Create a flat file source in Designer in DIM

I am trying to create a flat file source in Designer in DIM from Workflow Manager, select Tools > Designer.However , I am unable to see the Planning folder therein to open. Can anyone help me in this respect.Plz help - very urgent.
Thanks in advance
Manisha

Hello,
http://help.sap.com/saphelp_nw70/helpdata/en/43/01ed2fe3811a77e10000000a422035/content.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/80/1a6581e07211d2acb80000e829fbfe/frameset.htm
steps:
create source system file (if you haven't)
- create ods
- create update rules for ods and activate
- create infosource
- assign infosource with datasource (source system file)
- maintain transfer rules - maintain infoobject in sequence as flat file to transfer structure. map infoobject in transfer rules. activate transfer rules
- create update rules ods-infosource and activate
- create infopackage, specify external data path (recommended file put in application server)
hope this helps.
Regards,

Similar Messages

Create a flat file source in Designer in DIM from Workflow Manager

I am trying to create a flat file source in Designer in DIM from Workflow Manager.However , I am unable to see the Planning folder therein to open. Can anyone help me in this respect.Plz help - very urgent.
Thanks in advance

Hello,
http://help.sap.com/saphelp_nw70/helpdata/en/43/01ed2fe3811a77e10000000a422035/content.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/80/1a6581e07211d2acb80000e829fbfe/frameset.htm
steps:
create source system file (if you haven't)
- create ods
- create update rules for ods and activate
- create infosource
- assign infosource with datasource (source system file)
- maintain transfer rules - maintain infoobject in sequence as flat file to transfer structure. map infoobject in transfer rules. activate transfer rules
- create update rules ods-infosource and activate
- create infopackage, specify external data path (recommended file put in application server)
hope this helps.
Regards,

Need to create a flat file source system in bi?

Hi all,
i need to load the data from a flat file to an ods? can anyone pls tell me the steps to create the flat file source system in bi?
Thanks

Hello,
http://help.sap.com/saphelp_nw70/helpdata/en/43/01ed2fe3811a77e10000000a422035/content.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/80/1a6581e07211d2acb80000e829fbfe/frameset.htm
steps:
create source system file (if you haven't)
- create ods
- create update rules for ods and activate
- create infosource
- assign infosource with datasource (source system file)
- maintain transfer rules - maintain infoobject in sequence as flat file to transfer structure. map infoobject in transfer rules. activate transfer rules
- create update rules ods-infosource and activate
- create infopackage, specify external data path (recommended file put in application server)
hope this helps.
Regards,

Creating Flat File Source System in BI

Hi,
How can I create a flat file source system in BI???

Hi,
Here are the steps...
1. Go to RSA1.
2. Click on Source Systems.
3. In the right pane, right click on Source Systems and say "Create".
4. Then choose the option of "FlatFile" from the available options.
5. Give the name to Source system.
Hope this helps.
Regards,
Yogesh.

FM to create a flat file in given IDOC type format

Hi,
I need to create a flat file having IDOC format.
I have data in some other source file.
Which function module can be used for the same?
Could you pls provide some sample code?
Appreciate the help.
Thanks.
-Shreyas

My Exact requirement is:
I have some data in a source file.
Now I want to create a flat file while which should be in a standard IDOC format(WMMBID02) so that I can process it later using IDOC processing say EDI_DATA_INCOMING or any appropriate FM which will process IDOC later.
I dont want IDOC to be created in the system right now. I just need to reformat my source file into a standard IDOC format flat file.

SSIS Flat File Source not populating varchar column

I have SSIS package that imports flat files with column separator | from "Flat File Source" into the database trough "OLE DB Destination".
For one of the columns (file contains UIDs in curly brackets) destination column is varchar(250) null-able, when "Retain nulls" is set to true complete data have been imported, but when "Retain nulls" is set to false beside fact that in
the file data is not null and it is not empty string it is not imported and in the destination column is empty string.
I know that this "Retain nulls" applies to the columns that contains NULLs but this is not the case.
If someone have experience with such issue please help.
Thank you in advance.

From your statement it looks like when you have curly brackets it skips the value and inserts nulls instead. And that may be the reason why its working fine when you change retain null value.
I would suggest
Make your setting "retain null" to true and load the flat file, then check what happens to the values having curly braces (is there any value or null) , if there is value we need to check for that(please share a sample file). And if it having null
instead of "{value}", I would suggest to put a script task to remove { from your flat file and then try load the data.
Hope this helps.
Regards, -Amit

Create a flat file with multiple characters for enclosures

Hello,
we use OWB 11g2 (11.2.02).
Now we try to create a flat file with multiple characters for enclosures. The manual wrote:
"Enclosures (Left and Right): Some delimited files contain enclosures that denote text strings within a field. If the file contains enclosures, enter an enclosure character in the text box or select one from the list. The list displays commonenclosures. However, you may enter any character. The default for both the left and right enclosure is the double quotation mark ("). You can specify multiple characters and hexadecimal characters as field enclosures."
But it will not work. The OWB use the first character from the left enclosure definition as left enclosure and the second one as right enclosure !?!
Did anyone know this behavior? Is there a solution for this problem?
Thanks and regards
Norbert

HI Raghu,
Use the function module 'GUI_UPLOAD'.
In that you have to specify the field_separator value = 'X' in export section.
Regards,
S.C.K

How to Create a Flat File using FTP/File Adapter

Can any body done workaround on creating the Flat file using FTP/File Adapter?.
I need to create a simple FlatFile either using of delimiter/Fixed length. using the above said adapters we can create XML file, i tried concatinating all the values into a single String and writing into a file, but it does not have proper structure
Can any body help me out on this..
Thanks
Ram

You can create a text schema while creating a File Adapter. If schema is specified for File Adapter, it takes care of converting XML into fixed length or delimited format.
Thanks,
-Ng.

Creating DataSources for File Source Systems in csv format in sap bw 7.0

Hi,
Please explain how to Create DataSources for File Source Systems in csv format in sap bw 7.0. WITH SCREENSHOTS
Thanks
JINI
Edited by: Jini Jayan on Jun 11, 2008 11:36 AM

Step 1. Select Source systems under Modelling in the left panel. In the right panel, right-click Source systems and select Createu2026.
Step 2. Select the FileSystem, manual meta data, data using file inte option, and then click to continue.
Step 3. Enter a name and a description for the source system, and then click to create the source system.
Now create an application component
Step 1. Select InfoSources under Modelling in the left panel. In the right panel, right-click InfoSources and select Create application componentu2026.
Step 2. Enter a name and a description for the application component, and then click to continue. (BW automatically adds a prefix of "Z" to the technical names of application components, unlike the naming system used for other BW objects.If u give the name as AC_DEMO it will be saved as ZAC_DEMO in the system.
Now create infosource
Step 1.Select InfoSources under Modelling in the left panel. Right-click the newly created Application Component , and then select Create InfoSourceu2026.
Step 2. Select the option Master data/texts/hierarchies, and then click to continue.
Step 3. Enter your infoobject name, and then click to continue.
Now you will be asked
Infosource(name) assigned to Appln component(name)?
Click continue
Now go back to workbench and see the Infoobject listed under the Application component name (under Infosource)
Right click the infoobject name and select Assign Datasource
Enter the Infoobject name as Infosource name and the source system name and continue
Now you ll get datasource assignment confirmations for Infosource_ATTR and Infosource_TEXT for master data and text.
Click yes and continue
Now you ll be taken to the Infosource(master data) change screen
Source system name will be given
Below that u need to give the datasource name u2026.._ATTR
Click Activate.
Now Click the tab transfer rules
Copy the communication str infoobject names to an excel sheet
For ex if your infoobj are IO_MATNUM and IO_MATNAME (material number and material name) copy and paste as
IO_MATNUM      IO_MATNAME
MAT001     TEA
MAT002     COFFEE
MAT003     SUGAR
GIVE YOUR DATA IN THE EXCEL. AND CLICK File Save As CSV(comma delimited) and save to ur system. Give file name as something like infosourcename_ATTR.csv
Now back to the Infosourcechange screen
Source system name will be given
Below that u need to give the datasource name u2026.._TEXT
And activate
Now Click the tab transfer rules
Copy the communication str infoobject names to an excel sheet
GIVE YOUR DATA IN THE EXCEL. AND CLICK File Save As CSV(comma delimited) and save to ur system. Give file name as something like infosourcename_TEXT.csv
Now create Infoobject to load data
Go to Infosourceu2014Appln Componentu2014InfoObju2014SourceSystemu2014rightclick->create Infopackage
Step 2. Select the DataSource Material number (Master data), enter a description for the InfoPackage, and then click to continue.
Give infopackage description as Infopackage:InfoObj_ATTR
Now take care to select the first item in datasource and click continue
In the next screen click external data tab
Click client workstation
Datafileu2026.file name (browse to give the file u saved in ur system)
There will be an option to remove header data from file.remove 1 row.
File typeu2014csv file
Now click schedule tabu2014start dataload immediatelyu2014start.
In the same way
Go to Infosourceu2014Appln Componentu2014InfoObju2014SourceSystemu2014rightclick->create Infopackage
Step 2. Select the DataSource Material number (text)enter a description for the InfoPackage, and then click to continue.
Give infopackage description as Infopackage:InfoObj_TEXT
Now take care to select the second item in datasource and click continue
In the next screen click external data tab
Click client workstation
Datafileu2026.file name (browse to give the file u saved in ur system)
There will be an option to remove header data from file.remove 1 row.
File typeu2014csv file
Now click schedule tabu2014start dataload immediatelyu2014start.
Click the icon below admn workbench to go to monitor and check the load
Or you go back to Infosourceu2014Appln Componentu2014InfoObju2014right clickmaintain master data
Click execute
You can see the data load
Hope this helps!!!

Create a Flat File like text_io in forms6i

Hello,
how i create a flat file (to download or in files system) via apex, like I did in oracle forms using text_io, for example
employees.txt
Name Last Name Salary
Fernando Medina 5000.00
thanks in advance
regard
Edited by: Fdomedina on Mar 11, 2010 5:00 AM

Now you have to do it from the database using the UTL_FILE package.
Or (if it is a report) download it as CSV file, so you can open it in Excel.

Creating a flat file in the IDOC format

Hi everybody,
Need help.....urgently. Can somebody please tell me how to create a flat file in the IDOC format? I am creating a bill of lading/Documentary payments (EDI 858) and can't figure out a way to write the data generate through the report in a flat file in IDOC format. My deadline is right around the corner and I need help.
Thanks,
M

Hi Minal,
I still don't understand your question.
So, you have a report which selects data and puts it into an internal table. This part looks fine.
You want to create a flat file? Ok, to create a flat file on the application server then use the commands OPEN DATASET, TRANSFER, and CLOSE DATASET. To create a flat file on the presentation server then use the FM GUI_DOWNLOAD (or the GUI class, I forgets its name for the moment).
In both cases you should build up an internal table which has the exact structure required for your (EDIFACT?) EDI message, and then use the appropriate method to write the file.
If the following steps are manual then there is nothing more for you to do.
I don't see any need to use Idoc technology, or make any reference to it in your solution.
I hope that helps. If not, please be more specific when asking your questions.
Brad

[Flat File Source [2]] Error: Cannot open the datafile "VendorPurchases20050512.txt".

hi
I'm trying to use foreachloop container in order to read the data that i have in several txt files and upload it into MRR table.
when i'm trying to run the package, i'm getting the following error:
[Flat File Source [2]] Warning: The system cannot find the file specified.
[Flat File Source [2]] Error: Cannot open the datafile "VendorPurchases20050512.txt".
[SSIS.Pipeline] Error: Flat File Source failed the pre-execute phase and returned error code 0xC020200E.
I don't know what's the problem since it was working before.In the flat file connection manager i defined all the path including the name of the file.
I'll be happy for assistance
thanks
Yaron

Hi Yaron,
Does the file stored in local file system or a share folder on remote server? If you can load data from a file in local computer, but cannot load data from a file in a remote computer, the issue may be caused by the Kerberos authentication. In this condition,
check the following points:
Enable SQL Server for Kerberos
Check delegation settings for SQL Server service account and Computer
Add Host SPNs for FileShare Server and SQL Server
References:
http://msdn.microsoft.com/en-us/library/dd568720.aspx
http://msdn.microsoft.com/en-us/library/ms191153.aspx
Regards,
Mike Yin
TechNet Community Support

Data flow from Flat file Source to OLEDB Destination

Hi All
I have Flat file Source data I am trying to Import OLEDB Destination so I am getting below
Whis Is Error I am getting at Flat File Source
[SSIS.Pipeline] Error: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on Flat File Source returned error code 0xC0202091. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure
code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
Can you please help Me I will Grateful to you Friends.

0
[Flat File Source [2]] Error: Data conversion failed. The data conversion for column "LongName" returned status value 4 and status text "Text was truncated or one or more characters had no match in the target code page."
[Flat File Source [2]] Error: The "Flat File Source.Outputs[Flat File Source Output].Columns[LongName]" failed because truncation occurred, and the truncation row disposition on "Flat File Source.Outputs[Flat File Source Output].Columns[LongName]" specifies
failure on truncation. A truncation error occurred on the specified object of the specified component.
Which Is error I have got Thanq for your time & let me know
Hi Visakh16 this is Complete error I have got

Create a flat-file upload for a BO XAI Inbound Service?

Hello all,
If we don't have a schema defined for a BO XAI Inbound Service, how can we create the XSL and the flat-file upload schema file for it.
Any advice?
Regards,
Kerr

I don't have problem to create the XSLT mapping.
But because it is to create a flat-file upload for a Business Object XAI Inbound Service, it doesn't have a schema on the server as to the thread Create Schema for Business Object to use for XAI Inbound Service?
And I can't create that flat-file upload without a schema on the server.
Or I can use the BO XAI Inbound Service WSDL instead to create the mapping for the flat-file upload.
Regards,
Kerr

How to create a flat files and how i used this

hi Guys and gals,
I am david. I want to know how to create a flat files. I don't know about it also. pls explain it and also pls help me to create a flat files. If u have any program for creating pls send me.
I want to know about retrive the datas from flat files and also insert a record into it.
pls guide me
i need this immediately
david

void newMethod() throws Exception {
     // Reading from a flat file
     String data;
     BufferedReader br = new BufferedReader(new FileReader("c:\filename1.txt"));
     while ((data = br.readLine()) != null) {
          System.out.println(data);
     // Writing to a flat file
     BufferedWriter bw = new BufferedWriter(new FileWriter("c:\filename2.txt"));
     bw.write("sample data");
     // After writing the data close the file
     bw.close();
}

Create a flat file source in Designer in DIM

Similar Messages

Maybe you are looking for