Create a Logistics Information System (LIS) S902 like S066
Hi:
I created a LIS 'S902' ,it was copied from S066. and use TCODE 'MCSCHECK' check is OK. there some different in the update programs as follow:
When a Customer Credit Management is not maintained, the RETURNCODE value '4'. mean don't need to update new recode into this table and call FM 'stat_curr_convert_ex' to convert curr. if call FM 'stat_curr_convert_ex' to convert curr, have some error :"Error determining local currency: ER type
2008.05.20 from CNY to RC 4".
How can i use RECURNCODE to deal with the error?
or how can i control the program of RMCX0002 was not executed when When Customer Credit Management is not maintained.
RMCSS066 of S066
common part data for formulas/requirements *
CLEAR returncode.
IF xmcvbep-lfrel NE true OR
xmcvbak-kkber IS INITIAL OR
xmcvbak-knkli IS INITIAL OR
xmcvbap-cmpnt IS INITIAL OR
xmcvbak-cmwae IS INITIAL.
returncode = 4.
ENDIF.
IF returncode <> 0.
mclogging-exreqr = true.
IF control-logging = false.
EXIT.
ENDIF.
ENDIF.
unit conversion *
___IF returncode EQ 0___
AND NOT fu_aoeiw IS INITIAL.
PERFORM stat_curr_convert_ex(rmcs1000)
USING fu_aoeiw
xmcvbkd-kursk_dat
xmcvbap-erdat
xmcvbak-waerk
xmcvbak-hwaer
xmcvbak-cmwae
xmcvbkd-kursk
xmcvbap-cmkua
xmcvbak-kurst
'M'
CHANGING fu_aoeiw.
ENDIF.
RMCX0002 OF S902
requirements for the performance measure *
CLEAR RETURNCODE.
PERFORM MCV1_415(SAPFMCVF).
IF RETURNCODE <> 0.
MCLOGGING-EXREQR = TRUE.
IF CONTROL-LOGGING = FALSE.
EXIT.
ENDIF.
ENDIF.
unit conversion *
IF FUOEIKW <> 0._
PERFORM STAT_CURR_CONVERT_EX(RMCS1000)
USING FU_OEIKW
XMCVBKD-KURSK_DAT
XMCVBAP-ERDAT
XMCVBAK-WAERK
XMCVBAK-HWAER
XMCVBAK-CMWAE
XMCVBKD-KURSK
XMCVBAP-CMKUA
XMCVBAK-KURST
'M'
CHANGING FU_OEIKW.
ENDIF.
THANKS!
Edited by: gambol he on May 21, 2008 5:23 AM
Edited by: gambol he on May 22, 2008 9:45 AM
How did you get LIS in SAP and i have been trying but the system is not updating.
Please can you send me the steps for LIS.
Thanking you
Similar Messages
-
Logistics Information System (LIS) - Rejected Sales
Hello!
I have activated the Logistics Information System (LIS), with standard information structures, but I don´t want to see the Rejected Sales (Reasons For Rejection 10).
Is there any way to remove the rejected sales document from LIS?
Thanks in advance, Itzel.You have to mention your update rules accordingly, not to consider the Rejected sales.
In order to do this, you may have to first delete the data in the information structure. Then redefine the update rules for various keyfigures and activate the infostructure.
Now the new rules will be implemented and the rejected sales wont be counted as per your definition.
Hope this helps.
Reward if this helps you -
Logistics Information System (LO-LIS)
hi
gurus
can please forward me docu over logistics information system whether it can be used as reporting tool in r/s sidei n case yes send me step by step docu to
mail my id [email protected]
pt will be rewarded
cheers
s naresh reddyGo to this site : http://www.easymarketplace.de/online-pdfs.php
you will get whatevr pdf you need. including reporting.
In this site => Go to I-H in that you will find Logistics Information System (LO-LIS)
Narayani
Message was edited by:
Narayani -
Logistics Information System - Transaction MCSZ - Infostructure S032
Hello,
I have the following problem: The material group (table mara-matkl) are updated in the LIS (Logistics Information System) with each stock movement. We have materials with those the material group changed. But to these materials it will not give no more stock movements, thus also no update in the LIS.
So that however the material group evaluations are correct, i would like to change only the field material group in the infostructure S032. (with the current data from the table MARA) I use to it the transaction MCSZ and the method "automatic data enhancement". Unfortunately the function for this infostructure is reduced.
How can I solve the problem? Did that make already times someone? Is there another way to update around the data? I would like to actually make no complete reconstruction of the infostructure.
Regards
Jana VoglS032 is an infostructure that captures business events.
The event will not be gone if you just mark the material for deletion.
Imagine:
material mater = Elvis
event = Jail house rock
Even Elvis died, you can still listen to Jail house rock.
Even you archive the material, the data will still be visible for analysis in the info structures.
but you can archive data in info structures -
Logistics Information System-Sales price conditions Analysis -(konv-KSCHL)
Hi All,
It,s possible make sales price conditions analysis with Logistics Information System (LO-LIS) -table konv for sd sales?
Has anyone done something similar? (Sum the value of conditions by period of sd sales)
Thanks, Carlos DuarteHi,
Please check whether the entries maintain in LIS update or not?
Path:
SPRO --> IMG --> Logistics-General -->Logistics Information System --> Logistics Data Warehouse --> Updating --> Updating Control --> Settings: Sales --> Update Group
--> Assign Update Gropu at Header Level
Maintain following data, sperately in two rows:
Sales Org: say,1234
DstCh:
Division:
Customer Statistic Group: +
Statistics group for sales document type: 1
and
Sales Org:
DstCh:
Division:
Customer Statistic Group: +
Statistics group for sales document type: 2
SPRO --> IMG --> Logistics-General -->Logistics Information System --> Logistics Data Warehouse --> Updating --> Updating Control --> Settings: Sales --> Update Group
--> Assign Update Group at Item Level
Maintain following data, sperately in two rows:
Sales Org:
DstCh:
Division:
Customer Statistic Group: +
Material Statistic Group: 1
Statistics group for sales document type: 1
Statistics group for the item category: 1
and
Sales Org:
DstCh:
Division:
Customer Statistic Group: +
Material Statistic Group: 1
Statistics group for sales document type: 2
Statistics group for the item category: 2
Best Regards,
Amit.
Note: Once, you will maintain Settings for LIS-Update, it will update onwards transactions and will not update for already done transactions. -
Logistics Information Sytem (LIS) Doc
Hi Experts,
Can anyone send me the documents in Logistics Information System? pls mail to [email protected]
Regards,
SS
Message was edited by:
SS SHi SS,
Pls check with ur mail box. i sent the doc for LIS. Pls refer the below link and download the this LIS doc also
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOLIS/LOLIS.pdf
it's very helpful doc.
thanks & regards
Mohan -
While creating message in Satellite system we would like to get popup scren
Hi Gurus,
While creating message in Satellite system we would like to get a popup screen that should populate/show list of persons responsible/Business partners to whom the mail should go directly to their mail box. Do we have to develop a report for it or can use an already existing job?
Thanks in advance,
Vinod PalliHi you can create messages from two places either from the standard help menu.
help->create support message
or
test workbench status message->click messages tab and then click create button.
Now go to tcode Solution_manager
select your landscape and then press execute button you will get the list of all messages with status ,person create d and person responsible.
if you click any one you can go into the details of the same.
PLEASE :reward point for the same.
Regards
Prakhar -
Hai gurus,
How to activate the Logistics information system for PP and QM module to activate and pull out
reports generation under information system.
waiting for the positive reply
regards,
sekar chandDear Sekar,
From PP point,update the shop floor control Info structures using T Code OMOD,or else through
OPL8,under Implementation tab page->Shop Floor Information system->click on the update icon.
S021 Production order
S022 Operation
S023 Material
S024 Work center
S025 RS header
S026 Material usage
S027 Product costs
S028 Rep. point statistics
S029 Kanban
S225 Goods receipts: repetitive mfg
S226 Material usage: repetitive mfg
S227 Product Costs: Repetitive Mfg
Regards
Mangalraj.S -
Use of Logistics Information System
Hi,
I would like to know if is advised use Logistic Information System considering that SAP don't give support at all.
Regards.
Kleyson Rios.Hi Kleyson,
I would like to know if is advised use Logistic Information System considering that SAP don't give support at all.
Where did you get the idea that the LIS is not supported anymore?
Of course it is fully supported in SAP ERP through official maintenance.
On the other hand SAP recommends you to use a different environment for Reporting than for OLTP, that makes a lot of sense.
It is true that the LIS functionality has not evolved in many years, because SAP wants you to implement a full blown BI instead of a homegrown Reporting solution in the ERP!
Best Regards,
Franck -
Self defined application in logistics information system
Hi,
Can someone explain me how can transfer the value of the condition EK01 to a self defined applications in Logistiscs Information System?
I would like to modify an existing one and add value EK01 to a key figure.
Can someone give me the main steps to do this.
Best Regards
João FernandesThe link is
http://help.sap.com/printdocu/core/Print46c/en/Data/pdf/LOLIS/LOLIS_KOMPONENTEN DES LIS.pdf
There should be a PDF document .
If not
go to http://help.sap.com/printdocu/core/Print46c/en/Data/htm/english.htm
and here in PDF index, search for Information system and get the PDF document for LIS.
Reward if this helps. -
Selection version in Logistics Information system
We execute MCBC transaction as a background job. The output of the MCBC transaction is saved as a Selection version.
The Selection version number range starts from BG000 and runs upto BG 998. After that we try to schedule the MCBC in background, but it fails because no more number open number ranges exist.
Is there any possibility of assigning a new Selection version number range to the LIS info structures ?
Your inputs would be really valuable
Thanks !
KishoreThe link is
http://help.sap.com/printdocu/core/Print46c/en/Data/pdf/LOLIS/LOLIS_KOMPONENTEN DES LIS.pdf
There should be a PDF document .
If not
go to http://help.sap.com/printdocu/core/Print46c/en/Data/htm/english.htm
and here in PDF index, search for Information system and get the PDF document for LIS.
Reward if this helps. -
LIS - Logistics Information systems change in info structure settings.
Hi,
I want to change the Info structure parameter of table S060 in LIS. By changing the Period split as Posting period form Months (Calander year)
This would change all the records updateding in the table w.r.t fiscal year.
But I want to know the settings where it would chage the old / existing data in the table also (ie it sould be with retro effect)
Need it urgently. Points would be rewarded
Nayan ShahHi,
Thanks but my issue is still not resolved. The T code OMO1 will allow me to change the LIS table S060 from Months (Calander month) to Fiscal period. But I want the old existing data also to be refreshed with fiscal period.
I want to know is there any refresh method or creation of new variant process which would allow me to refresh the old data (Calander month) with new Fiscal month.
Regards
Nayan Shah -
MM - LIS(Logistics information system)
Dear All,
I am having some issues in LIS, and i am having little exposure in this area.Could you please let me know about the configuration part and usagen in Detail.
Also if i could get some study material it would be more helpful.
Regards
Sunilhttp://help.sap.com/saphelp_47x200/helpdata/en/bd/a140eb44d511d188fe0000e8322f96/frameset.htm
-
Logistic information system (LIS)
Dear Experts !
Can anybody forward the documentation of LIS ? Configuration document,if posible.
I would like to maintain letter of credit details in LIS for further tracking.Is it posisble?
Can i use same flexible analys to create reports and exceptions ?
Best rgds.
ManiHI
LIS Extraction
take a look at this great blogs they will help you:
LOGISTIC COCKPIT - WHEN YOU NEED MORE - First option: enhance it !
Custom fields and BW extractors : Making a mixed marriage work! (Part 1-1)
Additional some threads:
Question on Enhancing 2lis data source.
Precautions before enhancing 2LIS datasource
Re: Enhancements
LIS is no longer available now and LO is used in its place.
To understand LO extraction go through these web logs by Roberto
/people/sap.user72/blog/2004/12/16/logistic-cockpit-delta-mechanism--episode-one-v3-update-the-145serializer146
LOGISTIC COCKPIT DELTA MECHANISM - Episode two: V3 Update, when some problems can occur...
LOGISTIC COCKPIT DELTA MECHANISM - Episode three: the new update methods
LOGISTIC COCKPIT - WHEN YOU NEED MORE - First option: enhance it !
LOGISTIC COCKPIT: a new deal overshadowed by the old-fashioned LIS ?
Also go through this link to know the procedure step by step
http://www.sap-img.com/business/lo-cockpit-step-by-step.htm
For advantage of LO over LIS, go through this thread
Lo extraction
hope it helps, -
hi gurus
while i was generating a customer report i faced a problem.
after creating the characters, key figures and infosets i need to assign the statistics group for my sales order type Z15.
but in VOV8 for my Z15 order type the field statistics group is missing.
can any one direct me to restore the field. and explain why it has happened
thank u all in advance
madhuHi
For this issue Please Go to T-Code OVRH and Assign Update Group " 1" to Your Document Type "Z15".
Now this Field will be reflected by the Value.
This will solve your Querry.
Path is IMG-LG-LIS-LOGISTICS DATAWAREHOUSE-UPDATING-UPDATE CONTROL-SALES..
Regards
MBS
Message was edited by:
MBS
Maybe you are looking for
-
How can I put a file in a directory server extracted by a abap report?
Hi! I need to extract data from r/3 server by a report and put the output into one file in a directory of the server. In Abap code someone know how can I do that? Thanks!
-
HOW TO CALL ANOTHER PAGE USING PL/SQL PDK?
Hi, I am using pl/sql pdk to create portlets. When I need to call another page I am using wwpob_page.show(p_pageid) but instead it displays File Download wizard. Anyone knows workaroud for this? Are there any other ways to call other pages with portl
-
Leave request example in workflow
Hi, Has anyone got step-by-step example of leave request using workflow? Pls send me the document or the link My id : [email protected] Regards
-
Jar File Entry Names (separator)
How goes it everyone? I wrote some code to find a class on the classpath, which goes through the directories and jars on the classpath to find the class in question. It works fine on Linux but when I try to run it from a .jar on Windows it fails. I t
-
Iphone 5, 7.0.4 ios. Phone is keep on going into recovery mode and now it is not restoing through itunes as well. Showing error 9. please help