using command down
set filtered to tf
end tell
end tell

I updated to Lion OS10.7.5 and I have duplicate contacts that will not merge. How do I fix this?

I updated to Lion OS10.7.5 and I have duplicate contacts that will not merge. The duplicates were created when I synced my phone (which I have done a hundred times!) How do I fix this?

Try the 10.7.5 supplemental update.
http://support.apple.com/kb/DL1599

OK, I need to be able to have a linked TOC, and also have destinations created in FM10 that will not be lost when I 1. Save the book as a PDF. then 2. need the PDF to be as small as possible, but without losing my destinations. Anyone know how to do that

OK, I need to be able to have a linked TOC, and also have destinations created in FM10 that will not be lost when I 1. Save the book as a PDF; then 2. I need the PDF to be as small as possible, but without losing my destinations. Anyone know how to do that??
I had been saving as a PDF and then reducing the size of the PDF by printing it as a PDF with a degree of image compression. I write manuals with a LOT of screen captures and line art that needs to be clear. So it is a balancing act between image clarity and PDF size. The PDFs on the web need to be smaller - sure you can undertsand.
Anyway, when I print the PDF again, I lose both my destinations and bookmarks.
Anyone know of any way to avoid that?

Control the images by creating a custom PDF Job Options and then selecting it in the PDF Job Options drop-down of the PDF setup dialog box (File > Save as PDF...)
Create the custom PDF Job Options file with Distiller. If you do not have Distiller, open the Printing Preferences of the Adobe PDF printer. Start with the Smallest File Size Job Options settings and Edit.

Is it possible to create a configuration profile that will install multiple network printers and their associated drivers

Is it possible to create a configuration profile that will install multiple network printers and their associated drivers?
I was not able to find profile manager on my employer's installation of 10.6 Server. Is this only a feature of 10.7/10.8 server?

10.6 server does not have profile manager, profile manager is only available in 10/7 and 10.8 server
for 10.6 server you'll need to use wgm and server admin
printer management with 10.6, I recommend you read the relevant server manuals regarding
print server and user management, printer management

Having stopped audio with a swf inside a sidelet can someone create a swf that will resume the audio

Ok, rick is going to post the fla of this file and I will
post the swf. Basically this is all about having a slide that has
audio running all the way through and enabling the user to roll
over a sidelet and have the video and audio stop playback.
At present, the max you can achieve is, to stop video. The
audio keeps going and of course everything gets out of
sync. Rick has create a swf that you input into a sidelet (
after having imported your image or video ) which stops the audio.
Fantasitc. Unfortunatly he was not successful in creating a swf
that will resume the audio.
So there is the mission. To create something that will resume
the audio, be it a swf inside the sidelet or something else.

Hi there paul. Am I right in thinking that your code will
mute the audio. In my situation this would cause problems becasue
you would roll over the sidelet - the audio would go silent and
when you rolled off, or resumed the audio, it would have been
playing so again the video and audio will be out of sync.
Rick - rather than another swf which would activate the audio
and video when you roll off the sidelet ( while that is the perfect
solution ) what about looking at a button the user can press to
resume things, maybe Im wrong but that sounds a little easier.
( however for all those reading this that is not really the
solution I am looking for, what Im looking for is the above
solution where you can just roll off and on and so on )

Create a Procedure that will accept a variable

Hi,
I'm new to pl/sql and I'm trying to create a procedure that will accept a variable. I want to use this sql to create restore points that can store the name of each batch job as it runs.
The code works fine on it's own, but if I try to create the procedure it asks me for a value for 1, how do I stop it doing that?
CREATE OR REPLACE PROCEDURE create_restore_point AS
DECLARE
pointno number(5);
pointname varchar2(128) := upper('&1');
dbname v$database.name%TYPE;
scn_time date;
scn number;
BEGIN
SELECT restore_point_seq.nextval into pointno from dual;
SELECT name into dbname from v$database;
SELECT sysdate into scn_time from dual;
SELECT dbms_flashback.get_system_change_number into scn from dual;
INSERT into restore_point
values
(pointno,pointname,dbname,scn_time,scn);
commit;
END create_restore_point;
Many thanks in advance,
Tom.

It asks for value of 1 because you have &1 in your code. If you want to pass the value for pointname, then you can change your procedure like below.
CREATE OR REPLACE PROCEDURE create_restore_point (svar varchar2)AS
DECLARE
pointno number(5);
pointname varchar2(128) := upper(svar);
dbname v$database.name%TYPE;
scn_time date;
scn number;
BEGIN
SELECT restore_point_seq.nextval into pointno from dual;
SELECT name into dbname from v$database;
SELECT sysdate into scn_time from dual;
SELECT dbms_flashback.get_system_change_number into scn from dual;
INSERT into restore_point
values
(pointno,pointname,dbname,scn_time,scn);
commit;
END create_restore_point;

Create a tab that points to an external link ?

Hi,
Oracle 11g r2.
Apex 4.1.1.00.23.
I need to create a tab that points to an external link (actually a link to our old Forms application).
For the moment, I simply added the tab "manually" in the template by writing the needed HTML after the #TAB_CELLS# substitution string.
It works but it does not allow me to control authorization scheme, etc.
Is there any way I can create a tab without associating it to an existing page, but pointing to an external link ?
Thank you.
Yann.

Hi,
Create page zero to your app if you do not have one.
Create tab that lead to page zero.
Edit tab and check what is tab name.
Tab name (not label) is important as it is reguest when you press tab.
Create application process On Submit: After Page Submission - Before Computations and Validations like
apex_util.redirect_url('http://www.google.com');Set condition to process Request = Expression 1 and enter to Expression 1 your tab name (not label)
Regards,
Jari
My Blog: http://dbswh.webhop.net/htmldb/f?p=BLOG:HOME:0
Twitter: http://www.twitter.com/jariolai

Create a window that will always ontop

pls am having a problem creating a window that will always on top such that it cannot be minimized that cannot go to the background ,will always be on top like the task manager in windows
help meeeeeeee!!!!!!
my email:[email protected]

http://forum.java.sun.com/thread.jsp?forum=57&thread=121761
Try searching the forums, this has been asked many times before.

Is it possible to create a bean that will generate (fill up) applet paramet

Hi all,
As a newbie I was asking myself is it possible to create a bean that will fill up applet parameter or directly generate the applet ??
And I can I create it ?
I mean : Having a jsp page that make reference to the bean, the bean shall generatehtml applet parameter values.
Some samples will be welcome or a template.
Thanks in advance
Shamann

Thanks a lot for your reply siv viv,
I've posted this thread because I'm a little bit disappointed with Applet and jsp according to lot of thread about this subject (it seems that communication between applet and jsp is not easy : bug reported).
The basic thing i want to do is to create a dynamic Pie Chart as applet or bean so i need to set applet parameter thanks to variables.
See the http://forums.java.sun.com/thread.jsp?forum=45&thread=80250 this one is putting me in the dark.
regards
Shamann

Firstly hello to all. I'm looking to create a vi that will take a single logged output from a thermocouple and monitor the temperature and produce a Boolean when the temperature has stabilised for a pre determined time say 1minuet.

Firstly hello to all. I’m looking to create a vi that will
take a single logged output from a thermocouple and monitor the temperature and
produce a Boolean when the temperature has stabilised for a pre determined time
say 1minuet. I have managed to find a couple of examples on the forum but one
will only run on V8.2 and I have V8, the other is for more than one channel
witch is fine I can always reduce this, but it was the timing feature I was
having difficulty with. I looking to monitor the temperature of a motor until
it has stabilised prior to testing and then to use this temperature as a
reference. Pleas forgive my ignorance if this is a very simple thing but I’ am
learning and really enjoying it. Thank you in advance for your answers.

Hi
Graham, thank you for you reply.
What I’ am trying to achieve is a vi I can use in a motor
testing setup, a part of this would be to warm the motor up until the exhaust
air temperature has stabilised, this takes approximately 10 minuets. I was
thinking of just letting the motor run for this time and leave it at this, but
some motors warm up quicker that others and. I am basically looking for a vi with
an adjustable temperature window of say ±5 C° in 1° increments, timing wise 1minuet
to 10min the adjustment is so I a can use this for another application. I tried
to adjust the code I found at the link below but had a little difficulty with
the timing. Thank you so much for your help it’s much appreciated.
sine.ni.com/niforum/niforum?forumDU=http://forums.ni.com/ni/board/message?board.id=170&message.id=251017&requireLogin=False

I need instructions on how to create a button that will email a pdf form to someone else on a websit

I NEED ASSISTANCE CREATING A BUTTON THAT WILL EMAIL A PDF FORM FROM A WEBSITE TO WHOEVER THE VIEWER WANTS TO

Just a bit more info. E-mail can be used, but has potential problems -- often related to the client machine that you have no control over. Use the data submissions (either FDF or XML) rather than the full PDF so you do not have to deal with Reader Rights and the related license issues. The FDF and XML data files are easily imported into the original form so that you see what the client sees. With those aspects in mind, just go ahead and try one. Be aware that you can add form fields using the form tools in the Advanced Editing tools, OR use the forms menu that will take you to Designer. You might want to try both to see the pros and cons. Be sure to keep such a test simple so you are not wasting time on your final form just for testing. I typically create a 1 page form that has all of the possible fields for such a test.

Create a contact that will dial an external conference and enter a pin, using Lync

Similar Messages

Maybe you are looking for