Create a report same as KSB1 and add WBS line item details from CJI3

Hello Everyone,
I need to create a report exactly like KSB1 which should have a selection screen exactly like KSB1 but it should also display the WBS line item details from CJI3.
What is the right way of doing it? Please advice.
COEP is pretty huge in Production, and we need to fetch data by a specific date in selection screen or a cost center group. This can take a long time to fetch data from the table based on selection screen input. Are there function modules or do we need to use some other tables to fetch data same as COEP?
Thanks for all your help.
Regards,
Shipra.

Hai ,
Please go throuth the note 325546 , u need to implement the customer exit COOMEP01 .
regards,
K.Vinay kumar

Similar Messages

Create a report same as KSB1 and add WBS line item details in the output

Hello Everyone,
I need to create a report exactly like KSB1 which should have a selection screen exactly like KSB1 but it should also display the WBS line item details from CJI3.
What is the right way of doing it? Please advice.
COEP is pretty huge in Production, and we need to fetch data by a specific date in selection screen or a cost center group. This can take a long time to fetch data from the table based on selection screen input. Are there function modules or do we need to use some other tables to fetch data same as COEP?
Thanks for all your help.
Regards,
Shipra.
Moderator message - Cross post locked
Edited by: Rob Burbank on May 28, 2009 10:54 AM

Hai ,
Please go throuth the note 325546 , u need to implement the customer exit COOMEP01 .
regards,
K.Vinay kumar

PO line item details from BAPI_PO_GETDETAIL1 and append to BAPI_PO_CHANGE

Hi,
The requirement is to get PO line item details from BAPI_PO_GETDETAIL1 and save it in the internal table and append that internal table into the BAPI_PO_CHANGE.
But i am getting dump in this program.
TABLES: ekpo.
DATA: BEGIN OF po_details.
        INCLUDE STRUCTURE BAPIMEPOITEM. "Include the structure of Dictionary Reference.
DATA: END OF po_details.
DATA: BEGIN OF po_details1.
        INCLUDE STRUCTURE BAPIMEPOITEM. "Include the structure of Dictionary Reference.
data: END OF po_details1.
DATA: it_po_details LIKE STANDARD TABLE OF po_details,
wa_po_details like line of it_po_details.
data: it_po_details1 like standard table of po_details,
wa_po_details1 like line of it_po_details1.
PARAMETERS: p_ebeln LIKE ekpo-ebeln DEFAULT '4500000016'.
CALL FUNCTION 'BAPI_PO_GETDETAIL1'
EXPORTING
    PURCHASEORDER = p_ebeln
TABLES
    POITEM        = it_po_details.
loop at it_po_details into po_details.
read table it_po_details into wa_po_details with key PO_item = p_ebeln.
move-corresponding po_details to po_details1.
CALL FUNCTION 'BAPI_PO_CHANGE'
    EXPORTING
      PURCHASEORDER = p_ebeln
    TABLES
      POITEM        = it_po_details.
append po_details to it_po_details1.
LOOP AT it_po_details1 INTO wa_po_details1.
    WRITE:/ wa_po_details1-PO_item,
       wa_po_details1-MATERIAL,
       wa_po_details1-SHORT_TEXT,
       wa_po_details1-PLANT.
ENDLOOP.
endloop.

HI,
1st you check for the following following authorization objects are checked:
M_BEST_BSA (document type in PO)
M_BEST_EKG (purchasing group in PO)
M_BEST_EKO (purchasing organization in PO)
M_BEST_WRK (plant in PO)
and to change the PO below is the eg for changing the short text:-
TABLES: ekpo.
DATA: BEGIN OF po_details.
        INCLUDE STRUCTURE bapimepoitem. "Include the structure of Dictionary Reference.
DATA: END OF po_details.
DATA: BEGIN OF po_details1.
        INCLUDE STRUCTURE bapimepoitem. "Include the structure of Dictionary Reference.
DATA: END OF po_details1.
DATA: it_po_details LIKE STANDARD TABLE OF po_details,
wa_po_details LIKE LINE OF it_po_details.
DATA: it_po_details1 LIKE STANDARD TABLE OF po_details,
wa_po_details1 LIKE LINE OF it_po_details1,
poheader LIKE bapimepoheader,
return LIKE STANDARD TABLE OF bapiret2 WITH HEADER LINE,
poitemx LIKE STANDARD TABLE OF bapimepoitemx WITH HEADER LINE.
PARAMETERS: p_ebeln LIKE ekpo-ebeln DEFAULT '5600010646'.
CALL FUNCTION 'BAPI_PO_GETDETAIL1'
EXPORTING
    purchaseorder = p_ebeln
IMPORTING
    poheader      = poheader
TABLES
    poitem        = it_po_details.
LOOP AT it_po_details INTO po_details.
READ TABLE it_po_details INTO wa_po_details INDEX 1.
MOVE-CORRESPONDING po_details TO po_details1.
MOVE: po_details-po_item TO poitemx-po_item,
        'X' TO poitemx-short_text.
APPEND poitemx.
CALL FUNCTION 'BAPI_PO_CHANGE'
    EXPORTING
      purchaseorder = p_ebeln
      poheader      = poheader
    TABLES
      return        = return[]
      poitem        = it_po_details[]
      poitemx     =
      poitemx[].
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
APPEND po_details TO it_po_details1.
LOOP AT it_po_details1 INTO wa_po_details1.
    WRITE:/ wa_po_details1-po_item,
    wa_po_details1-material,
    wa_po_details1-short_text,
    wa_po_details1-plant.
ENDLOOP.
ENDLOOP.

Reporting line item detail from smartview

Hi All
We have several line item detail accounts set-up - can you drill down into this information in smartview?
Many thanks for any thoughts / suggestions

Hi,
According to Smartview documentation, this is possible only if using Planning. Impossible to get line items when working on Financial Management.
Hope it helps,
Lionel.

Copying g/l balance and line items details

What is the best way to copy account balance and the line item details from one G/L account to another one.
Thanks

Hi
The best way to upload GL open items and GL balance is via FB01.
Good Luck
Hari

How Do I create Windows Form file in VS and add the form to my VS project?

C#, How Do I create Windows Form file in VS and add the form file to my VS project by using C# code?
I like to create a Windows Form file into my VS Win Form project by using C#. I have the path and the file name.
I need a Win Form with FileName.cs, FileName.Designer.cs, FileName.resx, and FileName (as you see it VS by adding a Win Form manually by using VS)
Rune Brattas

You cannot create a Form from code at run time.
For one thing, the user running your application will, almost certainly, not have a copy of Visual Studio to hand with which to build anything. (Not that you actually need 'Studio at all; Notepad and csc.exe are all you actually
need), but that's another story).
You can do this with an awful lot of pain, using the innards of the compiler from iside your own program, compiling the new Form's source code on the fly and then executing the resulting assembly within your application. IMHO, that's a simply terrifying
prospect especially as the code you will be compiling will be on someone else's machine and over which you will have absolutely no control. If you're lucky, they'll spell something wrong and it won't compile.
The "usual" way to do this sort of thing is to create additional, "plug-in" forms as library assemblies and have your program load and execute these at run-time.
Regards, Phill W.

How to create an incentive same as LPC and PPI in ISU. Any help from the experts as it is an urgent requirement of the client.

How to create an incentive same as LPC and PPI in ISU. Any help from the experts as it is an urgent requirement of the client.

Hi,
It depends on fact that when you want to create the incentive.
If you want to create at the time of invoicing, then you have to enhance event R402.
If you want to create at the time of payment, the you have to enhance event 0032.
Hope it helps
Thanks,
Amlan

Add new line item in VA02 by copying same Order line details

Hi All,
I've a requirement where i need to add new line items in the Sales Order (T Code VA02) with reference to the same Order lines . For e.g an Order 80000100 which has 2 line items and the requirement is to create a new line i.e. line item 0030 by copying the details from the existing line item 0010 of the same order .
I've checked the BAPI - BAPI_SALESDOCUMENT_COPY which is for Order Creation T Code VA01 . I'm looking out for Sales Order Change BAPI where i can give the reference as Order no and Order line item which will create a new line item in the same Order with the same details of the reference Order line item .
Do let me know your thoughts !!!!
Thanks,
Bintu

Hi -
Please check these two FM's BAPI_SALESORDER_GETDETAILBOS & BAPI_SALESORDER_CHANGE.
Regards,
Atul Mohanty

Development of Report for Cleared and Uncleared Vendor Line Items

Hi
we are in the process of developing a customized report, which invloves the details of cleared and un cleared line items for vendors. How can we obtain the details in SAP
regards
satyen

Hello,
Before consider developing any program development, I would request you look into the options available with various reports in Standard SAP for vendors.
FBL3N would essentially satisfy all the user needs across various industries.
Please also go through F.98 for all vendor reports.
Regards,
Ravi

HT201210 i have update and restore my wife iphone to 7.0.4 and i lost all the data what to do now? all contacts and kids photos goooone , we have the same apple ID and when i tried to restore from i cloude , i restored my contacts not her???!!!!!

i have update and restore my wife iphone to 7.0.4 and i lost all the data what to do now? all contacts and kids photos goooone , we have the same apple ID and when i tried to restore from i cloude , i restored my contacts not her???!!!!!

Looks like you restored your backup file to her phone. If you didn't back up your wife's phone first, then the data is gone, sorry.

How can create and change PCA line items.

How can create and change PCA line items.
Please tell me the process and t.codes.

If you are in version < 4.7 ee then use 9KE0 tcode for passing profict center entries or trasnafer of balances from one profit center to another.
If you are in new GL regular FI entry like FB50 will hold good for account types "S"

How can I create back up dvds for itunes and how do I back up from existing dvds?

How can I create back up dvds for itunes and how do I back up from existing dvds?

Recovery Mode:
1. Turn off iPad
2. Connect USB cable to computer; leave the other end alone
3. Press and hold the Home button down and connect the docking end of cable to iPad
4. Continue holding the Home button until you see the "Connect To iTune" screen
5. Release the Home button
6. Open iTune
7. You should see "iTunes has detected an iPad in recovery mode"
8. Use iTune to restore iPad
Note: You need to be patient and repeat the above many times to recover your iPad

I need to find all XML elements and add a line break to the text of each of them

I need to find all XML elements and add a line break to the text of each of them.
Is this possible with a script?

I need to go from this ...
to this...
but looking for the XML elements (not paragraphs) and then adding text ...
Thanks for your attention !!!

Prevent user from view line item details in KSB1 report

Hi,
how to restricting user from view line item details by double-click on it or highlight an item click on Document?
Regards,
Kelvin

Hi,
This issue got resolved.
SAP suggested to execute the program "FAGL_CORR_0001" for company code wise.
In ECC 5.00 from support pack 10 onwards two new fields has been added to table FAGLFLEXA. (earlier we are on support pack 9, recently we applied the latest support pack)
If we can execute the above program FAGL_CORR_0001, the two new fields will filled with relevant data and then we can able to use drill down option.
This is for your information.
Message was edited by:
prasad naga

How to add the line items while running the VA01

HI All,
I want to add the line items while I am running the VA01 t-code(In run time).Could anybody give the FM to create the line items....Its urgent

Hi ,
User Exits In Sales Document Processing
This IMG step describes additional installation-specific processing in sales document processing. In particular, the required INCLUDES and user exits are described.
Involved program components
System modifications for sales document processing affect different areas. Depending on the modification, you make the changes in the program components provided:
MV45ATZZ
For entering metadata for sales document processing. User-specific metadata must start with "ZZ".
MV45AOZZ
For entering additional installation-specific modules for sales document processing which are called up by the screen and run under PBO (Process Before Output) prior to output of the screen. The modules must start with "ZZ".
MV45AIZZ
For entering additional installation-specific modules for sales document processing. These are called up by the screen and run under PAI (Process After Input) after data input (for example, data validation). The modules must start with "ZZ".
MV45AFZZ and MV45EFZ1
For entering installation-specific FORM routines and for using user exits, which may be required and can be used if necessary. These program components are called up by the modules in MV45AOZZ or MV45AIZZ.
User exits in the program MV45AFZZ
The user exits which you can use for modifications in sales document processing are listed below.
USEREXIT_DELETE_DOCUMENT
This user exit can be used for deleting data which was stored in a separate table during sales document creation, for example, if the sales document is deleted.
For example, if an additional table is filled with the name of the person in charge (ERNAM) during order entry, this data can also be deleted after the sales order has been deleted.
The user exit is called up at the end of the FORM routine BELEG_LOESCHEN shortly before the routine BELEG_SICHERN.
USEREXIT_FIELD_MODIFICATION
This user exit can be used to modify the attributes of the screen fields.
To do this, the screen fields are allocated to so-called modification groups 1 - 4 and can be edited together during a modification in ABAP. If a field has no field name, it cannot be allocated to a group.
The usage of the field groups (modification group 1-4) is as follows:
Modification group 1: Automatic modification with transaction MFAW
Modification group 2: It contains 'LOO' for step loop fields
Modification group 3: For modifications which depend on check tables or on other fixed information
Modification group 4: is not used
The FORM routine is called up for every field of a screen. If you require changes to be made, you must make them in this user exit.
This FORM routine is called up by the module FELDAUSWAHL.
See the Screen Painter manual for further information on structuring the interface.
USEREXIT_MOVE_FIELD_TO_VBAK
Use this user exit to assign values to new fields at sales document header level. It is described in the section "Transfer of the customer master fields into the sales document".
The user exit is called up at the end of the FORM routine VBAK_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBAP
Use this user exit to assign values to new fields at sales document item level. It is described in the section "Copy customer master fields into the sales document".
The user exit is called up at the end of the FORM routine VBAP_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBEP
Use this user exit to assign values to new fields at the level of the sales document schedule lines.
The user exit is called up at the end of the FORM routine VBEP_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBKD
Use this user exit to assign values to new fields for business data of the sales document. It is described in the section "Copy customer master fields into sales document".
The user exit is called up at the end of the FORM routine VBKD_FUELLEN.
USEREXIT_NUMBER_RANGE
Use this user exit to define the number ranges for internal document number assignment depending on the required fields. For example, if you want to define the number range depending on the sales organization (VKORG) or on the selling company (VKBUR), use this user exit.
The user exit is called up in the FORM routine BELEG_SICHERN.
USEREXIT_PRICING_PREPARE_TKOMK
Use this user exit if you want to include and assign a value to an additional header field in the communication structure KOMK taken as a basis for pricing.
USEREXIT_PRICING_PREPARE_TKOMP
Use this user exit if you want to include or assign a value to an additional item field in the communication structure KOMP taken as a basis for pricing.
USEREXIT_READ_DOCUMENT
You use this user exit if further additional tables are to be read when importing TA01 or TA02.
The user exit is called up at the end of the FORM routine BELEG_LESEN.
USEREXIT_SAVE_DOCUMENT
Use this user exit to fill user-specific statistics update tables.
The user exit is called up by the FORM routine BELEG-SICHERN before the COMMIT command.
Note
If a standard field is changed, the field r185d-dataloss is set to X. The system queries this indicator at the beginning of the safety routine. This is why this indicator must also be set during the maintenance of user-specific tables that are also to be saved.
USEREXIT_SAVE_DOCUMENT_PREPARE
Use this user exit to make certain changes or checks immediately before saving a document. It is the last possibility for changing or checking a document before posting.
The user exit is carried out at the beginning of the FORM routine BELEG_SICHERN.
User exits in the program MV45AFZA
USEREXIT_MOVE_FIELD_TO_KOMKD
Use this user exit to include or assign values to additional header fields in the communication structure KOMKD taken as a basis for the material determination. This is described in detail in the section "New fields for material determination".
USEREXIT_MOVE_FIELD_TO_KOMPD
Use this user exit to include or assign values to additional item fields in the communication structure KOMPD taken as a basis for the material determination. This is described in detail in the section "New fields for material determination".
USEREXIT_MOVE_FIELD_TO_KOMKG
Use this user exit to include or assign values to additional fields in the communication structure KOMKG taken as a basis for material determination and material listing. This is described in detail in the section "New fields for listing/exclusion".
USEREXIT_MOVE_FIELD_TO_KOMPG
Use this user exit to include or assign values to additional fields in the communication structure KOMPG taken as a basis for material determination and material listung. This is described in detail in the section "New fields for listing/exclusion".
USEREXIT_REFRESH_DOCUMENT
With this user exit, you can reset certain customer-specific fields as soon as processing of a sales document is finished and before the following document is edited.
For example, if the credit limit of the sold-to party is read during document processing, in each case it must be reset again before processing the next document so that the credit limit is not used for the sold-to party of the following document.
The user exit is executed when a document is saved if you leave the processing of a document with F3 or F15.
The user exit is called up at the end of the FORM routine BELEG_INITIALISIEREN.
User-Exits in program MV45AFZB
USEREXIT_CHECK_XVBAP_FOR_DELET
In this user exit, you can enter additional data for deletion of an item. If the criteria are met, the item is not deleted (unlike in the standard system).
USEREXIT_CHECK_XVBEP_FOR_DELET
In this user exit, you can enter additional data for deletion of a schedule line. If the criteria are met, the schedule line is not deleted (unlike in the standard system).
USEREXIT_CHECK_VBAK
This user exit can be used to carry out additional checks (e.g. for completion) in the document header. The system could, for example, check whether certain shipping conditions are allowed for a particular customer group.
USEREXIT_CHECK_VBAP
This user exit can be used to carry out additional checks (e.g. for completion) at item level.
USEREXIT_CHECK_VBKD
The user exit can be used to carry out additional checks (e.g. for completion) on the business data in the order.
USEREXIT_CHECK_VBEP
This user exit can be use to carry out additional checks (e.g. for completion) on the schedule line. During BOM explosion, for example, you may want certain fields to be copied from the main item to the sub-items (as for billing block in the standard system).
USEREXIT_CHECK_VBSN
You can use this user exit to carry out additional checks (e.g. for completion) on the serial number.
USEREXIT_CHECK_XVBSN_FOR_DELET In this user exit, you can enter additional criteria for deletion of the serial number. If the criteria are met, the serial number is not deleted (unlike in the standard system).
USEREXIT_FILL_VBAP_FROM_HVBAP
You can use this user exit to fill additional fields in the sub-item with data from the main item.
USEREXIT_MOVE_FIELD_TO_TVCOM_H
You can use this user exit to influence text determination for header texts. For example, you can include new fields for text determination or fill fields that already exist with a new value.
USEREXIT_MOVE_FIELD_TO_TVCOM_I
You can use this user exit to influence text determination for item texts. For example, you can include new fields for text determination or fill fields that already exist with a new value.
User-Exits for product allocation:
The following user exits all apply to structure COBL, in which the data for account determination is copied to item level.
USEREXIT_MOVE_FIELD_TO_COBL
Option to include new fields in structure COBL.
USEREXIT_COBL_RECEIVE_VBAK
Option to assign values from the document header to the new fields.
USEREXIT_COBL_RECEIVE_VBAP
Option to supply values from the item to the new fields.
USEREXIT_COBL_SEND_ITEM
A changed field can be copied from the structure into the item. You could use the user exit to display a certain field in the account assignment block (see also MV45AFZB).
USEREXIT_COBL_SEND_HEADER
A changed field can be copied from the structure to the header (see source text MV45AFZB)
USEREXIT_SOURCE_DETERMINATION
You can use this user exit to determine which plant will be used for the delivery. In the standard system, the delivering plant is copied from the customer master or the customer-material info record. If you want to use a different rule, then you must enter it in this user exit.
USEREXIT_MOVE_FIELD_TO_ME_REQ
With this user exit you can include additional fields for the following fields:
EBAN (purchase requisition)
EBKN (purchase requisition-account assignment)
USEREXIT_GET_FIELD_FROM_SDCOM
Option to include new fields for the variant configuration. Fields that are included in structure SDCOM can be processed and then returned to the order.
USEREXIT_MOVE_WORKAREA_TO_SDWA
You can use this user exit to format additional work areas for the variant configuration. You will find notes on the user exit in MV45AFZB.
User-Exits for first data transfer:
The following user exits can only be used for the first data transfer.
Note
Only use the user exits if the names/fields do NOT have the same name.
USEREXIT_MOVE_FIELD_TO_VBAKKOM
Option to include additional fields in structure VBAKKOM (communiction fields for maintaining the sales document header)
USEREXIT_MOVE_FIELD_TO_VBAPKOM
Option to include additional fields in structure VBAPKOM (communication fields for maintaining a sales item)
USEREXIT_MOVE_FIELD_TO_VBEPKOM
Option to include additional fields in structure VBEPKOM (communication fields for maintaining a sales document schedule line)
USEREXIT_MOVE_FIELD_TO_VBSN
You can use this user exit to include fields in structure VBSN (scheduling agreement-related change status).
USEREXIT_MOVE_FIELD_TO_KOMKH
You can use this user exit to include new fields for batch determination (document header).
USEREXIT_MOVE_FIELD_TO_KOMPH
You can use this user exit to include new fields for batch determination (document item).
USEREXIT_CUST_MATERIAL_READ
You can use this user exit to set another customer number in the customer material info record (e.g. with a customer hierarchy)
USEREXIT_NEW_PRICING_VBAP
Option for entry of preconditions for carrying out pricing again (e.g. changes made to a certain item field could be used as the precondition for pricing to be carried out again). Further information in MV45AFZB.
USEREXIT_NEW_PRICING_VBKD
Option for entry of preconditions for carrying out pricing again (e.g. changes to the customer group or price group could be set as the preconditions for the system to carry out pricing again). Further information in MV45AFZB.
User-Exits in Program MV45AFZD
USEREXIT_CONFIG_DATE_EXPLOSION
The BOM is exploded in the order with the entry date. You can use this user exit to determine which data should be used to explode the BOM (explosion with required delivery date, for example).
User exits in the program FV45EFZ1
USEREXIT_CHANGE_SALES_ORDER
In the standard SAP R/3 System, the quantity and confirmed date of the sales document schedule line is changed automatically if a purchase requisition is allocated, and it or the sales document is changed (for example, quantity, date).
If you want to change this configuration in the standard system, you can define certain requirements in order to protect your sales orders from being changed automatically. Use this user exit for this purpose. Decide at this point whether the schedule lines are to be changed.
User-Exits in Program RV45PFZA
USEREXIT_SET_STATUS_VBUK
In this user exit you can you can store a specification for the reserve fields in VBUK (header status). Reserve field UVK01 could, for example, be used for an additional order status (as for rejections status, etc.).
The following workareas are available for this user exit:
VBUK (header status)
FXVBUP (item status)
FXVBUV (Incompletion)
USEREXIT_SET_STATUS_VBUP
In this user exit you can you can store a specification for the reserve fields for VBUP (item status).
The following workareas are available for this user exit:
FXVBAP (Item data)
FXVBAPF (Dynamic part of order item flow)
FXVBUV (Incompletion)
USEREXIT_STATUS_VBUK_INVOICE
You can use this user exit to influence billing status at header level.
User exits in the screens
Additional header data is on screen SAPMV45A 0309, additional item data on screen SAPMV45A 0459. These screens contain the Include screens SAPMV45A 8309 or SAPMV45A 8459 as user exits.
Fields which are also to be included in the sales document for a specific installation should be included on the Include screens for maintaining. If an application-specific check module is needed for the fields, this can be included in the Include MV45AIZZ. The module is called up in the processing logic of the Include screens.
For field transports, you do not have to make changes or adjustments.
Example
A new field, VBAK-ZZKUN, should be included in table VBAK.
If the check is defined via the Dictionary (fixed values or check table) the field must be included with the fullscreen editor in the Include screen SAPMV45A 8309. In this case, no change has to be made to the processing logic.
User Exits in Program MV45AFZ4
USEREXIT_MOVE_FIELD_TO_KOMK
You can use this user exit to add or edit additional header fields in the communication structure - KOMK- for free goods determination. For more information, see the New Fields for Free Goods Determination IMG activity.
USEREXIT_MOVE_FIELD_TO_KOMP
You can use this user exit to add or edit additional item fields in the communication structure KOMP for free goods determination. For more information see the New Fields for Free Goods Determination IMG activity.
User Exits in the SAPFV45PF0E and SAPFV45PF0C Programs
EXIT_SAPFV45P_001
You can use this user exit to decide whether intercompany billing data is used in the profitability segment for cross-company code sales, or whether the data comes from external billing (external customer, sales data from the selling company code.
regards
P.

Create a report same as KSB1 and add WBS line item details from CJI3

Similar Messages

Maybe you are looking for