Create a Tool to create Opportunity.

Hello All,
We have two types of Opportunity A & B. Some times Users have to discontinute Opportunity B and Create Opportunity A instead for the same customer .So just to make things easier they want a Tool where we can automate the process of creating Opportunity B from A or vice versa.The main difference between them is that Opportunity B has territory Data.
Can anyone confirm if we can create a tool for this.If yes can anyone please explain .
thanks,
Kitcha.

Hi Kitcha,
I m not very much clear about what u required exactly but if u want to create Opportunity transaction with same Customer and other data i.e. from A to B and vice versa you can simply use Copy Control for transaction.
SPRO->Customer Relationship Management->Transactions->Basic Settings->Copying Control for Business Transactions
Regards,
DD's

Similar Messages

Hi - I have a new tool to create a tactile experience for touch screen users. Great for early educational apps. Any idea of how to get it exposure?

Hi - I created new tool to create a tactile experience for touch screen users. Created it for son with auditory processing problems and dyslexia. Great for early educational apps. or just for fun. Any idea of how to get it exposure? Thanks for you help!

Hire a marketer, perhaps? Put it up on Amazon? Only not here, that would be in direct violation of the term of use.

Unable to use B2B Document Editor tool to create guideline from data file

Does anyone successfully used the B2B Document Editor tool to generate the guideline doc from an HL7 data file ?
I attempted to use the SpecGenerator feature of this tool to create a guideline from the "a01.xml" sample file in the HL7 tutorials (came with the B2B installation" and the wizard kept on giving me "parsing errors" message below
"The data in the file could not be parsed. Please check the file to verify that it is valid and formatted correctly. This error can occur for one of the following reasons: A) The data file may be a Word document or have some other binary format. B) The envelope data may not be formatted properly. If this is an X12 data file, please verify that the ISA segment is the correct size (exactly 106 characters). If this is an EDIFACT data file, it must have either a UNA or begin with UNB. For other standards, verify that the envelope segments conform to the specified rules. C) The segment/record delimiters in the file are incorrect."
Any idea why ? I did not alter the sample file in anyway -- its format is exactly the same as when it was installed.
Any helps are appreciate !!

Hi,
I would suggest that you learn the B2B product starting with the HL7 tutorial. Start by importing the export files and follow the instructions to make the system work end to end.
Next, you want to configure for the HL7 tutorial manually using the ecs and xsd files provided in the HL7 tutorial directory. Again, ensure that the system work end to end after you have done the manual configuration.
Next, you create a new ecs and xsd file using the Document Editor from scratch and use them in your manual configuration. You can use the same doctype and version as in the tutorial so that you can be familiar with the Document Editor and at the end of this exercise, you know you have done things properly if the system works end to end. The documentation for Document Editor is mainly in the Windows Help section.
After the incremental steps above, you will have the knowledge to implement the document type and version of your project. Going straight into the requirements in your project makes it difficult to debug because they are too many moving parts.
Hope this helps,
Eng

What are the tools to create a digital magazine for ipad version and how can be place it in newsstand?

Hello..
"what are the tools to create a digital magazine for ipad version and how can be place it in newsstand?"
I am very tired after done a week of R&D on this issue..
But i doesn't get any fair solution for this one..
I hope this is best option to place my issue here to get quick solution..
Thanks and Regards..

We are all users here.
There is no one here from Apple.
In order for you to develop and distribute content for the iPad, you need to become an apps developer.
Not sure where you sign up for this or who you have to call.
There should be a place on Apple's site that refers to a section of the site if you want to be an Apple iOS content developer.
It cost, I believe $99 U.S. to become an Apple apps developer. You'll agree to Apple's Non-disclosure rules. You'll receive Apple's app/software developers kit,and access to Apple's app developer site.
No one here is going to be able to help you.
Good Luck.

What are all the different methods/tools for creating animations that work in IBA?

I've been developing HTML5 animations in Sencha and attempting to use the HTML widget in IBA. It's not going as seamless as I was hoping, and I was wondering if there are better methods/tools to create animations for IBA. In my opinion, the primary limitation is not in Sencha itself, it's more in the widget functionality in IBA.
I want the entire page to be an animation and drive the user experience, basically. Currently in IBA, the widget allows for successfully importing an HTML5 animation, but in more as a complementary role to the page instead of the primary content.
Any ideas?

Thanks Fabe - I agree 100%. However, in order to make fully dynamic books, animations can play a great role in bringing a book to life. (Admittedly, I may have to just build an app for what I'm trying to do)
Anyone else have any thoughts?

Is it possible to create a tool in sharepoint which generated a cv automaticaly?

Hi,
My experience in SharePoint is very low , that's why I ask your help.
I need to create a tool or document in SharePoint that will generate a curriculum vitae automaticaly.
Is this possible? If yes could you give me some more information?
Thanks in advance.
Kind regards,

Hi ,
You can definitely do that.You can create a list with columns you want.Then create a document library with same columns here.Then modify the word template and design you template and include the values as document field.
Then create a list workflow which would push the data into this library as soon as item is created in the list.
The below url would be helpful for the same
http://blogs.technet.com/b/brenclarke/archive/2009/04/15/automatically-create-word-documents-which-include-list-fields.aspx
Let me know if this helps

How do I turn off the curvature tool in CC, I chose the selection tool to create a box and the middle selector that allows you to adjust the size has disappeared?

How do I turn off the curvature tool in CC, I chose the selection tool to create a box and the middle selector that allows you to adjust the size has disappeared? My coworker discovered making ti a compound path by right clicking it and selecting it. All I want to do is adjust the size of a box. please advise.

You should post questions about using applications in the specific application's forum(s).
Here is a link to a page that has links to all Adobe forums...
Forum links page:
https://forums.adobe.com/welcome

Creating a Tool Bar

I am trying to create a new tool bar. The "create at tool bar" screen that comes up is so large, I can't click on the "Save" button because its off the bottom of the screen. It won't move and there aren't any controls to change the size. I even tried changing my screen resolution. Any advise?

Hi Debbie ,
Does the PDF appears so large as well or just the dialog box ?
Please check the page display settings.
Go to edit>Preferences>and check the Resolution and other things.
There is always an option to resize the page or any dialog box by placing the cursor on the edges and then as the it changes to a different icon you can move it is either direction to change the size .
Regards
Sukrit Dhingra

When I use the scissors tool to create a segment of a track, select the segment and bounce it, about 15-20 seconds of silence is added to the beginning of the resulting segment. What causes this?

When I use the scissors tool to create a segment of a track, select the segment and bounce it, about 15-20 seconds of silence is added to the beginning of the bounce. What causes this?

Thanks for the replies. I reviewed them shortly after they were submitted but I'm also working on other projects at the same time (hence the delayed reply).
Building a time table and doing a cross join to my original resultset gave me the desired resultset of the months assigned between dates. What I can't figure out now is how to filter months I don't want.
Doing a cross join between my original resultset that had two dates:
08/27/2010
10/24/2011
and a calendar table that has 24 rows (each month for a two year period)
my new resultset looks like this:
I need to filter the rows in yellow as the months assigned for stage 3 that started on 8/27/2010 should stop when the patient was assigned to stage 4 on 10/24/2011.
You'll notice that Jan - Sept 2011 isn't listed for Stage 4 assigned on 10/24/2011 as I included a filter in the WHERE clause that states
the Months Assigned value must be greater than or equal to the date assigned value.
Any advice would be appreciated.

Create user tools

Hello,
I have created a sequence file that takes sequence context as a parameter, and exports the local vairables of the calling sequence into an xml file. However, i want to keep this as a utility, just like the generic Import export. When i try to customize the tools menu, there are only four options - sequence,submenu,command and sequence file.
What i need is that, when i open up any sequence, and then click on the "Export to Xml..." on the tools menu, it should show the sequence context of the opened sequence file. When i try to to customise the tools menu, and make a new tools item "Export to XML..." as a sequence call to this sequence that i have designed that takes the sequence context as a parameter input, there is no way of passing this parameter to the sequnce call in this tools option.
In other words, i want the sequence context of the last opened sequence file to be passed to this new sequece call tool item as a parameter. Could you please help me out with how to acieve this. Is there any other way to design this tool item?
Thanks,
Aparna

Hi Aparna,
We have a shipping exampled located at C:\Program Files\National Instruments\TestStand 3.5\Examples\Tools that demonstrates how to create a tools menu item that edits the selected sequence file. Most tools use the RunState.InitialSelection subproperty that specifies the set of properties, steps, and sequences, as well as the file or execution that is selected or active when you start a new execution. Use this subproperty to grab references to step objects, sequence file objects, etc.
To find help on what the different elements in that subproperty represent, refer to the TestStand Help (Help >> TestStand Help; Then type initialselection in the index tab).
Hope this helps!
Best Regards,
Jonathan N.
National Instruments

Tools to create a Flash 7 SWF file from Powerpoint for deployment to 4305G?

Hi there,
We are using
4305G DMPs running firmware 5.2.1
DMM 5.2.2
We have an internal customer who wishes to find a tool to create Flash 7 (or Cisco DMS compatible Flash SWF) files from Powerpoint to deploy to the DMPs. The customer is currently using a tool called iSpring to create Flash SWF files out of Powerpoint files, but this will not display through the DMPs running 5.2.1 firmware.
http://www.ispringsolutions.com/ispring_presenter_pro_now_ispring_pro.html
What other options are available?
The underlying business need is to reduce the time it takes to create presentations for deployment to the Digital Media Players.
Any advice much appreciated,
Regards,
Kathy

Not sure if this helps but I use Camtasia's powerpoint plugin to convert presentations that have animation into video files in either swf/flv or wmv format. For standalone powerpoint presentations that do not include animations I simply use a program called PPTools which allows me to export high quality images from my presentations without losing any quality.

Create new survey data for opportunity using abap code

Hello to all,
I have one requirement.
create survey data for given opportunity ID using abap code. or copy survey data from one opportunity to another opportunity using abap.
any ideas..
many thanks
Babu

Hello Babu,
You can do this through the CRM_ORDER_MAINTAIN FM, this is the generic FM to edit any transaction in CRM.
The FM contains an internal table IT_SURVEY that must be filled. Actually, this table will only contain a reference to the (completed) survey, it doesn't store the data of the survey itself.
For some example coding, take a look at the SrvTSurvey.do controller. If you want to see what data is stored in the IT_SURVEY table, create a transaction and attach a completed survey to it (you can easily do it in the standard views of the webclient) and take a look at the survey structure in the CRM_ORDER_READ FM/Report.
Let me know if you need more guidance,
Reward points if useful,
Regards,
Joost

Creating a "Tool Tip" for an image

Is there a dreaweaver extension for creating a "tool tip" for
an image, or how do i create one?
Thanks for your help
Jim

Jim,
Put your tooltip text in the title attribute.
HTH,
Randy
> Is there a dreaweaver extension for creating a "tool
tip" for an image, or how do i create one?

Tool for creating batch jobs

Hello,
I need to create a batch job, which is having round about 90--100 steps, so is there any tool, by which i can create this quickly?
Please help me, this is little urgent.
Thanks,
Anand.

Hi anand,
CATT/ECATT is the best tool for creating batch jobs.
For more information on how to use these tools, go through the below links.
http://www.*********************/tutorials/secat.htm
http://www.*********************/tutorials/scat.htm
Regards,
Bharath

Creating a Tool like SE30

Hi All , I'm interested in creating a tool like SE30 which should show performance of a program or Tcode. But this should be in detail.
Something like ST03N which shows all the details but for entire Application Server, Where in Im interested in a Single TCode or a Program.
Im interested in displaying
1) Dispatcher Wait time.
2) Roll in & Roll out time.
3) Load + Gen time.
4) Database Time.
5) Buffer Access Time.
6) Roll wait time.
7) GUI Time.
8) Enqueue Time.
9) Processing Time.
10) CPU Time.
Similarly im also interested to display the memory related details. Also suggestions to the user to avoid using any statement which is overloading the CPU or memory.
Anyways for now im interested in displaying the above 10factors , Later i wouldlike to enhance with suggestions about the statements.
From which table do i fetch the above 10 things for a program or TCode.

seems that you confuse things.
The STAD has your data for the recent dialog steps (not only whole tcode), the ST03N shows the condensed data.
The SE30 is something completely different, it shows much finer details, less than statement level, and there you have no mixture, you have database events, buffer, generate ... These are the individual contributions to the totals of the STADs.

Create a Tool to create Opportunity.

Similar Messages

Maybe you are looking for