Create a transaction that will enter SM30 transaction

Hello all.
I have created a customer table in se11.
I want to create a transaction name with the same name as the new table, and that will leed me to SM30 transaction to maintainance option for that specific table.
I know that it is possible without creating a program for this.
Does anybody now how?
Thanks!

Hi,
Go to SE93 and create transaction with created new table name.
Provide the short description and select the radio button Tansaction with variant.
Here, you provide the transaction to be executed i.e. SM30 and provide variant name.
I think it will help you to solve your problem.
Thanks,
Phani Diwakar.

Similar Messages

Creating a query that provides a default transaction type for those transactions not categorized?

How could I create a query that provides a default transaction type for those transactions not categorized?
So assuming I have:
* Transactions table (with transactions)
* Categories table
* transactions_categories table - allows to allocate multiple categories (with a percentage)
- tranactionID
- categoryID
- percentageAllocation
* Usage is such that only non-personal categories have been applied through out data. So there is a lot of transactions with no categories applied
Aim:
* Want to create a query that creates a list of all the allocated amounts, so would include as columns: transaction.tDate, transaction.tTitle, categories.name, allocatedAmount(calculated from percentage * transaction amount)
BUT:
* How could I include in the query, the entries that cover all transaction that haven't been allocated, to a default category "personal", where the allocated Amount would be 100% of the transaction value
* And also (if it were possible), for transactions that have been categorized but not for the complete transaction value (say only 50% was allocated to a category), how to to cover this off to.

To default the value of the category:
select IIf(IsNull(Category),"Personal",Category) as Category,IIf(IsNull(Category),"100%",PercentageAllocation
) as PercentageAllocation from [yourtable]
What do you want to put the values of these ones:
And also (if it were possible), for transactions that have been categorized but not for the complete transaction
value (say only 50% was allocated to a category), how to to cover this off to.
Fouad Roumieh

Create a contact that will dial an external conference and enter a pin, using Lync

Greetings!
Let me describe a scenario.
On my cellphone, I can create a contact that will dial an external conference number that is not a Lync Meeting, insert a pause (with commas) enter a pin with a # at the end, because that particular conference system asks for pin followed by #.
The phone number for that contact on my phone is 18005551212,,,,1234#
Is there a way to do something similar to a Lync contact? or, as an Outlook contact that will pause and then enter the pin chars?
Well, thanks very much for reading my question!

Landis said no a while back:
http://social.technet.microsoft.com/Forums/lync/en-US/794fb7a5-f55e-4ca7-8f2e-d6264d7607f0/lync-conference-id-automatic-dialing?forum=ocsclients
And I don't believe that's changed. Effectively, the number you typed for the contact isn't what's sent. That gets normalized into what's sent. I think the only way to send pauses between DTMF is manually through the dialpad.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications

Transaction that will support BDT (Business Data Toolset)

Hi All,
Can anyone provide me the list of transaction that will support Business datatollset technologie(BDT).
Thanks.

Hi,
BDT starts probably from R/3 4.6C...
I believe you could have searched before posting this.
Refer to this Thread for all your Answers:
BDT - Business data tool set
http://www.sapdevelopment.co.uk/enhance/bdt/bdthome.htm

OK, I need to be able to have a linked TOC, and also have destinations created in FM10 that will not be lost when I 1. Save the book as a PDF. then 2. need the PDF to be as small as possible, but without losing my destinations. Anyone know how to do that

OK, I need to be able to have a linked TOC, and also have destinations created in FM10 that will not be lost when I 1. Save the book as a PDF; then 2. I need the PDF to be as small as possible, but without losing my destinations. Anyone know how to do that??
I had been saving as a PDF and then reducing the size of the PDF by printing it as a PDF with a degree of image compression. I write manuals with a LOT of screen captures and line art that needs to be clear. So it is a balancing act between image clarity and PDF size. The PDFs on the web need to be smaller - sure you can undertsand.
Anyway, when I print the PDF again, I lose both my destinations and bookmarks.
Anyone know of any way to avoid that?

Control the images by creating a custom PDF Job Options and then selecting it in the PDF Job Options drop-down of the PDF setup dialog box (File > Save as PDF...)
Create the custom PDF Job Options file with Distiller. If you do not have Distiller, open the Printing Preferences of the Adobe PDF printer. Start with the Smallest File Size Job Options settings and Edit.

How Do i create a list that will show in a dropdown box with the list being pulled from another tab and not the cell data format junk?

How Do i create a list that will show in a dropdown box with the list being pulled from another tab and not the cell data format junk?
I currently run OS X 10.10.1
Now i have been trying to work on this for a while now and what i want to do should be simple but its apparently not.
Here is an example of what i want to happen.
I will have 2 tabs: Contact | Sales
Now Contacts will have the list of names and various information about a customer, While Sales will have one drop-down box for each Cell Row that will show the names of the person in tab contacts
for what i am wanting to do i cant use the data format pop-up menu because the list is edited everyday several times a day.
Now how do i do this, Excel can do this so how can numbers do it?

Hi Shegra,
Paste this into a applescript editor window and run it from there. In the script you may need to adjust the four properties to agree with your spreadsheet. Let me know if you have any questions.
quinn
Script starts:
-- This script converts column A in one table into an alphabetized list of popups. It copies the last cell in that column. Then reverts the column to text. It then refreshes popups in column A of a data table starting with a user defined row.
property DataEntrySheet : "Sheet 1" --name of sheet with popups to be refreshed
property DataEntryTable : "Sales" --name of table with popups to be refreshed
set copyRange to {}
property PopValueSheet : "Sheet 1" --name of sheet with popup values table
property PopValueTable : "Contacts" --name of table with popup values
set PopStartRow to {}
tell application "Numbers"
set d to front document
set ps to d's sheet PopValueSheet
set pt to ps's table PopValueTable
set s to d's sheet DataEntrySheet
set t to s's table DataEntryTable
set tf to t's filtered --this records filter setting on data Entry Table
display dialog "Start from row #..." default answer "" with icon 1 -- with icon file "Path:to:my.icon.icns" --a Week # row
set PopStartRow to {text returned of result}
tell pt --convert list to alphabetized popups
set ptRows to count rows
set copyRange to ("A2:" & name of cell ptRows of column "A")
set selection range to range copyRange
set selection range's format to text
sort by column 1 direction ascending
set selection range's format to pop up menu
-- popupsmade
set selection range to cell ptRows of column 1 of pt
set v to value of cell ptRows of pt
end tell
activate application "Numbers"
tell application "System Events" to keystroke "c" using command down
tell pt
set selection range to range copyRange
set selection range's format to text
end tell
tell t
set filtered to false
set tRows to count rows
set pasteRange to ((name of cell PopStartRow of column "A") & ":" & (name of cell tRows of column "A"))
set selection range to range pasteRange
tell application "System Events" to keystroke "v" using command down
set filtered to tf
end tell
end tell

Having stopped audio with a swf inside a sidelet can someone create a swf that will resume the audio

Ok, rick is going to post the fla of this file and I will
post the swf. Basically this is all about having a slide that has
audio running all the way through and enabling the user to roll
over a sidelet and have the video and audio stop playback.
At present, the max you can achieve is, to stop video. The
audio keeps going and of course everything gets out of
sync. Rick has create a swf that you input into a sidelet (
after having imported your image or video ) which stops the audio.
Fantasitc. Unfortunatly he was not successful in creating a swf
that will resume the audio.
So there is the mission. To create something that will resume
the audio, be it a swf inside the sidelet or something else.

Hi there paul. Am I right in thinking that your code will
mute the audio. In my situation this would cause problems becasue
you would roll over the sidelet - the audio would go silent and
when you rolled off, or resumed the audio, it would have been
playing so again the video and audio will be out of sync.
Rick - rather than another swf which would activate the audio
and video when you roll off the sidelet ( while that is the perfect
solution ) what about looking at a button the user can press to
resume things, maybe Im wrong but that sounds a little easier.
( however for all those reading this that is not really the
solution I am looking for, what Im looking for is the above
solution where you can just roll off and on and so on )

Create a Procedure that will accept a variable

Hi,
I'm new to pl/sql and I'm trying to create a procedure that will accept a variable. I want to use this sql to create restore points that can store the name of each batch job as it runs.
The code works fine on it's own, but if I try to create the procedure it asks me for a value for 1, how do I stop it doing that?
CREATE OR REPLACE PROCEDURE create_restore_point AS
DECLARE
pointno number(5);
pointname varchar2(128) := upper('&1');
dbname v$database.name%TYPE;
scn_time date;
scn number;
BEGIN
SELECT restore_point_seq.nextval into pointno from dual;
SELECT name into dbname from v$database;
SELECT sysdate into scn_time from dual;
SELECT dbms_flashback.get_system_change_number into scn from dual;
INSERT into restore_point
values
(pointno,pointname,dbname,scn_time,scn);
commit;
END create_restore_point;
Many thanks in advance,
Tom.

It asks for value of 1 because you have &1 in your code. If you want to pass the value for pointname, then you can change your procedure like below.
CREATE OR REPLACE PROCEDURE create_restore_point (svar varchar2)AS
DECLARE
pointno number(5);
pointname varchar2(128) := upper(svar);
dbname v$database.name%TYPE;
scn_time date;
scn number;
BEGIN
SELECT restore_point_seq.nextval into pointno from dual;
SELECT name into dbname from v$database;
SELECT sysdate into scn_time from dual;
SELECT dbms_flashback.get_system_change_number into scn from dual;
INSERT into restore_point
values
(pointno,pointname,dbname,scn_time,scn);
commit;
END create_restore_point;

Create a window that will always ontop

pls am having a problem creating a window that will always on top such that it cannot be minimized that cannot go to the background ,will always be on top like the task manager in windows
help meeeeeeee!!!!!!
my email:[email protected]

http://forum.java.sun.com/thread.jsp?forum=57&thread=121761
Try searching the forums, this has been asked many times before.

Is it possible to create a bean that will generate (fill up) applet paramet

Hi all,
As a newbie I was asking myself is it possible to create a bean that will fill up applet parameter or directly generate the applet ??
And I can I create it ?
I mean : Having a jsp page that make reference to the bean, the bean shall generatehtml applet parameter values.
Some samples will be welcome or a template.
Thanks in advance
Shamann

Thanks a lot for your reply siv viv,
I've posted this thread because I'm a little bit disappointed with Applet and jsp according to lot of thread about this subject (it seems that communication between applet and jsp is not easy : bug reported).
The basic thing i want to do is to create a dynamic Pie Chart as applet or bean so i need to set applet parameter thanks to variables.
See the http://forums.java.sun.com/thread.jsp?forum=45&thread=80250 this one is putting me in the dark.
regards
Shamann

Firstly hello to all. I'm looking to create a vi that will take a single logged output from a thermocouple and monitor the temperature and produce a Boolean when the temperature has stabilised for a pre determined time say 1minuet.

Firstly hello to all. I’m looking to create a vi that will
take a single logged output from a thermocouple and monitor the temperature and
produce a Boolean when the temperature has stabilised for a pre determined time
say 1minuet. I have managed to find a couple of examples on the forum but one
will only run on V8.2 and I have V8, the other is for more than one channel
witch is fine I can always reduce this, but it was the timing feature I was
having difficulty with. I looking to monitor the temperature of a motor until
it has stabilised prior to testing and then to use this temperature as a
reference. Pleas forgive my ignorance if this is a very simple thing but I’ am
learning and really enjoying it. Thank you in advance for your answers.

Hi
Graham, thank you for you reply.
What I’ am trying to achieve is a vi I can use in a motor
testing setup, a part of this would be to warm the motor up until the exhaust
air temperature has stabilised, this takes approximately 10 minuets. I was
thinking of just letting the motor run for this time and leave it at this, but
some motors warm up quicker that others and. I am basically looking for a vi with
an adjustable temperature window of say ±5 C° in 1° increments, timing wise 1minuet
to 10min the adjustment is so I a can use this for another application. I tried
to adjust the code I found at the link below but had a little difficulty with
the timing. Thank you so much for your help it’s much appreciated.
sine.ni.com/niforum/niforum?forumDU=http://forums.ni.com/ni/board/message?board.id=170&message.id=251017&requireLogin=False

I need instructions on how to create a button that will email a pdf form to someone else on a websit

I NEED ASSISTANCE CREATING A BUTTON THAT WILL EMAIL A PDF FORM FROM A WEBSITE TO WHOEVER THE VIEWER WANTS TO

Just a bit more info. E-mail can be used, but has potential problems -- often related to the client machine that you have no control over. Use the data submissions (either FDF or XML) rather than the full PDF so you do not have to deal with Reader Rights and the related license issues. The FDF and XML data files are easily imported into the original form so that you see what the client sees. With those aspects in mind, just go ahead and try one. Be aware that you can add form fields using the form tools in the Advanced Editing tools, OR use the forms menu that will take you to Designer. You might want to try both to see the pros and cons. Be sure to keep such a test simple so you are not wasting time on your final form just for testing. I typically create a 1 page form that has all of the possible fields for such a test.

How to create a form that will allow the applicant to upload their photo

I have Adobe Acrobat 9 Pro Extended and I know how to create forms that require text input.
How to create a form that will allow the applicant to upload their photo? I alo wish to know how to upload a photograph so that I can test the form I created.
Thank you
Adrian Watts

test@ORA10G> with x as (
2    select '234-1111' as customer, to_date('2-Jan-2008','dd-Mon-yyyy') as call_date, 'Order product' as reason from dual union all
3    select '234-1132', to_date('3-Jan-2008','dd-Mon-yyyy'), 'Request info' from dual union all
4    select '231-1154', to_date('4-Sep-2007','dd-Mon-yyyy'), 'Request info' from dual union all
5    select '234-1111', to_date('2-Nov-2007','dd-Mon-yyyy'), 'Order product' from dual union all
6    select '234-1132', to_date('9-Jan-2008','dd-Mon-yyyy'), 'Request info' from dual union all
7    select '231-1154', to_date('9-Sep-2007','dd-Mon-yyyy'), 'Request info' from dual union all
8    select '234-1111', to_date('5-Dec-2007','dd-Mon-yyyy'), 'Order product' from dual union all
9    select '234-1131', to_date('7-Dec-2007','dd-Mon-yyyy'), 'Request info' from dual union all
10    select '231-1154', to_date('1-Sep-2007','dd-Mon-yyyy'), 'Request info' from dual union all
11    select '234-1111', to_date('8-Jan-2008','dd-Mon-yyyy'), 'Order product' from dual union all
12    select '234-1131', to_date('3-Dec-2007','dd-Mon-yyyy'), 'Request info' from dual union all
13    select '231-1154', to_date('4-Nov-2007','dd-Mon-yyyy'), 'Forward to Sales' from dual)
14 --
15 select customer,max(call_date), reason
16 from x
17 where reason = 'Request info'
18 group by customer, reason;
CUSTOMER MAX(CALL_ REASON
231-1154 09-SEP-07 Request info
234-1131 07-DEC-07 Request info
234-1132 09-JAN-08 Request info
test@ORA10G>
test@ORA10G>pratz

How to create a program that will accept a series of strings of 0 and 1 onl

how to create a program that will accept a series of strings of 0 and 1 only then displays 0 as 48 and displays 1 as 49.

Isn't one thread enough for your homework?
http://forum.java.sun.com/thread.jspa?threadID=5253850&messageID=10051155#10051155

How to create an action that will crop two sections from one scanned image?

I'm trying to create an action that will automate the process of cropping the left and right pages from a series of two-page book scans.
I tried to create a 2 step action which first crops the left half of a scan (by setting the left margin to 0in and the right margin to 6in) and then the right half of the scan (by setting the left margin to 6in and the right margin to. 12in), however when executing, only the left half appears to be cropped.
I imagine this is due to the fact that once one side of the initial scan is cropped, the other side disappears.
Is there any way around this?

Basically i need to create a new document out of a folder full of images.
You may have to look into Scripting to achieve something like this.
You could ask in the Scriptimg Forum
Photoshop Scripting
But maybe it would suffice to insert the Menu Item
File – Scripts – Load Files into Stack
into the Action and then iterate through the Layers with [ or ] and reset the opacities and Blend Modes – but as Actions would not be able to change the number of repetitions of the operation conditionally a custom Script would still seem preferable.

Create a transaction that will enter SM30 transaction

Similar Messages

Maybe you are looking for