Create a default layout

Hi!!
As well as in r/3's alv you can :
*select layout
*modify layout
*save layout
*manage layout
It's possible to do the same in webdynpro's alv??
I would like to save layout and to create a default layout and I only can save a layout.
Thanks in advance.

Hi,
Yes you can do that in WDA ALV.
* Click Setting in your ALV ( at top right corner )
* Define your column selection, sort, filter, etc.
* Save as your setting
* When you Save As, there is a check box Initial View. Check this check box and will make your layout as default.
Regards,

Similar Messages

Reports 3.0 - Default Layout

Can anyone help me with Reports 3.0? I'm changing the Data Model
and want those changes to be reflected on Layout. (in Reports 2.5
this used to be done via Default Layout, it used to display a
Warning and after acceptance it used to change the layout
according to new Data Model). How to do the same in Reports 3.0?
Thanks in advance
JP
null

JP (guest) wrote:
: Can anyone help me with Reports 3.0? I'm changing the Data
Model
: and want those changes to be reflected on Layout. (in Reports
2.5
: this used to be done via Default Layout, it used to display a
: Warning and after acceptance it used to change the layout
: according to new Data Model). How to do the same in Reports
3.0?
: Thanks in advance
: JP
The only way I've been able to do this is to go into the layout
editor and from the Edit menu pick 'select all' and delete
everything. Then go into the margin and do the same thing. When
you click the 'run' icon you will get a message that says
'You cannot run without a layout. Would you like to create a
default layout?'. Not pretty but it works, hope this helps.
Karen
null

Report Wizard 10g default layout

I have a lot of data columns in my report and want the wizard to generate a default layout 132 columns wide. However the wizard always defaults to only 80 columns and wraps fields and headings to multiple rows. Is there a way to make it default a wide layout so that all fields are on a single row?

In the object navigator, I expanded layout section main and set properties for body section with a wider width of 1200 points(desfault was 512 points) and orientation landscape and then used report wizard to create a default layout and it still defaulted to 80 columns portrait. I also tried character mode with a col size of 132 and it still doesn't work. Has anyone seen report wizard default layout spanning 132 cols or more? I usually get a 80 col default and extend it manuallly to the right.

Default Layout for a report running in background

Dear Friends,
I have created a layout for report ME2L and set as default layout (for every user)....
Foreground execution picked the DEFAULT layout but when am trying to execute the same report in background, default layout is not picked but the STANDARD layout is shown in the spool
Could you please suggest me how can i use same report layout for foreground as well as background
Thanks in Advance
Ana

Atanu dey,
If you wnat to download excel in back ground
You have to download in application server only.
EX:
DATA : v_filepath(80)     VALUE '/data/sapdata/inc/error_log/pme_br/',
c_coma     VALUE ',' .
OPEN DATASET v_filepath FOR OUTPUT IN TEXT MODE.
    IF sy-subrc EQ 0.
     LOOP AT i_errors_bat.
     CONCATENATE i_errors_bat-plant c_coma
                             i_errors_bat-zzvendor c_coma
                       INTO v_string.
        TRANSFER v_string TO v_filepath.
      ENDLOOP.
   CLOSE DATASET v_filepath.
Note : you can download in presentation server also.
but it requires lot of authorizations and have to use
FTP commands.
Reason is Apllication server in back ground has to
recognize the from which system request came.
Better go for OPEN DATA sets.
Don't forget to reward if useful.....

Urgent: How to create a new layout for portal lightframeworkpage

Expert,
I want to create a new layout for external facing portal. I have created a new par project also in NWDS, but being new I do not know where to get "com.sap.portal.layouts.default.par" and other supporting libraries.
Need an urgent help.
Thanks in advance
-Lave Kulshreshtha

Hi,
Look into this blog to know, how to write custom layouts:
Nuts and Bolts of the External Facing Portal (EFP)
Once you wrote your layout jsp, then declare it in portalapp.xml like this:
<component name="example_narrowWide">
      <component-config>
        <property name="ClassName" value="com.sapportals.portal.pb.layout.PageLayout"/>
        <property name="SafetyLevel" value="no_safety"/>
      </component-config>
      <component-profile>
        <property name="ComponentType" value="com.sapportals.portal.layout"/>
        <property name="com.sap.portal.pcm.Title" value="2 Columns (Narrow:Wide)"/>
        <property name="com.sap.portal.pcm.Description" value="two-column layout displaying the narrow column on the right"/>
        <property name="com.sap.portal.reserved.layout.TagLibLayout" value="/SERVICE/com.sap.portal.pagebuilder/taglib/layout.tld"/>
        <property name="com.sap.portal.reserved.layout.TagLibHtmlb" value="/SERVICE/com.sap.portal.htmlb/taglib/htmlb.tld"/>
        <property name="com.sap.portal.reserved.layout.TemplateFile" value="*yourLayout.jsp*"/>
        <property name="AuthScheme" value="anonymous"/>
        <property name="com.sap.portal.reserved.layout.Cont1" value="Left Column">
          <property name="plainDescription" value="Column 1"/>
          <property name="orientation" value="vertical"/>
          <property name="designClass" value="prtlPageConL"/>
        </property>
        <property name="com.sap.portal.reserved.layout.Cont2" value="Right Column">
          <property name="plainDescription" value="Column 2"/>
          <property name="orientation" value="vertical"/>
          <property name="designClass" value="prtlPageConR"/>
        </property>
      </component-profile>
    </component>
As all the layout taglibs and required classes are in com.sap.portal.pagebuilder application, you should refer to it in your portalapp.xml SharingReference property.
Try all this and if you have specific questions, let me know.
Regards,
Praveen Gudapati

Wrong default layout for a new customer

Hi all,
I hope somebody can share inputs with regards to this issue.
I'm assigning a default layout to one customer group (layout1 for all Group1). When this was done, a list of customer codes were included in the list and each were ticked from that list.
Second layout called layout2 for the setting 'Set &as Default for all BPs (for Whom a Default Layout Has Not Been Assigned).
Scenario: A new customer code is created belonging to Group1.
Issues:
            a. This new customer code does not automatically follow the setting on default layout which is layout1. When the layout1 default setting was double
                 checked, the new customer code was part of the list, but it was not ticked.
            b. When document was previewed, it uses the wrong layout2.
            c.   The user still has to update the layout1 default setting, ticking the tick box from the list for the new customer code, then clicking update in then
                  layout designer window.
Question: Is this a normal behaviour of the system? I thought that setting it as default for certain customer group will be applicable even to newly created ones under that group.
Regards,
Cathy

Hi,
I am afraid that it is your SAP B1 version current behavior but you may check using demo database. What is your SAP B1 version anyway ? what is your database localization ?
You may try the solution part from one of these notes below:
993486 - 'Set as Default for All BPs' doesn't affect specific BP
Version 5 Validity: 21.01.2011 - active
Language English (Master)
Portuguese
Content:      Summary    |    Header Data    |    References    |    Validity
Symptom
Specific printing template for Business Partner can not be changed in attempt to define printing template as a default template for all Business Partners.
Cause
Functionality description
Solution
In order to change a specific default printing template for Business Partner follow the steps below:
1. Choose the required template and press on the 'Set as Default' button.
2. Choose the 'Set as Default for Specified BP' and 'Set as Default for Current User' option.
3. Uncheck the box near the BP name and press on the 'Update' button.
4. Choose the required default template (new template) and press on the 'Set as Default' button.
5. Choose the 'Set as Default for all BP' option.
Other terms
Print Layout Designer, Default Template, Set as Default for All Users,
Set as Default for Current User, Set as Default for All BPs, Set as Default for Specific BP
        Header Data
Released On
24.02.2011 20:52:30
Release Status
Released for Customer
Component
SBO-GEN-PLD Print Layout Designer
Other Components
SBO-SH-PLD-A2 Tips and tricks for building PLD templates
Priority
Recommendations/additional info
Category
Consulting
       References
This document refers to: SAP Business One Notes
861088
Cannot set a template as default for all users
This document is referenced by:   SAP Business One Notes (1)
861088
Cannot set a template as default for all users
       Validity
Software Component
Version
SAP BUSINESS ONE
2005 A
2005 A SP01
2005 B
2007 A
2007 B
8.8
2nd note:
861088 - Cannot set a template as default for all users
Version 4 Validity: 04.08.2009 - active
Language English
Content:      Summary    |    Header Data    |    References    |    Validity
Symptom
When print previewing,the template used is not default template.
Cause
A template has been defined as default for all users, when previewing this it is not the template which has been set as default for document.
Solution
In order to change to a different default template for all users and all business partners please do the following:
a) "Set as default for specified Business Partner" and "set as default for current user"
b) Add tick for this Business Partner
c) Update by ticking again the specific Business Partner
d) Change set as default for all users and all Business Partner's
Other terms
Print Layout Designer, Default Template, All users, Set as Default template, SAP Business One
        Header Data
Released On
04.08.2009 11:28:58
Release Status
Released for Customer
Component
SBO-GEN-PLD Print Layout Designer
Other Components
SBO-SH-PLD-A1 Print Layout Designer known Issues
Priority
Recommendations/additional info
Category
Consulting
       References
This document refers to: SAP Business One Notes
993486
'Set as Default for All BPs' doesn't affect specific BP
This document is referenced by:   SAP Business One Notes (1)
993486
'Set as Default for All BPs' doesn't affect specific BP
       Validity
Software Component
Version
SAP BUSINESS ONE
2004 A
2005 A
2005 A SP01
2005 B
2007 A
2007 B
JM

Default layout for T code FAGLL03

Hi,
I have created a layout for T code FAGLL03. I want to make this layout as default layout only for me i.e user specific so that whenever I execute this T code, I get the report in that layout.
Is it possible to create user specific layout which wil be defaulted when that T code is executed.
Regards..

Hi:
Yes you can easily make default user layout that will be set as default for your own log in only. Please execute FAGLL03 ...once report is executed, set you layout as per your desire and in order to make it user default please go to Menu...Settings...save....there you will have to specif name starting with / and on the same screen you will find the user default check box . Just check and save it. Now exit from report now every time you will execute the report you will get the customized layout you saved.
Regards

Clarifications about Query Builder and Additional Default Layout in Reports 6i

1) Is Query Builder re-entrant in Reports 6i? If yes, what is the method. As when I tried to re-eter, it gave me message '..... Syntax Error'.
2) IN 'ADDITIONAL Default Layout', Reports 6i does not allow group field to be
included in 'the fields to be printed' list. It allows but in next tab it omits that group field.
As a result no repeating frame for the Group is generated in the 'ADDITIONAL Default Layout'.
What is wrong?
Pl. guide.
Tariq

2) IN 'ADDITIONAL Default Layout', Reports 6i does not allow group
field to be included in 'the fields to be printed' list. It allows
but in next tab it omits that group field.
As a result no repeating frame for the Group is generated in >the 'ADDITIONAL Default Layout'. Not sure I fully understand the question but you seem to be saying that if you select a field in the ADL tool, it doesn't show up in the layout. This can only happen if you select a field in the "Fields" tab from a group you haven't selected in the "Groups" tab.
Ideally Reports shouldn't show these fields since you haven't selected the groups. Unfortunately it does and you need to ensure all the appropriate groups have been selected in the "Groups" tab.
At least it will tell you if you have selected a group but haven't selected any fields for the group or if you haven't selected enough groups for the type of layout you're trying to create.

Seting up a default layout ?

how to setup a default layout in reports ?? i dont see an option or a button for that.
i guess it was available in forms 2.0
but now it isnt there.
there is only a report wizard.
but otherwise is there anyway to do it?

In the layout painter there is an "report block" which, I think, was previously called "additional default layout" that provides the same functionality as with 2.0 etc. Of course you can also manually create your required frames, fields, boilerplate, etc.
If you only have a single query then it looks the same as the "Report Wizard". If you have multiple queries then it looks closer to the dialog available in 2.0.

Create a Global Layout for Embargo Report

Hi,
Kindly advise on the below.
I am attempting to create a Global Layout for the "Export Embargo Report for BP" .
However, while attempting to save the same , the "user-specific" checkbox is turned on and grayed out.
Kindly advise on how to go about to save a Global Layout.
Thanks
Jasmit

Thanks Sameer , your understanding is correct.
However, even if I save the layout as a default one ( Default checkbox set) , it will be applicable only for my id.. I am looking to create a layout, which everyone will be able to access the layout as well..
Thanks
Jasmit Kohli

Xml forms not rendered in default layout set - urgent

Hi guys,
I've to display several properties and to provide the rating and feedback service in conjunction with xml forms because a "NewsRenderer" doesn't support the display of additional properties.
So I tried to use one of the default layout sets (e.g. "Consumer Explorer") but the <b>xml forms are not rendered after selecting the "contentLink"</b> (displays raw content of xml document). I'm looking quite a long for a command that opens and renders the xml forms in a new window - without any success...
Please help! TIA
Regards
Joerg

hi,
you have to create a XMLForms Repository Filter. Check this link:
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/21/8df33eef091f39e10000000a114084/frameset.htm">XMLForms Repository Filter</a>

Unable to set default layout variant in POWL

Hi Experts
We have performed below activity in POWL_QUERY to assign default layout variant.
1. Choose Layout variant.
2. A browser window for the POWL_MASTER_QUERY appears.
3. Change the sap-config-mode from "X" to "config" within the URL.
4. Now you can define your layout variant and save your changes.
5. Log on to the Customizing client and start transaction POWL_QUERY.
6. Assign your created layout variant in the Layout selection field.
But Still I am not able to see selected layout.
I am using NWBC 4.0 and NW - 7.02.
Please advice.
Regards,
Yogesh

Hi!
          We have same problem!
         The layout can be selected in application, but it is not taken as default.
     We appreciate your feedback
Best Regards.
Angelica

Modifying additional Layout destroys teh original default layout-Why?

Reports 6i in c/s.
I create a layout, customize it and save it.
Then I crate an Additional Default Layout. OK so far.
Now I want to re-enter in Additional Default Layout and modify it slightly thru wizard.
It destroys my previous original default layout.
Is there any way to avoid it?
Pl. guide.
Tariq

Hi Tariq,
The "Additional Default Layout" wizard isn't re-entrant. It is for adding various layouts to the layout painter but not modify an existing layout.
In addition, the Reports Wizard removes any objects from the layout section that you are defaulting into. Therefore, if you have added an additional layout and then run the Reports Wizard it will overwrite the current layout in that section.
The Reports Wizard gives you a starting point from which to develop your report. If you want to go beyond the options available in the wizard, you will need to use the live pre-viewer and layout painter.
Robin.

Default Layout Variant using LIST Display FM

Hello All,
I'm using the FM REUSE_ALV_LIST_DISPLAYin my Report.
I want to save the layout Variant as a Default Layout Variant .
But when I'm clicking the option for saving a Layout I'm getting only one check box for User Specific Layout.
How can I set a layout created variant as a DEFAULT Layout Variant ?
Regards,
Deepu.K

Hi,
Once List is displayed, use the path: Setting->Layout>Layout Management->Click the check box against the layout which you want to set as the default. Then click on Define Default settings, first icon. You can follow the above instructions after running one of the DEMO pgms viz. BALVSD01.
I hope this helps,
Regards
Raju Chitale

Default Layout Variant

Hi Friends,
What is a default layout variant? How to create one?
Thanks in advance.
Tamilarasan

hi, something additional to Raja input.
you can load a layout for ALV in programing way.
the ALV variant be stored in table V_LTDX, you can select out the variant record from it. So you can call the ALV with some difference, code like following:
DATA: L_LAYOUT TYPE DISVARIANT.
L_LAYOUT-REPORT = SY-REPID.
L_LAYOUT-USERNAME = XXXX. "user name
L_LAYOUT-VARIANT = XXXX. "the variant name you saved
CALL METHOD GO_GRID->SET_TABLE_FOR_FIRST_DISPLAY
EXPORTING I_STRUCTURE_NAME = 'SFLIGHT'
IS_VARIANT = L_LAYOUT
Then the ALV will be display as the layout you want, without special choose.
Hope it will be helpful.
thanks a lot

Create a default layout

Similar Messages

Maybe you are looking for