Create Activity from Account
Hi,
we are using CRM 5.0 PCUI.
The Activity Application works fine but the Tabpage Activities in Account Application (Event: ACC_ACTIVITIES, Toolbargroup: ACC_ACT01) not working correctly.
If we try to Create an Activity with the "Add Entry" button no org and no partner determination are populated the org data and the defined partner for the order document.
The same order document in the Activity Application work fine and determine the correct org data and the correct additional partners.
I hope anyone can give me a hint for this problem.
Thanks and regards
Christian
Hi Charu,
Did you fix this message, can you please share your solution, i have the same message appreaing.
Many thnaks
Raj.D
Similar Messages
-
Error in creating activity from Account application ( from activity tab)
Hi Experts,
We are getting this error when try to create Activity from Account application in PCUI. But the same thing is working fine in at GUI level & actions profile assigned to Activity transaction is also working fine at GUI level. But in PCUIit is throwing this below error.
Diagnosis
You have attempted to create a follow-up transaction for an incorrect transction 2000764. This is not possible. You can only create follow-up transactions for error-free transactions.
System Response
The follow-up transaction is not created.
Procedure
Correct the errors in the source transaction 2000764. The error messages resulting from processing the error can be read in the application log in the source transaction.
Pls suggest solution for this.
Thanks in Advance.
Regards,
Basavaraj PatilHi Experts,
We are getting this error when try to create Activity from Account application in PCUI. But the same thing is working fine in at GUI level & actions profile assigned to Activity transaction is also working fine at GUI level. But in PCUIit is throwing this below error.
Diagnosis
You have attempted to create a follow-up transaction for an incorrect transction 2000764. This is not possible. You can only create follow-up transactions for error-free transactions.
System Response
The follow-up transaction is not created.
Procedure
Correct the errors in the source transaction 2000764. The error messages resulting from processing the error can be read in the application log in the source transaction.
Pls suggest solution for this.
Thanks in Advance.
Regards,
Basavaraj Patil -
Error while creating activities from Account application (Activity tab page
Hi Experts,
We are using CRM 5.0 with PCUI ( EP 7.0 version). We are getting below error when try to create activities from Account application in PCUI ( from activity tab page):
Error : Activity contains error.
Diagnosis
This transaction has errors.
Procedure
To correct the errors, go to the maintenance interface of the transaction.
To navigate to there, use the link to the account application
Pls suggest how to proceed with this error & helpful solutions would be rewrded generously.
Regards,
Basavaraj PatilHi Experts,
We are getting this error when try to create Activity from Account application in PCUI. But the same thing is working fine in at GUI level & actions profile assigned to Activity transaction is also working fine at GUI level. But in PCUIit is throwing this below error.
Diagnosis
You have attempted to create a follow-up transaction for an incorrect transction 2000764. This is not possible. You can only create follow-up transactions for error-free transactions.
System Response
The follow-up transaction is not created.
Procedure
Correct the errors in the source transaction 2000764. The error messages resulting from processing the error can be read in the application log in the source transaction.
Pls suggest solution for this.
Thanks in Advance.
Regards,
Basavaraj Patil -
Create activity from external system
Hi
What is meant by creating activity from external system.
I need to work on an enhancement which deals with function module to create activity that can be called from external systems e.g. on demand.
I am not sure what does that exactly mean?
Any pointers would be helpful.
Thanks
AlkaHi guys,
Thanks for your answers... But is it possible to call transaction NOTIF_CREATE from an external system?
I have done something already so that those 3 fields will be automatically populated for a message sent from an external system.
I changed the screen and called FM BAPI_NOTIFICATION_CREATE(a remote enabled FM which is the one being used by transaction NOTIF_CREATE to create a message) inside FM BCOS_SEND_MSG.
I populated the category, subject and solution in the FM export parameters as well as the solution number in the sap data table. I put a destination also..
This FM calls another FM DNO_OW_CREATE_NOTIFICATION which is the one being used from the external system but do not cater the functionality to send the 3 fields that we need.
As you will notice, there are lots of standard objects that I've changed. =)
My problem now is that the system data sent is the same with the system data if you create the message using NOTIF_CREATE. Some system that were sent when a message is sent from an external system is missing but at least the sap system and client ID is sent. There is no external reference number also. But hopefullly, the users will accept it. Can't find any other solution to this.
Thanks,
Eric -
Create Activity from Activity WB allows without template
Able to create activity from activity workbench without template, and allows user to clear , delete the template value.
Implement these two BADI:
1. BADI: Campaign Determination
2. BADI: PAI Processing of Survey Data in Campaign Automation
Note: In the seconde BADI modify the method to add your transaction type.
IMG>Customer Relationship Management>Marketing>Marketing Planning anc Campaign Management>Campaign Automation-->Business AddIns
Let me know if you have any questions! -
How to avoid duplicate DN exception when creating Active Directory Account
I am using OIM 9.1.0.2 to provision Active Directory accounts.
I run into issues when the DN of the user to be created already exists and I would like to know if anyone has some logic I can use to generate a different DN for new user by adding a number or something like that to the DN
Here is an example.
User 1 exists already and their DN: cn=john smith, cn=users, dc=company,dc=org
New user joins the company and his name is also john smith and he has no middle name: so system attempts to create his account as cn=john smith, cn=users, dc=company,dc=org
how can I accomplish this by making the account say cn=john smith_1, cn=users, dc=company,dc=org855640 wrote:
I run into issues when the DN of the user to be created already exists and I would like to know if anyone has some logic I can use to generate a different DN for new user by adding a number or something like that to the DN
There are two different questions:
1. How to generate a sequence of candidates for the name attribute
2. How to check if a record with the given name candidate already exists in the Active Directory, and hence try the next candidate from the sequence.
The answer for the first part is usually defined by the policy existing in your organization, in the simplest case you can append sequential integer numbers to the end of the original name.
The answer for the second question is not so simple if you use are provisioning with MSAD connector.
There are two places you can put the check:
-- in the pre-populate adapter for the UD_ADUSER_COMMONNAME field
-- in the adpADCSCREATEUSER event handler, which is responsible for new AD user record creation.
Both cases need some coding, since you have to obtain the AD connection and search AD for matching records.
Pros & cons
Placing check code in the pre-populate adapter:
Pros:
the result is visible in the form, administrator can change the pre-calculated value if he wishes
Cons:
you need to have all access to connection parameters, and establish one extra connection
this is not the way OIM is supposed to work :-(
Placing check code in the AD user creation task:
Pros:
you have all access to connection parameters, and open a connection here anyway
Cons:
the result is not present in the form, so no way for manual interaction by administrator here
BTW: this problem is not only related to DN generation, some other AD attributes (e.g. sAMAccountName, mailNickName, userPrincipalName, mail) should be unique in the AD domain scope.
Edited by: madhatter on Sep 7, 2012 12:02 AM -
Creating Active Directory Accounts for vSphere 5.1 Services
To set up the management pieces of vSphere, I need to have an account or accounts created in Active Directory. I need to determine how many to create and what permissions they need.
In Single Sign on Server, I need to choose an account that vCenter server will use when it connects to SSO. I can use the default admin@system-domain. Or I can add an account that is configured in Active Directory. Or, I can also use an active directory group instead of an individual user. What is the best way to do this and if I use an AD account, what permissions does it need at the domain level and at the local level on the Single Sign on Server? (I'm using multisite mode, so I can't use local accounts)
In SQL Server, I need to choose an account to use for the SQL server service. Should this account be an active directory account or a local user account? If so, what permissions should be assigned to the account in Active Directory and what permissions should be assigned to it on the local machine? What AD group, if any should it be a part of? What local permissions does it need?
In vCenter Server, I need to choose an account to run the "vCenter Server Service" in. Is it best to use the default "system" account or to use an account from Active Directory, or a local account?
I'm trying to get a big picture of an AD account/group strategy to use that covers the main management pieces of vSphere - vCenter Server, Single Sign on, Inventory Service, Web Client Services.
For example, create one group called "vSphere Services", then create separate accounts for each management piece, and assign them specific permissions on specific systems. Or create separate groups for each management piece and assign permissions to the groups. Is it better to consolidate some of these user names or split them out? Any experiences / suggestions welcome. Thanks.Hello,
For general services I use a service specific account within AD. This was before SSO and I use the same after SSO. SSO is used by only two services that I know about at the moment (Inventory Service and perhaps vCloud). However, there are many other service accounts that should be created. You want one account per service and I use AD for this, this way I can create a service account group and give it the appropriate roles and privileges. FOr example I have service accounts for:
VMware View
XenDesktop
vCops
HPSIM
Solarwinds
VMTurbo
NetApp
etc.
One service, one service account, each with either a general role or custom role depending on access requirements to vCenter.
For SSO, I to am waiting on general information, but I set mine up fairly basically to cover only those resources that make use of SSO. Since the vast majority of items do not use SSO, the rule still applies. Once SSO is supported by more than one or two tools, you still need to maintain that separation.
So I say yes, tie SSO to AD and do everything in one place, unfortunately, that is not very clear, or at least was not to me and these SSO issues are either beng fixed, documented, or both.
Best regards,
Edward L. Haletky aka Texiwill -
Create Activity from a Lead on PCUI
Hi everybody,
I am having a problem, I don't know if anybody has had this before. I am trying to create an Activity from the lead screen on PCUI by using the Standard create activity button, but when I click on it instead of trying to open a popup accessing the portal and one of the roles in it, it tries to open a popup calling the CRM WAS but it sends the portal role and i-view information. Of course with this instead of getting the activity I-view open I am getting a BSP Error from the PCUI BSP application.
I am not sure why is this happening I am using the standard i-views.
The exact error I am getting is as follows:
Business Server Page (BSP) Error
What happened?
Call of BSP page terminated due to error.
Note
Following error text processed in system:
BSP Exception: the Application Name com.sap.pct.crm.LeadManager in URL /roles/com.sap.pct.crm.LeadManager/ActivityManagement/MaintainActivities_2?DynamicParameter=CRM_OBJECT_TYPE%3DBUSINESSACTIVITYCRM%26CRM_BOR_TYPE%3DBUS2000126%26CRM_LOGSYS%3DCRDCLNT110%26CRM_NAV_EVENT%3DCREATE_FOLLOWUP%26sap-syscmd%3Dnocookie%26crm_psid_gu is invalid.
Error Type:
Your SAP Business Server Pages Team
Thanks a lot for any help you can give me on this.
Regards,
FelipeThe CRM Context Service is already installed, but I don't know if maybe something on it was not installed right and I don't know how I could check it.
Regards,
Felipe -
Create activity from survey reponse
Hi Experts,
I'm trying to implement a scenario in campaign automation (CRM2007) where an activity is created when in a survey response a particular questions is answered with a specific answer (for example, when question X has answer Y, an activity (task) should be created so that customer service can pick this up).
In the scenario outgoing mail as the response are generated in CRM. But how will i go about the creation of the additional tasks? After the decision node (when question X has answer Y --> campaign element Z) i put campaign element Z with communication medium Activity with an Activity Template associated to it. The workflow puts the business partner in the campaign element (number responses is + 1) but a activity is not created.
Your help will be very much appreciated!
Regards,
MariusImplement these two BADI:
1. BADI: Campaign Determination
2. BADI: PAI Processing of Survey Data in Campaign Automation
Note: In the seconde BADI modify the method to add your transaction type.
IMG>Customer Relationship Management>Marketing>Marketing Planning anc Campaign Management>Campaign Automation-->Business AddIns
Let me know if you have any questions! -
Prospect Determination when creating Lead from Account
Hello,
lately we have applied SP9 to our CRM 6.0.
Since then we have an error during the following process:
Search and find a Sold-To Party
From the "Lead" assignment block, click on create
The lead is opened in creation mode but the field "Prospect" is not filled and we receive
=> error message : "Enter Sales Prospect"
I have check in CRM 6.0 SP4 and SP5 and it it working fine.
Besides, we do not have this prospect determination problem when creating an opportunity with the same Partner Determination Procedure.
Would you have any idea?
Thank you in advance and regards,
DidierThanks but it is not the problem. The same PDP works fine with an opportunity.
kind rgds,
Didier -
Powershell Active Directory Account Expiration Script
I am putting together a script that creates a user account in AD, sets the password, adds groups, etc. The part I am having problems with is when the user selects the Contractor employee option and is prompted for the expiration date of the AD account.
The script will create the account, but the expiration date is not set in AD. Any suggestions?
Here's the code:
#Script to create Active Directory account
#Add the Active Directory Module if not already present
if (-not (Get-Module ActiveDirectory))
Import-Module ActiveDirectory -Force
Write-Host ""
Write-Host "======================================================" -ForegroundColor DarkYellow
Write-Host ""
Write-Host "Computer Access"
Write-Host "Create Active Directory User Script"
Write-Host "PowerShell 3.0"
Write-Host "Version: 1.2"
Write-Host "Date: 4/14/2014"
Write-Host "Author: "
Write-Host ""
Write-Host "Please review the created Active Directory Account" -ForegroundColor Red -BackgroundColor Yellow
Write-Host ""
Write-Host "Base Business Unit Group Memberships are added only" -ForegroundColor Red -BackgroundColor Yellow
Write-Host ""
Write-Host "======================================================" -ForegroundColor DarkYellow
Write-Host ""
Write-Host ""
Write-Host "======================================================" -ForegroundColor DarkYellow
Write-Host "Creating Active Directory Account" -ForegroundColor Yellow
Write-Host "======================================================" -ForegroundColor DarkYellow
Write-Host ""
#Specify the target OU for new users
$targetOU = "OU=Personnel,OU=ETA,DC=eta,DC=state,DC=tx"
#Find the current domain info
$domdns = (Get-ADDomain).dnsroot # for UPN generation
#Set Account Variables
#Set Username with Dialogue Box
[void] [System.Reflection.Assembly]::LoadWithPartialName("System.Drawing")
[void] [System.Reflection.Assembly]::LoadWithPartialName("System.Windows.Forms")
$objForm = New-Object System.Windows.Forms.Form
$objForm.Font = New-Object System.Drawing.Font("Arial",10)
$objForm.Text = "Username"
$objForm.Size = New-Object System.Drawing.Size(300,200)
$objForm.StartPosition = "CenterScreen"
$objForm.KeyPreview = $True
$objForm.Add_KeyDown({if ($_.KeyCode -eq "Enter")
{$global:setusername=$objTextBox.Text;$objForm.Close()}})
$objForm.Add_KeyDown({if ($_.KeyCode -eq "Escape")
{$objForm.Close()}})
$OKButton = New-Object System.Windows.Forms.Button
$OKButton.Location = New-Object System.Drawing.Size(75,120)
$OKButton.Size = New-Object System.Drawing.Size(75,23)
$OKButton.Text = "OK"
$OKButton.Add_Click({$global:setusername=$objTextBox.Text;$objForm.Close()})
$objForm.Controls.Add($OKButton)
$CancelButton = New-Object System.Windows.Forms.Button
$CancelButton.Location = New-Object System.Drawing.Size(150,120)
$CancelButton.Size = New-Object System.Drawing.Size(75,23)
$CancelButton.Text = "Cancel"
$CancelButton.Add_Click(
{$Looping=$False
$objForm.Close()
[environment]::Exit(0)
$objForm.Controls.Add($CancelButton)
$objLabel = New-Object System.Windows.Forms.Label
$objLabel.Location = New-Object System.Drawing.Size(10,20)
$objLabel.Size = New-Object System.Drawing.Size(280,20)
$objLabel.Text = "Please enter the username for the account:"
$objForm.Controls.Add($objLabel)
$objTextBox = New-Object System.Windows.Forms.TextBox
$objTextBox.Location = New-Object System.Drawing.Size(10,40)
$objTextBox.Size = New-Object System.Drawing.Size(260,20)
$objForm.Controls.Add($objTextBox)
$objForm.Topmost = $True
$objForm.Add_Shown({$objForm.Activate(); $objTextBox.focus()})
[void] $objForm.ShowDialog()
#If OK then set variable and continue
$samname = ($setusername | Out-String)
$samname = ($setusername) + ("")
function validateUser
param(
[string]$username
#if the username is passed without domain\
if(($username.StartsWith("domain\")) -eq $false)
$user = Get-ADUser -Filter { SamAccountName -eq $username }
if (!$user)
return $false
else
return $true
elseif(($username.StartsWith("domain\")) -eq $true)
$username = ($username.Split("\")[1])
$user = Get-ADUser -Filter { SamAccountName -eq $username }
if (!$user)
return $false
else
return $true
$usercheck = validateUser -username $samname
if($userCheck -eq $true) {
[System.Reflection.Assembly]::LoadWithPartialName("System.Windows.Forms")
[Windows.Forms.MessageBox]::Show("Username already exists in AD please check and retry",`
"Username Check", [Windows.Forms.MessageBoxButtons]::OK, [Windows.Forms.MessageBoxIcon]::Stop)
[environment]::Exit(0)
else {} #Continue
Write-Host ""
Write-Host "USERNAME has been set to" $samname -ForegroundColor Yellow
#Set User Accounts First Name
[void] [System.Reflection.Assembly]::LoadWithPartialName("System.Drawing")
[void] [System.Reflection.Assembly]::LoadWithPartialName("System.Windows.Forms")
$objForm = New-Object System.Windows.Forms.Form
$objForm.Font = New-Object System.Drawing.Font("Arial",10)
$objForm.Text = "First Name"
$objForm.Size = New-Object System.Drawing.Size(300,200)
$objForm.StartPosition = "CenterScreen"
$objForm.KeyPreview = $True
$objForm.Add_KeyDown({if ($_.KeyCode -eq "Enter")
{$global:setfirstname=$objTextBox.Text;$objForm.Close()}})
$objForm.Add_KeyDown({if ($_.KeyCode -eq "Escape")
{$objForm.Close()}})
$OKButton = New-Object System.Windows.Forms.Button
$OKButton.Location = New-Object System.Drawing.Size(75,120)
$OKButton.Size = New-Object System.Drawing.Size(75,23)
$OKButton.Text = "OK"
$OKButton.Add_Click({$global:setfirstname=$objTextBox.Text;$objForm.Close()})
$objForm.Controls.Add($OKButton)
$CancelButton = New-Object System.Windows.Forms.Button
$CancelButton.Location = New-Object System.Drawing.Size(150,120)
$CancelButton.Size = New-Object System.Drawing.Size(75,23)
$CancelButton.Text = "Cancel"
$CancelButton.Add_Click(
{$Looping=$False
$objForm.Close()
[environment]::Exit(0)
$objForm.Controls.Add($CancelButton)
$objLabel = New-Object System.Windows.Forms.Label
$objLabel.Location = New-Object System.Drawing.Size(10,20)
$objLabel.Size = New-Object System.Drawing.Size(280,20)
$objLabel.Text = "Please enter the users first name:"
$objForm.Controls.Add($objLabel)
$objTextBox = New-Object System.Windows.Forms.TextBox
$objTextBox.Location = New-Object System.Drawing.Size(10,40)
$objTextBox.Size = New-Object System.Drawing.Size(260,20)
$objForm.Controls.Add($objTextBox)
$objForm.Topmost = $True
$objForm.Add_Shown({$objForm.Activate(); $objTextBox.focus()})
[void] $objForm.ShowDialog()
#If OK then set variable and continue
$givname = ($setfirstname | Out-String)
$givname = ("$setfirstname") + ("")
Write-Host ""
Write-Host "FIRST NAME has been set to" $givname -ForegroundColor Yellow
#Set User Accounts Last Name
[void] [System.Reflection.Assembly]::LoadWithPartialName("System.Drawing")
[void] [System.Reflection.Assembly]::LoadWithPartialName("System.Windows.Forms")
$objForm = New-Object System.Windows.Forms.Form
$objForm.Font = New-Object System.Drawing.Font("Arial",10)
$objForm.Text = "Last Name"
$objForm.Size = New-Object System.Drawing.Size(300,200)
$objForm.StartPosition = "CenterScreen"
$objForm.KeyPreview = $True
$objForm.Add_KeyDown({if ($_.KeyCode -eq "Enter")
{$global:setlastname=$objTextBox.Text;$objForm.Close()}})
$objForm.Add_KeyDown({if ($_.KeyCode -eq "Escape")
{$objForm.Close()}})
$OKButton = New-Object System.Windows.Forms.Button
$OKButton.Location = New-Object System.Drawing.Size(75,120)
$OKButton.Size = New-Object System.Drawing.Size(75,23)
$OKButton.Text = "OK"
$OKButton.Add_Click({$global:setlastname=$objTextBox.Text;$objForm.Close()})
$objForm.Controls.Add($OKButton)
$CancelButton = New-Object System.Windows.Forms.Button
$CancelButton.Location = New-Object System.Drawing.Size(150,120)
$CancelButton.Size = New-Object System.Drawing.Size(75,23)
$CancelButton.Text = "Cancel"
$CancelButton.Add_Click(
{$Looping=$False
$objForm.Close()
[environment]::Exit(0)
$objForm.Controls.Add($CancelButton)
$objLabel = New-Object System.Windows.Forms.Label
$objLabel.Location = New-Object System.Drawing.Size(10,20)
$objLabel.Size = New-Object System.Drawing.Size(280,20)
$objLabel.Text = "Please enter the users last name:"
$objForm.Controls.Add($objLabel)
$objTextBox = New-Object System.Windows.Forms.TextBox
$objTextBox.Location = New-Object System.Drawing.Size(10,40)
$objTextBox.Size = New-Object System.Drawing.Size(260,20)
$objForm.Controls.Add($objTextBox)
$objForm.Topmost = $True
$objForm.Add_Shown({$objForm.Activate(); $objTextBox.focus()})
[void] $objForm.ShowDialog()
#If OK then set variable and continue
$surname = ($setlastname | Out-String)
$surname = ("$setlastname") + ("")
Write-Host ""
Write-Host "LAST NAME has been set to" $surname -ForegroundColor Yellow
#Set the Department Number for the Active Directory Account
[void] [System.Reflection.Assembly]::LoadWithPartialName("System.Drawing")
[void] [System.Reflection.Assembly]::LoadWithPartialName("System.Windows.Forms")
$objForm = New-Object System.Windows.Forms.Form
$objForm.Font = New-Object System.Drawing.Font("Arial",10)
$objForm.Text = "Cost Center"
$objForm.Size = New-Object System.Drawing.Size(300,200)
$objForm.StartPosition = "CenterScreen"
$objForm.KeyPreview = $True
$objForm.Add_KeyDown({if ($_.KeyCode -eq "Enter")
{$global:setcostcode=$objTextBox.Text;$objForm.Close()}})
$objForm.Add_KeyDown({if ($_.KeyCode -eq "Escape")
{$objForm.Close()}})
$OKButton = New-Object System.Windows.Forms.Button
$OKButton.Location = New-Object System.Drawing.Size(75,120)
$OKButton.Size = New-Object System.Drawing.Size(75,23)
$OKButton.Text = "OK"
$OKButton.Add_Click({$global:setcostcode=$objTextBox.Text;$objForm.Close()})
$objForm.Controls.Add($OKButton)
$CancelButton = New-Object System.Windows.Forms.Button
$CancelButton.Location = New-Object System.Drawing.Size(150,120)
$CancelButton.Size = New-Object System.Drawing.Size(75,23)
$CancelButton.Text = "Cancel"
$CancelButton.Add_Click(
{$Looping=$False
$objForm.Close()
[environment]::Exit(0)
$objForm.Controls.Add($CancelButton)
$objLabel = New-Object System.Windows.Forms.Label
$objLabel.Location = New-Object System.Drawing.Size(10,20)
$objLabel.Size = New-Object System.Drawing.Size(280,20)
$objLabel.Text = "Please enter the cost center for the account:"
$objForm.Controls.Add($objLabel)
$objTextBox = New-Object System.Windows.Forms.TextBox
$objTextBox.Location = New-Object System.Drawing.Size(10,40)
$objTextBox.Size = New-Object System.Drawing.Size(260,20)
$objForm.Controls.Add($objTextBox)
$objForm.Topmost = $True
$objForm.Add_Shown({$objForm.Activate(); $objTextBox.focus()})
[void] $objForm.ShowDialog()
#If OK then set variable and continue
$costcode = ($setcostcode | Out-String)
$costcode = ("$setcostcode") + ("")
Write-Host ""
Write-Host "COSTCODE has been set to" $costcode -ForegroundColor Yellow
#This creates a checkbox called Employee
$objTypeCheckbox = New-Object System.Windows.Forms.Checkbox
$objTypeCheckbox.Location = New-Object System.Drawing.Size(10,220)
$objTypeCheckbox.Size = New-Object System.Drawing.Size(500,20)
$objTypeCheckbox.Text = "Employee"
$objTypeCheckbox.TabIndex = 4
$objForm.Controls.Add($objTypeCheckbox)
#This creates a checkbox called Citrix User
$objCitrixUserCheckbox = New-Object System.Windows.Forms.Checkbox
$objCitrixUserCheckbox.Location = New-Object System.Drawing.Size(10,240)
$objCitrixUserCheckbox.Size = New-Object System.Drawing.Size(500,20)
$objCitrixUserCheckbox.Text = "Citrix User"
$objCitrixUserCheckbox.TabIndex = 5
$objForm.Controls.Add($objCitrixUserCheckbox)
#Set Permanent or Contractor (Expiration Date)
[void][reflection.assembly]::Load("System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089")
[void][reflection.assembly]::Load("System.Drawing, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a")
[System.Windows.Forms.Application]::EnableVisualStyles()
$form1 = New-Object 'System.Windows.Forms.Form'
$datetimepicker1 = New-Object 'System.Windows.Forms.DateTimePicker'
$radiobuttonPermanent = New-Object 'System.Windows.Forms.RadioButton'
$radiobuttonContractor = New-Object 'System.Windows.Forms.RadioButton'
$buttonOK = New-Object 'System.Windows.Forms.Button'
$InitialFormWindowState = New-Object 'System.Windows.Forms.FormWindowState'
$radiobuttonContractor_CheckedChanged={
if($radiobuttonContractor.Checked){
$datetimepicker1.Visible=$true
}else{
$datetimepicker1.Visible=$false
$Form_StateCorrection_Load=
#Correct the initial state of the form to prevent the .Net maximized form issue
$form1.WindowState = $InitialFormWindowState
$Form_Cleanup_FormClosed=
#Remove all event handlers from the controls
try
$radiobuttonContractor.remove_CheckedChanged($radiobuttonContractor_CheckedChanged)
$form1.remove_Load($FormEvent_Load)
$form1.remove_Load($Form_StateCorrection_Load)
$form1.remove_FormClosed($Form_Cleanup_FormClosed)
catch [Exception]
$form1.Controls.Add($datetimepicker1)
$form1.Controls.Add($radiobuttonPermanent)
$form1.Controls.Add($radiobuttonContractor)
$form1.Controls.Add($buttonOK)
$form1.AcceptButton = $buttonOK
$form1.ClientSize = '508, 262'
$form1.FormBorderStyle = 'FixedDialog'
$form1.MaximizeBox = $False
$form1.MinimizeBox = $False
$form1.Name = "form1"
$form1.StartPosition = 'CenterScreen'
$form1.Text = "Form"
$form1.add_Load($FormEvent_Load)
# datetimepicker1
$datetimepicker1.Location = '160, 91'
$datetimepicker1.Name = "datetimepicker1"
$datetimepicker1.Size = '200, 20'
$datetimepicker1.TabIndex = 3
$datetimepicker1.Visible = $False
# radiobuttonPermanent
$radiobuttonPermanent.Location = '33, 57'
$radiobuttonPermanent.Name = "radiobuttonPermanent"
$radiobuttonPermanent.Size = '104, 24'
$radiobuttonPermanent.TabIndex = 2
$radiobuttonPermanent.TabStop = $True
$radiobuttonPermanent.Text = "Permanent"
$radiobuttonPermanent.UseVisualStyleBackColor = $True
# radiobuttonContractor
$radiobuttonContractor.Location = '33, 87'
$radiobuttonContractor.Name = "radiobuttonContractor"
$radiobuttonContractor.Size = '104, 24'
$radiobuttonContractor.TabIndex = 1
$radiobuttonContractor.TabStop = $True
$radiobuttonContractor.Text = "Contractor"
$radiobuttonContractor.UseVisualStyleBackColor = $True
$radiobuttonContractor.add_CheckedChanged($radiobuttonContractor_CheckedChanged)
# buttonOK
$buttonOK.Anchor = 'Bottom, Right'
$buttonOK.DialogResult = 'OK'
$buttonOK.Location = '421, 227'
$buttonOK.Name = "buttonOK"
$buttonOK.Size = '75, 23'
$buttonOK.TabIndex = 0
$buttonOK.Text = "OK"
$buttonOK.UseVisualStyleBackColor = $True
#endregion Generated Form Code
#Save the initial state of the form
$InitialFormWindowState = $form1.WindowState
#Init the OnLoad event to correct the initial state of the form
$form1.add_Load($Form_StateCorrection_Load)
#Clean up the control events
$form1.add_FormClosed($Form_Cleanup_FormClosed)
#Show the Form
$form1.ShowDialog()
#Set the password for the new user account
#Change P@$$w0rd to whatever you want the account password to be
[void] [System.Reflection.Assembly]::LoadWithPartialName("System.Drawing")
[void] [System.Reflection.Assembly]::LoadWithPartialName("System.Windows.Forms")
$objForm = New-Object System.Windows.Forms.Form
$objForm.Font = New-Object System.Drawing.Font("Arial",10)
$objForm.Text = "Password"
$objForm.Size = New-Object System.Drawing.Size(300,200)
$objForm.StartPosition = "CenterScreen"
$objForm.KeyPreview = $True
$objForm.Add_KeyDown({if ($_.KeyCode -eq "Enter")
{$global:setpassword=$objTextBox.Text;$objForm.Close()}})
$objForm.Add_KeyDown({if ($_.KeyCode -eq "Escape")
{$objForm.Close()}})
$OKButton = New-Object System.Windows.Forms.Button
$OKButton.Location = New-Object System.Drawing.Size(75,120)
$OKButton.Size = New-Object System.Drawing.Size(75,23)
$OKButton.Text = "OK"
$OKButton.Add_Click({$global:setpassword=$objTextBox.Text;$objForm.Close()})
$objForm.Controls.Add($OKButton)
$CancelButton = New-Object System.Windows.Forms.Button
$CancelButton.Location = New-Object System.Drawing.Size(150,120)
$CancelButton.Size = New-Object System.Drawing.Size(75,23)
$CancelButton.Text = "Cancel"
$CancelButton.Add_Click(
{$Looping=$False
$objForm.Close()
[environment]::Exit(0)
$objForm.Controls.Add($CancelButton)
$objLabel = New-Object System.Windows.Forms.Label
$objLabel.Location = New-Object System.Drawing.Size(10,20)
$objLabel.Size = New-Object System.Drawing.Size(280,40)
$objLabel.Text = "Please enter the password you wish to set. Press Enter for P@SSw0rd:"
$objForm.Controls.Add($objLabel)
$objTextBox = New-Object System.Windows.Forms.TextBox
$objTextBox.Location = New-Object System.Drawing.Size(10,60)
$objTextBox.Size = New-Object System.Drawing.Size(260,20)
$objForm.Controls.Add($objTextBox)
$objForm.Topmost = $True
$objForm.Add_Shown({$objForm.Activate(); $objTextBox.focus()})
[void] $objForm.ShowDialog()
#If OK then set password and continue
$userpassword = ($setpassword | Out-String)
$userpassword = ("$setpassword") + ("")
if ($userpassword -eq "") {$userpassword = 'P@SSw0rd'}
$password = (ConvertTo-SecureString $userpassword -AsPlainText -Force)
#Set Variables for New-ADUser cmdlet
$dplname = "$surname, $givname"
$upname = "$givname.$surname" + "@" + "$domdns"
$email = "$givname" + "." + "$surname" + "@eta.state.tx.us"
$office = "WBT"
$description = "$costcode"
$description2 = "611IS - Permanent"
$description3 = "611PM - Permanent"
$description4 = "501 - Permanent"
##$loginscript = "yourloginscriptname"
$servername = "teafs2"
$homedir = "\\$($servername)\User\$($samname)"
$homedirpath = "\\$($servername)\User\$($samname)"
$Company= "ETA"
$department = "yourdepartment"
$department4 = "School Finance"
$departmentnumber = "" + "-" + "$costcode"
Write-Host ""
Write-Host "HOME SERVER is" $servername -ForegroundColor Yellow
Write-Host ""
Write-Host "HOME DIRECTORY has been set to" $homedir -ForegroundColor Yellow
Write-Host ""
Write-Host "DEPARTMENT has been set to" $department -ForegroundColor Yellow
Write-Host ""
Write-Host "DESCRIPTION has been set to" $departmentnumber -ForegroundColor Yellow
Write-Host ""
#Create Active Directory Account
New-ADUser -Name $dplname -SamAccountName $samname -DisplayName $dplname `
-givenname $givname -surname $surname -userprincipalname $upname -emailaddress $email `
-Path $targetou -Enabled $true -ChangePasswordAtLogon $true -Department $department `
-OtherAttributes @{'departmentNumber'="$departmentnumber"} -Company $Company -HomeDrive "H" -HomeDirectory $homedir `
-Description $description -Office $office -ScriptPath $loginscript -AccountPassword $password `
#Add User to Active Directory Groups Based on Description Field
If ((Get-ADUser $samname -Properties description).description -eq $description2) {
Add-ADGroupMember -Identity "CN=InformationSystemsPrintGroup,CN=Groups,OU=ETA,DC=tea,DC=state,DC=tx" -Member $samname
Add-ADGroupMember -Identity "CN=InformationSystemsOUDataGroup,CN=Groups,OU=ETA,DC=tea,DC=state,DC=tx" -Member $samname
Add-ADGroupMember -Identity "CN=InformationSystemsNetworkAccess,CN=Groups,OU=ETA,DC=tea,DC=state,DC=tx" -Member $samname
Add-ADGroupMember -Identity "CN=Mail users,OU=Groups,DC=tea,DC=state,DC=tx" -Member $samname
If ((Get-ADUser $samname -Properties description).description -eq $description3) {
Add-ADGroupMember -Identity "CN=ProjectMgmtNetworkAccess,CN=Groups,OU=ETA,DC=tea,DC=state,DC=tx" -Member $samname
Add-ADGroupMember -Identity "CN=ProjectMgmtOUDataGroup,CN=Groups,OU=ETA,DC=tea,DC=state,DC=tx" -Member $samname
Add-ADGroupMember -Identity "CN=ProjectMgmtPrintGroup,CN=Groups,OU=ETA,DC=tea,DC=state,DC=tx" -Member $samname
Add-ADGroupMember -Identity "CN=Cognos ETASE Dev-Test-Prod,OU=Groups,DC=tea,DC=state,DC=tx" -Member $samname
Add-ADGroupMember -Identity "CN=PMO ALL,OU=Distribution Groups,OU=Mailbox accounts,DC=tea,DC=state,DC=tx" -Member $samname
Add-ADGroupMember -Identity "CN=PMO Permanent,OU=Distribution Groups,OU=Mailbox accounts,DC=tea,DC=state,DC=tx" -Member $samname
Add-ADGroupMember -Identity "CN=Mail users,OU=Groups,DC=tea,DC=state,DC=tx" -Member $samname
If ((Get-ADUser $samname -Properties description).description -eq $description4) {
Add-ADGroupMember -Identity "CN=SchoolFinancePrintGroup,CN=Groups,OU=ETA,DC=tea,DC=state,DC=tx" -Member $samname
Add-ADGroupMember -Identity "CN=SchoolFinanceOUDataGroup,CN=Groups,OU=ETA,DC=tea,DC=state,DC=tx" -Member $samname
Add-ADGroupMember -Identity "CN=SchoolFinanceNetworkAccess,CN=Groups,OU=ETA,DC=tea,DC=state,DC=tx" -Member $samname
Add-ADGroupMember -Identity "CN=Mail users,OU=Groups,DC=tea,DC=state,DC=tx" -Member $samname
#Does the user require a mailbox?
$mailbox = New-Object -ComObject wscript.shell
$intAnswer = $mailbox.popup("Does this user require a mailbox?", `
0,"Create Mailbox",32+4)
If ($intAnswer -eq 6) {
Add-ADGroupMember -Identity "YourADGroupName5" -Member $samname
$mailbox.popup("User added to EMail Provisioning Group", `
0,"Created",64+0)
} else {
$mailbox.popup("User has not been added to the EMail Provisioning Group", `
0,"Not Created",64+0)
#Does the user require a LYNC Account?
$lyncaccount = New-Object -ComObject wscript.shell
$intAnswer = $lyncaccount.popup("Does this user require a LYNC Account?", `
0,"Create LYNC Account",32+4)
If ($intAnswer -eq 6) {
Add-ADGroupMember -Identity "YourADGroupName6" -Member $samname
$lyncaccount.popup("User added to LYNC Provisioning Group", `
0,"Created",64+0)
} else {
$lyncaccount.popup("User has not been added to the LYNC Provisioning Group", `
0,"Not Created",64+0)
#Create Home Directory and Set Permissions on Home Directory
New-Item -path $homedirpath -type directory
$acl = Get-ACL -path $homedirpath
$permission = "yourdomainname\$($samname)","Modify","ContainerInherit,ObjectInherit","None","Allow"
$accessrule = new-object System.Security.AccessControl.FileSystemAccessRule $permission
$acl.SetAccessRule($accessrule)
$acl | Set-ACL -path $homedirpath
##Set Share Permissions on Home Directory
$Computer = $servername
$Class = "Win32_Share"
$Method = "Create"
$name = $sharename
$path = $sharedirpath
$description = ""
$sd = ([WMIClass] "\\$Computer\root\cimv2:Win32_SecurityDescriptor").CreateInstance()
$ACE = ([WMIClass] "\\$Computer\root\cimv2:Win32_ACE").CreateInstance()
$Trustee = ([WMIClass] "\\$Computer\root\cimv2:Win32_Trustee").CreateInstance()
$Trustee.Name = "EVERYONE"
$Trustee.Domain = $Null
$Trustee.SID = @(1, 1, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0)
$ace.AccessMask = 2032127
$ace.AceFlags = 3
$ace.AceType = 0
$ACE.Trustee = $Trustee
$sd.DACL += $ACE.psObject.baseobject
$mc = [WmiClass]"\\$Computer\ROOT\CIMV2:$Class"
$InParams = $mc.psbase.GetMethodParameters($Method)
$InParams.Access = $sd
$InParams.Description = $description
$InParams.MaximumAllowed = $Null
$InParams.Name = $name
$InParams.Password = $Null
$InParams.Path = $path
$InParams.Type = [uint32]0
$R = $mc.PSBase.InvokeMethod($Method, $InParams, $Null)
switch ($($R.ReturnValue))
0 {Write-Host "Share:$name Path:$path Result:Success"; break}
2 {Write-Host "Share:$name Path:$path Result:Access Denied" -foregroundcolor red -backgroundcolor yellow;break}
8 {Write-Host "Share:$name Path:$path Result:Unknown Failure" -foregroundcolor red -backgroundcolor yellow;break}
9 {Write-Host "Share:$name Path:$path Result:Invalid Name" -foregroundcolor red -backgroundcolor yellow;break}
10 {Write-Host "Share:$name Path:$path Result:Invalid Level" -foregroundcolor red -backgroundcolor yellow;break}
21 {Write-Host "Share:$name Path:$path Result:Invalid Parameter" -foregroundcolor red -backgroundcolor yellow;break}
22 {Write-Host "Share:$name Path:$path Result:Duplicate Share" -foregroundcolor red -backgroundcolor yellow;break}
23 {Write-Host "Share:$name Path:$path Result:Reedirected Path" -foregroundcolor red -backgroundcolor yellow;break}
24 {Write-Host "Share:$name Path:$path Result:Unknown Device or Directory" -foregroundcolor red -backgroundcolor yellow;break}
25 {Write-Host "Share:$name Path:$path Result:Network Name Not Found" -foregroundcolor red -backgroundcolor yellow;break}
default {Write-Host "Share:$name Path:$path Result:*** Unknown Error ***" -foregroundcolor red -backgroundcolor yellow;break}Would you be able to show me how it's done?
Here's an example:
$date = Read-Host 'Enter a date (e.g. 4/23/14)'
Write-Host "Original string: $date"
$dateTime = [datetime]$date
Write-Host "DateTime object: $dateTime"
Don't retire TechNet! -
(Don't give up yet - 12,830+ strong and growing) -
Problems creating AD resource accounts
Hi,
I have a problem at a customer site with creating Active Directory accounts.
If I change a AD attribute on a existing user (which is reconciled into idm system) it works fine, but if I want to create a new user via idm system it cannot be done.
After reading the gateway tracefile it seems like a problem with password policy, but it aint.......
The tracefile looks like this:
01/22/2007 15.36.05.753000 [4232] (../../../../src/wps/agent/logging/WSTrace.cpp,150): trace active, level: 3, file: gwytrace2.txt, maxSize: 1000000 KB
01/22/2007 15.36.05.753000 [4232] (../../../../src/wps/agent/logging/WSTrace.cpp,205): Trace file set to 'gwytrace2.txt'
01/22/2007 15.36.05.753000 [4232] (../../../../src/wps/agent/object/RequestHandler.cpp,118): Enter: reply
01/22/2007 15.36.05.753000 [4232] (../../../../src/wps/agent/object/RequestHandler.cpp,76): Enter: sendBuffer
01/22/2007 15.36.05.753000 [4232] (../../../../src/wps/agent/connect/RASecureConnection.cpp,110): SendPrivate: count: 776 pad: 4
01/22/2007 15.36.05.753000 [4232] (../../../../src/wps/agent/object/RequestHandler.cpp,105): Exit: sendBuffer
01/22/2007 15.36.05.753000 [4232] (../../../../src/wps/agent/object/RequestHandler.cpp,126): Exit: reply
01/22/2007 15.36.05.753000 [4232] (../../../../src/wps/agent/object/RequestHandler.cpp,562): Exit: ProcessCommand
01/22/2007 15.36.05.753000 [4232] (../../../../src/wps/agent/object/RequestHandler.cpp,699): Exit: handleRequest
01/22/2007 15.36.44.596000 [4232] (../../../../src/wps/agent/connect/client_handler.cpp,344): got 8860 bytes
01/22/2007 15.36.44.596000 [4232] (../../../../src/wps/agent/connect/RASecureConnection.cpp,260): ReceivePrivate: count: 8838, 8856 wrapped up rawlength 8854
01/22/2007 15.36.44.596000 [4232] (../../../../src/wps/agent/connect/RASecureConnection.cpp,269): Rightbefore decrypt:
01/22/2007 15.36.44.596000 [4232] (../../../../src/wps/agent/connect/RASecureConnection.cpp,34): KEY:[d0 ed d3 7c fd 32 57 21 ab fd 55 97 60 36 84 ad 64 05 6a bd fe a9 34 57 ]
01/22/2007 15.36.44.596000 [4232] (../../../../src/wps/agent/connect/RASecureConnection.cpp,110): SendPrivate: count: 0 pad: 4
01/22/2007 15.36.44.596000 [4232] (../../../../src/wps/agent/object/RequestHandler.cpp,567): Enter: handleRequest
01/22/2007 15.36.44.596000 [4232] (../../../../src/wps/agent/object/RequestHandler.cpp,636): command='get'
01/22/2007 15.36.44.596000 [4232] (../../../../src/wps/agent/object/RequestHandler.cpp,467): Enter: ProcessCommand
01/22/2007 15.36.44.596000 [4232] (../../../../src/wps/agent/adsi/ADSIExtension.cpp,6359): Enter: getObject
01/22/2007 15.36.44.596000 [4232] (../../../../src/wps/agent/adsi/ADSIExtension.cpp,5071): Enter: openObject
01/22/2007 15.36.44.596000 [4232] (../../../../src/wps/agent/adsi/ADSIExtension.cpp,2520): Enter: getIdentity(obj,result)
01/22/2007 15.36.44.596000 [4232] (../../../../src/wps/agent/adsi/ADSIExtension.cpp,2557): Enter: getIdentity
01/22/2007 15.36.44.596000 [4232] (../../../../src/wps/agent/adsi/ADSIExtension.cpp,2620): Exit: getIdentity
01/22/2007 15.36.44.596000 [4232] (../../../../src/wps/agent/adsi/ADSIExtension.cpp,2621): return value: 'LDAP://cn=frodo,ou=ABC-users,ou=Users,ou=ABC,dc=abc,dc=com'
01/22/2007 15.36.44.596000 [4232] (../../../../src/wps/agent/adsi/ADSIExtension.cpp,2544): Exit: getIdentity(obj,result)
01/22/2007 15.36.44.596000 [4232] (../../../../src/wps/agent/adsi/ADSIExtension.cpp,5086): Enter: openObject - 1
01/22/2007 15.36.44.596000 [4232] (../../../../src/wps/agent/adsi/ADSIExtension.cpp,5096): Enter: openObject - 2
01/22/2007 15.36.44.596000 [4232] (../../../../src/wps/agent/adsi/ADSIExtension.cpp,4667): Enter: login(wstring**,EncyptedData**,wstring**,WavesetResult&)
01/22/2007 15.36.44.596000 [4232] (../../../../src/wps/agent/adsi/ADSIExtension.cpp,4649): Enter: login(wstring**,EncyptedData**,wstring**,bool,HANDLE*,TOKEN_TYPE,WavesetResult&)
01/22/2007 15.36.44.596000 [4232] (../../../../src/wps/agent/object/Extension.cpp,34): Enter: getRequiredResAttrValue
01/22/2007 15.36.44.596000 [4232] (../../../../src/wps/agent/object/Extension.cpp,44): Exit: getRequiredResAttrValue
01/22/2007 15.36.44.596000 [4232] (../../../../src/wps/agent/object/Extension.cpp,34): Enter: getRequiredResAttrValue
01/22/2007 15.36.44.596000 [4232] (../../../../src/wps/agent/object/Extension.cpp,44): Exit: getRequiredResAttrValue
01/22/2007 15.36.44.596000 [4232] (../../../../src/wps/agent/adsi/ADSIExtension.cpp,4660): Login: 1
01/22/2007 15.36.44.596000 [4232] (../../../../src/wps/agent/adsi/ADSIExtension.cpp,4661): Exit: login(wstring**,EncyptedData**,wstring**,bool,HANDLE*,TOKEN_TYPE,WavesetResult&)
01/22/2007 15.36.44.596000 [4232] (../../../../src/wps/agent/adsi/ADSIExtension.cpp,4670): Login: 1
01/22/2007 15.36.44.596000 [4232] (../../../../src/wps/agent/adsi/ADSIExtension.cpp,4671): Exit: login(wstring**,EncyptedData**,wstring**,bool,HANDLE*,TOKEN_TYPE,WavesetResult&)
01/22/2007 15.36.44.596000 [4232] (../../../../src/wps/agent/adsi/ADSIExtension.cpp,5110): ADsGetObject for LDAP://cn=frodo,ou=ABC-users,ou=Users,ou=ABC,dc=abc,dc=com
01/22/2007 15.36.44.596000 [4232] (../../../../src/wps/agent/object/Extension.cpp,73): Enter: getOptionalResAttrValue
01/22/2007 15.36.44.596000 [4232] (../../../../src/wps/agent/object/Extension.cpp,77): Exit: getOptionalResAttrValue
01/22/2007 15.36.44.596000 [4232] (../../../../src/wps/agent/adsi/ADSIExtension.cpp,5188): Error opening object 'LDAP://cn=frodo,ou=ABC-users,ou=Users,ou=ABC,dc=abc,dc=com': ADsOpenObject(): 0X80072030: , 0000208D: NameErr: DSID-031001CD, problem 2001 (NO_OBJECT), data 0, best match of:
'OU=ABC-users,OU=Users,ou=ABC,dc=abc,dc=com'
, There is no such object on the server.
01/22/2007 15.36.44.596000 [4232] (../../../../src/wps/agent/adsi/ADSIExtension.cpp,5196): Exit: openObject - 2
01/22/2007 15.36.44.596000 [4232] (../../../../src/wps/agent/adsi/ADSIExtension.cpp,5089): Exit: openObject - 1
01/22/2007 15.36.44.596000 [4232] (../../../../src/wps/agent/adsi/ADSIExtension.cpp,5080): Exit: openObject
01/22/2007 15.36.44.596000 [4232] (../../../../src/wps/agent/adsi/ADSIExtension.cpp,2520): Enter: getIdentity(obj,result)
01/22/2007 15.36.44.596000 [4232] (../../../../src/wps/agent/adsi/ADSIExtension.cpp,2557): Enter: getIdentity
01/22/2007 15.36.44.596000 [4232] (../../../../src/wps/agent/adsi/ADSIExtension.cpp,2620): Exit: getIdentity
01/22/2007 15.36.44.596000 [4232] (../../../../src/wps/agent/adsi/ADSIExtension.cpp,2621): return value: 'LDAP://cn=frodo,ou=ABC-users,ou=Users,ou=ABC,dc=abc,dc=com'
01/22/2007 15.36.44.596000 [4232] (../../../../src/wps/agent/adsi/ADSIExtension.cpp,2544): Exit: getIdentity(obj,result)
01/22/2007 15.36.44.596000 [4232] (../../../../src/wps/agent/object/RequestHandler.cpp,118): Enter: reply
01/22/2007 15.36.44.596000 [4232] (../../../../src/wps/agent/object/RequestHandler.cpp,76): Enter: sendBuffer
01/22/2007 15.36.44.596000 [4232] (../../../../src/wps/agent/connect/RASecureConnection.cpp,110): SendPrivate: count: 1502 pad: 6
01/22/2007 15.36.44.596000 [4232] (../../../../src/wps/agent/object/RequestHandler.cpp,105): Exit: sendBuffer
01/22/2007 15.36.44.596000 [4232] (../../../../src/wps/agent/object/RequestHandler.cpp,126): Exit: reply
01/22/2007 15.36.44.596000 [4232] (../../../../src/wps/agent/adsi/ADSIExtension.cpp,6380): Exit: getObject - 1
01/22/2007 15.36.44.596000 [4232] (../../../../src/wps/agent/object/RequestHandler.cpp,562): Exit: ProcessCommand
01/22/2007 15.36.44.596000 [4232] (../../../../src/wps/agent/object/RequestHandler.cpp,699): Exit: handleRequest
01/22/2007 15.36.44.643000 [4232] (../../../../src/wps/agent/connect/client_handler.cpp,344): got 8164 bytes
01/22/2007 15.36.44.643000 [4232] (../../../../src/wps/agent/connect/RASecureConnection.cpp,260): ReceivePrivate: count: 8142, 8160 wrapped up rawlength 8158
01/22/2007 15.36.44.643000 [4232] (../../../../src/wps/agent/connect/RASecureConnection.cpp,269): Rightbefore decrypt:
01/22/2007 15.36.44.643000 [4232] (../../../../src/wps/agent/connect/RASecureConnection.cpp,34): KEY:[d0 ed d3 7c fd 32 57 21 ab fd 55 97 60 36 84 ad 64 05 6a bd fe a9 34 57 ]
01/22/2007 15.36.44.643000 [4232] (../../../../src/wps/agent/connect/RASecureConnection.cpp,110): SendPrivate: count: 0 pad: 4
01/22/2007 15.36.44.659000 [4232] (../../../../src/wps/agent/object/RequestHandler.cpp,567): Enter: handleRequest
01/22/2007 15.36.44.659000 [4232] (../../../../src/wps/agent/object/RequestHandler.cpp,636): command='create'
01/22/2007 15.36.44.659000 [4232] (../../../../src/wps/agent/object/RequestHandler.cpp,467): Enter: ProcessCommand
01/22/2007 15.36.44.659000 [4232] (../../../../src/wps/agent/adsi/ADSIExtension.cpp,4712): Enter: createObject
01/22/2007 15.36.44.659000 [4232] (../../../../src/wps/agent/adsi/ADSIExtension.cpp,4667): Enter: login(wstring**,EncyptedData**,wstring**,WavesetResult&)
01/22/2007 15.36.44.659000 [4232] (../../../../src/wps/agent/adsi/ADSIExtension.cpp,4649): Enter: login(wstring**,EncyptedData**,wstring**,bool,HANDLE*,TOKEN_TYPE,WavesetResult&)
01/22/2007 15.36.44.659000 [4232] (../../../../src/wps/agent/object/Extension.cpp,34): Enter: getRequiredResAttrValue
01/22/2007 15.36.44.659000 [4232] (../../../../src/wps/agent/object/Extension.cpp,44): Exit: getRequiredResAttrValue
01/22/2007 15.36.44.659000 [4232] (../../../../src/wps/agent/object/Extension.cpp,34): Enter: getRequiredResAttrValue
01/22/2007 15.36.44.659000 [4232] (../../../../src/wps/agent/object/Extension.cpp,44): Exit: getRequiredResAttrValue
01/22/2007 15.36.44.659000 [4232] (../../../../src/wps/agent/adsi/ADSIExtension.cpp,4660): Login: 1
01/22/2007 15.36.44.659000 [4232] (../../../../src/wps/agent/adsi/ADSIExtension.cpp,4661): Exit: login(wstring**,EncyptedData**,wstring**,bool,HANDLE*,TOKEN_TYPE,WavesetResult&)
01/22/2007 15.36.44.659000 [4232] (../../../../src/wps/agent/adsi/ADSIExtension.cpp,4670): Login: 1
01/22/2007 15.36.44.659000 [4232] (../../../../src/wps/agent/adsi/ADSIExtension.cpp,4671): Exit: login(wstring**,EncyptedData**,wstring**,bool,HANDLE*,TOKEN_TYPE,WavesetResult&)
01/22/2007 15.36.44.659000 [4232] (../../../../src/wps/agent/adsi/ADSIExtension.cpp,2520): Enter: getIdentity(obj,result)
01/22/2007 15.36.44.659000 [4232] (../../../../src/wps/agent/adsi/ADSIExtension.cpp,2557): Enter: getIdentity
01/22/2007 15.36.44.659000 [4232] (../../../../src/wps/agent/adsi/ADSIExtension.cpp,2620): Exit: getIdentity
01/22/2007 15.36.44.659000 [4232] (../../../../src/wps/agent/adsi/ADSIExtension.cpp,2621): return value: 'LDAP://cn=frodo,ou=ABC-users,ou=Users,ou=ABC,dc=abc,dc=com'
01/22/2007 15.36.44.659000 [4232] (../../../../src/wps/agent/adsi/ADSIExtension.cpp,2544): Exit: getIdentity(obj,result)
01/22/2007 15.36.44.659000 [4232] (../../../../src/wps/agent/adsi/ADSIExtension.cpp,2627): Enter: parseIdentity
01/22/2007 15.36.44.659000 [4232] (../../../../src/wps/agent/adsi/ADSIExtension.cpp,2370): Enter: getPathNameObject
01/22/2007 15.36.44.659000 [4232] (../../../../src/wps/agent/adsi/ADSIExtension.cpp,2387): Exit: getPathNameObject
01/22/2007 15.36.44.659000 [4232] (../../../../src/wps/agent/adsi/ADSIExtension.cpp,2675): Enter: parseIdentity
01/22/2007 15.36.44.659000 [4232] (../../../../src/wps/agent/adsi/ADSIExtension.cpp,5011): Enter: openContainer
01/22/2007 15.36.44.659000 [4232] (../../../../src/wps/agent/adsi/ADSIExtension.cpp,5012): Opening container 'LDAP://dc=com/dc=abc/ou=ABC/ou=Users/ou=ABC-users'
01/22/2007 15.36.44.659000 [4232] (../../../../src/wps/agent/object/Extension.cpp,73): Enter: getOptionalResAttrValue
01/22/2007 15.36.44.659000 [4232] (../../../../src/wps/agent/object/Extension.cpp,77): Exit: getOptionalResAttrValue
01/22/2007 15.36.44.659000 [4232] (../../../../src/wps/agent/adsi/ADSIExtension.cpp,5065): Exit: openContainer
01/22/2007 15.36.44.659000 [4232] (../../../../src/wps/agent/adsi/ADSIExtension.cpp,4765): Creating 'cn=frodo' with schema class 'User'
01/22/2007 15.36.44.659000 [4232] (../../../../src/wps/agent/adsi/ADSIExtension.cpp,12279): Enter: setDefaultUserAccountControl
01/22/2007 15.36.44.659000 [4232] (../../../../src/wps/agent/adsi/ADSIExtension.cpp,12292): Error getting user flag settings: 'Get(): 0X8000500D: E_ADS_PROPERTY_NOTFOUND,
01/22/2007 15.36.44.659000 [4232] (../../../../src/wps/agent/adsi/ADSIExtension.cpp,12312): Exit: setDefaultUserAccountControl
01/22/2007 15.36.44.659000 [4232] (../../../../src/wps/agent/adsi/ADSIExtension.cpp,2707): Enter: updateObjectAttrs
01/22/2007 15.36.44.721000 [4232] (../../../../src/wps/agent/adsi/ADSIExtension.cpp,3067): Unable to enable account: 'SetInfo(): 0X80072035: , 0000052D: SvcErr: DSID-031A0FC0, problem 5003 (WILL_NOT_PERFORM), data 0
, The server is unwilling to process the request.
01/22/2007 15.36.44.721000 [4232] (../../../../src/wps/agent/adsi/ADSIExtension.cpp,3867): Enter: setPassword(obj, ident, user, op, result)
01/22/2007 15.36.44.753000 [4232] (../../../../src/wps/agent/adsi/ADSIExtension.cpp,3948): Access denied returned from SetPassword()
01/22/2007 15.36.44.753000 [4232] (../../../../src/wps/agent/adsi/ADSIExtension.cpp,4036): Enter: setPassword(obj, dc, err, result)
01/22/2007 15.36.44.753000 [4232] (../../../../src/wps/agent/adsi/ADSIExtension.cpp,4131): Enter: getUsersDomainAndName
01/22/2007 15.36.44.753000 [4232] (../../../../src/wps/agent/adsi/ADSIExtension.cpp,4266): Enter: getSID
01/22/2007 15.36.44.784000 [4232] (../../../../src/wps/agent/adsi/ADSIExtension.cpp,4285): Return: 0x22a2f0
01/22/2007 15.36.44.784000 [4232] (../../../../src/wps/agent/adsi/ADSIExtension.cpp,4286): Exit: getSID
01/22/2007 15.36.44.799000 [4232] (../../../../src/wps/agent/adsi/ADSIExtension.cpp,4164): Unable to lookup SID: No mapping between account names and security IDs was done.
01/22/2007 15.36.44.799000 [4232] (../../../../src/wps/agent/adsi/ADSIExtension.cpp,4171): Exit: getUsersDomainAndName
01/22/2007 15.36.44.799000 [4232] (../../../../src/wps/agent/adsi/ADSIExtension.cpp,4122): Exit: setPassword(obj, dc, err, result)
01/22/2007 15.36.44.799000 [4232] (../../../../src/wps/agent/adsi/ADSIExtension.cpp,3987): While attempting to change the password, an 'Access is denied' error occured. This can indicate that the password does not meet the password policy requirements. Check the minimum password length, password complexity and password history requirements.
01/22/2007 15.36.44.799000 [4232] (../../../../src/wps/agent/adsi/ADSIExtension.cpp,4025): Exit: setPassword(obj, ident, user, op, result)
01/22/2007 15.36.44.799000 [4232] (../../../../src/wps/agent/adsi/ADSIExtension.cpp,6239): Enter: deleteObjectInternal
01/22/2007 15.36.44.799000 [4232] (../../../../src/wps/agent/adsi/ADSIExtension.cpp,5071): Enter: openObject
01/22/2007 15.36.44.799000 [4232] (../../../../src/wps/agent/adsi/ADSIExtension.cpp,2520): Enter: getIdentity(obj,result)
01/22/2007 15.36.44.799000 [4232] (../../../../src/wps/agent/adsi/ADSIExtension.cpp,2557): Enter: getIdentity
01/22/2007 15.36.44.799000 [4232] (../../../../src/wps/agent/adsi/ADSIExtension.cpp,2620): Exit: getIdentity
01/22/2007 15.36.44.799000 [4232] (../../../../src/wps/agent/adsi/ADSIExtension.cpp,2621): return value: 'LDAP://cn=frodo,ou=ABC-users,ou=Users,ou=ABC,dc=abc,dc=com'
01/22/2007 15.36.44.799000 [4232] (../../../../src/wps/agent/adsi/ADSIExtension.cpp,2544): Exit: getIdentity(obj,result)
01/22/2007 15.36.44.799000 [4232] (../../../../src/wps/agent/adsi/ADSIExtension.cpp,5086): Enter: openObject - 1
01/22/2007 15.36.44.799000 [4232] (../../../../src/wps/agent/adsi/ADSIExtension.cpp,5096): Enter: openObject - 2
01/22/2007 15.36.44.799000 [4232] (../../../../src/wps/agent/adsi/ADSIExtension.cpp,4667): Enter: login(wstring**,EncyptedData**,wstring**,WavesetResult&)
01/22/2007 15.36.44.799000 [4232] (../../../../src/wps/agent/adsi/ADSIExtension.cpp,4649): Enter: login(wstring**,EncyptedData**,wstring**,bool,HANDLE*,TOKEN_TYPE,WavesetResult&)
01/22/2007 15.36.44.799000 [4232] (../../../../src/wps/agent/object/Extension.cpp,34): Enter: getRequiredResAttrValue
01/22/2007 15.36.44.799000 [4232] (../../../../src/wps/agent/object/Extension.cpp,44): Exit: getRequiredResAttrValue
01/22/2007 15.36.44.799000 [4232] (../../../../src/wps/agent/object/Extension.cpp,34): Enter: getRequiredResAttrValue
01/22/2007 15.36.44.799000 [4232] (../../../../src/wps/agent/object/Extension.cpp,44): Exit: getRequiredResAttrValue
01/22/2007 15.36.44.799000 [4232] (../../../../src/wps/agent/adsi/ADSIExtension.cpp,4660): Login: 1
01/22/2007 15.36.44.799000 [4232] (../../../../src/wps/agent/adsi/ADSIExtension.cpp,4661): Exit: login(wstring**,EncyptedData**,wstring**,bool,HANDLE*,TOKEN_TYPE,WavesetResult&)
01/22/2007 15.36.44.799000 [4232] (../../../../src/wps/agent/adsi/ADSIExtension.cpp,4670): Login: 1
01/22/2007 15.36.44.799000 [4232] (../../../../src/wps/agent/adsi/ADSIExtension.cpp,4671): Exit: login(wstring**,EncyptedData**,wstring**,bool,HANDLE*,TOKEN_TYPE,WavesetResult&)
01/22/2007 15.36.44.799000 [4232] (../../../../src/wps/agent/adsi/ADSIExtension.cpp,5110): ADsGetObject for LDAP://cn=frodo,ou=ABC-users,ou=Users,ou=ABC,dc=abc,dc=com
01/22/2007 15.36.44.799000 [4232] (../../../../src/wps/agent/object/Extension.cpp,73): Enter: getOptionalResAttrValue
01/22/2007 15.36.44.799000 [4232] (../../../../src/wps/agent/object/Extension.cpp,77): Exit: getOptionalResAttrValue
01/22/2007 15.36.44.799000 [4232] (../../../../src/wps/agent/adsi/ADSIExtension.cpp,5196): Exit: openObject - 2
01/22/2007 15.36.44.799000 [4232] (../../../../src/wps/agent/adsi/ADSIExtension.cpp,5089): Exit: openObject - 1
01/22/2007 15.36.44.799000 [4232] (../../../../src/wps/agent/adsi/ADSIExtension.cpp,5080): Exit: openObject
01/22/2007 15.36.44.799000 [4232] (../../../../src/wps/agent/adsi/ADSIExtension.cpp,5096): Enter: openObject - 2
01/22/2007 15.36.44.799000 [4232] (../../../../src/wps/agent/adsi/ADSIExtension.cpp,4667): Enter: login(wstring**,EncyptedData**,wstring**,WavesetResult&)
01/22/2007 15.36.44.799000 [4232] (../../../../src/wps/agent/adsi/ADSIExtension.cpp,4649): Enter: login(wstring**,EncyptedData**,wstring**,bool,HANDLE*,TOKEN_TYPE,WavesetResult&)
01/22/2007 15.36.44.799000 [4232] (../../../../src/wps/agent/object/Extension.cpp,34): Enter: getRequiredResAttrValue
01/22/2007 15.36.44.799000 [4232] (../../../../src/wps/agent/object/Extension.cpp,44): Exit: getRequiredResAttrValue
01/22/2007 15.36.44.799000 [4232] (../../../../src/wps/agent/object/Extension.cpp,34): Enter: getRequiredResAttrValue
01/22/2007 15.36.44.799000 [4232] (../../../../src/wps/agent/object/Extension.cpp,44): Exit: getRequiredResAttrValue
01/22/2007 15.36.44.799000 [4232] (../../../../src/wps/agent/adsi/ADSIExtension.cpp,4660): Login: 1
01/22/2007 15.36.44.799000 [4232] (../../../../src/wps/agent/adsi/ADSIExtension.cpp,4661): Exit: login(wstring**,EncyptedData**,wstring**,bool,HANDLE*,TOKEN_TYPE,WavesetResult&)
01/22/2007 15.36.44.799000 [4232] (../../../../src/wps/agent/adsi/ADSIExtension.cpp,4670): Login: 1
01/22/2007 15.36.44.799000 [4232] (../../../../src/wps/agent/adsi/ADSIExtension.cpp,4671): Exit: login(wstring**,EncyptedData**,wstring**,bool,HANDLE*,TOKEN_TYPE,WavesetResult&)
01/22/2007 15.36.44.799000 [4232] (../../../../src/wps/agent/adsi/ADSIExtension.cpp,5110): ADsGetObject for LDAP://ou=ABC-users,ou=Users,ou=ABC,dc=abc,dc=com
01/22/2007 15.36.44.799000 [4232] (../../../../src/wps/agent/object/Extension.cpp,73): Enter: getOptionalResAttrValue
01/22/2007 15.36.44.799000 [4232] (../../../../src/wps/agent/object/Extension.cpp,77): Exit: getOptionalResAttrValue
01/22/2007 15.36.44.799000 [4232] (../../../../src/wps/agent/adsi/ADSIExtension.cpp,5196): Exit: openObject - 2
01/22/2007 15.36.44.831000 [4232] (../../../../src/wps/agent/adsi/ADSIExtension.cpp,6346): Exit: deleteObjectInternal
01/22/2007 15.36.44.831000 [4232] (../../../../src/wps/agent/adsi/ADSIExtension.cpp,3096): Exit: updateObjectAttrs
01/22/2007 15.36.44.831000 [4232] (../../../../src/wps/agent/object/RequestHandler.cpp,118): Enter: reply
01/22/2007 15.36.44.831000 [4232] (../../../../src/wps/agent/object/RequestHandler.cpp,76): Enter: sendBuffer
01/22/2007 15.36.44.831000 [4232] (../../../../src/wps/agent/connect/RASecureConnection.cpp,110): SendPrivate: count: 2966 pad: 6
01/22/2007 15.36.44.831000 [4232] (../../../../src/wps/agent/object/RequestHandler.cpp,105): Exit: sendBuffer
01/22/2007 15.36.44.831000 [4232] (../../../../src/wps/agent/object/RequestHandler.cpp,126): Exit: reply
01/22/2007 15.36.44.831000 [4232] (../../../../src/wps/agent/adsi/ADSIExtension.cpp,4868): Exit: createObject - 1
01/22/2007 15.36.44.831000 [4232] (../../../../src/wps/agent/object/RequestHandler.cpp,562): Exit: ProcessCommand
01/22/2007 15.36.44.831000 [4232] (../../../../src/wps/agent/object/RequestHandler.cpp,699): Exit: handleRequest
01/22/2007 15.37.33.206000 [4232] (../../../../src/wps/agent/connect/client_handler.cpp,344): got 6988 bytes
01/22/2007 15.37.33.206000 [4232] (../../../../src/wps/agent/connect/RASecureConnection.cpp,260): ReceivePrivate: count: 6970, 6984 wrapped up rawlength 6986
01/22/2007 15.37.33.206000 [4232] (../../../../src/wps/agent/connect/RASecureConnection.cpp,269): Rightbefore decrypt:
01/22/2007 15.37.33.206000 [4232] (../../../../src/wps/agent/connect/RASecureConnection.cpp,34): KEY:[d0 ed d3 7c fd 32 57 21 ab fd 55 97 60 36 84 ad 64 05 6a bd fe a9 34 57 ]
01/22/2007 15.37.33.206000 [4232] (../../../../src/wps/agent/connect/RASecureConnection.cpp,110): SendPrivate: count: 0 pad: 4
01/22/2007 15.37.33.206000 [4232] (../../../../src/wps/agent/object/RequestHandler.cpp,567): Enter: handleRequest
01/22/2007 15.37.33.206000 [4232] (../../../../src/wps/agent/object/RequestHandler.cpp,636): command='get file'
01/22/2007 15.37.33.206000 [4232] (../../../../src/wps/agent/object/RequestHandler.cpp,467): Enter: ProcessCommand
01/22/2007 15.37.33.206000 [4232] (../../../../src/wps/agent/object/Extension.cpp,424): Enter: getFile
01/22/2007 15.37.33.221000 [4232] (../../../../src/wps/agent/object/RequestHandler.cpp,118): Enter: reply
01/22/2007 15.37.33.221000 [4232] (../../../../src/wps/agent/object/RequestHandler.cpp,76): Enter: sendBuffer
01/22/2007 15.37.33.221000 [4232] (../../../../src/wps/agent/connect/RASecureConnection.cpp,110): SendPrivate: count: 366 pad: 6
01/22/2007 15.37.33.221000 [4232] (../../../../src/wps/agent/object/RequestHandler.cpp,105): Exit: sendBuffer
01/22/2007 15.37.33.221000 [4232] (../../../../src/wps/agent/object/RequestHandler.cpp,126): Exit: reply
01/22/2007 15.37.33.221000 [4232] (../../../../src/wps/agent/object/Extension.cpp,623): Exit: getFile
01/22/2007 15.37.33.221000 [4232] (../../../../src/wps/agent/object/RequestHandler.cpp,562): Exit: ProcessCommand
01/22/2007 15.37.33.221000 [4232] (../../../../src/wps/agent/object/RequestHandler.cpp,699): Exit: handleRequest
01/22/2007 15.37.33.284000 [4232] (../../../../src/wps/agent/connect/client_handler.cpp,344): got 7020 bytes
01/22/2007 15.37.33.284000 [4232] (../../../../src/wps/agent/connect/RASecureConnection.cpp,260): ReceivePrivate: count: 6996, 7016 wrapped up rawlength 7012
01/22/2007 15.37.33.284000 [4232] (../../../../src/wps/agent/connect/RASecureConnection.cpp,269): Rightbefore decrypt:
01/22/2007 15.37.33.284000 [4232] (../../../../src/wps/agent/connect/RASecureConnection.cpp,34): KEY:[d0 ed d3 7c fd 32 57 21 ab fd 55 97 60 36 84 ad 64 05 6a bd fe a9 34 57 ]
01/22/2007 15.37.33.284000 [4232] (../../../../src/wps/agent/connect/RASecureConnection.cpp,110): SendPrivate: count: 0 pad: 4
01/22/2007 15.37.33.284000 [4232] (../../../../src/wps/agent/object/RequestHandler.cpp,567): Enter: handleRequest
01/22/2007 15.37.33.284000 [4232] (../../../../src/wps/agent/object/RequestHandler.cpp,636): command='get file'
01/22/2007 15.37.33.284000 [4232] (../../../../src/wps/agent/object/RequestHandler.cpp,467): Enter: ProcessCommand
01/22/2007 15.37.33.284000 [4232] (../../../../src/wps/agent/object/Extension.cpp,424): Enter: getFile
01/22/2007 15.37.33.284000 [4232] (../../../../src/wps/agent/object/RequestHandler.cpp,76): Enter: sendBuffer
01/22/2007 15.37.33.284000 [4232] (../../../../src/wps/agent/connect/RASecureConnection.cpp,110): SendPrivate: count: 21659 pad: 1
01/22/2007 15.37.33.284000 [4232] (../../../../src/wps/agent/object/RequestHandler.cpp,105): Exit: sendBuffer
01/22/2007 15.37.33.284000 [4232] (../../../../src/wps/agent/object/Extension.cpp,623): Exit: getFile
01/22/2007 15.37.33.284000 [4232] (../../../../src/wps/agent/object/RequestHandler.cpp,562): Exit: ProcessCommand
01/22/2007 15.37.33.284000 [4232] (../../../../src/wps/agent/object/RequestHandler.cpp,699): Exit: handleRequest
01/22/2007 15.37.33.331000 [4232] (../../../../src/wps/agent/connect/client_handler.cpp,344): got 7020 bytes
01/22/2007 15.37.33.331000 [4232] (../../../../src/wps/agent/connect/RASecureConnection.cpp,260): ReceivePrivate: count: 6996, 7016 wrapped up rawlength 7012
01/22/2007 15.37.33.331000 [4232] (../../../../src/wps/agent/connect/RASecureConnection.cpp,269): Rightbefore decrypt:
01/22/2007 15.37.33.331000 [4232] (../../../../src/wps/agent/connect/RASecureConnection.cpp,34): KEY:[d0 ed d3 7c fd 32 57 21 ab fd 55 97 60 36 84 ad 64 05 6a bd fe a9 34 57 ]
01/22/2007 15.37.33.331000 [4232] (../../../../src/wps/agent/connect/RASecureConnection.cpp,110): SendPrivate: count: 0 pad: 4
01/22/2007 15.37.33.331000 [4232] (../../../../src/wps/agent/object/RequestHandler.cpp,567): Enter: handleRequest
01/22/2007 15.37.33.331000 [4232] (../../../../src/wps/agent/object/RequestHandler.cpp,636): command='get file'
01/22/2007 15.37.33.331000 [4232] (../../../../src/wps/agent/object/RequestHandler.cpp,467): Enter: ProcessCommand
01/22/2007 15.37.33.331000 [4232] (../../../../src/wps/agent/object/Extension.cpp,424): Enter: getFile
01/22/2007 15.37.33.331000 [4232] (../../../../src/wps/agent/object/RequestHandler.cpp,118): Enter: reply
01/22/2007 15.37.33.331000 [4232] (../../../../src/wps/agent/object/RequestHandler.cpp,76): Enter: sendBuffer
01/22/2007 15.37.33.331000 [4232] (../../../../src/wps/agent/connect/RASecureConnection.cpp,110): SendPrivate: count: 176 pad: 4
01/22/2007 15.37.33.331000 [4232] (../../../../src/wps/agent/object/RequestHandler.cpp,105): Exit: sendBuffer
01/22/2007 15.37.33.331000 [4232] (../../../../src/wps/agent/object/RequestHandler.cpp,126): Exit: reply
01/22/2007 15.37.33.331000 [4232] (../../../../src/wps/agent/object/Extension.cpp,623): Exit: getFile
01/22/2007 15.37.33.331000 [4232] (../../../../src/wps/agent/object/RequestHandler.cpp,562): Exit: ProcessCommand
01/22/2007 15.37.33.331000 [4232] (../../../../src/wps/agent/object/RequestHandler.cpp,699): Exit: handleRequest
01/22/2007 15.37.33.393000 [4232] (../../../../src/wps/agent/connect/client_handler.cpp,344): got 7044 bytes
01/22/2007 15.37.33.393000 [4232] (../../../../src/wps/agent/connect/RASecureConnection.cpp,260): ReceivePrivate: count: 7022, 7040 wrapped up rawlength 7038
01/22/2007 15.37.33.393000 [4232] (../../../../src/wps/agent/connect/RASecureConnection.cpp,269): Rightbefore decrypt:
01/22/2007 15.37.33.393000 [4232] (../../../../src/wps/agent/connect/RASecureConnection.cpp,34): KEY:[d0 ed d3 7c fd 32 57 21 ab fd 55 97 60 36 84 ad 64 05 6a bd fe a9 34 57 ]
01/22/2007 15.37.33.393000 [4232] (../../../../src/wps/agent/connect/RASecureConnection.cpp,110): SendPrivate: count: 0 pad: 4
01/22/2007 15.37.33.409000 [4232] (../../../../src/wps/agent/object/RequestHandler.cpp,567): Enter: handleRequest
01/22/2007 15.37.33.409000 [4232] (../../../../src/wps/agent/object/RequestHandler.cpp,636): command='get file'
01/22/2007 15.37.33.409000 [4232] (../../../../src/wps/agent/object/RequestHandler.cpp,467): Enter: ProcessCommand
01/22/2007 15.37.33.409000 [4232] (../../../../src/wps/agent/object/Extension.cpp,424): Enter: getFile
01/22/2007 15.37.33.409000 [4232] (../../../../src/wps/agent/object/Extension.cpp,453): Unable to find matching handle.
01/22/2007 15.37.33.409000 [4232] (../../../../src/wps/agent/object/Extension.cpp,490): Get file operation with no or unknown handle aborted.
01/22/2007 15.37.33.409000 [4232] (../../../../src/wps/agent/object/RequestHandler.cpp,118): Enter: reply
01/22/2007 15.37.33.409000 [4232] (../../../../src/wps/agent/object/RequestHandler.cpp,76): Enter: sendBuffer
01/22/2007 15.37.33.409000 [4232] (../../../../src/wps/agent/connect/RASecureConnection.cpp,110): SendPrivate: count: 850 pad: 2
01/22/2007 15.37.33.409000 [4232] (../../../../src/wps/agent/object/RequestHandler.cpp,105): Exit: sendBuffer
01/22/2007 15.37.33.409000 [4232] (../../../../src/wps/agent/object/RequestHandler.cpp,126): Exit: reply
01/22/2007 15.37.33.409000 [4232] (../../../../src/wps/agent/object/Extension.cpp,623): Exit: getFile
01/22/2007 15.37.33.409000 [4232] (../../../../src/wps/agent/object/RequestHandler.cpp,562): Exit: ProcessCommand
01/22/2007 15.37.33.409000 [4232] (../../../../src/wps/agent/object/RequestHandler.cpp,699): Exit: handleRequest
01/22/2007 15.37.40.534000 [4232] (../../../../src/wps/agent/connect/client_handler.cpp,344): got 9028 bytes
01/22/2007 15.37.40.534000 [4232] (../../../../src/wps/agent/connect/RASecureConnection.cpp,260): ReceivePrivate: count: 9010, 9024 wrapped up rawlength 9026
01/22/2007 15.37.40.534000 [4232] (../../../../src/wps/agent/connect/RASecureConnection.cpp,269): Rightbefore decrypt:
01/22/2007 15.37.40.534000 [4232] (../../../../src/wps/agent/connect/RASecureConnection.cpp,34): KEY:[d0 ed d3 7c fd 32 57 21 ab fd 55 97 60 36 84 ad 64 05 6a bd fe a9 34 57 ]
01/22/2007 15.37.40.534000 [4232] (../../../../src/wps/agent/connect/RASecureConnection.cpp,110): SendPrivate: count: 0 pad: 4
01/22/2007 15.37.40.534000 [4232] (../../../../src/wps/agent/object/RequestHandler.cpp,567): Enter: handleRequest
01/22/2007 15.37.40.534000 [4232] (../../../../src/wps/agent/objectHi,
I am getting the same error. I am running gateway with a user which has admin capabilities. The gateway trace log shows the same error and in IdM admin interface the error is showing as,
Unable to set user info: SetInfo(): 0x80071392: , 00000524: UpdErr: DSID-031A0F4F, problem 6005 (ENTRY_EXIST), data 0, The object already exists.
Actually what I am doing is,
Through flat file active sync, I created a user (abc) under People-->test1 organization unit and also a user(abc) got created in IdM too.
My requirement is now I need to create a user(abc-test) in People organizational unit through IdM user interface. In the end user interface, I have only one text filed and a create button, in that text field I have to give accountId (i.e. abc).
In this workflow I changed the identity, fullname,sAmAccountName and User Principal Name but still the same error.
I don't understand where the problem exists or it may be due to ObjectGuid?
if anybody knows the solution, kindly give any ideas.
Thanks -
Create Activities from Campaign
Hi,
I intend to create Activity from Campaign based on the Partners selected in the Partners tab.
For 5 different partners, 5 different activities.
I am trying this through Action definition, method call.
Am I on the right path? Is this how normally its done?
thanks
YashHi Mike,
Thanks for the link.
I already have this doc with me.
This talks about creating a transaction type which is assigned based on Communication channel.
My requirement is to create a transaction type based on the Partners in the Partner tab.
I have awarded points though.
thanks
Yash -
Create a User account in active directory from SharePoint online 2013 list data
Hello,
I am trying to create a SharePoint list through which i can create a user account into active directory,
1 - HR is sending the detail in the email body to a Specific email address ([email protected]) like below..
First Name: XYZ
Last Name: ABC
Address: ABC 123
Designation: Analyst
Employee ID: 10492
and so on
2 - I need to pickup every new email data of the above section into sharepoint list (in Column)
First Name Last Name Address Designation Employee ID
3 - I want to create a event receiver through which i can go ahead and find the new data in the list and then create a user in the active directory,
I tried very hard and since i dont have much experience in coding part, any help will be highly appreciated
Thank you
Aman1- Configure Incoming Email Setting at your SharePoint Farm -
https://technet.microsoft.com/en-us/library/cc262947.aspx
http://blogs.technet.com/b/harmeetw/archive/2012/12/29/sharepoint-2013-configure-incoming-emails-with-exchange-server-2013.aspx
2- Configure your Sharepoint List Incoming e-mail settings for [email protected] - ListSetting-Communications->Incoming e-mail settings. -
https://support.office.com/en-in/article/Enable-and-configure-e-mail-support-for-a-list-or-library-dcaf44a0-1d9b-451a-84c7-6c52e7db908e
3- Write an Incoming Email Receiver , and Add you Email Body Parsing Code (retrive value of fields , firstname , lastname etc) in
EmailReceived() method. also add the code for adding new user in Active Directory
http://blogs.msdn.com/b/tejasr/archive/2010/03/06/event-handler-code-to-add-incoming-emails-with-subject-discussion-id-as-replies.aspx
https://pholpar.wordpress.com/2010/01/13/creating-a-simple-email-receiver-for-a-document-library/
4- Active Directory Code Help -
http://www.codeproject.com/Articles/18102/Howto-Almost-Everything-In-Active-Directory-via-C
http://www.codeproject.com/Tips/534718/Add-User-to-Active-Directory
Thanks
Ganesh Jat [My Blog |
LinkedIn | Twitter ]
Please click 'Mark As Answer' if a post solves your problem or 'Vote As Helpful' if it was useful. -
How can I create a POP3 account on my iPad for Live Mail which doesn't delete mail from server?
Got a new iPad Air with iOS 7.1.1 tried to create a mail account just like the one on my iPhone 5. I selected 'Other' as mail account which allows me to edit the POP3 and SMTP settings. Think it sends mail ok need to check out receiving BUT there is no longer the option under INCOMING MAIL which says 'Delete from Server' which I have on my iPhone set to 'Never'.
Anyone know how or what settings to use for the iPad?
ThanksYes, you're correct this is only for existing users so if you don't have a Gmail account then do as shldr2thewheel suggested.
You'll then be able to link up to your Gmail account in your iPad once done.
Regards,
Steve
Maybe you are looking for
-
Create Folder with DDX in PDF Portfolio or add files to Folder
can I create folders in a PDF file same as we do with the Adobe Acrobat Portfolio using only DDX? I tried using PackageFiles, but had no results.
-
Hello All! I'm looking for a little help on an exact problem that seems to have been solved here before (but doesn't work for me). Here's the original archived thread: https://discussions.apple.com/thread/2631967?start=0&tstart=0 The question asked i
-
How do I get my scanner functions back on new Windows 8 laptop?
Finally got my Pixma MX 420 into my wireless network with new laptop and Windows 8. I can't find the scanner functions like it had before on two of my old computers. How do I get the scanner window back?
-
How to process huge files using File Adapter without ESR and no FCC?
Hi All, I came to a scenario where i need to pick the file from R/3 sys which of around 500MB and need to transport it to the Third party sys using PI 7.1 . This is just simply a pass through data i.e.., no mapping is required (no ESR). and i don't t
-
ADF: JBO-25009: Cannot create an object of type:java.math.Bi. Jdev 11.1.2.3
Hi, I have created a tree structure on the left side of the page and a table on the right hand of the page. My requirement is that when I click on the node on the left side, the table on the right needs to be refreshed. For the time being the tree no