Create a program that can be monitored by JCmon

Hi,
I'd like to use JCmon to monitor (start-stop) a program of mine.
May anyone tell me what is needed? (implement interfaces, create configuration files...)
Regards
Yann

no, the headers, here's a picture of the headers on this page. When I use SEO for Firefox, it sees them on every other page but never on my iweb sites.
Quickpost this image to Myspace, Digg, Facebook, and others!

Similar Messages

  • Hello, I trying to create a program that would run a household furnace. I can't find a way to set timers for the ignitor,flame sensor and blowers. Any thoughts.

    Hello, I'm trying to create a program that would run a household furnace. I can't find a way to set timers foe the ignitor,flame sensor and blowers. Any thoughts would be greatly appreciated. Thanks, primetime

    In the detailed help for the event structure there is a link to caveats and recommendations for using event structures.  It is a good starting point.
    It is courteous to let the Forum know when your questions are related to a school assignment or homework.  We are glad to help you learn LabVIEW, but do not do your homework for you.
    You have learned the major disadvantage of the sequence structure: It must run to completion before anything else can happen.
    If you are building a state machine (typically a while loop with shift registers enclosing a case structure with one case per state) and having trouble with timing, then think about your requirements. Apparently you have some time delays, but under certain conditions you must terminate a delay/wait and do something else.  One way of doing this is to have a Wait state.  The wait state has a short delay, determined by the minimum time you can delay responding to a changed condition, and a check to see if the required elapsed time has occurred.  If the time has not elapsed, the next state is the Wait state again.  The state machine can repeat any state as often as necessary.  So a 15 second delay could be implemented by going to a Wait state with a one second wait 15 times. Any error or new command will see a response in no more than one second.
    Lynn

  • I would like to make a poker program that can be played over the internet

    I would like to create a java poker program that can be plyed over the internet. I would post the code on a website and everyone that goes should be able to play. Someone told me to use a socket but i dont no how. Also i dont know how to make a program that many people can use at once. PLEASE HELP ME!!!!!!!!!!!!!!!!!!!!!!!!! So i want to make a holdem poker program in black and white that like 6 people can play by going to a web site. Thanks

    I would like to create a java poker program that can
    be plyed over the internet. I would post the code on
    a website and everyone that goes should be able to
    play. Someone told me to use a socket but i dont no
    how. Also i dont know how to make a program that
    many people can use at once. PLEASE HELP
    ME!!!!!!!!!!!!!!!!!!!!!!!!! So i want to make a
    holdem poker program in black and white that like 6
    people can play by going to a web site. ThanksIf you want to use a socket, you're on the wrong board. What does your webhoster support? J2EE? Root access so you can install your own server?

  • Whats the best software for photo editing and creating product catalogues that can be saved as PDF's

    Whats the best software for photo editing and creating product catalogues that can be saved as PDF's

    You are asking two different questiions:
    1. What's a good photo editor? Answer to that here is probably obvious.
    2. What's a good desktop publishing/page layout program for creating PDF files for production? Answer, not PSE. It's a photo editor, not a page layout program.

  • I want to write a java program that can add a user to a role or sub role to the Profile Database in iPlanet Portal Server 3.0. Does anyone has any idea or a sample program do such thing. Thanks, Tommy

    I want to write a java program that can add a user to a role or sub role to the Profile Database in iPlanet Portal Server 3.0. Does anyone has any idea or a sample program do such thing? Thanks, Tommy

    // create the user profile, get the handle back,
    // and set the membership profile attributes.
    ProfileAdmin newProfile = null;
    try {
    // the users profile name is the domain      
    // he belongs to plus their userName
    // you will request.domain if your doing this from a servlet, domain_name is the domain_name the user belongs too
    String profileName = domain_name + "/" + user;
         if (debug.messageEnabled()) {
    debug.message("creating profile for " + profileName);
    // create the user profile object
    newProfile = ProfileManager.createProfile(
    getSession(), profileName ,Profile.USER);
    UserProfile userProfile = (UserProfile)newProfile;
         // set the role the user is a member of. Default is to set
         // the users to the default role of the domain they surfed to
         StringBuffer roleName = new StringBuffer(64);
    // request.domain instead of domain_name if your doing this from a servlet ..
    Profile dp = getDomainProfile(domain_name);
    roleName.append(dp.getAttributeString("iwtAuth-defaultRole"));
         if (debug.messageEnabled()) {
    debug.message("setting role for " + user + " = " + roleName);
    userProfile.setRole(roleName.toString());
    newProfile.store(false);
    } catch (ProfileException pe) {
         debug.error("profile exception occured: ",pe);
    return;
    } catch (ProfileException pe) {
         debug.error("login exception occured: ",le);
    return;
    HTH ..

  • Is there a program that can open .desktop icons?

    Hi.
    I am 15 years old and have downloaded a game thats called Planetside 2 with the program wine and winebottler. It installed perfectly and leaved a icon thats named Planetside2.PSG.desktop. I didn't exit the window until the planetside 2 have uploaded everything. After one day I decided to play Planetside 2 but I couldn't open that icon. Not even my winebottler couldn't open it. Is there a way or a program that can open that. (I do not want any suggestions buy virtual machines because I don't have a disk reader that can run cd´s).
    The way I did it.
    1. Installed Planetside 2
    2. Created a desktop icon for shortcut. (There also came a sort of document Planetside2.PSG.ink)
    3. Waited Planetside 2 to upload ( I went about 3 hours so I went to bed).
    4. Next morning, tried to use the shortcut (Planetside2.PSG.desktop) to launch it.
    5. Searching if there was anything more installed in the computer and I couldn't find anything except that desktop icon.
    Well there is one opertuntity that works but it takes a LONG time because I have to install it again and click the repear option to even open Planetside 2.
    My computer is a Macbook air with operating system OS X 10.8.4. (its not mountain lion but it was no more option).

    Thanks, I should talk to the support and now I know where my game is! I had the problem to find Planetside was one of the problems and it was in a windows c:drive that is almost impossible to find (Spotlight and Finder searches doesn't work). But I found a program that can find EVERY single program which is OmniDiskSweeper. It calculates every folders and programs size and lays a display on how much spaces it takes on your computer. If anyone have problem to find the windows C:drive I can guide you like this:
    Machintosh HD>Users>Your computer name (Which would take a lot of gbytes)>Library(Its probably here the folder Library doesn't show up)>Application Support>com.yourcompany.yourapp.??>there is your windows c:drive!
    Maybe in some computers it doesn't work but it worked for me how I found my C:drive. I was using a program called wine so that maybe explains the dissapering. Wine laid it on the C:drive.

  • Create a program that recognizes the human face , any API or idea?

    Hi , I try to create a program that recognizes the human faces, taking images from a webcam , but i don´t know how do it , any API or idea?

    shays wrote:
    sabre150 wrote:
    malcolmmc wrote:
    Don't be so negative.I can never understand why negative realism should be so looked down upon. I also can't understand why verbal abuse is looked down on when it can be taken so constructively. In fact I feel the same about physical abuse, why do people shy away from it when it clearly shows how we really feel. Who needs courtesy, it doesn't do anyone any good. And lets take off the turn signal on cars, I don't need some light to tell you that I am about to cut you off. And we should definitely use the car horn more often. Any time I see an ugly car I get right behind them and lay on the horn. What's wrong with that. ; )So you want me to be unrealistic? So you want me to be upbeat about the OP's chance of creating a face recognition program? So if I see you about to jump off a cliff you want me to say - go for it, it won't hurt much, you will gain much from the experience?
    And where was this verbal abuse? In reply #4 I was sarcastic (as you are in your post) but to my mind not abusive. In reply #6 I was critical of the OP's approach but to my mind not abusive.
    Get real.

  • How to create a program that accepts 5 digits from the user between 0 and 9

    how to create a program that accepts 5 digits from the user between 0 and 9 then put them in ascending order using link-list method..

    You can use a scanner to get user input from the command line.
    import java.util.*;
    public class Test {
        private List<Integer> list;
        private Scanner in;
        public static void main (String... args) {
            new Test ();
        public Test () {
            list = new LinkedList<Integer> ();
            in = new Scanner (System.in);
            for (int i = 0; i < 5; i ++) {
                System.out.format ("Please enter a number (%d more): ", (5 - i));
                list.add (in.nextInt ());
            Collections.sort(list, new Comparator<Integer> () {
                public int compare (Integer i1, Integer i2) {
                    return i2 - i1;
            System.out.println (list);
    }

  • Simple question. Since apple has extinguished iDVD Are there any other Software programs that can produce the end product iDVD did?

    There are many a thousands of people who are producingvideos on completed DVDs. As an amateur videographer using iMovie first nowusing Final Cut pro to produce completed ready to distribute DVDs, I find ithard to believe at the meeting you mentioned anyone with common sense wouldhave explained the scenario above. On an amateur level so many folks have beencreating videos of Weddings, Home Movies, and many different Special Events. Onin particular are sports events. I shoot a sports event like Mix Martial ArtsEvents utilizing several video cameras. Then editing with Final cut Pro andsometimes iMovie. All of my completed videos that have been edited in either ofthese two programs are shared (like hand in glove) with iDVD. Short of steppinginto the commercial world Apple has deleted many people from producing a semiprofessional looking product.
    I do not know if the can be answered here in the format buthere it goes!!
    Simple question. Since apple has extinguished iDVD Are thereany other Software programs that can produce the end product iDVD did? Googlesearches with years of outdated info does not give good references. Withoutlooking to go commercial, the Apple Macintosh Computers built internal Softwareprogram like iDVD is the only program I know of that can help folks on mylevel!!
    It doesn't seem there are any programs that takes off fromwhere iDVD left off. My end products (complete videography from start tofinished printed and burned DVD) needs to have the mapping and control usingthe semi professional look iDVD gave!
    Have any ssuggestions?

    Thank you Klaus 1
    I have 4 latest Macs All have iDVD. The question was not where to get iDVD.
    The question for anyone who knows is: Since apple has extinguished iDVD Are there any other Software programs that can produce the end product iDVD did?
    I appreciate your input but it realy does not answer the question. iDVD will soon not be able to work with newer versions of Macs as it has been left behind by Apple!
    Once again:
    It doesn't seem there are any programs that takes off from where iDVD left off.
    My end products needs to have the mapping and control using the semi professional look iDVD gave me.
    Imovie cannot do this. More importantly imovie cannot save the project to Video_TS folders like iDVD did.
    Anyone have suggestions?
    My full post is just below:
    There are many a thousands of people who are producing videos on completed DVDs. As an amateur videographer using iMovie first now using Final Cut pro to produce completed ready to distribute DVDs,
    On an amateur level so many folks have been creating videos of Weddings, Home Movies, and many different Special Events. One in particular are sports events. I shoot sports event like Mix Martial Arts Events utilizing several video cameras. Then editing with Final cut Pro and sometimes iMovie. All of my completed videos that have been edited in either of these two programs are shared (like hand in glove) with iDVD. Short of stepping into the commercial world Apple has deleted many people from producing a semi professional looking product.
    I do not know if anyone can this question but here it goes!!
    Simple question. Since apple has extinguished iDVD Are there any other Software programs that can produce the end product iDVD did? Google searches with years of outdated info does not give good references. Without looking to go commercial, the Apple Macintosh Computers built internal Software program like iDVD is the only program I know of that can help folks on my level!!
    It doesn't seem there are any programs that takes off from where iDVD left off. My end products (complete videography from start to finished with printed and burned DVD) needs to have the mapping and the control by using the semi professional look iDVD gave!
    More importantly imovie cannot save the project to Video_TS folders like iDVD did. Something for folks like myself who need this to burn to our multi burning DVD all in one printers!!
    Anyone have suggestions?

  • Looking for a program that can handel import and export of palm doc files

    I am looking for a program that can handel the import and export of palm doc Files that can convert them to to either txt or RTF files for Vista 32, running Palm Desktop 7.1.
    Could anyone give me a few suggestions of any plug-ins that would be good me?
    Hearns
    Post relates to: Palm IIIxe
    This question was solved.
    View Solution.

    Ok, you need to clean uninstall Palm desktop 6.2. Install Palm desktop 4.1.4 and download and install documents to go version 6.
    Here are the clean uninstall instructioins for Vista.
    You should first make a copy of your data to have just in case something
    happens. You can find your data files by going to Start --> Documents -->
    Palm OS Desktop. Highlight your Palm Desktop username and right click and
    copy. Then go to your PC desktop right click on a blank spot and select paste.
    If this is the first time you are installing Palm desktop and encountering a problem, skip the previous step.
    Now you want to uninstall Palm Desktop and remove everything that has to do
    with Palm Desktop from your computer.
    Go to the following locations on the PC and delete the folders listed below.
    C:\Program Files\Palm or Palm One
    C:\Users\[Vista Login Name]\appdata\local\virtualstore\Program Files\Palm or
    PalmOne
    C:\Users\[Vista Login Name]\appdata
    *Note you may need to view hidden folders to get to appdata. To do that go
    into your control panel and open folder options. Go to view tab and uncheck
    hide hidden files.
    Once this is done you will need to delete some registry keys from your PC Operating System.
    Word of warning, going here and deleting the wrong thing can cause your PC
    from starting up, crashing and deletion of programs and data. If you feel
    you are unsure of yourself, see if you have a friend that can help you or a
    PC technician that you can pay to help you. This procedure will show them everything they need to delete. To make sure we have a good copy of the current registry, we need to do a backup of the Registry.
    Go to start on the PC, in the search field type "regedit.exe" without quotes.
    Highlight COMPUTER, go to File --> Export. Should pop up with a Save As box.
    Current location is fine, should be in My Documents or save to a location you will remember. In the file name on the bottom type "backup[todaysdate]" i.e. backup07072008. Next, the hard part.
    The easiest way to make sure your working with the correct key, highlight the key i.e. palm quick install, and press delete on your keyboard. It will ask you, are you sure. Say yes. Do the same thing for all keys below.
    If you make a mistake, stop what you are doing. And call a PC technician.
    BUT do not turn off your computer.
    The reg keys are as follows (Note: some of theses reg keys will not be here
    but if they are delete them)
    * HKEY_CURRENT_USER\Software\U.S. Robotics\Palm Quick Install
    * HKEY_CURRENT_USER\Software\U.S. Robotics\PalmOne File Transfer
    * HKEY_CURRENT_USER\Software\U.S. Robotics\Pilot Desktop
    * HKEY_CURRENT_USER\Software\Palm
    * HKEY_CURRENT_USER\Software\Palm, Inc.
    * HKEY_CURRENT_USER\Software\PalmDesktopAutorun
    * HKEY_CURRENT_USER\Software\palmOne
    * HKEY_CURRENT_USER\Software\PalmSource
    * HKEY_LOCAL_MACHINE\Software\PalmSource or anything else that says palm
    Next reboot your computer.
    Then reinstall your palm desktop from the CD and do a hotsync. Use the username that is on the handheld.

  • How to create a user that can login the LDAP?

    I want to create a user that can login the OID/LDAP. I know how to create a user, it is allowed to login OIDDAS, but I also want the user to grant access to ldap directly. How do i do that?
    And how can I give it read rights and or update/delete rights on a specific tree?
    Regards
    Eelco

    Eelco,
    did you see the OiD developers guide? Here you find some examples how to create users in OiD using pl/sql or java.
    http://download-west.oracle.com/docs/cd/A97329_03/manage.902/a95193/smplcode.htm#637294
    how to use directory access control can be found in
    http://download-west.oracle.com/docs/cd/A97329_03/manage.902/a95192/access.htm#1054232
    --Olaf

  • Any suggestions for programs that can convert mpeg1 to a format that can be edited in iMovie Version 8.0.6 (821) and/or iMovie HD Version 6.0.3 (267.2) Thanks

    Any suggestions for programs that can convert mpeg1 to a format that can be edited in iMovie Version 8.0.6 (821) and/or iMovie HD Version 6.0.3 (267.2) Thanks

    Hi Mark
    Was just looking for the answer to this exact question and I just found something that worked for me so don't know if it might be of use to you or you might have already solved your problem!  Basically when I was in iMovie and I clicked to import movies from the computer into iMovie and I found the clip I wanted to import, there are a few options.  I think it asked which Event I wanted to add it to but most importantly it asked me what file size I wanted...I had originally been clicking Large because it advised me to because it reduces the file size...but just on a chance there I selected 'Full - Original' for size and it imported perfectly into iMovie in it's original vertical form!
    Hope this helps!
    Bianca

  • I need a program that can tell me the amount of bandwidth used by each host

    Dear Friends
    I need a program that can tell me the amount of bandwidth used by each host on the network in kb/s or mb/s.
    And if possible which would also records a history of use,
    what is the best program for this?
    Thanks
    Almir

    Hello friend,
      you can solve your problem with a netflow technology.NetFlow exports packets
    with information about your data flows going throught your routers or switches.
    (Usually src/dst IP address, src/dst ports, protocols, src/dst interfaces, num
    of bytes, num of packets). In the analyzator software you can see exactly what
    you need. See: http://www.cisco.com/go/netflow for more information about netflow.
    NetFlow is NOT supported on all devices, but almost devices support it. The list of
    supported devices can be found on the: http://support.caligare.com/kb/entry/42/
    Our company is developing netflow analyzer (it is the second part of netflow analysis).
    So if you want to know more, contact me at any time. Of course, you can use any other
    netflow analyzers, there are many tool available .... free/commercial... the list of applications:
    http://netflow.caligare.com/applications.htm
    Please, rate if I helped you.
    Kind regards,
    Jan

  • I upgraded to OSX.8 and cannot load MS Encore. I desperately need some email files from ENCORE. Is there a program that can open my ENCORE email files?

    I upgraded to OSX.8 and cannot load MS Encore. I desperately need some email files from ENCORE. Is there a program that can open my ENCORE email files?
    SLM01

    Do you mean Entourage? It appears you have Office 2004 or older. Those are PowerPC apps only and will not run in Lion or later. If you need access to those emails like, "RIGHT NOW!", then I would suggest purchasing Office 2011 for Mac. Outlook is the new Office email client in 2011 and can import your older Entourage data.

  • Develop a program that can read pdf document in the UClinux OS?

    hello,
    I'm a programmer in a company which is doing embed development ,i want to develop a program that can read pdf document in the UClinux OS?
    Can some one give me some ideas?
    can some body give me some information?
    My email is [email protected]
    thank you!!!

    I would strongly recommend using one of the libraries that are available (Google). If you don't want to pay the (modest) costs of a commercial license, there are several open source projects with licenses that allow you to use them in commercial products.

Maybe you are looking for