Create a Global Layout for Embargo Report

Hi,
Kindly advise on the below.
I am attempting to create a Global Layout for the "Export Embargo Report for BP" .
However, while attempting to save the same , the "user-specific" checkbox is turned on and grayed out.
Kindly advise on how to go about to save a Global Layout.
Thanks
Jasmit

Thanks Sameer , your understanding is correct.
However, even if I save the layout as a default one ( Default checkbox set) , it will be applicable only for my id.. I am looking to create a layout, which everyone will be able to access the layout as well..
Thanks
Jasmit Kohli

Similar Messages

Global ALV Layouts for Costing report

For T code S_P99_41000111 ie Analyse / compare material cost estimate , I want to create a global ALV layout .
When I am trying to create the layout option for user specific layout comes with tick greyed out .System does not allow to remove the tick so that I can create global layout .
With this option I cannot create a Global layout .
Can anybody help me with this so that I can create global layout .
I checked with security team & they gave me SAP_ALL authrisation but still it does not work .
Is it that SAP has allowed only user specific layouts for this T code S_P99_41000111 ie Analyse / compare material cost estimate .
Or is this authorisation issue .
Thanks
Manoj

Hi Manoj,
Have you already tried configuration transaction OKN0? There is a
field called 'shared' in Layout Visibility. Do an F1 over this field for more info.
Regards,Declan

Error while creating a new layout in a report.

I am getting this error message:
Failed to save data.
Error occurred when creating xml data.
when I try to save after I create a new layout in my report.
Is there some common problem with templates that could cause this to happen?
I'll continue to look around for an answer but if anyone would like to see the template and a sample set of XML data so they can help me figure out what the problem is, that would be swell.
-Nevermind. The problem seems to have dissapeared. Apparently the appropriate order of operations is
1: Create new layout.
2: Upload RTF Template
Please feel free to delete this post -.-

i am also getting the same error here and i have followed what you laid out, i am still getting the same error.
Thanks

How to get the spool id or how to create a spool id for the report .

hi,
how to get the spool id or how to create a spool id for the report .
this spool id i have to use it in CONVERT_ABAPSPOOLJOB_2_PDF fm to get the pdf download file.
my requirement is to download a pdf file from the alv grid list.

Hi Raghu,
Execute this program.
REPORT ZTEST_3318                              .
tables: usr01.
perform send_report_to_spool.
*&      Form send_report_to_spool
      text
form send_report_to_spool.
data: loc_dest like pri_params-pdest,
        wf_listname type char12,
        wf_listtext like PRI_PARAMS-PRTXT,
        wf_copies type i,
        wf_days type i,
        wf_PARAMS LIKE PRI_PARAMS,     " achieving file PRI_PARAMS.
        wf_valid type c.
clear : wf_listname , loc_dest , wf_listtext .
move: 'AP interface' to   wf_listname .
move: 'AP interface' to   wf_listtext .
select single spld into usr01-spld from usr01 where bname eq sy-uname .
if sy-subrc eq 0 .
    move: usr01-spld to loc_dest .
endif .
call function 'GET_PRINT_PARAMETERS'
    EXPORTING
      destination    = loc_dest
      copies         = 1
      list_name      = wf_listname
      list_text      = wf_listtext
      immediately    = ' '
      release        = ' '
      new_list_id    = 'X'
      expiration     = 1
      line_size      = 200
      line_count     = 65
      layout         = 'X_65_200'
      sap_cover_page = 'X'
      receiver       = 'SAP*'
      department     = ''
      no_dialog      = 'X'
    IMPORTING
      out_parameters = wf_params
      valid          = wf_valid.
if wf_valid <> space.
    new-page print on parameters wf_params no dialog.
    perform write_summary .
    new-page print off.
endif .
endform.                    "send_report_to_spool
*&      Form write_summary
      text
--> p1        text
<-- p2        text
FORM write_summary .
data: begin of itab occurs 0,
      matnr type matnr,
      end of itab.
select matnr
       from mara
       into table itab
       up to 10 rows.
loop at itab.
write: / itab-matnr.
endloop.
ENDFORM.                    " write_summary
This will create spool in SP01.What data you want to put in Spool write it in form write_summary.I have done coding for testing purpose
After that use that spool for your purpose.
If Useful award point

How generate a crystal reports layout for Batch Report

Dear Experts,
I want to create a crystal reports layout for Batch Report that appears when printing Delivery Note.
I've tried using DocKey@ token but it only works in the delivery note layout itself. The following code at the select expert for this crystal layout doesn't work:
{ODLN.DocEntry} = {?DocKey@}
Kindly guide me in the above issue. Thanks.

I am using version 8.8 SP.00 PL.10
It is very strange that I cannot get the layout connected to the database as I have followed the same steps for all layouts. It all works fine until I get to the invoice stage and then I cannot make the connection.
(I dont need to worry about the sales invoice as this was provided at installation point by our vendor)

How to create a z-tcode for a report in FSI3 transaction

hi friends,
i want to create a z tcode for a report in FSI3 transaction, i have copied the program of the report and created a tcode in se93, but some more tabs are getting displayed in selection screen when im executing my Z Tcode, and report is not getting executed. kindly help.
regards,
nagarajan.j

Hi,
follow these steps:
1. enter into transaction SE43 and change any Z area menu (we won't save it anyway)
2. choose to add a new entry
3. in the popup, choose to add a new report
4. select "Drilldown"
5. the application class depends on the area from you are trying to define/launch drilldown reports. In case of transaction FSI3, the appropriate application class is "FBR FI:FIS - Balance sheet, balance sheet key figures
6. then choose the suitable report type. This corresponds to the nodes that you'll see in transaction FSI3
7. finally choose a report, and optionally a variant.
8. you'll return to the screen "Transaction code for reports" (same as in step 4)
9. expand the button to display further options
10. optionally, specify a custom transaction code and/or description
11. accept all popups. This will create the transaction
12. finally, exit and don't save the area menu
I hope this helps. Kind regards,
Alvaro

Urgent: How to create a new layout for portal lightframeworkpage

Expert,
I want to create a new layout for external facing portal. I have created a new par project also in NWDS, but being new I do not know where to get "com.sap.portal.layouts.default.par" and other supporting libraries.
Need an urgent help.
Thanks in advance
-Lave Kulshreshtha

Hi,
Look into this blog to know, how to write custom layouts:
Nuts and Bolts of the External Facing Portal (EFP)
Once you wrote your layout jsp, then declare it in portalapp.xml like this:
<component name="example_narrowWide">
      <component-config>
        <property name="ClassName" value="com.sapportals.portal.pb.layout.PageLayout"/>
        <property name="SafetyLevel" value="no_safety"/>
      </component-config>
      <component-profile>
        <property name="ComponentType" value="com.sapportals.portal.layout"/>
        <property name="com.sap.portal.pcm.Title" value="2 Columns (Narrow:Wide)"/>
        <property name="com.sap.portal.pcm.Description" value="two-column layout displaying the narrow column on the right"/>
        <property name="com.sap.portal.reserved.layout.TagLibLayout" value="/SERVICE/com.sap.portal.pagebuilder/taglib/layout.tld"/>
        <property name="com.sap.portal.reserved.layout.TagLibHtmlb" value="/SERVICE/com.sap.portal.htmlb/taglib/htmlb.tld"/>
        <property name="com.sap.portal.reserved.layout.TemplateFile" value="*yourLayout.jsp*"/>
        <property name="AuthScheme" value="anonymous"/>
        <property name="com.sap.portal.reserved.layout.Cont1" value="Left Column">
          <property name="plainDescription" value="Column 1"/>
          <property name="orientation" value="vertical"/>
          <property name="designClass" value="prtlPageConL"/>
        </property>
        <property name="com.sap.portal.reserved.layout.Cont2" value="Right Column">
          <property name="plainDescription" value="Column 2"/>
          <property name="orientation" value="vertical"/>
          <property name="designClass" value="prtlPageConR"/>
        </property>
      </component-profile>
    </component>
As all the layout taglibs and required classes are in com.sap.portal.pagebuilder application, you should refer to it in your portalapp.xml SharingReference property.
Try all this and if you have specific questions, let me know.
Regards,
Praveen Gudapati

How to create a user parameter for a report

Hi,
I am writing a report in ORACLE 6.0, and I need to create a user
parameter for my report.
My database includes fields: item_id, item_cost, and item_desc.
What I want to do is: set up a user parameter for item_cost, and
the report will prompt the user to enter number into this
parameter, then the report will display item_id and item_desc
depending the user-entered item_cost.
thanks.
Jun

My SQL code is below:
select item_id, item_invo, item_desc
from tb_item
where item_invo=:p_1
but I got an error message:
REP-0788:Warning: The value of restricted LOV parameter p_1 is
not among the selectedble values.
Would you help me again? Thanks.
Jun

Create a Transaction code for a Report

Hi
I have created a report through report painter. How can i create a transaction code for the report.
Thanks
J

Hi,
T.Code: SE93 - Maintain Transaction
Transaction Code = Zxxxxxx
Click on Create.
Short Text = Name of Report
Click on the radio button for 'Transaction with Parameters'
Press Enter.
Transaction = GR55
Parameters Window...
Screen Field : Screen field can be viewed in technical information screen of the report group to which report belongs for which t.code is to created.
Value: Report Group
Click on Save.
Now you have a custom transaction for the report(s) in a report group.
Hope this helps.
Please assign points to say thanks.

How do i create 2 parameter pages for 1 report?

Hi,
I want to make a purchase order report. first: i need a parameter page to ask how many items that you want to order. second, once user enters a number(let's say 5), i want to have anoter parameter page show 5 empty fields that user can enter 5 items' barcode#, once they entered barcodes, the report will show these 5 items info.
my difficulty is how do i create 2 parameter page for 1 report?
thank you

my question
1- there is any way to assign the Fetch process to specific region so the process take all item in these region only.
2- how can create manual process to fetch row into specific items in page ( i tray these code
SELECT col1, col2, col3 ....
INTO :P1_ITEM1, :P1_ITEM, :P1_ITEM...
FROM table
WHERE id = :P_id ) but no data retrieve .
I do not think that it is possible to have more than one Automated Row Fetch process in a given page. See the thread:
ORA-01403: no data found : Unable to fetch row multiple automated row fetch
On your second question, the manual process should work provided:
P_ID has a value when the process executes. You can do it this way:
i. Make this process as a on-load After/Before header process
ii. Make sure that P_ID page item has value when the process executes (set it from another page or before the pl/sql process executes)

Is it possibel to create one connection [pool for one report only

Hi is it possibe to create one connection pool for one report only. Others report are running from the another connection pool under same DB.
Thanks,

Hi,
Why do u want seperate connectionpool for that single report?
I dont think its possible.Direct database request will be good solution for this.Try importing those columns which are used to build that report into physical layer and create new subject area.Not sure weather its right way to do.
Regards,
Srikanth

How to create a global property for all the reports in Oracle BIP

Hi,
I am a new guy to Oracle BIP. I have a set of reports which is running perfectly. But now, I have to create a property something like this:
If(bproperty)
else
I do not want to have a property for each of the reports but this should be a global one for all the reports.
Please help. Your help is greatly appreciated :)
Thanks,
Karthik

Hi,
I am a new guy to Oracle BIP. I have a set of reports which is running perfectly. But now, I have to create a property something like this:
If(bproperty)
else
I do not want to have a property for each of the reports but this should be a global one for all the reports.
Please help. Your help is greatly appreciated :)
Thanks,
Karthik

Default Layout for a report running in background

Dear Friends,
I have created a layout for report ME2L and set as default layout (for every user)....
Foreground execution picked the DEFAULT layout but when am trying to execute the same report in background, default layout is not picked but the STANDARD layout is shown in the spool
Could you please suggest me how can i use same report layout for foreground as well as background
Thanks in Advance
Ana

Atanu dey,
If you wnat to download excel in back ground
You have to download in application server only.
EX:
DATA : v_filepath(80)     VALUE '/data/sapdata/inc/error_log/pme_br/',
c_coma     VALUE ',' .
OPEN DATASET v_filepath FOR OUTPUT IN TEXT MODE.
    IF sy-subrc EQ 0.
     LOOP AT i_errors_bat.
     CONCATENATE i_errors_bat-plant c_coma
                             i_errors_bat-zzvendor c_coma
                       INTO v_string.
        TRANSFER v_string TO v_filepath.
      ENDLOOP.
   CLOSE DATASET v_filepath.
Note : you can download in presentation server also.
but it requires lot of authorizations and have to use
FTP commands.
Reason is Apllication server in back ground has to
recognize the from which system request came.
Better go for OPEN DATA sets.
Don't forget to reward if useful.....

Can I create x1 CR layout for all databases

Hi
Is it possible to have x1 Crystal Report Layout for x17 Databases with different Logos (Logos are based off the databases), a little detail:
We have x17 databases on the same SQL Server, I have created a Crystal Report which can be used for all companies / databases but I am wanting to know if there is a possibility to have this x1 Crystal Report and everytime you print from the relevant database it pulls that specific company Logo? Is there any Crystal Syntax to create this? especially when the field is labelled "Picture2" and is not a SBO Table & Field.
It seems logical than having x17 Crystal Reports.
Any ideas?
Regards
Kurt Walters

Hi Julie
Thanks for the reply, for your last alternative:
"An alternative is to embed all 17 picture files into your layout, one on top of the other, and conditionally suppress each one based on the database name"
I tried this with an If statement based off Company Name on the OADM table but was having issue with the If Statement (Format Editor > (X+2) Button next to Supress > Format Formula Editor - Suppress).
I will give the Print Preferences a Go but will it be possible with a If statement?
Regards
Kurt Walters

How to create a F4 help for a report selection screen field

hi,
can any one guide me to create F4 help for a field in a selection screen in a report program,plz give me a sample code

hi,
Here are the following ways
1.with the help of match code objects we can create the F4 Functionality for Field.
Syntax is :
PARAMETERS: p_org LIKE t527x-orgeh MATCHCODE OBJECT zorg.
2. One more thing is we can do it with Search Help's also.
3. Even we can do it HELP Views also.
Help Views:
You have to create a help view if a view with outer join is needed as selection method of a search help
The selection method of a search help is either a table or a view. If you have to select data from several tables for the search help, you should generally use a database view as selection method. However, a database view always implements an inner join. If you need a view with outer join for the data selection, you have to use a help view as selection method.
All the tables included in a help view must be linked with foreign keys. Only foreign keys that have certain attributes can be used here. The first table to be inserted in the help view is called the primary table of the help view. The tables added to this primary table with foreign keys are called secondary tables.
The functionality of a help view has changed significantly between Release 3.0 and Release 4.0. In Release 3.0, a help view was automatically displayed for the input help (F4 help) for all the fields that were checked against the primary table of the help view. This is no longer the case in Release 4.0.
As of Release 4.0, you must explicitly create a search help that must be linked with the fields for which it is offered (see Linking Search Helps with Screen Fields ).
Existing help views are automatically migrated to search helps when you upgrade to a release higher than 4.0.
A help view implements an outer join, i.e. all the contents of the primary table of the help view are always displayed. You therefore should not formulate a selection condition for fields in one of the secondary tables of the help view. If records of these secondary tables cannot be read as a result of this selection condition, the contents of the corresponding fields of the secondary table are displayed with initial value.
<REMOVED BY MODERATOR>
Edited by: Alvaro Tejada Galindo on Feb 15, 2008 3:15 PM

Create a Global Layout for Embargo Report

Similar Messages

Maybe you are looking for