Create a symbol with appearance fx and scale?

Hi everyone. I have create a button with gradient high / low lights. stroke and curved edge, all built in the appearance pallette. I then saved the graphic as a symbol. I would like to use this on other artwork. But for some reason when placed in other files, if I scale (all the documents have the prefs scale fx). The symbol doesnt keeps its shape? Even is I expand the round edges it still seems to be a problem.
I can place the illustrator file into illu and scale this way, but why isnt the symbol keeping the fx settings?
ill CS5.5
Thanks
Rob

Rob,
You may need to untick Align to Pixel Grid in the Transform panel, and untick the option for new objects (in Transform options). Also, you may use a document type that does not have Align to Pixel Grid as default, or change the default.

Similar Messages

My ipad battery ran out while verifiying the last update. Now all I see on the screen is the plugin symbol with an arrow and the itunes symbol. Help!

Help, as above, lost power part way though verifiying last update.
Now all i see is the plugin symbol with an arrow, and the itunes symbol
in the middle of a black screen.
Does anyone have any ideas? I've tried powering down, with no luck.
Help, please, or should I just box it up and send to repair center?

CREEEP wrote:
Now all i see is the plugin symbol with an arrow, and the itunes symbol in the middle of a black screen.
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
Restoring > http://support.apple.com/kb/HT1414
3: If the device doesn't appear in iTunes, try using the Steps in this article to force the device into Recovery Mode.
Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download
Note on Recovery Mode.
You may need to try this More than Once... Be sure to Follow ALL the Steps...
After you have Recovered your Device...
Re-Sync your Content or Restore from the most Recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766

How to create a contract with one supplier and two dealers?

Hi Gurus,
I have a contract with a supplier (eg. Apple), but the products and services are supplied by two dealers.
The supplier is the manufacturer and with whom the negotiation of prices is made.
The dealers are those who make the delivery of the products and services and who the payment is done.
How can I create a contract with these characteristics in SRM 7.0?
I don't want to create two contracts with same products and services for two suppliers (Dealer_1 and Dealer_2).
How can this be handled through business partner type "Vendor"?
In "Partner" section in "Header" --> "Basic data", I can only add 1 vendor.
The system is:
Component software: SRM_SERVER
Release: 700
Level: 0008
Support package: SAPKIBKV08
Thanks in advance and best regards,
Alonso Valenzuela

Hi Wadim,
I have a similar requirement to create order lines in an existing contract with reference using BAPI_CUSTOMERCONTRACT_CHANGE. The order lines get created in the contract. However, the condition types from the order line which i'm referencing are not getting referenced and are not getting added in the Contract's line after referencing.
Did you come across any such issue ? If yes , could you suggest the solution ?
Regards,
Venkat.

HT204088 Dear sirs, Could you please help me on my problem with my apple ID I create new account with security questions, and when I try to purchase paid application,it ask me for answers the questions but it's not working, My account have 50$ and stil

Dear sirs,
Could you please help me on my problem with my apple ID
I create new account with security questions, and when I try to purchase paid application,it ask me for answers the questions but it's not working,
My account have 50$ and still didn't buy anything

You need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
(100546)

How to create a table with datatype blob and insert a pdf file (ravi)

how to create a table with datatype blob and insert a pdf file,
give me the explain asap
1.create the table?
2.insert the pdffiles into tables?
3.how to view the files?
Thanks & Regards
ravikumar.k
Edited by: 895044 on Dec 5, 2011 2:55 AM

895044 wrote:
how to create a table with datatype blob and insert a pdf file,
give me the explain asapPerhaps you should read...
{message:id=9360002}
especially point 2.
We're not just sitting here waiting to answer your question as quickly as possible for you.

Problem creating a table with a subquery and a dblink

Hello!!
I have a little problem. When I create a table with a subquery and a dblink, for example:
CREATE TABLE EXAMPLE2 AS SELECT * FROM EXAMPLE1@DBLINK
the table definition is changed. Fields with a type of CHAR or VARCHAR2 are created with a size three times bigger than the original table in the remote database. Field of type DATE and NUMBER are not changed. For example if the original table, in the database 1, has a field of type CHAR(1) it is create in the local database with a type of CHAR(3), and a VARCHAR2(5) field is created with VARCHAR2(15).
Database 1 has a WE8DEC character set.
Database 2 has a AL32UTF8 character set.
Could it be related to the difference in character sets?
What can I do to make Oracle use the same table definition when creating a table in this way?
Thanks!!

That is related to character sets, and probably necessary if you want all the data in the remote table to be able to fit in the new table.
When you declare a column VARCHAR2(5), by default, you're allocating 5 bytes of storage. In a single-byte character set, which I believe WE8DEC is, that also happens to equate to 5 characters. In a multi-byte character set like AL32UTF8, though, 1 character may require up to 3 bytes of storage, so you'd need to allocate 15 bytes to store that data. That's what's going on here.
You could still store all the data if you create the table locally by explicitly requesting 5 characters of storage by declaring the column VARCHAR2(5 CHAR). You could also set the NLS_LENGTH_SEMANTICS parameter to CHAR rather than BYTE before creating the table, but I believe that both of these will only apply when you're explicitly defining columns as part of your CREATE TABLE. I don't believe either will apply to CTAS statements.
Justin

How to create a matrix with constant values and multiply it with the output of adc

How to create a matrix with constant values and multiply it with the output of adc

nitinkajay wrote:
How to create a matrix with constant values and multiply it with the output of adc
Place array constant on diagram, drag a double to it, r-click "add dimension". There, a constant 2D double array, a matrix.
/Y
LabVIEW 8.2 - 2014
"Only dead fish swim downstream" - "My life for Kudos!" - "Dumb people repeat old mistakes - smart ones create new ones."
G# - Free award winning reference based OOP for LV

How to create 2D array with 3 rows and unlimit column?

how to create 2D array with 3 rows and unlimit column?

Here are images of what I described in my previous post
Message Edited by JoeLabView on 11-14-2007 07:56 AM
Attachments:
2D-array_code.PNG ‏7 KB
2D-array_values.PNG ‏13 KB

Motion how to create 3d effect with a background and one primary object

motion how to create 3d effect with a background and one primary object

… like that?
http://youtu.be/yOht1GJpEm4

I created a iMovie with photos, music and titles; shared it with the media browser and burned it on a DVD RDL. The disc will play on my MacBook Pro, but it will not play on my Samsung Blu-ray Disc Player or a smaller portable DVD player. Why?

I created an iMovie with photos, music and titles; shared it with the media browser and burned it on a DV+RDL. The disc will play on my MacBook Pro, but it will not play on my Samsung Blu-ray Disc Player or a smaller portable DVD player. Why?

Probably because they don't accept that media.
Try using Verbatim DVD+DL (if your project exceeds 2 hours) or Verbatim DVD-R if it doesn't.

I bought my daughter an ipad mini and used my Apple ID to transfer over her favorites. Now I can't use netflix and hulu. So I want create her an id but it won't let saying too young. I tried to create another one with my age and it still says too young.

I bought my daughter an ipad mini and used my Apple ID to transfer over her favorites. Now I can't use netflix and hulu. So I want create her an id but it won't let saying too young. I tried to create another one with my age and it still says too young.help!!!

iTUNES STORE - TERMS AND CONDITIONS
"This iTunes Service is only available for individuals aged 13 years or older, unless you are under 13 years old and your Apple ID was provided to you as a result of a request by an approved educational institution. If you are 13 or older but under the age of 18, you should review this Agreement with your parent or guardian to make sure that you and your parent or guardian understand it."
Restart the iPad. Tap Settings > iTunes & App Store then sign in your Apple ID.

Has anyone been able to create a HtmlDataTable with dynamic col and rows?

Has anyone been able to create a HtmlDataTable with dynamic col and rows?
If so please explain. I am successfully able to dynamically add columns using the getChildren method of the htmldatatable object
BUT for each new column created no data is displayed.
I am only able to display data for columns originally created when i clicked and dragged the dataTable icon from the pallette in netbeans visual web kit.
Any help on this is greatly appreciated. I have been searching the web and these forums for around 8 hours and no one seems to have a working example of this. Lots of similar posts asking how to do it though :(
Thanks in advance.

This might be useful: http://balusc.xs4all.nl/srv/dev-jep-dat.html

Hi I created a EPUB with indesign cc and I'm trying to submitted it to iTunes Producer

Hi I created a EPUB with indesign cc and I'm trying to submitted it to iTunes Producer and only thing that happens is the little wheel keep spinning and spinning and spinning can you help? And is there a way to decrease the size of my EPUB I'm getting a message saying that it is over 200 MB?

You haven't said if you're on a mac or PC. I understand that on a PC you can directly open an EPUB. But, as I am on a Mac I need a utility. I use a little app called EPUB Unzip and then to zip it back up you'll need EPUB zip. Just search on Google for them. They are open source (free). Or you can use Sigil to get into the EPUB without unzipping. Sigil is good, but does change the file structure a little bit, and for that reason some people don't like it. For a reflowable EPUB it doesn't matter much. Though I don't think I'd open a fixed layout EPUB with it. Sigil is also open source—it's very easy to use, too.
You'll also want an EPUB validation app. I use Pagina EPUBcheck 3.01 (open source). Or you can use the free online checker here: EPUB Validator (beta) though it's for SMALL files. I like Pagina because it suggests fixes for errors—even though those fixes may be completely greek to you and me.
Finally, I really suggest you get a subscription to Lynda.com and watch everything Anne Marie Concepcion has ever done on EPUB. While not the be all and end all, her knowledge is a very good place to start. Lynda.com is $25 per month but you can quit anytime (though um, I haven't, because well it's kind of addicting). So, even if you only use it for a month, you'll learn a ton and it'll be well worth it.
Lest I sound like some kind of freakin' expert, let me assure you this is a long and painful process, with little help out there for us "non-programmer" types who've been thrown in the lion's den. I am still learning everyday, by my own wits it sometimes seems. Even today I am learning (most painfully yet) how to program a fixed layout read-abound book by trial and error, because even after BEGGING Adobe ON BENDED KNEES we don't have support for read-aloud and according to insiders hereabout they have NO PLANS to give us that. Yes. I am going to continue to whine about it, frequently.
It's late, and I've already had a glass or two of wine. (Not that you'd notice. ) Good luck on your journey. (Only 8 more circles of hell to traverse, so I've heard.)

Creating computer Names with small letters and they appear as capitals in Active Directory Domain

Hello,
When I try to create computer objects in Active Directory - namely when i change computer name with small letters, in active directory users and computers they appear as capital letters and in DNS console as well.
I know that it's not a problematic issue and technically all goes fine but, i want to know the reason.
Is it possible to change computer name with small letters while joining in the domain and than in AD it appear with small letters also ?
Thanks in advance,

If you are asking about during the client join process, I believe the machines do all caps and you have to accept that as default. I'm guessing it is a legacy issue for older clients that has hung on such as possibly related to WINS.
Paul Bergson
MVP - Directory Services
MCITP: Enterprise Administrator
MCTS, MCT, MCSE, MCSA, Security, BS CSci
2012, 2008, Vista, 2003, 2000 (Early Achiever), NT4
Twitter @pbbergs http://blogs.dirteam.com/blogs/paulbergson
Please no e-mails, any questions should be posted in the NewsGroup.
This posting is provided AS IS with no warranties, and confers no rights.

Powershell to create pop box which then creates a folder (with entered value) and sub folder with specific security

Hi All,
Complete novice to powershell would love some help to assist a new windows storage workflow I am implementing.
I have a windows server 2012 file server (\\FS01) and projects share \\fs01\projects.
We use job numbers to create a project and name the folders with the job num (eg Job Num XX12345 , \\fs01\projects\XX12345)
Then after each project folder is created we will create 4 subfolders underneath and specify the following rights to the following AD groups.
Folder Name - AD Group- Permission
Scoping - Project_Management -RW
Delivery - Project_Management -R
Finance - Finance- RW
Assets - Creative - R
I would like to create a script that lives in the route of \\FS01\Projects and when clicked a pop up box appears, the end users enters the job code and then the script sets up the folder with the entered value and creates sub folders with the referenced
AD groups and security.
Any help would be awesome!
Sammy

Start by learning how to write PowerShell scripts. What you are asking is a whole complex list of requirements. This is a forum and not free consulting or training.
Workflows are complex beasts that require a good knowledge of PowerShell. Now is the time to start your training. I recommend starting with a good book and taking your time learning PowerShell step-by-step.
¯\_(ツ)_/¯

Create a symbol with appearance fx and scale?

Similar Messages

Maybe you are looking for