Create a manditory "username" for WRT54G logon

Is it possible to modify the configuration on a Linksys router so as a value is required in the "username" when you log onto to the router?

Only third party firmware has a username / password login combination.

Similar Messages

Lost username for WRT54GS, resetting router doesn't seem to restore defaults

I lost username for WRT54GS so I tried resetting as per instructions, holding down reset key for 30 seconds, but can't log in using 'admin' and blank password, which I understand is factory default, and which should have been restored on reset--right? I have reset the router at least 3 times, always making sure I push reset key in for 30 seconds. That's the simplest to explain of two related problems.
On a second computer on same network, I have no Internet access at all, and if I try to get to the router it says it can't find 192.168.1.1. Since I can access the Internet on computer #1, and also have a voice over IP device hooked up to router that is also working, I assume this problem is on computer #2 and not the router EXCEPT--how does this relate to the problem stated for computer #1?
Before this particular way of acting, computer #2 was announcing that there was an IP address conflict. It doesn't say that now, it just can't connect to anything. What's odd is that if I display network connections on computer #2, the Linksys connection shows and displays strong signal exactly as it does on computer #1, so obviously computer #2 can 'see' the router, but clicking 'Connect' on the wireless network connections window doesn't work, it simply won't connect. I tried setting up network again but that didn't clear the problem.
I have a great suspicion this has to do, at least in part, with IP addresses but don't know where to go from here.
I appreciate detailed step by step instructions because I am a novice at this. Brave but ignernt.

Actually, its the other way around, blank username and admin for the password.

I'm confused about the apple ID transition from my aol screen name. Does it continue to use my aol email as my apple ID, converting it somehow or do I need to provide a new email address or just create a new username for the apple ID?

I'm confused about the transition to an apple ID that doesn't use my aol email to sign in. The instructions are vague and ambiguous. Any help would be appreciated.

OK, so if your current Apple ID using your AOL Username (like johndoe), then you need to log onto Manage your Apple ID and EDIT that AOL Username to a valid email address: Apple - My Apple ID
If you have an AOL email address (like [email protected]), and you are not using that as another Apple ID, you can change the AOL Username Apple ID to that. Otherwise, you can change it to any valid email address (which you will have to verify when you change to it).
Hope that clears it up. Post back if it doesn't!
Cheers,
GB

After complete reset of iPod after lockout, I cannot retrieve old gamecenter ID. how can I use my old account for gamecenter now that we have had to create a new username?

We had to create a new username for gamecenter using the same apple ID. We want to use the old gamecenter account....we have purchased in-app items for those games and now have no access to that account. How can I fix this? Or am I just out of luck and start over with the new username.....

You are running into the Activation lock and you need to enter the Apple ID and password for the account last used on the iPod.
iCloud: Find My iPhone Activation Lock in iOS 7
To recovery use of that account:
Why do I see the message "This Apple ID has been disabled for security reasons” when I enter my password?
This message means that someone was unable to sign in to this account multiple times. The Apple ID system will disable the account to prevent unauthorized people from gaining access to your information. You'll need to follow the instructions on My Apple ID to reset your password.
If not successful, contact iTunes
Contact iTunes

Can we create a Screen Prompting for username and password

Hi
i have a requirement , to design a screen with username and password. Once the user logins in, another screen with the details are to be displayed.
Can anybpdy help in creating the initial username and password?
Regards
Ramya

Hi Ramya,
Plz clarify ypur requirement.
As i m getting, for first screen u need user_name and password, so u have to create two input fields.
And bind these input fields with the context attributes. For the input field which is used for password,
changed its properties. Select the property Password Field.
and what ever details u want to show u can use just select statement.
get back to me if any problem.
Regards,
Pankaj Aggarwal

When a new user is created on the Server Computer,Why profile for the user is created as computername.username?

When a new user is created on the Server Computer,Why profile for the user is created as computername.username?

This is done if there are domain users with the same name. For example, if there is a domain user named 'test' who has logged in on the server, he will get the profile 'test'. If you then create a local user named 'test', the profile 'test' already exists
and the computer will create the profile 'computername.test'

I know my Apple Id (not .mac) and password but I can't logon to ichat. I keep getting a message of password not matched. Do I need to create a new account for Ichat?

I know my Apple Id (it isn't ".mac") and password but I can't log on to ichat. I keep getting a message of password not matched. I saw somewhere that my Apple id is the same as my ichat account. Do I need to create a new account for Ichat? I've already reset my Apple id password 3 times in the last 2 days. What am I doing wrong?

Hi,
At one time only Email IDs from Apple (when it was just @Mac.com) were referred to as "Apple IDs"
Other IDs such as to log in to Discussions were know as Discussion IDs
Things like the Online Store and iTunes and Apple realising that people would prefer one ID to have access to Everything tended to move things together.
There can be a variety of combos now
iChat Name
@mac.com before MobileMe
@mac.com post MobileMe
AIM Names
AIM names current
MobileMe (@Me.com)
Style
Email Address valid with the .Mac service prior MobileMe Note 1
Email style Name Valid with AIM
May or may not be an Email address
Can be AIM issued or third party Email address
Valid Email with MobileMe Service
Other Abilities
May also be Currently valid email linked to a MobileMe account
Maybe Valid Apple ID
Is a Valid AIM Screen Name
May Not be a Valid Apple ID (was an option choice at one stage)
Is a Valid AIM Screen Name
May not look like an Email (No @whatever.com) but may be linked to either an AOL email account or AIM one
Current Registration seems to be pushing Email registration (@AIM.com)or asking to use another you currently use.
Trial Accounts are limited to the Trial Period Only as Emails, Valid AIM Screen Names and Apple IDs.
Apple ID
Possibly (likely)
Possibly (depends when Registered)
More currently Yes.
No
No
Yes
Glad I could help.
8:39 PM Thursday; September 15, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Can't create username for communities

Hello,
i have 2 Apple ID's under my name , and have a username on support communities under one of my older ID's but now i want to create one more username under my newer ID but the thing is i get this error whenever i try to create one.
An account utilizing this email address already exists.
Only one account per email address is allowed on Apple Support Communities.
or sometime it says
We’re sorry.
The system is unavailable.
so guys please help me with this.

@ J.K. ROFLing :
lets make it simple,
i have a total of 3 Apple ID with 2 of them i have discussions profiles
but the 3rd one won't let me allow to create a profile it says this
An account utilizing this email address already exists.
Only one account per email address is allowed on Apple Support Communities.
but the thing is both the other Apple ID's don't have this e-mail address which i'm using in this 3rd one, so why it shows me this error ?

ITS 620 - how to create a service file for SAPGUI for HTML option

Hi,
We have the following configuration :
ITS 620 installed
IIS webserver
NTLM Authentication on webserver
SAP 46C
We have some reports that use the IACs option of creating ITS reports and we are able to create the service files using webstudio where we can save a service id and password so that when the ITS page is called, it logs on the user directly into the system.
Now, we are trying to create a new ITS page for a custom Z transaction and would like to use the SAPGUI for HTML option so that we do not have to use Webstudio to create and modify the HTML pages.
When I call the ITS page for the new transaction, it brings up the logon screen for the user, which we want to avoid. If I create a new service file for this Z transaction without any HTML pages then I get an error.
Is there a way to copy the WEBGUI.SRVC file to a custome SRVC file, I tried to create to copy it to a test file called ZTEST.SRVC for my test transaction called ZTEST and now I get an error.
thanks in advance
N.S.

Hello N.S.
You can create a service file, like ZSERVICE.SRVC. The parameters should be:
~webgui 1
~transaction ztransaction
~client 001
~login username
~password password
~language EN
The "~webgui 1" allows the ITS to use the Webgui to dynamically generate the page (no IAC needed.)
The "~transaction" is the transaction code of your service.
The "~client" is the client number.
The "~login" is the username.
The "~password" is the user's password.
the "~language" is the language for the users.
Note that the last four are required for automatic logon. If end users use a variety of languages though the ~language can be prepended to the URL to support different languages. (Leave it blank in the srvc file then.)
Edgar

How can we load apps without creating an Apple ID for each employee?

We have at least two apps that we'd like to distribute to our company iPads. We would like to hand the employee the iPad with everything loaded. We don't care if they create their own Apple ID and manage it after the fact but when the employee gets the iPad, it should have the apps they require.
How do we load these apps without creating an Apple ID for each employee? If we load the apps from App Store with our Apple ID, the app requires that username and password whenever there is an update. The employee can not update the app without our username and password or they have to delete and reinstall the app with their own credentials. Is there a way to load an app so that it doesn't require the credentials of the person that loaded it whenever there's an update?

Turn on computer.
Open itunes.
Connect a device.
Select what you want to sync.
Sync
Repeat for the otehr device

Firmware upgrade for WRT54G v7

is there no firmware upgrade for WRT54G v7? i didn't even find version7 as listed in linksys page for routers....

Click on Download and save the file on your Desktop..
Follow these steps to upgrade the firmware on the device : -
Open an Internet Explorer browser page on a computer hard wired to the router...In the address bar type - 192.168.1.1...Leave the Username blank & in Password use dmin in lower case...Click on the 'Administration' tab- Then click on the 'Firmware Upgrade' sub tab-Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...Wait for few seconds until it shows that "Upgrade is successful" After the firmware
upgrade, click on "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed".
Now reset your router :
Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...

Error in the configuration for sap logon tickets

Hi Forum,
I use Tcode crmd_order_bp to see the BP cockpit and the error message displays as
<b>Error in the configuration for SAP logon tickets</b>
But if I click "Yes", system displays cockpit.
How can I avoid this error.
Thanks in advance
Regards
Shridhar

You will still need to configure SSO (either by logon ticket or username/password). The data source access is done using the username/password configured in the UM Config dialog box.
I can see where you're coming from with your thinking, however logon-ticket-based SSO is probably the best approach.
Cheers,
Darren.

Steps to create a logical system for client 001.

Hi,
In client 000 go to transaction scc4. There you create your new client for sap netweaver abap trial version for BI?
Here, can you give me steps to create a logical system with client 001 using tcode scc4.
Thanks,
Kannan

hi
     First log on to SAP R/3 server connections Go to SCC4 in R/3 & in Scc4 BW server. A screen opens in that logical name of the system would be opened in both (R/3 & BW).
     Take notepad in it save .R/3 & BW logical names go to R/3 & click SM59 to create R/3 connections click then a screen opens gives BW logical name in RFC Destination option & give connection. type 3 & give some description & then press enter.
     You will get another screen under it then at target host gives BW server name we will get it from BW logon change ID, IP address option & give the system no. The system no go to logon pad just drag it then you will see the name.
     Then click on log on securities go to log on give BW server details like No, client user Password. Then save it then click test connection tab if there are errors then it gives yellow color if they are no error the whole thing come as white.
     Then click on the Remote Logon then we go to BW server give RFC SM59 & click create. Then give the server name which is at the bottom right corner give it then give the no, name, password in logon Security save it & test connection & then remote logon.
     R/3 - B W - R/3
     Logical connection source system connection is used to transfer the data from R/3 to BW. Go to BW system& click RSA1 go to source system option go to top to the source systems right click on it. Then click create then a screens opens then.
     PC Flat file , DB  Database
     Select the option manual then a screen appears RFC Destination, Logical source name then click OK then it goes to opens other screen save it test connection then remote login then it go back to the then a screen opens then click only activate.
     BW  RS1  SOURCE SYSTEM  CREATE MANUAL AUTOMATIC CELL
     R/3  Test connections login  back  replicate method  active data R/3 Source system you will able to.
regards
ashwin

Business Management Error: You are attempting to create a user with a domain logon that does not exist. Select another domain logon and try again.

Hello,
Suddenly the working CRM is being stopped for some group of users.
I drilled down to the issue and have checked that the users from Domain in which CRM is installed are having CRM access.
But for other domain user having problem to access CRM.
I tried to add a user from a domain which is not of CRM domain then it gives following error.
"Business Management Error: You are attempting to create a user with a domain logon that does not exist. Select another domain logon and try again.
<Message>LookupAccountNameW failed with error</Message> "
The change is made - AD group have upgraded Activer Directory server to 2012 R2
Please help as the Production CRM is not working for other domain user.

We have Activer Directory Structure like below.
One Root Domain says A
and there are multiple child domain like B,C,D etc...
B,C and D are all in same level,they are child of A domain.
There are two way transitive trusts between A and all the child Domain.
But there is no trust in between B and C and so on.
Our CRM server is in B domain and B domain's user can access CRM but users of Domain C,D and so on can not access CRM.
If this post answers your question, please click "Mark As Answer" on the post and "Mark as Helpful"

Report sometimes prompts for database logon prior to execution

I have installed the Crystal Reports Integration Addon on our system and it works correclty for users on our terminal services server. But when I installed it on a user's PC running Windows XP, when I go to execute an existing report, the Runtime viewer launches, and then displays a Database logon panel with the Server field filled in, the database field is blank, and the SA user and password fields are populated, and I get an error that says logon failed. I type in the SA user id and password, but get the same error.
If the same user logs onto the TS server, the runtime viewer launches correctly and the report prompts for input, then displays the appropriate data (no database logon is requested). But if it runs at that user's workstation, the viewer launches, and then prompts for database logon.
We are running SAP 2007A SP00 PL47, CR Basic 2008 for SAP Business One, and the runtime viewer is Crystal Reports 2008 Runtime SP1. version 2.0.0.7

Hi Bruce,
I am not sure what the problem is.
The only workaround I can think of is to change the Integrated Security in the report to true. This means that you will be using Windows Authentication as opposed SQL Authentication. This will not prompt for SQL username and password.
Usually this is NOT an ideal process as you will have to Add each and every Windows user in the SQL Database you are trying to access. For example, you have to add DOMAIN_NAME\User_Name under the Database Properties.
I am not sure what the minimum security you need to run the report. You will try a few different options and see what works best for you. Avoid permissions that would give users ability to write to the SQL database.
Again, I know this is not ideal. But I am not sure what else can be done here.
Krishnan

Create a manditory "username" for WRT54G logon

Similar Messages

Maybe you are looking for