Create a specific reset configuration - different than factory reset

Hello,
I need to configure several ipads (between 10-20) with the same configuration by default. The idea is to loan the ipad to some people and each time they return them back to reset the configuration to the one I stablished (not the factory reset). Is this possible?
Thank you in advance,

Hello alfred,
Just one question. As far as I have seen, the apple configuration is only available for MAC S.O. It is there any similar software available for Windows?
Thanks again,

Similar Messages

GS70-2OD-001US Graphics card than Factory Reset Issue

After using heavy programs such as gaming and media design, everything on my laptop just shuts down. Out of nowhere it says that my video card's memory has ran out so I thought I was just overdoing it and so I restarted. I do this quite often so it came as a surprise to be that this happened for the first time. Once laptop was back up, the moment I tried to boot up anything that depended on the Nvidia GeForce GTX 765m, it would say that there was an issue with the nvidia kernel and it restarted successfully so I thought it was an issue with the graphics card. Uninstalling and Reinstalling did not work so I contacted NVidia customer support for help and they said to change power management to max, which didn't help either unfortunately.
Eventually, I just saved all my files onto my external hard drive and went for a factory reset hoping that may fix the problem, if not than sending the laptop back in to get it checked. After reset got to 100%, the computer shuts down without resetting so I waited 10 minutes and came back to start it up and it says "Windows was not successfully installed and windows need to be installed." I do not have a recovery disc or the windows 8 oem key to start my laptop back up again. Unfortunately it is a bit frustrating considering it is the only laptop that I have for assignments - typing this on a tablet - so hopefully there is a fix for it soon. Please help if you have any information. Thanks a lot.

Call MSI and do an RMA. Most likely there is an issue with the video card that needs to be fixed. Atleast, by the sound of what you're explaining that's what I would think.
>>How to contact MSI.<<

Have i phone 4s. phone is disabled and I cant remember info to reset. how can i factory reset?

how can i reset a 4s that i forgot pass code to? I dont remember all the information when i set up account. Can i factory reset?

Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
A
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
7. iOS - Unable to update or restore
Forgotten Restrictions Passcode Help
iPad,iPod,iPod Touch Recovery Mode
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
Also, see iTunes- Restoring iOS software.

My brother used his Verizon Wireless SIM to activate my factory unlocked iphone 5s. Now, I can't access the cellular data network option to change APN settings for my new carrier. Already tried configuration utility and factory resets.

So as the title says, after I got my iPhone 5s from apple, factory unlocked, my brother used his sim card in it for a moment to allow it to be registered and usable on WIFI until I made it to Japan. Now that I have a data SIM card, I have to input specific APN settings, which are located in settings>cellular>cellular data network, however, cellular data network is not available as an option. I have reset the phone multiple times with and without backups and with and without the new sim in the phone. I have also used the configuration utility to try to put the APN settings in the phone. I contacted Apple and they didn't really have an answer as to what i should do. My brother checked his Verizon account and my phone does not show up as one of his devices, so right now I'm stuck with and incredibly expensive iPod. Does anyone have any idea what I can do to remedy this? I am unable to contact Verizon via telephone myself as I have no phone service. Any help would be greatly, greatly appreciated.

You only have to clone your mac when using certain cable modem. You don't clone your mac when using dsl.
Greetings from Northern Ontario, Canada

Reset enable password and factory reset LAP1131AG

HI,
I have an LAP1131AG that is configured and has a secret set for enable operations. The file system shows:
XXX-AP-XXX>sh flash
Directory of flash:/
    2 -rwx         256 May 05 2010 18:17:39 +00:00 lwapp_officeextend.cfg
    3 -rwx         125 Jan 01 1970 00:00:42 +00:00 env_vars
    4 drwx         128 Jan 01 1970 00:01:55 +00:00 c1130-rcvk9w8-mx
   13 drwx         320 May 05 2010 17:04:54 +00:00 c1130-k9w8-mx.124-21a.JHA
    7 -rwx       24484 Dec 27 2010 05:56:58 +00:00 lwapp_reap.cfg
    8 -rwx       26282 Aug 20 2010 01:09:31 +00:00 event.log
   10 -rwx        6168 Mar 01 2002 00:00:30 +00:00 private-multiple-fs
15998976 bytes total (9104384 bytes free)
I've tried resteting with the mode button, but although it looks like the IP is set to 10.0.0.1 from the colsole, I can't connect to the web GUI. Also, if I try 'enable' on the console prompt I'm asked for a password that I don't have.
Basically I can't get a prompt where I can do the usual 'clear lwapp private-config' trick.
Any help would be apprceietd.
Simon

Ok, tried all of this - when I go back to the LAP image I still can't login.
Looks like I don't have permissions to erase the private-config file:
ap#more nvram:private-config
%Error opening nvram:private-config (Permission denied)
ap#
How do I delete this file???
Simon

Factory Reset/Zero Out Reset my 755p

I need to delete all of the data from my Verizon 755p before I return damaged hardware to Verizon. I looked at the Factory Reset instructions, Article ID: 15574 in the Palm KB, but I didn't see specific instructions relating to the 755p. Will the Centro or 700/680 directions work for deleting all of my data?
Does a Factory Reset really delete all of the data, or can it still be recovered?
Also, is there a way to Zero Out Reset a 755p like the 650?
Thanks.
Post relates to: Treo 755p (Verizon)
Post relates to: Treo 755p (Verizon)

I was upgrading to another phone and also wanted to do a factory. the instructions in the palm knowledge base (kb.palm.com) are below, but they didnt quite work for me. I have an ACCESS POWERED screen that comes up before the Palm screen - came with some OS update or other. I moved things in the procedure below a bit and got the results I wanted. Change the below instructions as follows:
. Add step 1a to press and hold Power/End - yes, before you even remove the battery.
. Add step 3a to observe the "ACCESS POWERED" screen for 15 seconds and then release the Power/End
. Ignore all of Step 4
. Go to Step 5, then step 6 - your Treo 755p will appear to do another reset and come up "fully clean."
. lgnore Step 7 - the language selection screen never appears.
Good luck. This was quick and flawless for me - and with the desired results.
Factory Reset for Centro and Treo 755p
If you've set a password on your smartphone, any hard reset will automatically become a Factory Reset. With this method, you'll enter a password and then perform a hard reset.
On your smartphone, launch the Security application.
If the Password box says "Unassigned," tap the box and create a password for your smartphone. Press Applications to exit the Security application.
Now that a system password is established, we'll perform a hard reset to complete the factory reset. With the device face down, remove the battery door. Removing the stylus may make it easier to remove the battery for the next step.
Remove the battery. Then put the battery back in.
When the Palm logo appears, press and hold Power/End until the black status bar at the bottom of the screen fills and disappears, and then release Power/End.
If you performed this reset correctly, you should see a white screen with black text saying "reformatting in progress" (any other activity - such as the Palm OS logo and then the Applications launcher appearing - means the reset was performed incorrectly; try again). Your smartphone will appear to reset again after the "reformatting in progress" screen disappears.
When the Erase all data? prompt appears, press Up to confirm the Factory reset.
When the language selection screen appears, select the same language you selected for your desktop software. The Factory reset is now complete.

Old 1760 With password recovery disabled, no way to factory reset

Hi
I have an old 1760 router with Password Recovery Functionality Disabled
I don't care about its actual configuration , I need factory reset
I Followed the well documented procedure :
Normal boot
Self decompressing the image : #################################################
################################################################ [OK]
Smart Init is disabled. IOMEM set to: 15
PMem allocated: 57042944 bytes; IOMem allocated: 10065920 bytes
              Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
           cisco Systems, Inc.
           170 West Tasman Drive
           San Jose, California 95134-1706
Cisco Internetwork Operating System Software
IOS (tm) C1700 Software (C1700-SV8Y7-M), Version 12.3(6d), RELEASE SOFTWARE (fc1
Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Fri 15-Oct-04 03:46 by kellythw
Image text-base: 0x80008120, data-base: 0x81440804
Send break at this time , then :
Do you want to reset the router to factory default
configuration and proceed [y/n] ? y
Reset router configuration to factory default.
cisco 1760 (MPC860P) processor (revision 0x500) with 55706K/9830K bytes of memor
y.
Processor board ID FOC07450X9P (3881152211), with hardware revision 0000
MPC860P processor: part number 5, mask 2
Bridging software.
X.25 software, Version 3.0.0.
1 FastEthernet/IEEE 802.3 interface(s)
32K bytes of non-volatile configuration memory.
32768K bytes of processor board System flash (Read/Write)
WARNING:
Executing this command will disable password recovery mechanism.
Do not execute this command without another plan for
password recovery.
Are you sure you want to continue? [yes/no]: y
The router boot up normally anyway , still with original password unrecovered instead a fresh factory default.
Any hint please ?????
Thank you

Federico,
There is something quite strange going on but one thing has caught my attention in particular. This is a part of your transcript:
Send break at this time , then :
Do you want to reset the router to factory default configuration and proceed [y/n] ? y Reset router configuration to factory default.cisco 1760 (MPC860P) processor (revision 0x500) with 55706K/9830K bytes of memory.Processor board ID FOC07450X9P (3881152211), with hardware revision 0000MPC860P processor: part number 5, mask 2Bridging software.X.25 software, Version 3.0.0.1 FastEthernet/IEEE 802.3 interface(s)32K bytes of non-volatile configuration memory.32768K bytes of processor board System flash (Read/Write)WARNING:Executing this command will disable password recovery mechanism.Do not execute this command without another plan forpassword recovery.Are you sure you want to continue? [yes/no]: y
Notice that the first question is whether you want to erase the configuration - you respond with yes, and the router continues booting. The second question displayed clearly shows that the router continues loading the configuration file and in particular processes the no service password-recovery command.
What would happen if you answered with n to this second question, preventing the router from accepting the no password-recovery stored command? Could you reload the router afterwards and try the password recovery procedure again?
Also, if this router has a removable Flash card, would you be able to enter the ROMMON and set the configuration register to 0x2142 if you removed the card and tried booting the router?
Best regards,
Peter

Hp officejet/deskjet 4625 fax function disabled after a factory reset.

Officejet/Deskjet 4625 Fax function disabled after a factory reset.
- HP 4625
- Fax function disabled after a factory reset, fax function disabled on fax machine.
Good day HP community! I have a problem on my Hp officejet/deskjet 4625 after i did a factory reset. Oh by the way my printer is on a wireless connection setup and its ip address kept on changing and became very annoying so i decided to do the factory reset. After the factory reset i visited a "teach me to how to re-setup the wireless connection for Hp officejet/deskjet 4625" i downloaded the file needed on the installation and followed the steps but I failed. Here is the LINK.
My installation failed during the "connect the usb cable from the printer to the computer" sequence. I plugged the usb cable waited patiently but after a long 30 minutes wait nothing happened. The full feature installer of the Hp officejet/deskjet 4625(OJ4620**) didnt work for me. Luckily i have a friend that had a basic installer of the Hp officejet/deskjet 4620(DJ4620**) sent me via e-mail. I wonder what is the difference between OJ4620 and DJ4620 installers were, but thanks to my friend the DJ4620 worked. I finished the installation and the wireless connection setup was successfull!
Now i can print via usb cable connection, network ssid connection & tru apple products. I just have one problem. My printer's fax function was disabled. I believe that the OJ4620 had an issue on win7 64bit OS, i also believe that the DJ4620 isnt capable on installing the fax function because it was only a basic installer.
I tried to search in the internet but to no avail, I cannot find a HP 4620 fax installer either an officejet installer nor a deskjet installer.
My machines:
Desktop - 64bit
Netbook - 64bit
Macbook Pro
Macbook Air
Hp officejet/deskjet 4625
I badly need help on the fax functions because my small office need it everyday. I hope someone can help me here. Thanks in advance!

Hello theEGG.
Thank you for your detailed response. I understand after installing printer you are unable to use your Fax features. Any HP printer full feature software package already comes with the fax features.
Please uninstall your software. I am going to provide a HP document to help you: Uninstall The Software. After this progress is done please move onto the next step: (This is only for your Windows computers)
How to clean Temp Folder. In this document there is two ways to clean out the Temp folder. Please choose which option you are conformable with.
To install the software, please use the:Printer Install Wizard. Make sure you leave the USB cord out of the computer until it props you to insert the USB cord.
If you have any other questions please let me know.
Ashley
I worked on behalf of HP.

New ID pin or factory reset. NEWBIE

So, my mother has given me a playbook she purchased from her friend. We do have the password.
First off, I have no idea what I am doing. I can see the womans fb messages and emails. I just want to see my stuff. Do I need a whole new pin or do I do a whole factory reset?

Doing a factory reset will erase all personal information left behind by the previous owner. After that, registering your BlackBerry ID with that PlayBook will prevent any future messages from another user from making their way on to your PlayBook. As long as the previous BB ID is registered on that unit, messages will continue to show up on it.
Cheers.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

Xperia M4 Aqua, forgot password, how to reset password or factory reset phone?

I've had my phone for a couple of days and today I decided to get a pattern lock, and of course the first thing I do is to forget it. How do I reset the pattern lock? I've googled around without any succes and when I enter wrong pattern there is no "forgot pattern" button, it just says "you failed to draw the right pattern X times, wait 30 seconds before trying again", I tried almost 70 times already and Im not getting anywhere.Then I tried to look up how to factory reset if you forgot your password, and I found one guide saying you have to turn off your phone and press and hold down the volume+ button and power button for about 10 seconds, in order to bring up a reseting menu or whatever. But holding down these buttons just turns the phone on and off every 2 seconds... So if anyone could tell me either how to reset the pattern or factory reset, that'd be great.

You have these options:
1. See this link
2. You need to perform a software repair using PC Companion.The process will erase all internal memory.You might need to charge your device for about 1-2 hours before so the device has at least 80% battery.
Make sure the device is not connected to computer or laptop and turned off (sometimes you have to press power button and volume up until the device vibrates 3 times or on some devices you have to press the small button near the SIM tray or on the back of the device).
Open PC companion->support zone->phone/tablet software update->repair my phone/tablet blue highlighted.Follow the steps given,do not connect your phone until prompted to press volume down while plugging USB cable. If PC companion does not start the repair process, you might need to run it in compatibility mode with Windows 7 (in some cases XP).

Problem when we created the managed server to configure different ports.

I am trying to configure different ports for admin console and my communication service as we can’t share admin port to the outside world.
So that only admin can access admin console using admin port.
And out side clients can access my webapplication using different port.
For this i have created the managed server in weblogic.and I deployed the application on managed server.
Now admin server is running on 8001 port and my Communication Service application is running on 7001 port.
But when I tried to configure MBeans related to myCommunicationServiceApplication those were disapper on admin console. And the other wlng services are appearing on admin console.
1. Since my application deployed on managed server MBeans registration happened from myapplication hence it’s disappear on admin console.
Now If I want to configure Mbeans (related to my communication service) how can I configure it?
2. My communication service using configurationStore module and other wlng services.
When I tried to start my application on managed server I got the below error:
<Apr 28, 2009 12:22:44 PM IST> <Error> <Deployer> <BEA-149231> <dscp11166.TechMahindra.com> <Unable to set the activation state to true for the application 'wlng_nt_qualcomm_active_mediation [Version=1.0]'.
com.bea.wlcp.wlng.api.storage.configuration.ConfigurationException: Configuration store module is not available.
3. I tried to target all wlngResources to manged server by editing config.xml file.
Then all wlng services disappears on admin console. If this is the case how can I configure container/account services on wlng?
I have created the Basicweblogic domain.
Below is the config.xml for reference.
"QualcommServer" is managed server name.
Can any one please suggest me how to configure this kind of scenarios?
<server>
<name>AdminServer</name>
<machine>new_Machine_1</machine>
<listen-port>8001</listen-port>
<default-iiop-user>weblogic</default-iiop-user>
<default-iiop-password-encrypted>{3DES}W8nBdoJPRZ8TkwcXwAZoxA==</default-iiop-password-encrypted>
<listen-address>localhost</listen-address>
</server>
<server>
<name>QualcommServer</name>
<machine>new_Machine_1</machine>
<listen-address>localhost</listen-address>
<server-start>
<java-vendor>Sun</java-vendor>
<java-home>C:\Program Files\Java\jdk1.6.0</java-home>
<class-path>C:\bea\wlng400\server\lib\weblogic.jar;C:\bea\wlng_pds400\lib\wlng\wlng.jar</class-path>
<bea-home>C:\bea</bea-home>
<username>weblogic</username>
<password-encrypted>{3DES}W8nBdoJPRZ8TkwcXwAZoxA==</password-encrypted>
</server-start>
</server>
<embedded-ldap>
<name>managedserver</name>
<credential-encrypted>{3DES}9q80YuFJueVVJxoWduJA1OGhbqk14EpgQWWyTrzlmxo=</credential-encrypted>
</embedded-ldap>
<configuration-version>10.0.1.0</configuration-version>
<app-deployment>
<name>wlng_nt_session#4.0</name>
<target>QualcommServer</target>
<module-type>ear</module-type>
<source-path>C:\bea\wlng400/applications/wlng_nt_session.ear</source-path>
<security-dd-model>CustomRolesAndPolicies</security-dd-model>
</app-deployment>
<app-deployment>
<name>interceptors</name>
<target>QualcommServer</target>
<module-type>ear</module-type>
<source-path>C:\bea\wlng400/applications/interceptors.ear</source-path>
<security-dd-model>CustomRolesAndPolicies</security-dd-model>
</app-deployment>
<app-deployment>
<name>wlng_prm</name>
<target>QualcommServer</target>
<module-type>ear</module-type>
<source-path>C:\bea\wlng400/applications/wlng_prm.ear</source-path>
<security-dd-model>CustomRolesAndPolicies</security-dd-model>
</app-deployment>
<app-deployment>
<name>wlng_nt_qualcomm_active_mediation#1.0</name>
<target>QualcommServer</target>
<module-type>ear</module-type>
<source-path>servers\AdminServer\upload\wlng_nt_qualcomm_active_mediation.ear</source-path>
<security-dd-model>DDOnly</security-dd-model>
</app-deployment>
<machine>
<name>new_Machine_1</name>
<node-manager>
<name>new_Machine_1</name>
<listen-address>localhost</listen-address>
</node-manager>
</machine>
<jms-server>
<name>JMSServer-AdminServer</name>
<target>AdminServer</target>
</jms-server>
<jms-system-resource>
<name>WLNGJMSResource</name>
<target>QualcommServer</target>
<descriptor-file-name>jms/wlng-jms.xml</descriptor-file-name>
</jms-system-resource>
<custom-resource>
<name>networktier</name>
<target>AdminServer</target>
<descriptor-file-name>custom/nt.xml</descriptor-file-name>
<resource-class>com.bea.wlcp.wlng.management.descriptor.resource.WlngTierResource</resource-class>
<descriptor-bean-class>com.bea.wlcp.wlng.management.descriptor.bean.WlngTierBean</descriptor-bean-class>
</custom-resource>
<custom-resource>
<name>wlng-edr</name>
<target>AdminServer</target>
<descriptor-file-name>custom/wlng-edr.xml</descriptor-file-name>
<resource-class>com.bea.wlcp.wlng.management.descriptor.resource.WlngEdrResource</resource-class>
<descriptor-bean-class>com.bea.wlcp.wlng.management.descriptor.bean.WlngEdrBean</descriptor-bean-class>
</custom-resource>
<admin-server-name>AdminServer</admin-server-name>
<jdbc-system-resource>
<name>wlng.datasource</name>
<target>QualcommServer</target>
<descriptor-file-name>jdbc/wlng-jdbc.xml</descriptor-file-name>
</jdbc-system-resource>
<jdbc-system-resource>
<name>wlng.localTX.datasource</name>
<target>QualcommServer</target>
<descriptor-file-name>jdbc/wlng-localTX-jdbc.xml</descriptor-file-name>
</jdbc-system-resource>
Thanks,
Srinu Babu P

Dear Nariharan,
Today I faced a simlar issue, and this SAP Note helped me fix it: 1966807 - Duplication of AET table records in change processing
In my case, cardinality of AET table was 1:1, and I was getting duplicate PARENT_ID every time when trying to create a subsequent service request for my activity.
Regards,
Andrew

How to create a table of contents (TOC) linking to specific pages of different (multiple) PDFs

Hi All,
I would like to create clickable Table of Contents (TOC) that can lead to a sub clickable TOC that would lead to a specific page of different PDFs within a folder.
Is that possible?
Secondly, is is possible to create a search box that upon typing a specific word (not related to text within the PDFs), that word to be linked to a specific page of a particular PDF out of many within a folder?
To make it more clear, I have a database of specifications of equipment and drawings of a building, all in multiple PDF files. I would like to be able to unify all those PDFs and if I type the room number of the building to be presented with a menu of choces pointing to services assosiated with that room, being elctrical power drawings, lighting drawings or drawings of Air Conditioning and Ducting associated with that room. So I type a room number, then I get a menu of Power, Lights, Fire Alarm, or Ducting all associated with that room, then if I click Fire Alarm to be directed straight to the drawing within a PDF related to that room.
Thanks

I would say: Try and Error. Create a copy of your document and unmark in the copied document in the document inspector all boxes for the TOC. Then mark them again. Maybe you should also delete the paragraph styles and mark them again. If that doesn't work, try to copy the complete text of your document to a new created one. Maybe that works.
Good luck!
P.S.: If that doesn't work look here. Maybe this helps.

I have backed my iTunes with over 10,000 songs on a hard drive and than i reset my computer to factory settings, when i put it back on my macbook pro only 2030 were able to be downloaded back to the same computer

i have backed my iTunes with over 10,000 songs on a hard drive and than i reset my computer to factory settings because my email was hacked, when i downloaded the music back to my macbook pro only 2030 were able to be downloaded . how can i download all my music back?
michel p.

I usually err on the sideof caution when someone says "downloaded" and take it to mean anything fro actually downloaded, to copies, to imported, to moved (frolder to folder), but even if they were "downloaded"... if the old email was hacked, and subseuqently closed out, that leaves the downloaded files "orphaned" if you will, belonging to the old ID. So, while they may be on the HD, they're inaccessible now.
One of the biggest reasons I NEVER keep anything in my library with DRM employed in it. I bought it. I own it. I'm not going to get locked out of it.

My zagg key board connects but the keys I type either don't type character, type 2 characters that are different when I hit only 1 key, or doesn't type at all. Is there a way to reset zagg keyboard to factory settings?

My zagg key board connects but the keys I type either don't type character, type 2 characters that are different when I hit only 1 key, or doesn't type at all. Is there a way to reset zagg keyboard to factory settings?

Recharging is a good thing to try. They do start to act odd when the battery gets low. Beyond that, just like Tom says, contact Zagg. I have one of their keyboards and the company has wonderful customer service.

AEXPR N: no configure, no factory reset

Hi all,
This is a weird one. Today I bought my 6th AEX in succesion, my first N. I configured it to join my AEXTR N network and that worked ok, but now I'm not able to administer the AEXPR from the Airport-configuration utility. It shows up in the list and the light is green, but it just times out when I try to connect. I noticed it when I tried to update the firmware to 7.3.1.
So I tried a factory reset: unplug, press reset button, plug in, while keeping the button pressed, wait for the green light to blink four times, release. But that also doesn't work as documented.
When I plugin the AEXPR with the reset button pressed it starts with a second of green, then ± 4 seconds of amber and then it start flashing amber for a minute. After about a minute the light goes off, until you release the reset button. It start booting as normal, and shows up in the list of devices of the Airport-configuration utility. But still no way to connect...
Should I return the thing as Doa, or does one of you have a magic trick to offer?
Thanks!
Jan David

I'm getting the same light sequence with my Airport Express. Any thoughts out there? I can't get it to reset. 8-(

Create a specific reset configuration - different than factory reset

Similar Messages

Maybe you are looking for