Create Accounting could not be done after voiding some payment.

Hi,
I am facing a unique problem. We have some payments which have been accounted properly and transferred to GL. But for some business issue we have to cancel those payments. But when we have voided those payments and tried to create account it it showed message "App-SQLAP-10710: Online Accounting could not be created please submit payables accounting process istead to create accounting entries for this transaction." But when I ran the Payables Accounting Process the problem remains. Now we are facing problem because we are having Period Close Exceptions Report.
Please help me.
Rubayat Newaz Khan

Hi Rubayat;
I am facing a unique problem. We have some payments which have been accounted properly and transferred to GL. But for some business issue we have to cancel those payments. But when we have voided those payments and tried to create account it it showed message "App-SQLAP-10710: Online Accounting could not be created please submit payables accounting process istead to create accounting entries for this transaction." But when I ran the Payables Accounting Process the problem remains. Now we are facing problem because we are having Period Close Exceptions Report. What is your EBS version and OS?
Please follow below and see its helpful:
APACCENG APP-SQLAP-10710 Create Accounting does not process for Cancelled Invoice and for Voided Payment [ID 124469.1]
Accounting For Voided Payment Fails with APP-SQLAP-10710 [ID 229910.1]
Online Accounting Could Not Be Created For Standard Invoice [ID 401709.1]11.5 AP APXPAWKB:Cannot Run Create Accounting For A Reconciled Payment. [ID 233823.1]
APACCENG - Cannot Account For a Prepayment [ID 200693.1]
Regard
Helios

Similar Messages

APP-SQLAP-10710: Online Accounting could not be created

Hi,
The following error occurs when trying to run the "Create Accounting" procedure for an invoice:
"APP-SQLAP-10710: Online Accounting could not be created. Please submit the Payables Accounting Process instead to create accounting entries for this transaction"
Upon running the "Payables Accounting Process" the following error occurs :
"Spawned Process 25330 MSG-00002: Check that AX is not installed before calling the accounting engine MSG-00003: AX is not installed, Calling the accounting engine MSG-00004: After the call to AP_Accounting_Engine_Pkg.Do_Accounting MSG-00005: Error occured in the accounting process MSG-00006: Error Message: ORA-20100: File o0012833.tmp creation for FND_FILE failed. You will find more information on the cause of the error in request log. occurred in &CALLING_SEQUENCE with parameters (&PARAMETERS) while performing the following operation: &DEBUG_INFO REP-1419: 'beforereport': PL/SQL program aborted. Report Builder: Release 6.0.8.26.0 - Production on Thu Mar 9 15:02:33 2006 (c) Copyright 1999 Oracle Corporation. All rights reserved. Enter Username: Program exited with status 1 Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 2821167. Review your concurrent request log and/or report output file for more detailed information."
Any idea whats the problem and what can be done about this.
Regards,
Meenakshi

Hi,
The invoice is in functional / local currency.I queried the tables:
- ap_invoice_distributions_all and
- ap_accounting_events_all .
I can see that all distribution lines of our invoice have three event codes:
-Invoice
-Invoice Adjustment
-Invoice Cancellation
Only invoice distribution lines with Invoice Adjustment code have a status flag of accounted while the others have status of created.
I tried the following:
from Help-> Diagonistics -> DEBUG. I ran the request Payables Accounting Process and found that there are two line with line type as Invoice Price and Exception : Invalid Acct and their account column is empty.
I could not match the report with neither the application nor the tables as I could not find a row with same AMOUNT and same LINE TYPE : Invoice Price.
how can identify I the records with wrong account?
Please help...
Edited by: AHS on Nov 4, 2010 12:07 AM

ICloud mail account could not be enabled

Since I have updated to Mavericks I have been having difficulty with "Mail". I had 4 accounts; two of which were gmail accounts.
After reading about the gmail issues, I was hoping that the recent "Mail Update for Mavericks" would solve my issue. Unfortuantely my issues remain.
The problem first began with the program taking minutes (up to 10 min) to load; forcing me to force quit the program many times.
I slowly deleted the various accounts from my icloud account. Interestingly in the System Preferences under "internet accounts" it would initially not display all of the accounts that I had listed in the mail program. It would also take 10 min to load the accounts into the Accounts Pane on the "internet Account" dialog.
Even after deleting each of the accounts; including my icloud account and then only re-enabling my icloud account things didn't get better.
Now "mail" doesn't load at all. And I can't enable "mail" in the Icloud system preferences.
It times out after 3-5 minutes saying "Your iCloud mail account could not be enabled. Try enabling it again". Of course; trying again gets the same message.
So I'm stuck not using "Mail" at all; and I don't know what the issue is.
I've moved on to "AirMail" and it is working fine. But would like to use "Mail".
Any one else getting this???

I had this problem & found these instructions, it worked everything as it was before the upgrade now, except I've lost the old email accounts I deleted.
The problem was caused by dodgy entries in the accounts.plist file in my User Library folder. It appears that either when I upgraded to Mavericks this file gained many thousands of duplicate entries, or maybe these entries were in there before but previously the OSX/Mail combination was more tolerant. When I removed these the problem with Mail disappeared. Here’s what I did….
1> Make the user Library folder visible - in Mavericks this is a lot easier than Lion/Mountain Lion. Simply open up your user directory in Finder, select menu View>Show View Options, and select “Show Library Folder”
2> Navigate through username>Library>Mail>V2>MailData and select the Accounts.plist file. If this file is multiple megabytes (mine was 40+mb) then this is likely the cause of your problem (once sorted mine ended up at 19k in size!)
3> To be safe, make a copy of this file (I placed the copy on my desktop).
4> Using your chosen text editor (I used Text Wrangler but I’m sure TextEdit would work just fine) open the Accounts.plist in the MailData folder (not your backup copy) and take a look. If it’s the same as me you will find hundreds and hundreds of entries for the same mailbox repeated in there. Mine was an old MSN mailbox that I never use any more (I’ve seen in other forums that other Hotmail type accounts also seem to be the culprits in this context). There will likely be two lots of repeated data, one in the XML “DeliveryAccounts” <array> section, and one lot in the “MailAccounts” <array> section.
5> Delete (keeping in mind the need to select the XML sections correctly from <dict> to </dict> completely) all those extra entries that you found, keeping the mail accounts you do need, in the XML and save the file.
6> Mail should open up nice and fast again and not eat your system
7> If this did not work, and causes problems because of over eager deleting in <5> you can replace your broken Accounts.plist file with your backup and try again.

Error -Account 'Down-payments clearing account' could not be found for area

When I am trying to pass a down payment entry by debiting vedor and crediting bank with asset it is giving an error as follows.
Account 'Down-payments clearing account' could not be found for area 01
Message no. AU133
Please help me to rectify the same.
Thanks in advance
Deepak

HI
Please pay attention at the possible causes of message AU133:
1. Error AU133:
   a) You have not defined a contra account for acquisition value postings in the Asset Accounting Customizing settings (Transaction AO90).However, this is required as of Release 4.6C because, as is the case for all other integration postings in Asset Accounting, invoice receipt postings have to be displayed in Asset Accounting via the new posting kernel to ensure an identical document
structure.
   b) You have defined the account in Asset Accounting, however, it is not created in the affected company code.Check whether the account is correct and create it for the company code, if necessary.
2. You have entered an asset reconciliation account for the "Contra account: Acquisition value posting" (for example, the same account as for   "Acquisition:Acquis. and production costs" account).This is not permitted.Check whether your account determination is correct
   (Transaction AO90) in Asset Accounting Customizing. The same applies
   for the 'Contra account: Down payment posting'.
3. As "Contra account: Acquisition value posting" you entered an asset G/L account. If necessary change the automatic posting indicator in the G/L account master record.
4.Check if you need revaluation accounts in depreciation areas involved   (AO90):
-Revaluation acquis. and production costs
-Offsetting account: Revaluation APC
Please run also programm RACKONTO where missing or wrong customizing
the accoutn determinations per company code is displayed
Also have a look at note 7595 in this regard.
Please assign points if it useful.
Regards
Ravinagh Boni

I changed my name on MacBook pro, I could not log in after that though the password is unchanged but tHe name appeared on the login window is the original name?..how I can log in?

I changed my name on MacBook pro, I could not log in after that though the password is unchanged but tHe name appeared on the login window is the original name?..how I can log in?

Hmmm. Maybe try this?
OS X: Changing or resetting an account password

On apple tv you can sign in to mobileme account but it wont allow me to, it says mobileme account could not be found. please help??

on apple tv you can sign in to mobileme account but it wont allow me to, it says mobileme account could not be found. please help??

OK - I am trying to be rude either, just very frustrated.
I hope the OP is not put off and for her benefit I will post this.
If you are looking for galleries and have an otherwise functioning ATV2 read no further.
If you are trying to get your unit to work because:
1) You have selected to send feedback to Apple and then wanted to key in your mobile me address and failed, or
2) Tried to set the iTunes store by using your me address, because they are the same, or
3) You are trying to set up home sharing using your mobile me address
then as part of the set up process you will, having keyed in your .me address and password, have got the message that your mobile me account can not be found.
If you look under the general section, you have the option to set time zone. If this shows Cupertino and you have selected either "automatic time setting" or keyed in another town not on Pacific ST and you are not in Cupertino then date and time have not set.
You can unplug the unit and leave for a few minutes, you can select to reset and restore. You can check that your router allows access to the necessary ports (typically 53, 80, 123, 443, 3689 and UDP 5353).
If your Apple TV on reset and opening the ports, still hangs at "setting date and time," then you are one of a group of people being blocked access for some reason that is not being shared openly - other than my comment above about server issues at Apple's end. This is not malicious but just repeating information posted on this and other fora. I can not confirm or deny, but when every other option has been discounted then only certain solutions remain.
I wish you luck in getting your ATV to work as it should.
PS I don't think cables are an issue here as you obviously are seeing something on the screen to see that you can't log in.

I create trigger but not display massage after insert in oracle 10g

I create trigger but not display massage after insert in oracle 10g
**CREATE OR REPLACE TRIGGER TableName**
**AFTER INSERT OR DELETE OR UPDATE ON test**
**BEGIN**
**if inserting then**
**dbms_output.put('Message');**
**end if;**
**END;**

What user interface are you using?
If the tool doesn't support the SQL*Plus syntax (set serveroutput on), it probably has an option somewhere to enable DBMS Output. Not even knowing what tool you're using, it's impossible for us to guess where that option might be configured.
As others have suggested, using DBMS Output to test code is less than ideal because you're dependent on the application you're using to display it to you and not every application can or will do that. If you want to use DBMS_Output, you may need to switch to a different GUI (SQL Developer or SQL*Plus are both free utilities from Oracle). Otherwise, you'd probably be better off having the trigger do something that you can subsequently query (i.e. write a row to a log table).
Justin

Could not open itunes after latest update

Could not open Itunes after latest update. Any sloutions??

iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iTunes for Windows: iTunes can't contact the iPhone, iPad, or iPod software update server
http://support.apple.com/kb/ts1814
iTunes for Windows: Device Sync Tests
http://support.apple.com/kb/HT4235
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
http://support.apple.com/kb/ts4062
iOS: "Not enough free space" alert when trying to sync
http://support.apple.com/kb/ts1503
 Cheers, Tom

Continue to get error message "backup could not be completed" after purchasing additional storage

continue to get error message "backup could not be completed" after purchasing additional storage

Just wanted to update the community on my exciting adventure to fix my ipad;
I made my way over to the Apple Store here in South Florida and had my appointment with the geniuses. No one could figure this sucker out! They did every thing they could think of to the ipad without success. Couldn't even tell me what the problem was. All were very nice about it, of course. I was told to wait a day while they contacted the great and powerful central genius(es) but apparently no one was home there since they never responded to the request for help.
Anyway, I will go back to the Apple Store one more time before I give in to the conclusion that my 3 year old iPad (original) is DOA

PayPal account could not be verified

I'm trying to set up payment processings. When I put in my e-mail address and click Register account I get a message saying " The PayPal account could not be verified. I know it's the correct e-mail address and I have used it to collect payments on other sites. Any idea what the problem is?

Hi,
I checked our server log. It appears that at the time when you clicked the Register Account button, your FormsCentral sign-on cookie had been expired, therefore our server rejected the Register Account request.
Please log out from FormsCentral and log in again, then open your form and try to register your PayPal account again. Please let me know if this does not work to you.
Thanks,
Eman Fu
Senior Computer Scientist
Adobe Systems Incorporated

I got problem on installing iTunes. When I clicked iTunes out, two windows popped out. One said the procedure entry point CFAttributed String Create Mutable could not be located in the dynamic link library Core Foundation.dll.

I got problem on installing iTunes. When I clicked iTunes out, two windows popped out. One said the procedure entry point CFAttributed String Create Mutable could not be located in the dynamic link library Core Foundation.dll. and one just said *Itunes was not installed correctly. Please re install I Tunes Error 7 (windows error 127) . I've tried uninstalling and reinstalling it. But either way cant work. I really need some of your help! PLS HELP ME!

For general advice see Troubleshooting issues with iTunes for Windows updates.
The error shares a similar pattern to that in the third box, so a similar approach should work. Look for CoreFoundation.dll in C:\Program Files (x86)\Common Files\Apple\Apple Application Support, delete it, then repair Apple Application Support.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Unable to create mbean: Could not create provider JDBCDataSource

I copy ant code from http://middlewaremagic.com/weblogic/?p=2504 and change it as follow. In the first time of running ant, it works fine and I can see new datasource.
Then, I delete this datasource from weblogic console. I run the ant script again . But I get errors: BUILD FAILED
C:\JdevWorkspace\ANTdatasource\Project1\build.xml:30: Unable to create mbean: Could not create provider JDBCDataSource
I use weblogic 10.3.4
<?xml version="1.0" ?>
<project name="deploy" default="makeDataSource" basedir=".">
<property name="wls.username" value="weblogic" />
<property name="wls.password" value="welcome1" />
<property name="wls.url" value="t3://localhost:7001" />
<property name="wls.targetServer" value="AdminServer" />
<property name="wls.domainName" value="SOAdomain5" />

<property name="database.url" value="jdbc:oracle:thin:@localhost:1521:orcl"/>

<property name="database.driver" value="oracle.jdbc.xa.client.OracleXADataSource"/>
<property name="database.user" value="dstest" />
<property name="database.password" value="dstest" />
<property name="weblogic.jar" value="E:\Jdeveloper_11115\wlserver_10.3\server\lib" />
<echo message="${weblogic.jar}\weblogic.jar"/>
<taskdef name="wldeploy" classname="weblogic.ant.taskdefs.management.WLDeploy">
<classpath>
<pathelement location="${weblogic.jar}\weblogic.jar"/>
</classpath>
</taskdef>
<taskdef name="wlconfig" classname="weblogic.ant.taskdefs.management.WLConfig">
<classpath>
<pathelement location="${weblogic.jar}\weblogic.jar"/>
</classpath>
</taskdef>
<target name="makeDataSource">
<wlconfig username="${wls.username}" password="${wls.password}" url="${wls.url}">
<query domain="${wls.domainName}" type="Server" name="${wls.targetServer}" property="x" />
<create type="JDBCConnectionPool" name="TestDS">
<set attribute="CapacityIncrement" value="1"/>
<set attribute="DriverName" value="${database.driver}"/>
<set attribute="InitialCapacity" value="1"/>
<set attribute="MaxCapacity" value="10"/>
<set attribute="Password" value="${database.password}"/>
<set attribute="Properties" value="user=${database.user}"/>
<set attribute="RefreshMinutes" value="0"/>
<set attribute="ShrinkPeriodMinutes" value="15"/>
<set attribute="ShrinkingEnabled" value="true"/>
<set attribute="TestConnectionsOnRelease" value="false"/>
<set attribute="TestConnectionsOnReserve" value="true"/>
<set attribute="TestTableName" value="SYSTABLES"/>
<set attribute="URL" value="${database.url}"/>
<set attribute="Targets" value="${x}" />
</create>
<create type="JDBCDataSource" name="TestDS" >
<set attribute="JNDIName" value="jdbc/TestDS"/>
<set attribute="PoolName" value="TestDS"/>
<set attribute="Targets" value="${x}" />
</create>
</wlconfig>
</target>
</project>

Hi, i have tried with initialcapacity 0 ..this time build is successful but datasource is getting created without jndi name :(
Plz let me know if u have any solution for this
Plz check the below Script
<?xml version="1.0"?>

<project name="deploy" default="makeDataSource" basedir=".">
     <property name="weblogic.jar" location="C:/Oracle/Middleware/wlserver_10.3/server/lib/weblogic.jar"/>
     <property name="wls.username" value="weblogic" />
     <property name="wls.password" value="weblogic" />
     <property name="wls.url" value="t3://000.00.000.000:7001" />
     <property name="wls.targetServer" value="AdminServer" />
     
     <property name="wls.domainName" value="SOA" />
     
     <property name="database.url" value="jdbc:oracle:thin:@000.00.000.000:1601:DATA1" />
     <property name="database.driver" value="oracle.jdbc.xa.client.OracleXADataSource" />
     <property name="database.user" value="USER" />
     <property name="database.password" value="PASSWORD" />
     <taskdef name="wldeploy" classname="weblogic.ant.taskdefs.management.WLDeploy" classpath="${weblogic.jar}"/>
     <taskdef name="wlconfig" classname="weblogic.ant.taskdefs.management.WLConfig" classpath="${weblogic.jar}"/>
     
     <target name="makeDataSource" >
     <wlconfig username="${wls.username}" password="{wls.password}" url="{wls.url}">
     <query domain="${wls.domainName}" type="Server" name="${wls.targetServer}" property="x" />
     <create type="JDBCConnectionPool" name="TestCaseDS" >
          <set attribute="CapacityIncrement" value="1"/>
          <set attribute="DriverName" value="${database.driver}"/>
          <set attribute="InitialCapacity" value="0"/>
          <set attribute="MaxCapacity" value="50"/>
          <set attribute="StatementTimeout" value="600"/>
          <set attribute="Password" value="USER"/>
          <set attribute="Properties" value="user=PASSWORD"/>
          <set attribute="RefreshMinutes" value="0"/>
          <set attribute="ShrinkPeriodMinutes" value="15"/>
          <set attribute="ShrinkingEnabled" value="true"/>
          <set attribute="TestConnectionsOnRelease" value="false"/>
          <set attribute="TestConnectionsOnReserve" value="true"/>
          <set attribute="TestConnectionsOnCreate" value="true"/>
          <set attribute="TestTableName" value="SQL SELECT 1 FROM DUAL"/>
          <set attribute="URL" value="${database.url}"/>
          <set attribute="Targets" value="${x}" />
     </create>
     <create type="JDBCDataSource" name="TestCaseDS">
          <set attribute="JNDIName" value="jdbc/TestCaseDS"/>
          <set attribute="PoolName" value="TestCaseDS"/>
          <set attribute="Targets" value="${x}"/>
     </create>
</wlconfig>
</target>
</project>
Thanks in advance ,
Edited by: soa.dev on 10-Sep-2012 21:58

Hi, my iphone could not be activated after upgrade it from IOS4 to IOS6, it shows that is due to activation server is unavailable and no sim card in the iphone. Anyone can help me please?

Hi, my iphone could not be activated after upgrade it from IOS4 to IOS6, it shows that is due to activation server is unavailable and no sim card in the iphone. Anyone can help me please?

It is 99% hacked/jailbroken iPhone to use a different carrier than intended. You have to put the sim from the original carrier or ask them to unlock the iPhone. We as well as Apple cannot help you with this.

Error: Sorry! We could not complete the transaction using this payment method. Please contact support.

I am everytime getting the following error
Sorry! We could not complete the transaction using this payment method. Please contact support.
I have put my 2 credit card information with Microsoft. I tried calling 2 times the customer support but it was a pathetic response. In a single call I talked to 4 customer support officers and everybody passed on the call to the next without resolving the
problem, and without telling the next officer what is my issue!! they just passed on the phone call to avoid me!!
It is really frustrating that neither Microsoft is provide a good support (it was hard for them to understand my issue, in fact one of the support guy did not even know spelling of Azure.. he/she was saying it assure!!! and One of the guy told me that I
cannot use credit card outside US and Canada. then why you call yourself global???
So Microsoft you have a few things to do as your homework.
1. Your support is pathetic, frustrating and requires better people out there who know about your products, so train them first!
2. You got my 2 credit cards information which I see at subscriptions for Windows Azure, please remove both of them if you cannot provide a good support and subscription.
3. Learn from other cloud providers, AWS will otherwise kill your business.
Regards
Kajal
Kajal Sinha

Hi Kajal,
Sincerely apologize for this inconvenience, for billing & account issue, usually we need to contact the support team by creating a support ticket at
http://www.windowsazure.com/en-us/support/contact/. Or if that doesn't work because you don't have an active subscription you will need to contact general customer support to have them create
a support ticket for you
http://support.microsoft.com/gp/customer-service-phone-numbers?wa=wsignin1.0).
If above support channels don't work, at your convenient, could you please send an email to me: dxu at microsoft.com with kindly providing your:
Name
Email address
Phone number
We will provide help via emails. Thank you.
Best Regards,
Ming Xu
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

HT1918 hey am stranded its like a month now my account does not have the None in the payment type section i had put my visa info but not now i want to remove them please urgent help

hey am stranded its like a month now my account does not have the None in the payment type section i had put my visa info but not now i want to remove them please urgent help

iTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html

Create Accounting could not be done after voiding some payment.

Similar Messages

Maybe you are looking for