Create a new request using T-CODE- OME4

Hi,
I want to transport the requests in production by dev->quality->production.The request is generated by modification in the purchase group using the TCODE- OME4 but the request no which is generated is already existing though I have selected the option of create new request.
Please suggest what is the solution for creating the new request no.

The purchase group are updated in development system by the TCODE OME4 after saving the changes  the window is popped up in which there  is the option of creating the new request .After generating of the request it is further released using se09 and transported to quality and production system through STMS.
But today when I clicked on the "create new request" the request no which appeared was already existing in the system.No new request no. was generated.
Moreover in oreder to import the requests using STMS I selected three options for the old requests as follows:
OPTIONS:
1) leave transport request in queue for later import
2)import transport request again
3)overwrite orginals
that's why there is the possibility of overwrriting it.
But now please suggest why the new request no is not generating and what can I do now whether I shuld overrite the old requests.

Similar Messages

  • How to create a new request for function group?

    Hi Friends,
    My client has changed their development server. Now all the objects in old DEV server are transfered to new one. Except for function group objects, we have created new change request number for all others. Now I need to create a new request for function group objects. Can anyone suggest which transaction code I have to use for this purpose?
    Thanks,
    Kaarthick.V

    Hi Karthick,
    If you want to Change the request for your FG means,
    1. Go to SE80 ->  work bench ->  Edit object.
    Here you have the option two change the request.
    or If you want to create the Function Group means,
    Go to SE80 -> Select Function Group -> Enter name -> press Enter
    Thanks,
    Reward If Helpful.

  • Problem while creating credit memo request using BAPI

    HI,
    I am trying to create credit memo request using the BAPI_SALESDOCU_CREATEFROMDATA1..
    I am getting the error as " No customer master data is available for the customer". But the customer exists in the KNA1 table. What is the mistake i hv done.. this s my code..
    REPORT  ZSV_CREDITMEMO_TEST1.
    Data declarations.
    DATA: v_vbeln            LIKE vbak-vbeln.
    DATA: header             LIKE bapisdhead1.
    DATA: headerx            LIKE bapisdhead1x.
    DATA: item               LIKE bapisditem  OCCURS 0 WITH HEADER LINE.
    DATA: itemx              LIKE bapisditemx OCCURS 0 WITH HEADER LINE.
    DATA: partner            LIKE bapipartnr  OCCURS 0 WITH HEADER LINE.
    DATA: return             LIKE bapiret2    OCCURS 0 WITH HEADER LINE.
    DATA: lt_schedules_inx   TYPE STANDARD TABLE OF bapischdlx
                             WITH HEADER LINE.
    DATA: lt_schedules_in    TYPE STANDARD TABLE OF bapischdl
                             WITH HEADER LINE.
    DATA: lt_schedules_ink    TYPE STANDARD TABLE OF bapisdhead1
                             WITH HEADER LINE.
    START-OF-SELECTION.
    Header data
    Sales document type
      header-doc_type = 'G2'. 
      headerx-doc_type = 'X'.
    Sales organization
      header-sales_org = '0001'.
      headerx-sales_org = 'X'.
    Distribution channel
      header-distr_chan  = ''.
      headerx-distr_chan = 'X'.
    Division
      header-division = ''.
      headerx-division = 'X'.
      headerx-updateflag = 'I'.
    *Complete delivery
        header-COMPL_DLV = ''.
        header-COMPL_DLV = 'X'.
    Partner data
    Sold to
      partner-partn_role = 'AG'.
      partner-partn_numb = '0000C10130'.
      APPEND partner.
    Ship to
      partner-partn_role = 'WE'.
      partner-partn_numb = ''.
      APPEND partner.
    ITEM DATA
      itemx-updateflag = 'I'.
    Line item number.
      item-itm_number = '000010'.
      itemx-itm_number = 'X'.
    Material
      item-material = 'C20011'.
      itemx-material = 'X'.
    Plant
      item-plant    = ''.
      itemx-plant   = 'X'.
    Quantity
      item-target_qty = '10000'. 
      itemx-target_qty = 'X'.
    item category
      itemx-ITEM_CATEG = 'X'.
      APPEND item.
      APPEND itemx.
      Fill schedule lines
      lt_schedules_in-itm_number = '000010'.
      lt_schedules_in-sched_line = '0001'.
      lt_schedules_in-req_qty    = '10000'.
      APPEND lt_schedules_in.
      Fill schedule line flags
      lt_schedules_inx-itm_number  = '000010'.
      lt_schedules_inx-sched_line  = '0001'.
      lt_schedules_inx-updateflag  = 'X'.
      lt_schedules_inx-req_qty     = 'X'.
      APPEND lt_schedules_inx.
    Call the BAPI to create the sales order.
      CALL FUNCTION 'BAPI_SALESDOCU_CREATEFROMDATA1'
           EXPORTING
                sales_header_in     = header
                sales_header_inx    = headerx
           IMPORTING
                salesdocument_ex    = v_vbeln
           TABLES
                return              = return
                sales_items_in      = item
                sales_items_inx     = itemx
                sales_schedules_in  = lt_schedules_in
                sales_schedules_inx = lt_schedules_inx
                sales_partners      = partner.
    Check the return table.
      LOOP AT return WHERE type = 'E' OR type = 'A'.
        EXIT.
      ENDLOOP.
      IF sy-subrc = 0.
        WRITE: / 'Error in creating document'.
      ELSE.
    Commit the work.
        COMMIT WORK AND WAIT.
        WRITE: / 'Document ', v_vbeln, ' created'.
      ENDIF.
    can anyone tell what the error is.?

    Hi
    please look at code below code this succefully creating credit memo may some help to you
    header-doc_type = 'ZS4'.
        PERFORM get_plant.
        headerx-doc_type    = 'X'.
        header-sales_org    = wa_temp1-vkorg.
        headerx-sales_org   = 'X'.
        header-purch_no     = wa_temp1-bstnk.
        header-distr_chan   = wa_temp1-vtweg.
        headerx-distr_chan  = 'X'.
        header-division     = wa_temp1-spart.
        header-purch_no_s   = wa_temp1-bstnk.
        headerx-division    = 'X'.
        wa_partner-partn_role = 'AG'.
        wa_partner-partn_numb = wa_temp1-kunnr.
        APPEND wa_partner TO it_partner.
        wa_partner-partn_role = 'WE'.
        wa_partner-partn_numb = wa_temp1-kunnr.
        APPEND wa_partner TO it_partner.
        CLEAR: wa_partner.
        LOOP AT lt_temp2 INTO wa_temp2 WHERE kunnr = wa_temp1-kunnr.
          "AND matnr = wa_temp1-matnr.
    *wa_item-itm_number = wa_temp2-posnr .
          wa_item-material   = wa_temp2-matnr.
          wa_item-plant      = wa_temp2-werks.
          wa_item-req_qty    = wa_temp2-fkimg * 1000.
          wa_item-target_qty = wa_temp2-fkimg * 1000.
          APPEND wa_item TO it_item.
        ENDLOOP.
        CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT1'
          EXPORTING
            order_header_in       = header
    *   WITHOUT_COMMIT            = ' '
    *   CONVERT_PARVW_AUART       = ' '
         IMPORTING
           salesdocument          = v_vbeln
    *   SOLD_TO_PARTY             =
    *   SHIP_TO_PARTY             =
    *   BILLING_PARTY             =
           return                 = return
          TABLES
           order_items_in         = it_item
           order_partners         = it_partner.
        IF v_vbeln <> space.
          wa_vbeln-vbeln = v_vbeln.
          APPEND wa_vbeln TO lt_vbeln.
          CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
            EXPORTING
              wait = 'X'.
          HIDE wa_vbeln-vbeln.
          CLEAR: wa_partner,header,v_vbeln, wa_temp2.
          REFRESH: it_partner,it_item.
        ELSE.
    *    LOOP AT return .
          it_error-srno = idx.
          it_error-err_msg = return-message.
          APPEND it_error.
    *    ENDLOOP.
        ENDIF.
        idx = idx + 1.
      ENDLOOP.
    Regards

  • How to create a new component using SPICE?

    People, I don't know how to create a new component using SPICE.
    I know that it's possible to create a new component and use a SPICE code, but I don't know how to do this very well, and I need the TI ISO124 (Isolation Amplifier), and I have no idea on how to do that. Can somebody help me? I need to develop a layout.
    Thank you!!

    Hi,
    Here is a tutorial that explains in details how to create your own component in Multisim using a SPICE model.
    Hope you find it helpful,
    Mahmoud W
    National Instruments

  • Create credit memo request using inbound IDOC

    Hi Experts,
    I want to create credit memo request using inbound IDOC, currently I am using GSVERF03 basic type and process code GSVE, I am getting below error:
    No records exist in T661W for vendor XXXXX, plant, unloading point
    Anyone suggest me is this correct message type to create credit memo request or suggest me the correct one. because we are working with customer sales order and invoice not with vendor purchase order.
    Thanks for your help.

    ah, apologies i read outbound! I think you are using the correct message type i.e. GSVERF.
    Can you not simply create the missing entry in T661W? i.e. for the missing records?

  • How can I create a new label using Pages and Avery Labels products?

    How can I create a new label using Avery LAbels and PAges on an imac?

    Contacts prints to Avery labels.
    Otherwise just open the appropriate Word template from Avery's website, in Pages.
    Peter

  • Creating a new document using XQuery

    Hello everyone,
    I wondered if there was a way to create a new document using XQuery. What I am trying to do is to run a query on XML file and try to print the results in HTML for viewing purpose.
    The HTML is spitted out on DOS prompt. Instead I wanted to write that HTML to a file on disk. Is this possible with the XQuery tools provided by Oracle?
    Thanks in advance for all the help
    K

    Folks,
    Kinda answering to my question. Just send the DOS output to some file. Pretty Simple huh!
    Thankyou anyways
    K

  • Creating a New Layer Using Icons in Adjustment Palette

    When creating a new layer using the icons in the adjustments palette and holding ALT in CS5 a dialog box would appear before creating the new layer.  At this point you could rename the layer change the blending mode etc.
    In CS6 I do not get the dialog box to appear the new layer is just created.  I've tried to reset my preference twice and this has not help. Any ideas?

    JJMack wrote:
    Your memory has failed
    On the contrary, your memory may have failed.
    ACJ81 is correct (at least as far as Ps on OS X is concerned) and the problem was mentioned in the forum not too long ago. In CS5, Alt-clicking an icon in Adjustments panel does cause a New Layer dialog to pop open and the dialog fails to appear in CS6.
    In CS6 and CS5, the dialog will appear if you pick an Adj Lyr from the Layer > New Adjustment Layer submenu, both with or without Alt modifier. (That lack of control over the appearance of an optional dialog when picking from a menu is an inconsistency in the interface.)
    In CS6 and CS5, the dialog will appear if you Alt-click the black and white circle at bottom of Layers panel then pick an Adj Lyr from the menu, as Noel said.

  • I wanted to send some photos out but was told I need to create a new profile, use mail icon in control panel no icon there how do I get it done?

    I want to send some photos from Firefox, when I tried it said I need to create a new profile, use mail icon in control panel. I went to control panel and do not know what to do.'''bold text'''

    As all of the msuic came from your computer in the first place it should still be there.  Is it not?
    EVERYTHING on your ipod should also be on your computer and should be included in your regular backup copy of your computer.
    Make sure that everything is on your computer.  You can transfer itunes purchases from the ipod.  Without syncing:  File>Transfer Purchases.
    When everything is on your computer, then it can be synced back to the ipod after updating.

  • How to create a new material using a BAPI?

    Dear friends,
    How to create a new material using a BAPI? I mean without knowing the material no., how to just create a new one using function modules(BAPI)?
    Thanks a lot!

    Dear,
    New material can be created by using a BAPI_MATERIAL_SAVEDATA.
    More over their are lots of threads available on SDN on the question you raised so kindly search the SDN before posting any thread .
    Cheers
    fareed

  • Selecting an object fails when creating a new dashboard using the 'New Dashboard and Widget Wizard'

    Hi,
    I am using SCOM 2012 SP1
    I have recently been experiencing an issue when trying to create a new dashboard using the wizard. I get to the step where you select a group or object to add to the  Scope and Counters section. When I try to search for a particular object such as a
    port or interface it times out and returns an error. The error is shown below:
    Please provide the following information to the support engineer if you have to contact Microsoft Help and Support :
    Microsoft.EnterpriseManagement.Presentation.DataAccess.DataAccessDataNotFoundException: Exception reading objects ---> Microsoft.EnterpriseManagement.Common.UnknownDatabaseException: The query processor ran out of internal resources and could not
    produce a query plan. This is a rare event and only expected for extremely complex queries or queries that reference a very large number of tables or partitions. Please simplify the query. If you believe you have received this message in error, contact Customer
    Support Services for more information.
       at Microsoft.EnterpriseManagement.Common.Internal.ServiceProxy.HandleFault(String methodName, Message message)
       at Microsoft.EnterpriseManagement.Common.Internal.EntityObjectsServiceProxy.GetManagedEntitiesByManagedEntityTypesAndCriteriaWithInstanceQueryOptions(IList`1 managedEntityTypeIds, IList`1 managedEntityBaseTypeIds, IList`1 criterias, String
    languageCode, InstanceQueryOptions instanceQueryOptions)
       at Microsoft.EnterpriseManagement.InstancesManagement.GetObjectsReaderInternal[T](ICollection`1 criteriaCollection, ObjectQueryOptions queryOptions)
       at Microsoft.EnterpriseManagement.Management.DataProviders.ManagedEntityProvider.GetManagedEntitiesByClass(ICollection`1 baseTypeNames, String criteriaString, List`1 valueDefinitions, List`1 sortValueDefinitions, Int32 maxEntities, String typePropertyName,
    String typeWithIconPropertyName, Boolean propertyCollectionRequested)
       --- End of inner exception stack trace ---
       at Microsoft.EnterpriseManagement.Presentation.DataAccess.DataProviderCommandMethodInvoker.Invoke()
       at Microsoft.EnterpriseManagement.Monitoring.DataProviders.RetryCommandExecutionStrategy.Invoke(IDataProviderCommandMethodInvoker invoker)
       at Microsoft.EnterpriseManagement.Presentation.DataAccess.DataProviderCommandMethod.Invoke(CoreDataGateway gateWay, DataCommand command)
       at Microsoft.EnterpriseManagement.Presentation.DataAccess.CoreDataGateway.ExecuteInternal[TResult](DataCommand command)
       at Microsoft.EnterpriseManagement.Presentation.DataAccess.CoreDataGateway.<ExecuteAsync>b__0[TResult](<>f__AnonymousType0`1 data)
    It appears to be complaining about internal resources, but we have not experienced this issue before and both the management and SQL servers have plenty of resource. The databases are held on a seperate dedicated sql server and I have noticed that when I
    try to search for the object, the sqlservr.exe process immediately consumes 50% CPU while the query is running. As soon as it ends (errors) the sqlservr process drops back to a reasonable number.
    No changes have been made to either the management server or sql server. We were able to create dashboards one day, but then recieved this error the next.
    Has anyone else seen this issue? or can anyone explain what is happening?
    Many thanks

    Hi,
    Asposted earlier,hadt he same problem
    when creating a Dashboard widget type
    State.
    Ones olution I found for this was as follows:
    When creating the State widget,the option
    to specify the criterion I left blank
    and finished the creation of the dashboard.
    With that managed to solve the problem.Of course this
    is not the solution, or the root cause
    of the problem.
    I will examine more about this issue, and sohave
    the ultimate solution and why such behavior,I post
    here.
    thank you
    Wilsterman Fernandes

  • Creating a new database using an MDF file

    My database saves as MDF. I want to know what are the steps to restore or create a new database using a MDF file? I tried to restore as usual but it shows an error. Please help.

    An MDF file isn’t a backup file isn’t the main data file (or master data file depending on who you ask) hence the file extension MDF. You can attach the MDF to the database by right clicking on the databases folder in Enterprise Manager (SQL 2000) or Management
    Studio (SQL 2005) then selecting all tasks and then Attach Database. When you do this you will get an error about the log file missing. This shouldn’t matter as SQL Server will simply create a new log file for you. This will only work if the SQL Server was
    stopped when you copied the MDF file from the old SQL Server. If you copied the file while the SQL Server was running this file probably will not attach either and you will need to get a valid backup of the database.
    Download help tool for sql database - SQL Server Restore Toolbox.
    http://www.sqlserver.restoretools.com/
    You can read up more on SQL Server here.
    http://www.filerepairforum.com/forum/microsoft/microsoft-aa/sql-server/498-creating-a-new-database-using-an- mdf-file?_=1416149856104

  • When I create a new cube using another cube as template which datasource i

    Hi,,
    When I create  a new cube using another cube as template(copy) which datasource is assigned to the new cube, why because am getting all the fields which are there in copied cube even though I used only required fields.why this is occuring?
    Thanx in advance,
    Ravi

    Hi,
    Usually, when you copy the cube only data model is copied. means all KF and CHAR, NAV CHAR.
    May be after copying you can reassign (CHARS) once again in the New cube as per your requirement.
    When you create the update rules, there you can assign the Infosource or original cube as datasource.
    may help...
    Vis

  • Creating a new request in a servlet and proxy it to the next service

    Hello all.
    My scenario is the following:
    - I have a service that when I receive a message request from a user it creates another request and then I want to proxy this new request to the next service.
    - Is this possible to do? I'm not talking about using the request.send() method since it tries to send the new request outside the OCMS, I was thinking more of the proxy.proxyTo() method...

    Hi Lucas and thanks for the reply.
    I think my problem is DNS related. I don't know why but the following code stop to work properly when I installed a new OCMS instance with a diferent realm (I was using example.com and now I'm using the same domain as my company, novabase.pt). I put "172.18.88.21 novabase.pt" in the hosts.config file and the only thing that stopped working is the creation of new requests within the SipServlet.
    The code:
    SipApplicationSession applicationSession =
    req.getApplicationSession();
    Address to = req.getTo();
    Address from =
    getSipFactory().createAddress(convertMobile2Address(req.getFrom()));
    SipServletRequest request =
    getSipFactory().createRequest(applicationSession, "MESSAGE",
    from, to);
    Object content = req.getContent();
    String contentType = req.getContentType();
    request.setContent(content, contentType);
    from.setDisplayName(req.getFrom().getDisplayName());
    request.setHeader("P-Asserted-Identity",
    req.getTo().getURI().toString());
    System.out.println(request);
    request.send();
    SipServletResponse response =
    req.createResponse(200, "Enderecos trocados!");
    response.send();

  • Creating self registration request using OIM API

    Hi guys,
    When we try to create a self regisrtation request using OIM API , we ge the following exception:
    We get this error when we set the following in Design console.
    Does user have to provide challenge information during registration = FALSE
    and passed an blank object in place of challenge question parameter in createSelfRegistrationRequest method in tcUtilityBaseClass.
    19:22:17,218 ERROR [REQUESTS] Error: Failed to save REQ_CONSOLIDATED_DATA_VALUE
    data for Create Entity.
    java.lang.NullPointerException
    at org.apache.xml.serializer.TreeWalker.dispatachChars(TreeWalker.java:2
    44)
    at org.apache.xml.serializer.TreeWalker.startNode(TreeWalker.java:414)
    at org.apache.xml.serializer.TreeWalker.traverse(TreeWalker.java:143)
    at org.apache.xalan.transformer.TransformerIdentityImpl.transform(Transf
    ormerIdentityImpl.java:389)
    at com.thortech.xl.dataobj.util.RequestDataConsolidator.convertNodeToXML
    (Unknown Source)
    at com.thortech.xl.dataobj.util.RequestDataConsolidator.addUser(Unknown
    Source)
    at com.thortech.xl.dataobj.tcDataBase.createRequestForCreateEntity(Unkno
    wn Source)
    at com.thortech.xl.dataobj.tcDataBase.createRegistrationRequest(Unknown
    Source)
    at com.thortech.xl.dataobj.tcDataBase.createRegistrationRequest(Unknown
    Source)
    at com.thortech.xl.ejb.beansimpl.tcUnauthenticatedOperationsBean.createR
    egistrationRequest(Unknown Source)
    at com.thortech.xl.ejb.beans.tcUnauthenticatedOperationsSession.createRe
    gistrationRequest(Unknown Source)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
    java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
    sorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at org.jboss.invocation.Invocation.performCall(Invocation.java:359)
    at org.jboss.ejb.StatelessSessionContainer$ContainerInterceptor.invoke(S
    tatelessSessionContainer.java:237)
    at org.jboss.resource.connectionmanager.CachedConnectionInterceptor.invo
    ke(CachedConnectionInterceptor.java:158)
    at org.jboss.ejb.plugins.StatelessSessionInstanceInterceptor.invoke(Stat
    elessSessionInstanceInterceptor.java:169)
    at org.jboss.ejb.plugins.CallValidationInterceptor.invoke(CallValidation
    Interceptor.java:63)
    at org.jboss.ejb.plugins.AbstractTxInterceptor.invokeNext(AbstractTxInte
    rceptor.java:121)
    How do we create a self registration request , using OIM API , with and without challenge questions?

    Well try this piece of code. This might be similar to yours but it worked perfectly for me. For you the error might be the attribute names which you are passing, it should be the one dfined in the FormMetaData xml as below.
         import Thor.API.tcUtilityFactory;
         // define you class below
         ConfigurationClient.ComplexSetting config = ConfigurationClient.getComplexSettingByPath("Discovery.CoreServer");
         final Hashtable env = config.getAllSettings();
         Hashtable quesAns = new Hashtable();
         HashMap user = new HashMap();
         user.put("Users.User ID", "SelfTesting");
         user.put("Users.First Name", "SelfTesting");
         user.put("Users.Last Name", "SelfTesting");
         user.put("Users.Email", "[email protected]");
         user.put("Users.Password", "SelfTesting");
         user.put("ConfirmPassword", "SelfTesting");
         tcUtilityFactory.createRegistrationRequest(env, user, quesAns);
    And for the query of challenge QnA, these are the following combinations possible:
    1) Property Does user have to provide challenge information during registration set to TRUE
    - During self-registration from web console, it will show you Challenge Questions section on the right. If you do not select any questions, it will thow you an error there itself.
    - Doing it from API will create no difference(even if you pass a blank HashTable). The request will be created successfully and on completion when the user tries to login, it will ask for Security QnA.
    2) Property Does user have to provide challenge information during registration set to FALSE
    - During self-registration from web console, it doesn't show you Challenge Questions section on the right. The request will be created successfully and on completion when the user tries to login, it will ask for Security QnA.
    - Doing it from API, you will have to pass a blank HashTable as in above code. The request will be created successfully and on completion when the user tries to login, it will ask for Security QnA.
    Hope it works.
    Thanks
    Sunny

Maybe you are looking for