Create a framework contract of value without items

Hi everyone,
I need to create a framework contract of value without items.
Afterwards, I need to create a purchase order with refrence to this framework contract.
I am looking for information but I haven't found anything about it.
Please, could you help me?
Regards,
ARGPES

Hi Aktp/ Abhi;
Thank you very much for your answer.
I know, I may use the Item category "M" (for similar materials with same price but different material numbers) and the Item category "W" (for materials belonging to the same material group but with different price)
I am looking for another possibility (create a framework contract of value without items), because this contract will be created in a noSAP application, afterwards this contract will be copied in SAP by an SAP tool.
Regards

Similar Messages

Contract Version not created when WK Contract (target value) is changed.

Hi there,
Problem with the Version Management on a WK Contract.
When we change the contract targ. value on some of our contracts the new version is not created accordingly. This is only on some of our contracts
Version Mgmnt is correctly configured and the release strategy in place to be triggered when the target value changes. It does work correctly for some contracts.
We receive the following message when we change the targ. value:
"No new version created because a message has not yet been transferred"= Message 027
Can anyone help or advise?
Many thx.

We receive the message on some of the contracts.
Therefore it can't be due to the output

How create to master contracts for each new sold to party

Hey SAP geeks,
I have a scenario, in which I need to create a maitenance contract based on support items in a billing document. The system should create a master contract for a particular sold to party if that sold to party has ordered support for the first time.(system should first search whether any master contracts exist for this particualr sold to and then create one if there arent any already created.) After the master contract is automatically created ,the system should create maintenance contracts based upon the support items in the billing document and then assign this contract to the master contract for that particualr sold to party. Is this possible? Can you tell me how we can do this? Points will be awarded. I guess this requires lot of ABAP programming. but it would be great if some help is provided.
Thanks.
Naveen

Dear Hanumant,
As per my view,,
You can use one time customer functionality to full fill your requirement.
When you create sales order with one time customer system take you to the customer data maintanence screen through that you can maintain the one time customer data.
Same one time customer number you can use for every new order through maintaining different data.
I hope this will help you,
Regards,
Murali.
Edited by: Murali Mohan.Tallapaneni on Dec 19, 2008 6:08 AM

Framework contracts

Hi,
I have a question regarding the creation of open orders. If you create a framework contract for an open request associated with registration info, does it request may also be associated with a release strategy?
If so, I have a problem and which are not allocated for release strategies open orders associated with registration info.
A greeting and thanks.

You can get the information By linking EKKO and EKPO.
You will get list of FO in EKKO document enter those results in EKPO you will get FO against contracts.

Contract Release value is not updated with Limit item value

We have SRM 4.0 with ECS scenario.
Contract are created in SRM and replicated to ERP.
If we create PO with Service line and Limit line using contract in both of these line items, contract Release value is getting updated only with Service line item value.
But the contract Total value is the addition of Service and Limit value of PO.
Why Contract Release value is not getting updated with Limit item value. Please help as early as possible.

Hi Sandeep
Yes. there are various reasons .upon your contract incorrect status and linkage not establised / or more attachment in SRM GOA.
what type of contract are you using? GOA or CCTR
If it is GOA - which version of SRM and service pack ?are you in ?
If it is a GOA , BLAREL idoc might failed to post the release value in the SRM .
How contracts are created material / mat group ?
to fix or understand the issue, you need to recreate the issue.
what is the ERROR in BLAREL in SRM idoc monitoring ?

SLA for service request\service order without create a service contract

Hello Experts,
We are using CRM 7
Is there a possibility to determine SLA for service request\service order without create a service contract?
We have defined:
1. Trasaction Code: CRMD_SERV_SLA- Response Profile / Response Times
2. In Customizing we have defined our date profile with the relevant duration
3. In Customizing for transaction types we defined SLA Prof. Det. Proc= IT000001
4. we assign the Service Profile and Response Profile to BP (from "service levels" block) .
Everthing seems ok but the SLA time is not determined automatically.
Hope you can help me out.
Thanks,
Tal

Hi Tal Tal
Your steps are correct and i hope you did these too
a) In the SLA determination procedure ,you have defined the access sequence for service product item or org
b) If service product item ,take any service product for ex INVESTIGATION assign the two Service and response profile in the service tab
c) if org the above two profiles can be assigned to org attributes.
d) In my opinion the date profile you should have assigned it to item category as I think the SLA date calculation is done at the item level
e) You should assign the SLA det prof to the transaction type in the service process business category - customizing header.
f) when you create a transaction type sla dates will be determined as follows
    a) you have to enter service product entered in the item ,then dates will be visible,and also if your access sequence is based on service product,the respons profile and service profile will be determined.
    b) if you have given indicators as all these three "category,priority,codes' in your response profile, then you have to enter all three and then hit enter
   c) After hitting enter,the response profile determined above,will use the above 3 inputs of category,priority etc and determine the duration times ,which should be maintained in your date profile.hence the durations determined will be used in the dates calculation.
Let me know if you have any other questions.

Contract net value problem

Hi,
I created a material PO for net value 100 eur for a contract
of target VALUE 1000 eur.Now i create a GR for
that PO for 50 EUR.Now i set the delivery completed
indicator,then i can set contract net value gets updated to 50 EUR.
Now i created a service contract and service PO with
same target value and net value
But in the case of service po,i create a service entry sheet for 50 EUR,then contract net value is not getting updated to 50 EUR.
Why it behaves differently for material and service POs?

I have Simulated your issue..
I have Created a Service Contract with Line Item 'D" for 1000 INR.
Later I have raised release Order for 200 INR..
as soon as the Release Order was approved , the Net Value in Contract updated to " 200 INR"..
Still SES is pending for that...
If you want I can send you screen shot...

Contract Release Value is not updated with Confirmation or Invoice value

The release value for a contract in SRM EBP shows the value of purchase orders created using that contract. It does not take into account confirmation and/or invoice values.
For example I create a PO for 10 items at £100/each using Contract ABC. The total value of the PO is £1000 and the release value contract ABC would be £1000. If I then only confirm and invoice 5 items (£500) for the PO, the release value of contract ABC stays at £1000 even though I would expect it to update to £500
Therefore the release value of the contract could be incorrectly overstated if purchase orders are created against the contract but not actually invoiced/confirmed for their total value.
Please could you confirm the correct functionality and how I could find out the the true invoice value of purchases made using a contract?

Hi
Which SRM and R/3 versions are you using ?
Meanwhile, please go through the following SAP OSS Notes, which will help in this case ->
Note 622045 Net value in release overview of contract is incorrect
Note 493519 Release quantities are not updated
Note 1108322 BBP_CONTRACT_CHECK wrong calculation of values
Note 1102886 Contracts: Lesser Field length for Target Value
Note 1082548 Check of Released quantity and released value in contract
Note 656181 Release synchronization of releases on services
Note 874920 Currency not allowed to be changed for a 'Released' Contract
Note 703771 Resetting release values during purchase order item deletion
Note 643823 BLAREL: Incorrect values in service segment
Note 519879 BBP_CTR_MAIN: No message when values in Contract are reset
Note 520734 Target value not converted if currency is changed
Note 528897 Documents not displayed in contract release order overview
Note 430373 BBP_CON_MNT: No releases available
Note 491993 Entry of contracts with target values
Note 437491 Purchase contract: Incorrect update of the call-off values
Note 406799 BBP_CON_MNT: Fields after contract release ready for input
Note 398168 Purchase contract: Target value is not changed
Do let me know.
Regards
- Atul

Ibase and configuration error while creating a Service Contract

Hi,
I am creating a Service Contract programatically and not manually through the T-code CRMD_ORDER.
I am using the Function module CRMXIF_ORDER_SAVE for the same as the FM BAPI_BUSPROCESSND_CREATEMULTI and CRM_ORDER_MAINTAIN did not work for me because of the number of parameters that needs to be passed for creating the Service contract.
The Service contract does get created but there are errors corresponding to the Point of delivery and configuration missing.
The error corresponding to the point of delivery says "IS-U:allocate a point of delivery to the item" even though I am passing the values in the REF_OBJECTS field of the CRMXIF_BUSTRANS_ITEM structure.
Structure for the same is :
ls_objects_i-TYPE_REF_OBJ = 'B'.
ls_objects_i-object_task = 'I'.
ls_objects_i-PRODUCT_GUID = lv_product_guid.
ls_objects_i-PRODUCT_ID = p_product_id.
ls_objects_i-IBASE_COMP_GUID = ls_output-IBASE_GUID.
ls_objects_i-IB_INSTANCE = 1582.
ls_objects_i-IB_COMP_VALID = '20070926093651'.
ls_objects_i-SERIAL_NUMBER = '0102 46CC9C278B92025BE10000000AD5920E'.
append ls_objects_i to lt_objects_i.
p_ls_item-REF_OBJECT-data = lt_objects_i.
p_ls_item-REF_OBJECT-datax = 'X'.
Similarly,the error for the configuration says "Configuration for the item missing" and here again I am passing the values in the CONFIGURATION structure.
Structure for this is :
p_ls_item-configuration-data-consist = 'T'.
p_ls_item-configuration-data-kbname = 32.
p_ls_item-configuration-data-kbvers = '0.0'.
p_ls_item-configuration-data-kbprofile = 'E_H_B'.
p_ls_item-configuration-data-complete = 'T'.
p_ls_item-configuration-data-spras = 'E'.
p_ls_item-configuration-data-cfginfo = 'VCOND=VARIANT_CONDITION_KEY'
ls_cuins-OBJ_TYPE = 'SERV'.
ls_cuins-class_type = 300.
ls_cuins-obj_key = 'E_H_B'.
ls_cuins-obj_txt = 'E_H_B'.
ls_cuins-QUANTITY = '1.0'.
ls_cuins-COMPLETE = 'T'.
ls_cuins-CONSIST = 'T'.
append ls_cuins to lt_cuins.
ls_config_i-instance = lt_cuins.
p_ls_item-configuration-data = ls_config_i.
p_ls_item-configuration-datax = 'X'.
clear ls_config_i.
ls_cuval-charc = 'DISCOUNT_EUR'.
ls_cuval-charc_txt = 'DISCOUNT_EUR'.
ls_cuval-value = '0.0'.
ls_cuval-value_txt
append ls_cuval to lt_cuval.
ls_instance-value = lt_cuval.
insert ls_instance into table lt_instance.
ls_config_i-instance = lt_instance.
p_ls_item-configuration-data = ls_config_i.
p_ls_item-configuration-datax = 'X'.
clear ls_config_i.
Kindly help if anyone has worked on this.......
Regards,
Puneet Jhari.

Hi,
I am creating a Service Contract programatically and not manually through the T-code CRMD_ORDER.
I am using the Function module CRMXIF_ORDER_SAVE for the same as the FM BAPI_BUSPROCESSND_CREATEMULTI and CRM_ORDER_MAINTAIN did not work for me because of the number of parameters that needs to be passed for creating the Service contract.
The Service contract does get created but there are errors corresponding to the Point of delivery and configuration missing.
The error corresponding to the point of delivery says "IS-U:allocate a point of delivery to the item" even though I am passing the values in the REF_OBJECTS field of the CRMXIF_BUSTRANS_ITEM structure.
Structure for the same is :
ls_objects_i-TYPE_REF_OBJ = 'B'.
ls_objects_i-object_task = 'I'.
ls_objects_i-PRODUCT_GUID = lv_product_guid.
ls_objects_i-PRODUCT_ID = p_product_id.
ls_objects_i-IBASE_COMP_GUID = ls_output-IBASE_GUID.
ls_objects_i-IB_INSTANCE = 1582.
ls_objects_i-IB_COMP_VALID = '20070926093651'.
ls_objects_i-SERIAL_NUMBER = '0102 46CC9C278B92025BE10000000AD5920E'.
append ls_objects_i to lt_objects_i.
p_ls_item-REF_OBJECT-data = lt_objects_i.
p_ls_item-REF_OBJECT-datax = 'X'.
Similarly,the error for the configuration says "Configuration for the item missing" and here again I am passing the values in the CONFIGURATION structure.
Structure for this is :
p_ls_item-configuration-data-consist = 'T'.
p_ls_item-configuration-data-kbname = 32.
p_ls_item-configuration-data-kbvers = '0.0'.
p_ls_item-configuration-data-kbprofile = 'E_H_B'.
p_ls_item-configuration-data-complete = 'T'.
p_ls_item-configuration-data-spras = 'E'.
p_ls_item-configuration-data-cfginfo = 'VCOND=VARIANT_CONDITION_KEY'
ls_cuins-OBJ_TYPE = 'SERV'.
ls_cuins-class_type = 300.
ls_cuins-obj_key = 'E_H_B'.
ls_cuins-obj_txt = 'E_H_B'.
ls_cuins-QUANTITY = '1.0'.
ls_cuins-COMPLETE = 'T'.
ls_cuins-CONSIST = 'T'.
append ls_cuins to lt_cuins.
ls_config_i-instance = lt_cuins.
p_ls_item-configuration-data = ls_config_i.
p_ls_item-configuration-datax = 'X'.
clear ls_config_i.
ls_cuval-charc = 'DISCOUNT_EUR'.
ls_cuval-charc_txt = 'DISCOUNT_EUR'.
ls_cuval-value = '0.0'.
ls_cuval-value_txt
append ls_cuval to lt_cuval.
ls_instance-value = lt_cuval.
insert ls_instance into table lt_instance.
ls_config_i-instance = lt_instance.
p_ls_item-configuration-data = ls_config_i.
p_ls_item-configuration-datax = 'X'.
clear ls_config_i.
Kindly help if anyone has worked on this.......
Regards,
Puneet Jhari.

Service Entry sheet creation - Using a diffent contract diff from line item

Hi,
Here is the scenario...
I have a services purchase order referring to contract and its service item with services ( service masters) attached to it.
And the PO item is a limit item with some limits maintained on the limits tab, but contract reference is specified at the limits level it is only at the line item level.
System version : ECC 6.0
Lets say PO number : 123456789
Lets say contract number and item is : 2323232323 item 10 ( Account assignment U )
My supplier is : 111111111
Now I am creating the Service Entry sheet and I am trying to add the services ( services selection button) I get a pop up to search for services by certain selection criteria and one of them is purch document ( remember it doesn't pre-populate and grey out the purch doc field with that the contract number from the item level) and now I can select any service contract that belongs to any supplier and select the services from it and complete my SES.
So lets say the contract from which I chose the service is : 3232323232
And the supplier on the contract is 2222222222
Is this a valid scenario or not?
Has any body ran into this situation before?
Hope I was clear in explaining my scenario....
Thx,
Krishna.

Hi Krishna,
the External Services Management distinguishes between planned and unplanned services.
In case you have ONLY limits, no planned services in the PO item, it does not matter if you have entered a contract number into the PO item - in this case this contract will be not a real reference for your services.
If you have entered limit values only as overalllimit and expected value and you did not enter a contract limit on the contract limit tab, then you will not have a special contract reference on unplanned level neither.
In this case it is NOT an error when you start the entry sheet creation and you can select services from other contracts or purchase orders against your limit values in the PO into the entry sheet. The system does NOT check for a different vendor when you select services from other documents than the contract which you have specified in your PO item, because it is NOT a real reference - nor on services level as you have only limits in your PO item, nor on limit level since you have NOT entered a contract limit into your PO item.
In order to understand this process please study the unplanned scenario and contract reference scenarios.
Regards,
Edit

Differentiate between quantity contract and value contract?

Hi,
How can i differentiate between quantity contract and value contract?
The agreement type of contract is is not MK or WK , its custom created.
regards
N Banu

Hi
In Qty Contract you limit the total quantity of items that required for you;
It sums the partial quantities of Release Orders with the Contract as a reference.
In a Value contract, you limit the total value of items to be required when
you create Release Orders with the Contract as a reference, that is you
don't work with the quantities as in the first case, but indeed with the
quantities multiplied by the unit price you fixed in the Contract
Refer the link for details
http://www.erpdb.info/qquantity-contracts/
http://help.sap.com/saphelp_crm40/helpdata/en/d2/650e26a21fe04bba5298afd089b9dd/content.htm
Regards
Anand

How to add a Picklist/Drop down in a page with values (Without Personaliz)

hi,
i am very very new to OAF ....please help me out on the below requirement....
Please suggest me how to add a pick list/drop down field to a page, with some values. (without personalization)
And the second one is when ever i'll chose a value from the drop down the page will reload and display a message on the page.(messages are different for the different values)
Thanks
Prakash

Prakash
As mentioned by Anil you can use the above link for new poplist generation through extension. As far as reloading the page in that case you need to make use of PPR for that item.Do refer dev guide for more details
You can use below code for creating poplist in processRequest of your extended controller
OAMessageChoiceBean mcb = (OAMessageChoiceBean) createWebBean(pageContext, MESSAGE_CHOICE_BEAN);
mcb.setPickListViewUsageName("TestVO");
mcb.setListValueAttribute("LookupCode");
mcb.setListDisplayAttribute("Meaning" );
mcb.setID("test");
mcib.setFireActionForSubmit ("event1",null,null,false, false);//This is event that cause reload of pageYou can handle the event in pfr method
if("event1".equals(pageContext.getParameter("event")))
}Thanks
AJ

Framework contract/order for Services

Dear All
Can I make a Framework Contract(Services) and then corresponding Framework PO doc type FO so that I can do MIRO directly for Framewrof PO without GRN.
Also is it possible that I make a framework contract for services and directly do MIRO against the contract without creating framework PO??
Regards
SK

Hi Satish,
The Note 175510 should clarify this for you:
"The combination:
GR: set
GR-non-val: not set
IR: set
GR-based IV: not set
is not supported by SAP in this connection.
Regards,
Purnima.

How to realize the scenario of Inclusive Free Goods without Item Generation

I include the condition type NRAB in my pricing procedure, but it shows me that this condition ignored(requirement 059 not fulfilled).
why?

Hi,
Prerequisites
In the free goods master record in the Free goods category field, select free goods category 3 (inclusive free goods without item generation).
Follow the foll. procedure:
In free goods master data maintenance, this new free goods type is dealt with in the same way as the inclusive free goods procedure described above.
In order processing, you can not create order sub-items.
For pricing in the main item, you need to create a discount. The standard system provides pricing procedure RVAA01 and condition type NRAB.
Condition type NRAV is set up as follows:
It does not determine a discount from a condition record. It uses condition basis formula 029 in the pricing procedure to determine a discount from the free goods factor.
The condition receives the new pricing requirement 059 in the pricing procedure. This requirement checks whether free goods have already been determined.
The condition type receives condition category f. This condition category ensures that the condition is redetermined every time the quantity is changed, since this can also mean a change to the free goods quantity.
regards,
Siddharth.

How to get column values on item added event receiver

Hi,
I have two columns in a document library and one is people or group column and the other one is choice column with check boxes.
I want to know how to read column values on Item Added event receiver, so that I can create if statements based on those values.
Thank you,
AA.

Hi AOK2013,
Have you had a look at this Microsoft tutorial: http://msdn.microsoft.com/en-us/library/office/gg981880(v=office.14).aspx
Essentially, you want to use the AfterProperties property to access the changed field value.
E.g.
var personvalue = properties.AfterProperties["YourPersonFieldName"]
Regards, Matthew
MCPD | MCITP
My Blog
View
Matthew Yarlett's profile
See my webpart on the TechNet Gallery that allows administrative users to upload, crop and format user profile photos. Check it out here:
Upload and Crop User Profile Photos

Create a framework contract of value without items

Similar Messages

Maybe you are looking for