Create a Technical System Web AS Java
Hi guys,
Anyone knows how to create a Technical Sys Web AS Java like we usual do with RZ70?
Thanks in advance,
Ricardo.
Hi -
Using the VA corresponding to the Web AS Java system, goto the SLD Data Supplier service, then Runtime tab->HTTP Settings tab (bottom). fill in required parms and save. To trigger an initial send, use the button ("This triggers data transfer to SLD...") - left most button on upper toolbar of service. Check your SLD for tech system creation.
Regards,
Jin
Similar Messages
-
Creating technical system Web As java
Hi All
I am creating a new technical system Web As Java in SLD.Can anybody please tell what "Installed Products" I need to select to create the system
Regards
PawanHi
If ur creating a new Web AS Java technical system...I hope u would have already defined the corresponding software components and the product for that particular system...U should add this product which was created.
Hope i got it right..Do let me know if u have further queries
Regards
Krishna -
SLD-Technical system -Web AS Java
Dear All,
I am able create techinical system for Web As ABAP. And want to create Web AS Java. Will you please explain me procedure.Hi,
Ideally you should not create any technical system manually. When you go to SLD Administrstion --> profiles --> Data supplier, here you enter your backend server specific data for e.g. host name, instance number etc, and then you restart your SLD.once this is done successfully then your technical system automatically gets available under Technical Syatems. you should follow the same for JAVA system.
Regards,
Ameya -
How To Create A Technical For Web AS ABAP ???
Hi experts,
How to Create a Technical System For Web AS ABAP in SLD, Using "SLDAPICUST" And RZ70 Transaction Codes.
Please Give me Complete Steps And Support to Create TS in SLD Successfully
<b>If Ur Answers Are Help full Means Points will be Rewarded</b>
Regards
KhannaHi Prateek,
I Did the Things Which is Presented By Michal in This Blog.
But When I Executed RZ70 With My Gateway Service as "sapgw01" And the Gateway Host As "Server Host Name".
I Got the Error When I Click on "<b>start Data Collection"</b> After Execution of the Program As Follows
<b>"Used RFC destination :SLD_NUC"</b>
<b>"RFC call failed : Error opening an RFC connection"</b>
<b>"Batch job not scheduled"</b>
All Other Are Success Like Data Collection ......
Please let me Know What to Do Now...
Regards
Khanna -
Database tab is not filled in SLD after I create a technical system abap
Hi guys,
why is it? what do I have to set up to have this tab filled with valid values?
Thank you
OlianHi,
For technical system of type WebAS ABAP, you do not create it manually in SLD......instead its process is to log into R/3 system and run transaction RZ70 and from this transaction technical details of R/3 system are published to SLD of XI..........this is a basis activity and so you can ask your basis guys to do it for you...........then when it is done, then your Web AS system will be created in technical system in SLD with all the data filled properly.
Regards,
Rajeev Gupta -
Creating sales order using web dynpro JAVA
Hello everyone,
i am new to web dynpro. Can any one tell me how to creating sales order by web dynpro JAVA using BAPI.
Thanks.
Vinita SharmaHi...
you can use Adaptive RFC methodology in web dynpro java to work with BAPIs..... these are standard bapi's provided
Here are required Bapis... select which one you want....
BAPISDORDER_GETDETAILEDLIST Sales Order: List of All Order Data
BAPI_ORDER_CHANGE_STATUS_GET Change status for order
BAPI_SALESDOCU_CREATEFROMDATA Creating a Sales Document
BAPI_SALESORDER_CHANGE Sales Order: Change Sales Order
BAPI_SALESORDER_CREATEFROMDAT1 Sales Order: Create Sales Order
BAPI_SALESORDER_CREATEFROMDAT2 Sales Order: Create Sales Order
BAPI_SALESORDER_CREATEFROMDATA Create sales order, no more maintenance
BAPI_SALESORDER_GETLIST Sales order: List of all orders for customer
BAPI_SALESORDER_GETSTATUS Sales order: Display status
BAPI_SALESORDER_SIMULATE Sales Order: Simulate Sales Order
check this thread SALES ORDER creation using BAPI
sample java program which will call SAP bapi function sales order create
PradeeP -
How to create role(s) in Web As Java?
Hi there,
Can you please tell me how to create roles and assign to a user in Web AS Java Standalone system? I know How to do it if it is Dual Stack...but not with Standalone java System?
Thanks In Advance
KumarHello Kumar,
I guess by by dual stack you mean an ABAP+JAVA environment right?
Anyways, in a JAVA only schema, if you are using your user store as UME, you can create the roles in UME through the browser by logging in as J2EE_ADMIIN or a suer with equivalent authorizations.
on the other hand you can create J2ee roles in Visual administrator(VA). For that you need to login to VA and go to the service Security provider. There you will find the option to create roles. But please be advised that the actions (equivalent of authorizations in ABAP stack) should already have been defined by your programmers before you can go ahead with the task of creating roles.
One morething, each J2EE role can contain only one action.
Where as in UME roles you can group them together.
Regards,
Prashant -
Create external window in Web Dynpro Java
Hello experts,
I am new in web dypro java as well as enterprise portal. I have a problem concerning external window.
I have created a button in my ivew in web dynpro java. By a click on this button, I would like to open an external window with a specified URL(ex: www.google.com).
Could you help me how to do it please?
Thanks in advance,
SenglyHi experts,
I have found the solution. Thanks to this link and thanks to all:
[Problem with linkToURL in a table column|Problem with LinkToURL in a table column;
best,
Sengly -
Create PCD folder using web dynpro Java
Hi All ,
I would like to create pcd folder structure using web dynpro java
i.e. My folder at top level and under this there will be iviews , roles , worksets etc.
Is it possible using WDJ ?
I have checked the below link , but for folders I did not get anything.
http://help.sap.com/saphelp_nw04/helpdata/en/44/6aaf92f5a23672e10000000a114a6b/frameset.htm
Can you please help me ?
Thanks,
SandipHi,
Please refer to the following document
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/508baf88-9335-2d10-efa6-c6ad61e5fc4b?quicklink=index&overridelayout=true
The same can be implemented in webdynpro also.
Regards,
Raju Bonagiri
Edited by: Raju Bonagiri on Sep 3, 2010 8:36 AM -
Unable to create a technical system
Hi
I deleted a technical system and try to create the same but it is showing error
CIM_ERR_ALREADY_EXISTS: Instance already exists: SAP_BCClient.CreationClassName="SAP_BCClient",Name="620.SystemName.SRD.SystemLicenseNumber.0020471770.SystemHome.dbd106
i tried to deleted the components in content maintainance also(in administration),still i am getting same problem,
what other things i have to do,can anybody suggest
regards
raghuHi
Look this similar thread will solve your problem
CIM_ERR_ALREADY_EXISTS -
Eror Creating New Technical System in portal(SLD)
Hi creating SLD through Techinal system(in portal).When i click to register Message server to enter message server name and port ,it is displaying a below error:-
Please help me out
Error Summary
While processing the current request, an exception occured which could not be handled by the application or the framework.
If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
Root Cause
The initial exception that caused the request to fail, was:
com.sap.tc.webdynpro.progmodel.context.ContextException: Node(TechnicalSystemDetailView.ABAPSystemDetail.MessageServer.LogonGroups): cannot bind or add elements because the node has no valid parent
at com.sap.tc.webdynpro.progmodel.context.Node.prepareAddElement(Node.java:656)
at com.sap.tc.webdynpro.progmodel.context.Node.addElement(Node.java:635)
at com.sap.sld.wd.technicalsystem.TechnicalSystemDetailView.onActionNewLogonGroup(TechnicalSystemDetailView.java:616)
at com.sap.sld.wd.technicalsystem.wdp.InternalTechnicalSystemDetailView.wdInvokeEventHandler(InternalTechnicalSystemDetailView.java:974)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
... 28 more
See full exception chain for details.
System Environment
Client
Web Dynpro Client Type HTML Client
User agent Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.1; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; MS-RTC LM 8; InfoPath.3)
Version null
DOM version null
Client Type msie7
Client Type Profile ie6
ActiveX enabled
Cookies enabled
Frames enabled
Java Applets enabled
JavaScript enabled
Tables enabled
VB Script enabled
Server
Web Dynpro Runtime Vendor: SAP, build ID: 7.0106.20091119084951.0000 (release=NW701_06_REL, buildtime=2010-01-06:15:21:34[UTC], changelist=75637, host=pwdfm246), build date: Mon Jan 10 02:17:55 SGT 2011
J2EE Engine 7.01 PatchLevel 75592.
Java VM IBM J9 VM, version:2.3, vendor: IBM Corporation
Operating system AIX, version: 6.1, architecture: ppc64
Session & Other
Session Locale en_US
Time of Failure Wed Feb 23 16:53:12 SGT 2011 (Java Time: 1298451192938)
Web Dynpro Code Generation Infos
sap.com/tcsldwd~main
SapDictionaryGenerationCore 7.0103.20081105084127.0000 (release=NW701_03_REL, buildtime=2008-12-07:13:07:33[UTC], changelist=51195, host=PWDFM246.wdf.sap.corp)
SapDictionaryGenerationTemplates 7.0103.20081105084127.0000 (release=NW701_03_REL, buildtime=2008-12-07:13:07:39[UTC], changelist=51195, host=PWDFM246.wdf.sap.corp)
SapGenerationFrameworkCore 7.0103.20081105084147.0000 (release=NW701_03_REL, buildtime=2008-12-07:12:57:57[UTC], changelist=51200, host=PWDFM246.wdf.sap.corp)
SapIdeWebDynproCheckLayer 7.0103.20081105084705.0000 (release=NW701_03_REL, buildtime=2008-12-07:13:12:47[UTC], changelist=51248, host=PWDFM246.wdf.sap.corp)
SapMetamodelCommon 7.0103.20081105084336.0000 (release=NW701_03_REL, buildtime=2008-12-07:12:58:37[UTC], changelist=51222, host=PWDFM246.wdf.sap.corp)
SapMetamodelCore 7.0103.20081105084336.0000 (release=NW701_03_REL, buildtime=2008-12-07:12:58:33[UTC], changelist=51222, host=PWDFM246.wdf.sap.corp)
SapMetamodelDictionary 7.0103.20081105084131.0000 (release=NW701_03_REL, buildtime=2008-12-07:13:05:17[UTC], changelist=51196, host=PWDFM246.wdf.sap.corp)
SapMetamodelWebDynpro 7.0103.20081105084716.0000 (release=NW701_03_REL, buildtime=2008-12-07:13:09:57[UTC], changelist=51249, host=PWDFM246.wdf.sap.corp)
SapWebDynproGenerationCTemplates 7.0103.20081111115141.0000 (release=NW701_03_REL, buildtime=2008-12-07:13:20:57[UTC], changelist=51958, host=pwdfm246)
SapWebDynproGenerationCore 7.0103.20081105084705.0000 (release=NW701_03_REL, buildtime=2008-12-07:13:12:51[UTC], changelist=51248, host=PWDFM246.wdf.sap.corp)
SapWebDynproGenerationTemplates 7.0103.20081111115141.0000 (release=NW701_03_REL, buildtime=2008-12-07:13:20:57[UTC], changelist=51958, host=pwdfm246)
sap.com/tcsldwd~landscape
SapDictionaryGenerationCore 7.0103.20081105084127.0000 (release=NW701_03_REL, buildtime=2008-12-07:13:07:33[UTC], changelist=51195, host=PWDFM246.wdf.sap.corp)
SapDictionaryGenerationTemplates 7.0103.20081105084127.0000 (release=NW701_03_REL, buildtime=2008-12-07:13:07:39[UTC], changelist=51195, host=PWDFM246.wdf.sap.corp)
SapGenerationFrameworkCore 7.0103.20081105084147.0000 (release=NW701_03_REL, buildtime=2008-12-07:12:57:57[UTC], changelist=51200, host=PWDFM246.wdf.sap.corp)
SapIdeWebDynproCheckLayer 7.0103.20081105084705.0000 (release=NW701_03_REL, buildtime=2008-12-07:13:12:47[UTC], changelist=51248, host=PWDFM246.wdf.sap.corp)
SapMetamodelCommon 7.0103.20081105084336.0000 (release=NW701_03_REL, buildtime=2008-12-07:12:58:37[UTC], changelist=51222, host=PWDFM246.wdf.sap.corp)
SapMetamodelCore 7.0103.20081105084336.0000 (release=NW701_03_REL, buildtime=2008-12-07:12:58:33[UTC], changelist=51222, host=PWDFM246.wdf.sap.corp)
SapMetamodelDictionary 7.0103.20081105084131.0000 (release=NW701_03_REL, buildtime=2008-12-07:13:05:17[UTC], changelist=51196, host=PWDFM246.wdf.sap.corp)
SapMetamodelWebDynpro 7.0103.20081105084716.0000 (release=NW701_03_REL, buildtime=2008-12-07:13:09:57[UTC], changelist=51249, host=PWDFM246.wdf.sap.corp)
SapWebDynproGenerationCTemplates 7.0103.20081111115141.0000 (release=NW701_03_REL, buildtime=2008-12-07:13:20:57[UTC], changelist=51958, host=pwdfm246)
SapWebDynproGenerationCore 7.0103.20081105084705.0000 (release=NW701_03_REL, buildtime=2008-12-07:13:12:51[UTC], changelist=51248, host=PWDFM246.wdf.sap.corp)
SapWebDynproGenerationTemplates 7.0103.20081111115141.0000 (release=NW701_03_REL, buildtime=2008-12-07:13:20:57[UTC], changelist=51958, host=pwdfm246)
sap.com/tcsldwd~technicalsystem
SapDictionaryGenerationCore 7.0103.20081105084127.0000 (release=NW701_03_REL, buildtime=2008-12-07:13:07:33[UTC], changelist=51195, host=PWDFM246.wdf.sap.corp)
SapDictionaryGenerationTemplates 7.0103.20081105084127.0000 (release=NW701_03_REL, buildtime=2008-12-07:13:07:39[UTC], changelist=51195, host=PWDFM246.wdf.sap.corp)Will suggest opening an OSS message.
Nikhil -
SLD - Technical System Wizard - Select System: Only None (Standalone J2EE)
Hi, I want to connect to some RFC-Modules on a SAP/R3 System from my NetWeaver Web DynPro Application. Therefore I have to create JCO-Connections for the Models I created (MODELDATA_DEST and RFC_METADATA_DEST). For this I have to define the System I want these JCO-Connections to connect to in my SLD which I'm trying to do using the "Technical System Wizard". (SLD -> Technical Landscape -> New Technical System -> Web AS Java (because I'm developing a Java Application).
In the next screen I have to specifiy the location of my Server. I thought, that here, I have to define my SAP/R3 Server to which the JCO-Connections for my two models shall be connected. But the only option I can choose for "Web AS ABAP" (The ABAP System where my RFC-Modules are stored I guess) is "None (Standalone J2EE)".
Why is that? Or am I missing something? I thought I have to specify the SAP/R3 System containing the RFC-Modules here and not my local NetWeaver Server.
Thanks for your help
ThomasHi,
there seems to be a misunderstanding here. For JCO to work you need to set up the ABAP-System as a technical system in SLD, otherwise the Java-System is not able to determine information like Hostname and Portnumber for the RFC. Of course it's good to set up your WAS-Java in SLD as a technical system as well, but for the JCO the ABAP side is more important as far as I can see.
To have a clean start I suggest that you set up all involved technical systems in your SLD.
Regards,
Jörg -
Only one business system for outbound java proxies?
Hi!
I have a problem regarding java proxy runtime JPR.
When I call the deployed outbound proxy from a client program, the java proxy sender service is always one defined business system. even if that has nothing to do with the business systems used by the proxy.
For example: I define a business system on the Web AS, which is responsible for the java proxy communication, this is the bean defacto. When I call this bean from a client the JPR calls the Integration Server using another business systems channel. Of course I get the runtime exception service unavailable, because it is not used in interface determination, as the sending channel. If I use the 'working' business systems channel it works just fine
I hope you get my problem.
If I enter the Adapter Monitor, then choose the JPR I can see under Cache that the working business system has several entries here.
Where is the difference between the one working system and others, has anybody ever faced this problem?
regards
StefanWhen you call an outbound java proxy bean, the sender business system is usually derived from the business system which is connected to the technical system Web AS Java in SLD.
If you want another sender business system, then you can set this with the application program with help of the message specifier class (look at manual for further details).
I recommend writing a wrapper bean around the generated proxy bean classes to enable the sending application program to provide the business system as a parameter. In that way different senders can provide their business system separately.
Regards
Stefan -
Problem while creating WebAS ABAP Technical System in WAS 7
Hi All,
I have installed WAS 7 and EP 7 SP9 as part of SR2 Installation. I had checked the option configure local SLD. I have to create and SLD to conenct EP to ECC 6.
When I was creating the Technical System, at the last step i found out that ECC 6 was not available in the installed products(only ECC 5 was available). So i Upgraded CR Content to SAP_CR 3.2 and CIM to 1.5.20. When I am trying to create the Technical System again I do find ECC 6.0 in the Installed Products but there are no corresponding Installed Components for ECC 6.(The same exists for ECC 5). as a result I am not able to create the Technical System as atleast one component has to be selected. I have tried re importing the CIM Model and cr content again but its not working.
When I select SLD Data Supplier in Visual Admin I get the following error message.
Error While loading service SLD Data Supplier
java.lang.ClassNotFoundException: com.sap.sldserv.vaclient.ClientManagement
Is there any solution to this. Points will be given.
Regards,
Shyam.
Message was edited by:
Shyam R Nairhi,
use th following thread,
No products installed while adding a Technical ABAP System in the SLD.
Regards
Jayapriya -
How to create Technical System in SLD configuration?
Howdy!
Our R/3 system has not packed with proper plugin so I can not use T-code rz70 to transfer system info from R/3 to SLD.
I try to create a technical system manually in SLD web UI.But in the last step of creation(ABAP based system),after I had choose the "installed product",which is SAP R/3 4.6c,"installed software component" didn't show on the right side panel as expected.
Anybody can tell me how to slove this?
Thanks indeed...There are a few notes on http://service.sap.com/notes that may help you with this! Try note number 584654.
What version is you kernel?
I think it needs to be at least 6.30.
J2EE Engine >= 6.30 on Windows and Unix platforms
Web AS >=6.40 SP4
Also try this Problem analysis guide:
http://help.sap.com/saphelp_nw04/helpdata/en/71/7ffb3f6c78ee28e10000000a1550b0/frameset.htm
Maybe you are looking for
-
Javaload and grant_permission problems
c:\Java>loadjava -thin -resolve -verbose -user user/test@test1:1521:orcl EmpInsert.jar error as following: initialization complete loading : EmpInsert_SJProfile0 creating : EmpInsert_SJProfile0 Error while creating class EmpInsert_SJProfile0 ORA-2954
-
What is the best way to clean up your mac and make it faster and run to an optimum level?
Hi Everyone, Hope all is well Iv been running my mac pro for a long time now, its a Mac pro, 2x 2.26 GHz Quad Core Intel Xeon. 12 GB 1066 MHz DDR3 Ram Over time now it has become slower, at the moment its still running fine but im sure over time it h
-
Stock posting of Insp. lot in alternative unit of measure
Dear All, I have a material whose Base unit of measure is Ton and alternative unit is PCS. There is an insp. lot of 10 Ton. Now i want to do its stock posting in PCS. So how can i do that.
-
Does not start its download.
Good day, I'm sort of new to the buying of apps in the Apple Store and so I just bought this OS X Mountain Lion and the buying of the app was a success. Although, it does not start its download. As far as I know, our internet connection is perfectly
-
last 6 months back brought i pod for 50$, but i came to know that,the product is vintage model, hence no support from apple, now problem is that ipod is not working, and the serial number is <edited by host>,can u pls reach me on <edited by host>