Create a new mailbox in pop3 server

I have create a pop3 server on windows 2003 server. I want to create new mailbox by java program . How can i done this by java program?
Plz help me...

Typo: Not AS, it should be AT
EXEC ('CREATE LOGIN [INTERNET\Domain Admins]') AT Link

Similar Messages

How do I create a new mailbox? (Not account)

I can't figure out how to create a new mailbox or folder. (It even shows them in the manual) I know to tap the folder icon on bottom. It takes the email you want to file back to the INBOX, TRASH page. Now what how do you create a folder? Thanks.

If you are accessing an IMAP account, you can create additional server stored mailboxes with the email client used on your computer for accessing the account, or via webmail access for the account using a browser, and the server stored mailboxes created will be available automatically when accessing the account with the iPhone.
If a POP account, this is not possible by any means.

Exchange 2010 - Create a new Mailbox Database

Hello all and thanks in advance for your time and expertise.
Here's my scenario:
In my ORG we have one exchange server. The hard drive space on this server was quite low so we added two more drives which are independent and in their own Raid Configuration from the drives that were already installed. In other words, the current
mailbox database is housed on drives with a total storage capacity of 837GB.
We recently added two more drives, each 2TB, and configured them in a RAID1.
I'm going to create a new Mailbox Database on the 2TB drives and move over some mailboxes to balance out the storage.
Question one: When we move some of the mailboxes over to the new database - will this free up space on the existing database or do we have to reclaim it such as with an offline degrag.
Question two: When I create the new mailbox database and I'm prompted to Enter the new file locations for the database (database path and log folder path) - do I just change the paths to the new drive letter path such as G:
We're eventually going to Office365 (hopefully sooner rather than later) but I just want to make sure I handle this process correctly. Your input here is greatly appreciated.

Hello,
Your databse size is 650 GB. As per my experience , it would not take more than 14 hours for total mailbox movement.
You will be creating new database of 2 TB , you have already allocated 2 Tb drive to exchange server.
If you are dividing drive into 2 or four part and creating that much databse, it will be helpful for maintence activity in future.
It is recommended that you move mailbox during off bussiness hours, it will fasten the movment,as there will be no load on exchange server . You can do it on daily basis Or you can do it on weekend .
You need to take care of logs generated during movment, are you going to use seperate log drive for databse, or combine with database drive. If you are moving all mailbox to one database, It will genrate same size of logs file as of total mailboxes
size (650 GB). You neeed to handle it properly. Enable circular logging on database, after movment ,you can disable it.
Moreover, if you will create move request of all mailboxes, exchange will process nly 50 request, rest will be in queue state.
Regarding public folders, I understand there is no seperate disk for public folders, if you planning to delete old dtabse and free up disk space, you will have to move this public folders database to new disk also.
Would recommend that you take advice from other expert in this forum, before implementation.

MapiExceptionADNotFound When Creating a new Mailbox Database, No such error on the internet

HI
I have a problem that is when I create a new Mailbox Database I face the Error
Failed
Error:
Exchange is unable to mount the database that you specified. Specified database: EMAIL\Second Storage Group\EmailData; Error code: MapiExceptionADNotFound: Unable to mount database. (hr=0x80004005, ec=2417)
Exchange Management Shell command attempted:
mount-database -Identity 'CN=EmailData,CN=Second Storage Group,CN=InformationStore,CN=EMAIL,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=First Organization,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=Domain,DC=com'
Elapsed Time: 00:00:00
I have this server exchange 2007 SP1 running on Server 2003 SP2 R2 64-Bit
its also additional exchange to the old ex server 2003 SP2
what is this error
I check the evenlog and there is NO related error for this
and I ran EXPBA and it report no problem
I search MSN and Google for this and nothing usefull found
what shell I do
I am a fried that the Main database may fail if this present

Force replication betwenn Domain Controllers.
Article in PT-BR:
http://www.wellingtonagapto.org/2014/07/mapiexceptionadnotfound-unable-to-mount-database-hr-0x80004005-ec-2417-Exchange-Server-2007.html
Wellington Agápto
Consultor de Comunicações Unificadas & Mobilidade
ITIL, CCNA, MCP, MTA, MCITP, MCTS, MCSA, MCSE Communication
Edefense Segurança Digital
Site: http://www.edefense.com.br
Blog: http://www.wellingtonagapto.org

How do you create a new mailbox with Iphone 4?

When I select a mail message to move to a mailbox, I receive "Move this message to a new mailbox" at the top of the Iphone 4, but I can't create a new mailbox. I tried

Mailboxes/Folders cannot be created directly on the iPhone. They must be created on the mail server, then synced to your phone. This requires an Exchange or IMAP account, as such is not possible with a POP account.

How do you create a new mailbox

Hi,
I have an iPhone 5 running iOS 8.1.
I also have Verizon webmail which I access via the iPhone's Mail app.
I am trying to create a new mailbox in order to store certain emails on my iPhone somewhere besides the Inbox.
In the Mail app and at Mailboxes, I do: Edit->New Mailbox   and then enter a name for the new mailbox.
However, everytime I press "Save", I get:
          Unable to Create Mailbox
The mailbox couldn't be created on the server
          <OK>
Any help is appreciated.
TIA,
Matt

set it up manually then settings are listed here
http://forums.verizon.com/t5/Verizon-net-Email/Verizon-s-New-POP-settings-for-Em ail/td-p/591563

This may seem a silly question, but how can I create a new mailbox on my iPad?

This may seem a silly question, but how can I create a new mailbox on my iPad?

A new mailbox/folder - you can't, not yet. If you're using an IMAP mail account, you can create a mailbox on the server (either through webmail or desktop mail) and it'll appear on the iPad.
We've been told the upcoming iOS5 will allow you to do so (I assume, provided you have IMAP).
Matt

TS3276 I created a new mailbox in mail, but it does not show up in my list

I created a new mailbox in mail, but it does not show up in my list of mailboxes. Now I cannot change it or delete it. I keep getting an error message that I must resolve conflicts, but it won't let me change anything. Can you help me fix this?

Found it, thanks to the answer Vixen-of-Venus gave - thanks.

To create a new file in application server and transfer data to ti

i am doing the following where i have to create a new file in application server and transfer data to tht file from an internal table.but its saying file cant be opened.the path i am giving to parameter p_prefil is /tmp/prachi.txt.
wats the prob..can anyone help.
DATA:L_WA_FINAL TYPE TY_FINAL,
l_wa_string type string.
OPEN DATASET P_PREFIL FOR OUTPUT IN text mode encoding default.
if sy-subrc <> 0.
write: ' file cannot be opened'.
stop.
endif.
LOOP AT P_I_FINAL INTO L_WA_FINAL.
move l_wa_final to l_wa_string.
TRANSFER l_wa_string TO P_PREFIL.
if sy-subrc <> 0.
write: 'file can not be written'.
stop.
endif.
clear l_wa_final.
ENDLOOP.
CLOSE DATASET P_PREFIL.
if sy-subrc <> 0.
write: ' file cannot be closed'.
stop.
endif.

DATA:L_WA_FINAL TYPE TY_FINAL,
l_wa_string type string.
OPEN DATASET P_PREFIL FOR OUTPUT IN text mode encoding default.
if sy-subrc ne 0.
write: ' file cannot be opened'.
stop.
endif.
LOOP AT P_I_FINAL INTO L_WA_FINAL.
move l_wa_final to l_wa_string.
TRANSFER l_wa_string TO P_PREFIL.
write: 'file can not be written'.
clear l_wa_final.
ENDLOOP.
CLOSE DATASET P_PREFIL.
if sy-subrc ne 0.
write: ' file cannot be closed'.
stop.
endif.

Error when creating a new mailbox.

When I try to create a new mailbox I get the following error. Forest1.net is my domain name. exuser is the name of the new user account.
Summary: 1 item(s). 0 succeeded, 1 failed.
Elapsed time: 00:00:01
exuser
Failed
Error:
Load balancing failed to find a valid mailbox database.
Exchange Management Shell command attempted:
New-Mailbox -Name 'exuser' -Alias 'exuser' -UserPrincipalName '[email protected]' -SamAccountName 'exuser' -FirstName 'ex' -Initials '' -LastName 'user' -Password 'System.Security.SecureString' -ResetPasswordOnNextLogon $false
Elapsed Time: 00:00:01
Thanks and Regards, Radhakrishnan

Hi ,
Please verify the Information Store service is started.
Distribution Group and contacts both have no mailbox in information store. So you can create them.
And now, we may need to verify if the mailbox database is mounted and we can get its information.
The following similar issue for your reference.
Cannot execute Get-MailboxDatabase cmdlet:<//span>
http://social.technet.microsoft.com/Forums/en-US/exchangesvradmin/thread/a8022f91-5f91-4660-80d0-ac6d98cd787a/
By the way, do you choose which mailbox database you want to store when create mailbox ?
Wendy Liu
TechNet Community Support

When I create a new mailbox in mail.app, the mailbox does not appear in the list of mailboxes

I am trying to create a new mailbox in mail.app, but it never appears in the list of mailboxes. This USED TO WORK.

Without seeing anything of what you did there is not much to go on except to say that when you create a classic tween you use a library-based object and it has to exist at both ends of the tween. When motion guides come into play you usually have to fiddle around when making the link between the object and the motion guide to get the object to lock to it.

PS2013 - When creating a new instance of Project Server hangs in 'Waiting for resources' status

Hi,
I have one instance of Project Server 2013 fully operational and I tried to duplicate the instance to make some tests. As I know the issue of using the same Content Database of Project Server in the same Server Farm, I used the powershell backup/restore/dismount
and mount the content database to change the site IDs to avoid index duplication. The Project server database was a regular SQL backup and restore in another database.
I created a new Web App in the port 90 as show below.
Then I included the Content database of Project Server as separated DB from SharePoint for this new SharePoint -acme90 and I tried to create the new instance. The creation hanged in "Waiting for Resources" status.
To make another check excluding the reuse of the SharePoint-80 I tried to create another instance both in the SharePoint-80 where is the working instance and in the SharePoint-90, everything default and again they all hanged in Waiting for Resource.
If I try to create the instance using PowerShell I got the following error:
PS C:\Users\epm_setup> Mount-SPProjectWebInstance -DatabaseName Test_EPM -SiteCo
llection http://acme02/epm -Lcid 1046
Mount-SPProjectWebInstance : Cannot find an SPSite object with Id or Url:
http://acme02/epm.
At line:1 char:1
+ Mount-SPProjectWebInstance -DatabaseName Test_EPM -SiteCollection
http://acme02/ ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~
    + CategoryInfo          : InvalidData: (Microsoft.Offic...ountPwaInstance:
   PSCmdletMountPwaInstance) [Mount-SPProjectWebInstance], SPCmdletPipeBindEx
ception
    + FullyQualifiedErrorId : Microsoft.Office.Project.Server.Cmdlet.PSCmdletM
   ountPwaInstance
All SharePoint and Project Server services are running, all App Pools and sites are started at the IIS. I could not find a hanging timer job.
I cannot stop the hanged process or dismount the instances using Powershell since no instance created.
How should I solve the hanging status of creation of the instance? As they are in Hyper-V I can go back using one snapshot.
Thank you.
Best regards, Ricardo Segawa - Segawas Projetos / Microsoft Partner

Hi Eric,
Thank your for your interest in this case.
I checked for running and crashed PWA jobs and deleted all of them just after restoring the snapshot and tried to create the new instance in the new web app in port 90 (besides the existing and working instance in port 80), but again it hanged in "waiting
for resources". There is not any timer job hanging, no error in event viewer or in log. So the error is well before working with cloned dbs.
Answering your questiion, I am working all on 2013. My intention is backup one instance of the port 80 and copy to the instance of port 90, changing of course the url and the index of the content db of SharePoint. The process I used was:
Create a new web app in port 90, creating a new SharePoint_Content_2 on a
http://server:90 site.
Created the top level site called Portal using the Team Site template.
Create a new content db for new instance of Project Server named EPM_Content_2 using Central Admin.
Backup content db from port 80 instance of Project Server and restore to this EPM_content_2 using PowerShell cmd.
Dismounted and mounted this Project Server content db to create new index for existing sites to avoid index conflicts.
Backup the Project Server DB from port 80 using SQL backup and restored as ProjectWebApp2 db for port 90 instance.
Tried to create a new instance of Project Server
http://server:90/pwa on web app of port 90 using the ProjectWebApp2 db and using the same app pool of the other instance. But as in the previous case, it hang out in "Waiting for resources".
Best regards, Ricardo Segawa - Segawas Projetos / Microsoft Partner

How do you create a new mailbox folder on iPad?

How do you create a new mailbox folder on iPad?
step by step directions appreciated.
Thanks for the help.

THank you for this very prompt response.

My mailboxes have disappeared when I installed Yosemite, but if I try to create a new mailbox by that name, it says I can not because the mailbox already exists How do I get them to show up?

I upgraded mu iMac to Yosemite now my mailboxes don't show up in my mail. If I try to create a new mailbox with the same name, it tells me that that mailbox already exists. How do I get my mailboxes to appear?

The mailbox list is divided into categories with headings in caps, such as ON MY MAC. When you hover the cursor over one of those headings (except for MAILBOXES), you should see the word Show or Hide on the right. Click Show. The MAILBOXES category can't be hidden.
In each category, the mailboxes are arranged in groups, such as Inbox. To the left of each group is a small disclosure triangle. If the triangle points to the right, click it so that it points down.

How does Mountain Lion create a new mailbox?

I cannot create a new mailbox in Mountain Lion with either + or menu. Hints welcome.

I never did find a mailbox - I wasn't even able to name or position it. I finally quite Mail and restarted. For whatever reason, I was able to create a new mailbox. Thanks for your response, it encouraged me to look and try again.

Create a new mailbox in pop3 server

Similar Messages

Maybe you are looking for