Create a Quality Stock directly using 501 mvt type

Hi ,
I am trying to map one scenario in which when i do the goods receipt using 501 mvt type in MIGO the stock should directly go in to the QM inspection
A inspection lot should be created automatically for result recording.
when i am doing 501 mvt with Stock type Quality Inspection the system giving me an error as below
Change the inspection stock of material ISUUS6-M-W-1IN-10 in QM only
Regards
Amar

Hi,
        1) Activate 05 inspection Type in the qM view of the material master
        2) Do the GR with Mvt type 501
        3) Inspection lot is created
With regards
Yas

Similar Messages

  • Special stock indicator O to mvt. type 201?

    Dear All,
    The requirement is to clear the outside vendor stock against a cost center via migo.
    Can we add special stock indicator O to mvt. type 201 ?
    Can you also throw some light on the background of the process.
    Thanks in advance.

    Hi
    You will not be able to add Special Stockindicator O to 201, even of you copy the movemnt & create a new movemnt , you will not be able to add the new entries.
    Best way is to get back the Stock into Unrestricted use using 542 & then Post the goods issue using 201.
    Thanks & Regards
    Kishore

  • Goods Issue not possible with ref to Reservation using 201 mvt type when reservation created by 311 movement type

    HI MM Folks,
    My requirement is reservation should be created with 311 movt type. When we do good issue with 201 movt type with reference to reservation
    system is throwing an error "Goods movement not possible with mvmt type 311". Due to MRP run we should create a reservation using 311 movement type but not 201 mvt type, (If we create a reservation 201 movt type, during MRP run automatically reservation quantity also taking into consideration, to avoid this we will be creating reservation as 311 movt type). Is there any enhancement to available to reach the requirement. If it is possible give me guidelines.
    your help will be highly appreciable.
    Regards
    Vinay

    Dear,
    Movement type 311 is for doing transfer posting from storage location to storage location with single step.But Movement Type 201 is to have consumption entry with respect to cost center etc...
    You are creating a reservation using 311 movement type and while posting the entry you are selecting the"Executable action in MIGO" is "A08-Transfer Posting" so system will always use the movement type used at the time of reservation only.Here you can not change.
    And more over if you process entry with 201 movement type system creates accounting documents but with movement type 311 system will not create accounting documents.
    Regards,
    Pardhu

  • 501 Mvt type - Can it be used without production order in PP?

    Hello All,
    I need an information. Can you movement type 501 (Movement type without order) can be used in PP module?
    The descriptioni of 501 movement reads that 'Movement without reference'
    My question is can it be used in PP module to make goods receipt withouth production order.
    Appreciate you response on priority.
    Thanks
    Ravi

    Hi,
    Not sure what you mean by using in PP module.
    Anyways 501 movement is used for GR w/o respect to a purchase order. You can use movement type 521 for GR w/o ref to Production order.
    Hope it clarifies.
    Regards,
    Vivek

  • BAPI_GOODSMVT_CREATE used with mvt type 105

    Hi,
    That is easy.
    Somebody has worked with the mvt type 105* and the BAPI_GOODSMVT_CREATE in the same development?
    Release GR blocked stock for warehouse
    I am trying to use this combination but it does not work.
    Thanks in advance.

    The message is:
    M7 036 - No goods receipt possible for purchase order 4500001156 00000
    Let me explain my process.
    The users creates a goods receipt with mvt type 103 (blocked) and, in another moment, they will make a mvt type 105 (release). I am trying to convert it to an automatic process using a BAPI for this, but it does not work.
    That is my problem,
    Thanks in advance.

  • Report to check the stock transfer through 303 mvt type

    Hi,
    I understand that the stock transfer can be done through two ways
    1. Using 351 against UB PO and go MIGO using 101 --> Can be checked in the report MB5T, for stock in transit
    2. Using 303 and 305 mvt type --> the stock lies in Stock trans(Plant)
    When we do 303 mvt type, is there any standard report to check the stock in stock trans (Plant) ? Please let us know.

    hello
    for this you can use MB51 only. same report you can give the movement types as 313 & 315.
    Laxman

  • How to stop user from using 961 mvt type in MB1C transaction code?

    Hi Friends,
    We have two companies. Already we have restricted end user for using 961 & 962 mvt type in MB1C transaction code in one company code 1000. Now, we want to restrict end user for using 961 & 962 mvt type in MB1C transaction code in other company code 1200.
    I have checked configuration using OMJJ transaction. But, it is there so there may be some different way of control.
    Can any body help me?
    Regards
    Siva

    Hi,
    To restrict/block the movement type,  the steps are:
    1. use transaction code OMJJ.
    2. Enter the movement type you want to block.[From 961 To 961](do for both961& 962)
    3. Select the Second option in the List which appears in the left. (Allowed Transaction).
    4. Remove the transaction codes (MB1C)from where you do not want to use that particular movement type& save.
    For user specific to block the movement type, pl consult Basis Consultant.
    Regards,
    Biju K

  • Stock Balances uploading through Mvt type 561

    Hello,
            We are uploading Stock Balances by T.Code MB1C through Mvt. Type 561. IN FI-MM Integration T.code OBYC, In transaction key "GBB" I have assigned GL Account "Stock Suspense A/c" for BSA. And in transaction key BSX, I've assigned
    GL Account "Raw Material". After that when i enter stock balance through T.code MB1C, The document entry generated is as follows;
    Posting Key      GL Account             Amount
         89           Raw Material A/c           XXXXX
         91*         Stock Suspense A/c      XXXXX
    *The posting Key "91"  is for COSTS, which i believe is incorrect, so where have i gone wrong? what is the solution?? Please help!!!
    Regards
    Ashwin

    Hi,
    I agree with ajay.
    I think you want to know how this will effect u r Balnce Sheet. This is only a intermediary account for balance upload. In sap u uplaod u r trial balance in part using different transactions. For this u devide total transactions in gl, materials, ar, ap, assets etc and use different balancing account which in turn in total is having dr= cr as u r trial balance is having dr= cr.
    Please revert if any querry

  • Issue in moving material from unres to qual using 322 mvt. type

    There is a scenario in which user trying move the material from unres  to quality using movement type 322 in MB1B.
    error: Stock posting possible in qm only.
    Material Master: activated for the material.
    query;  Is it possible to use mb1b to move from unres to qual?
    What are other way to bring the unrestricted to quality, is that any material qm view setup required to achieve this.
    Edited by: kkr_chandran66 on Jan 7, 2011 1:57 PM

    We need to put it first into quality from unrestricted and then return.
    Dear from unrestricted to QI you can bring back through MB1B 322 movement type it is standard process but in your case it is not allowing because the stock which is in unrestricted was cleared means usage decision stock posted by UD so to bring back that stock in QI again you need to reverser that UD first for that refer my previous reply and apply note which will reverse the lot.
    what is the normal process steps for vendor return.{quote}
    Make a returnable purchase order,do the delivery to vendor through MIGO 161 movement type with reference to the returnable purchase order.
    Cheers
    KK

  • Output type not created for outbound delivery while using SHMNT05 idoc type

    Hi Experts,
    Please help me to solve the below issue.
    Problem:- I want to to generate an IDOC(using type SHPMNT06) once the PGI is done for an outbound delivery.
    Already it is working fine when used DESADV.DESADV01 or DESADV.DELVRY07. But now the output type is not getting created when used SHMNT.SHPMNT06. I have created a separate output type ZPJ7 just as a mirror copy of the earlier output type(ZPJ6) used for DESADV.DELVRY07.
    Question:- Is it possible to use idoc SHPMNT06 instead for DESADV01 or DELVRY07? If yes then what are steps to be followed?
    The reason why SHPMNT06 idoc is planned:- We have a scenario to send outbound delivery to 3rd party system via XI. If the outbound delivery is for National(Not for Export) and PGI is completed then send the idoc straight forward to XI otherwise DO NOT generate the idoc, but just create the delivery. Collect all the deliveries in a transport and send it in a shipment. The shipment details can be sent using SHPMNT idoc. Now from XI perspective, if we can utlitze the same SHPMNT idoc for the National delivery(1st case) then perhaps this will require less effort. Hence shipment idoc is required to be generated when the delivery is created and PGI is done.
    Also it would be great if you can advice some better way to solve above mentioned scenario.
    Many Thanks,
    Sanjay

    There could be several reasons. Go to the document and in the extras-output check output determination analysis in the processing log.
    If the output has been created successfully then you need to see your printer determination. Ask basis to check it up. If the problem is that even the print preview is not coming. Check your communication in the output analysis and ensure LOCL is selected. Any other printer will need to be configured.
    If thats done already then check whether you have maintianed the condition record.
    If that too is done then check whether your output type has been assigned to the output procedure and that the output type is listed in the procedure.
    regds
    Jude

  • Inspection Lot not creating for 657 mvt type

    Hello,
    I am unable to create inspection lot for customer returns. Mvt type used by SD module for customer return is 657 ( to blocked stock). While sales to return order with this mvt type, no inspection lot is getting generated.
    But when returns are done with 651 mvt type (Returns to QI), I am able to create inspection lots.
    Can anyone tell me how to activate inspection for 657 mvt type as I want this stock to go directly to Blocked stock.
    Thanks in advance.
    Jason

    Dear,
    Quality inspection stock (movement type is  655)
    Blocked stock (movement type 657)
    If the given quantity is posted to blocked stock returns first, you can make a manual goods movement posting in the Inventory Management component to transfer the quantity to valuated stock.
    Tcode vov6 - there will be schedule line category DN.
    go to details of DN.In Business data,check which movement type is assigned here change it to 655 and try.
    Also go to material master, select "Quality Management" view and execute. There click on "Insp.setup" and press "F5". Assign "06" under tbe tab "Inse.Type" and save.
    Now if that material returns from any customer, the stock will be blocked for quallity clearance. Only quality people can give clearance for that material.
    Regards,
    R.Brahmankar

  • Transfer Posting Unrestricted to Quality Stock

    Hello friends,
    I need to move the stock from Unrestricted to Quality Stock. I dont want to use Movt. 322 as it is reversal of 321. Is there any other way out?
    Regards,
    Navin

    Hi Navin
    322 mvt is the better option. 322 is not only reversal of 321. also this will be used in many occassions to bring stock from Un restricted to Quality Inspection. for example in recurring inspection (09 inspection type), material will move from Unrestricted to Quality Inspection with 322 mvt type only.
    Can you please explain why you dont want to use this mvt type tp bring stock to Quality Inspection?
    regards
    Srinivas

  • Do the customer return thruu2019 movement type 655 it goes to quality stock.

    I m facing problem regarding 655 movements type.i m not activate qm view for that material . still i m getting lot .whenever they do the customer return thruu2019 movement type 655 it goes to quality stock
    plz help me

    Which  Inspection type's lot is getting generated?
    I presume its 05 inspection type.Either remove this inspection type or in customization in QCC3 >Inspection during shipping->change the customization for sales order type & mvt type .

  • Field settings for MIGO without Purchase order - Mvt type -501

    Dear Guruz,
    in my present situation when i do MIGO with mvt type 101 i have to give delivary note as required entity.  But now i have a requirement where i have to create MIGO without purc doc  i.e mvt type 501.Also i ahve to provide the delivary note in the same.But when i am trying, it i see that The delivary note field is not present in the header part of migo(GR-others). field name: LFSNR. actually my requirement is i have to do the migo with a delivary note that is made mandatory for mvt type 501 also. I tried spro settings but could'nt find any solutions. Do i have to go out of SAP standard or is there any way that  i am unable to come up with as per standards?
    pl discuss

    Dear Krishna,
    In the 501 movement type there is a field available at the header level called as the recipient. Make the field mandatory for the 501 movement type with the following settings:
    SPRO - > Materials Management - Inventory Management and Physical Inventory- Goods Receipt -Define Screen Layout
    In this the screen layout can be changed under the general data. Make the recipient field mandatory. In this field the delivery challan can be maintained.
    In case the client want to change the name of this field from the recipient to "Delivery note" ask your abaper, The functionality is possible in SAP.
    hope it solves the problem

  • QM insp lots for mvt type 315

    Dear All,
    senario is as below
    we are doing 313 movt within the same plant for stock transfer after 313 stock will be in transit after that we
    do 315 movt for recieving of the stock.
    settings done insp activated for 313 and 315 movt types and 08 insp type is activated in M.M.
    but system is not creating insp lots and the stock directly goes into unrest use.
    can any body suggest what setting is missing?
    your suggestions will be highly appreciated
    Thanks
    Anil

    Hi Anil
    when you post using 315 mvt. type, system will create inspection lot
    plz. check @ OMJJ -- for the 315 mvt.type -- QM should be active --> then system will create inspection lot
    before that make sure Mat. master for that material 08 insp. active ,and post to inspection stock,task /mat spec, and Automatic assignment and characteristc --> these fields to be active
    let me know if u need further detail
    Thanks
    Sami

Maybe you are looking for